Poly[(2-(acryloyloxy) ethyl]trimethylammonium chloride-co -ethylene dimethacrylate monolith on-line solid-phase extraction coupled with liquid chromatography and tandem mass spectrometry for the fast determination of salicylic acid in foodstuffs

Demonstration of protein capture and separation using three-dimensional printed anion exchange monoliths fabricated in one-step

Three-dimensional printing applications in separation science are currently limited by the lack of materials compatible with chromatographic operations and three-dimensional printing technologies. In this work, we propose a new material for Digital Light Processing printing to fabricate functional ion exchange monoliths in a single step. Through copolymerization of the bifunctional monomer [2-(acryloyloxy)ethyl] trimethylammonium chloride, monolithic structures with quaternary amine ligands were fabricated. The novel formulation was optimized in terms of protein binding and recovery, microporous structure, and its swelling susceptibility by increasing its cross-link density and employing cyclohexanol and dodecanol as pore forming agents. In static conditions, the material demonstrated a maximum binding capacity of 104.2 ± 10.6 mg/mL for bovine serum albumin, in line with commercially available materials. Its anion exchange behavior was validated by separating bovine serum albumin and myoglobin on a monolithic bed with Schoen gyroid morphology. The same column geometry was tested for the purification of C-phycocyanin from clarified as well as cell-laden Arthrospira platensis feedstocks. This represents the first demonstration of one-step printed stationary phases to capture proteins directly from solid-laden feedstocks. We believe that the material presented here represents a significant improvement towards implementation of three-dimensional printed chromatography media in the field of separation science.

A poly(N,N-dimethylaminoethyl methacrylate-co-ethylene glycol dimethacrylate) monolith for direct solid-phase extraction of benzodiazepines from undiluted human urine

A novel polymeric monolith using N,N-dimethylaminoethyl methacrylate as the monomer and ethylene glycol dimethacrylate as the crosslinker was successfully synthesized in a syringe and applied for direct solid-phase extraction of four benzodiazepines (bromazepam, triazolam, midazolam and diazepam) from undiluted urine samples prior to high performance liquid chromatography. The monolith was characterized by scanning electron microscopy, Fourier transform infrared spectroscopy and nitrogen adsorption-desorption experiments. Moreover, extraction parameters, including loading, washing and eluting conditions were optimized. Under the optimized conditions, the proposed method obtained linear ranges of 2.0-500 ng mL^-1 with correlation coefficients (r) higher than 0.9997. The limits of detection (S/N = 3) and limits of quantification (S/N = 10) were 0.4-0.6 ng mL^-1 and 1.4-2.0 ng mL^-1, respectively. The recoveries at three spiked levels ranged from 83.7% to 103% with the intra- and inter-day precisions from 0.6-7.6% to 2.7-9.8%. The present monolith allowed direct loading of crude urine samples without any filtration or dilution step. Besides, the sorbent offered an enhancement factor of 16.7-20.6 and was stable enough for ten replicate cycles of extraction/desorption of urine samples. The developed method presented an alternative strategy for the accurate and convenient determination of benzodiazepines in urine samples.