β-Cyclodextrin-modified three-dimensional graphene oxide-wrapped melamine foam for the solid-phase extraction of flavonoids

A stable core-shell metal-organic framework@covalent organic framework composite as solid-phase extraction adsorbent for selective enrichment and determination of flavonoids

Hydrophobization and stability is crucial for the practical application of most metal-organic frameworks (MOFs) in extraction technique. In this study, a stable core-shell MOF@COF composite (NH2-MIL-101(Fe)@TAPB-FPBA-COF) was successfully prepared by Schiff base reaction and applied to solid-phase extraction (SPE) of hydrophobic flavonoids. Notably, the TAPB-FPBA-COF shell acts as a hydrophobic "shield", which not only improves the hydrophobicity and stability of hydrophilic NH2-MIL-101(Fe), but also makes the extraction efficiency of flavonoids from MOF@COF composite significantly higher than that of pure NH2-MIL-101(Fe) and TAPB-FPBA-COF. In addition, a sensitive analytical method with excellent linearities (0.1-500 ng mL-1, R2 ≥ 0.9967), low limits of detection (0.02-0.04 ng mL-1 for water; 0.04-0.07 ng mL-1 for grape juice; 0.06-0.08 ng mL-1 for honey), good repeatability (intra-day/inter-day precision are 1.86-5.37%/1.82-7.79%, respectively) and only 5 mg of adsorbent per cartridge was established by optimizing the SPE process combined with high performance liquid chromatography with ultraviolet-visible detector (HPLC-UV). Meanwhile, selectivity study and comparative experiments with the commercial C18 adsorbent showed that the MOF@COF adsorbent exhibited satisfactory extraction efficiency for flavonoids due to multiple interactions such as hydrogen bonding, hydrophobic, and π-π interactions. Finally, the good recoveries in grape juice (84.5-102.5%) and honey (87.5-104.6%) samples further validated the applicability of the proposed method in complex samples.

Reduced Graphene Oxide as a Platform for the Immobilization of Amino-Cyclodextrins

In the present work, we reported on a method to combine amino β-cyclodextrins (CD1) with reduced graphene oxide (obtained by the electrochemical reduction of graphene oxide, erGO) to produce a glassy carbon electrode (GCE) modified with both CD1 and erGO (CD1-erGO/GCE). This procedure avoids the use of organic solvents such as hydrazine or long reaction times and high temperatures. The material combining both CD1 and erGO (CD1-erGO/GCE) was characterized by SEM, ATR-FTIR, Raman, XPS, and electrochemical techniques. As proof-of-concept, the determination of the pesticide carbendazim was carried out. The spectroscopic measurements, especially XPS, proved that CD1 was covalently attached to the surface of the erGO/GCE electrode. The attachment of cyclodextrin at the reduced graphene oxide produced an increase in the electrochemical behavior of the electrode. The cyclodextrin-functionalized reduced graphene oxide, CD1-erGO/GCE, showed a larger sensitivity (1.01 μA/μM) and a lower limit of detection for carbendazim (LOD = 0.50 μM) compared with the non-functionalized material, erGO/GCE, (sensitivity = 0.63 μA/μM and LOD = 4.32 μM, respectively). Overall, the results of the present work show that this simple method is suitable to attach cyclodextrins to graphene oxide, maintaining their inclusion abilities.

One-step fabrication of hydrophobic metal-organic framework@covalent organic framework hybrid as sorbent for high-performance solid-phase extraction of flavonoids

Metal-organic framework (MOF) and covalent organic framework (COF) exhibit excellent extraction performance in sample pretreatment, but their wider application is hindered by some inherent drawbacks. Herein, we successfully synthesized a novel MOF@COF hybrid material with large specific surface area, good chemical stability and reusability, which is suitable as a solid phase extraction (SPE) sorbent for the efficient extraction of flavonoids. Importantly, due to the synergistic effect, the obtained MOF@COF hybrid material showing a higher extraction efficiency than individual MOF and COF. This is mainly due to the obtained MOF@COF hybrid material combines the high specific surface area of MOF and multiple interactions (hydrophobic interaction, hydrogen bonding and π-π stacking interaction) with flavonoids conferred by the COF structure. Then, a sensitive analytical method for flavonoids with ideal linear range (1-500 ng mL^-1), low detection limit (0.15-0.41 ng mL^-1) and good repeatability (2.64-6.20%) was developed under optimized conditions. In addition, the MOF@COF hybrid sorbent has better selectivity for hydrophobic targets containing multiple hydrogen bond acceptors/donors. Finally, the established method was applied to the determination of flavonoids in different food samples, and satisfactory recoveries (81.4-102.1%) were obtained, which initially confirmed its applicability.

Influence of host-guest interactions on analytical performance of direct analysis in real-time mass spectrometry

To systematically study the influence of host-guest interactions on the analytical performance of direct analysis in real time mass spectrometry (DART-MS), the interactions between cyclodextrins (CDs) and different Sudan dyes were investigated. The results showed that the host-guest interaction between CDs and Sudan dyes did not affect qualitative analysis of the target compounds, but led to a lower signal intensity for Sudan dyes, thus affecting quantitative analysis of the target compounds. The stronger the host-guest interaction, the weaker the signal intensity of target compound on DART-MS. The results also show that both in solution and in solid-phase microextraction (SPME), the addition of organic solvents can weaken the host-guest interaction between CDs and Sudan dyes, thus improving the signal intensity in DART-MS. In SPME, adding organic solvents has a certain practical value and can improve the efficiency of Sudan dye analysis. This study suggests that appropriate sample pretreatment is needed to weaken noncovalent interactions prior to DART-MS analysis to obtain more accurate quantitative results. The data provide some insight into the effects of other noncovalent interactions on the efficiency of DART-MS as an analytical tool, as well as the potential to study intermolecular interactions with DART-MS.

Recent Advances of Triazine-Based Materials for Adsorbent Based Extraction Techniques

This review mainly focused on the synthesis and properties of triazine-based materials as well as the state-of-the-art development of these materials in adsorption-based extraction techniques in the past 5 years, such as solid-phase extraction, magnetic solid-phase extraction, solid-phase microextraction and stir bar sorptive extraction, and the detection of various pollutants, including metal ions, drugs, estrogens, nitroaromatics, pesticides, phenols, polycyclic aromatic hydrocarbons and parabens. In the triazine-functionalized composites, triazine-based polymers and covalent triazine frameworks have been developed as the adsorbents with potential for environmental pollutants, mainly relying on the large surface area and the affinity of triazinyl groups with the targets. Triazine-based adsorbents have satisfactory sensitivity and selectivity towards different types of analytes, attributed from various mechanisms including π-π, electrostatics, hydrogen bonds, and hydrophobic and hydrophilic effects. The prospects of the materials for adsorption-based extraction were also presented, which can offer an outlook for the further development and applications.

Application of micro/nanomaterials in adsorption and sensing of active ingredients in traditional Chinese medicine

Traditional Chinese medicine (TCM) has been widely applied for the prevention and cure of various diseases for centuries. Ingredient with pharmacological activity is the key to the application of TCM. Hence, it is of significance to separate and detect active ingredients in TCM effectively. Micro/nanomaterial is the promising candidate for adsorption and sensing due to its unique physical and chemical properties. For years, many efforts have been made to develop functional micro/nanomaterials to realize the effective adsorption or sensing of bioactive compounds in TCM. In this review, we discussed recent progresses in the application of various functional micro/nanomaterials for adsorption or detection (electrochemical detection, fluorescent detection, and colorimetric detection) of active ingredients. Based on the kind of matrix materials, micro/nano-adsorbents or sensors can be classified into following categories: metal-based micro/nanomaterials, porous materials, carbon-based materials, graphene/graphite-liked micro/nanomaterials and hybrid micro/nanomaterials.

Sponges and Sponge-Like Materials in Sample Preparation: A Journey from Past to Present and into the Future

Even though instrumental advancements are constantly being made in analytical chemistry, sample preparation is still considered the bottleneck of analytical methods. To this end, researchers are developing new sorbent materials to improve and replace existing ones, with the ultimate goal to improve current methods and make them more efficient and effective. A few years ago, an alternative trend was started toward sample preparation: the use of sponge or sponge-like materials. These materials possess favorable characteristics, such as negligible weight, open-hole structure, high surface area, and variable surface chemistry. Although their use seemed promising, this trend soon reversed, due to either the increasing use of nanomaterials in sample preparation or the limited scope of the first materials. Currently, with the development of new materials, such as melamine sponges, along with the advancement in nanotechnology, this topic was revived, and various functionalizations were carried out on such materials. The new materials are used as sorbents in sample preparation in analytical chemistry. This review explores the development of such materials, from the past to the present and into the future, as well as their use in analytical chemistry.

Magnetic N-doped 3D graphene-like framework carbon for extraction of cephalexin monohydrate and ceftiofur hydrochloride

Magnetic N-doped 3D graphene-like framework carbon (Fe₃O₄@N-3DFC) was prepared via direct pyrolysis of sodium citrate and further hydrothermal reaction, and employed in the extraction of two cephalosporin antibiotics including cephalexin monohydrate and ceftiofur hydrochloride. The scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectrometry, X-ray photoelectron spectroscopy and X-ray diffraction were employed to confirm the successful synthesis of 3DFC-based adsorbents (3DFCs) including 3DFC, Fe₃O₄@3DFC and Fe₃O₄@N-3DFC. Fe₃O₄@N-3DFC sorbent with 3D graphene-like honeycomb architecture combined magnetic and N doping shows the attractive features including graphene carbon sheets, hierarchical porous structure, good wettability and higher surface affinity for cephalosporin antibiotics. Furthermore, the comparison of extraction efficiency with raw 3DFC and Fe₃O₄@3DFC sorbent also confirmed the superiority of Fe₃O₄@N-3DFC sorbent. Under optimized conditions, good linearity lines were obtained with the determination coefficients from 0.9953 to 0.9995. The limit of detections were in the range of 0.20-0.45 μg L^-1 and 0.03-0.10 μg L^-1 for cephalexin and ceftiofur, respectively. The spiked extraction recoveries were between 81.59% and 98.35% with the relative standard deviation values less than 6.98%. Combined with high performance liquid chromatography, Fe₃O₄@N-3DFC based magnetic solid-phase extraction was successfully applied in river water and zebrafish samples analysis.

Preparation of novel molecularly imprinted magnetic graphene oxide and their application for quercetin determination

In this work, quercetin (Que) molecular imprinted polymer (MIP) material decorated on magnetic graphene oxide (MGO) with high performance was prepared for the first time using a surface-imprinting technique. Magnetic graphene oxide was synthesized using the solvothermal route. Methacrylic acid (MAA) was used as functional monomer, ethylene glycol dimethyl acrylate (EGDMA) as cross-linker; Que. was used as template, for the decoration with MIP. The prepared nanocomposite was examined by different characterization methods including fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), vibrating sample magnetometer (VSM). The adsorption performance was investigated. MGO-MIP was found to have high loading (369 mg g^-1) and selective capacity making the nanomaterial more performant than previous similar reported nanomaterials. The determination of Que. was carried out by mean of magnetic solid phase extraction method coupled with high-performance liquid chromatography (HPLC) and the extraction conditions studies were also performed out. Under the optimized conditions, MGO-MIP showed great performance for the extraction, separation and determination of Que. in green tea and serum samples, compared to the flavonoid analogs luteolin (Lut) and rutin (Rut) in the same matrix samples.