Effect of blood upon the selective ablation of atherosclerotic plaque with a pulsed dye laser

A reconstituted in vitro clot model for evaluating laser thrombolysis

BACKGROUND/OBJECTIVE

Laser thrombolysis is the selective removal of thrombus from occluded blood vessels using laser energy. A reconstituted clot model with reproducible optical absorption properties was developed to evaluate the effect of various laser parameters on thrombus removal rate.

STUDY DESIGN/MATERIALS AND METHODS

Reconstituted clots were made with known fibrinogen concentrations and hematocrits. Ex vivo clots were collected from ten swine. Four red gelatin phantoms were prepared. Mass removal rates and ablation efficiencies were determined using a 577 nm, 1 microsec pulsed dye laser. The ablation efficiencies of the three clot models were compared at an energy of 25 mJ and a repetition rate of 4 Hz. In addition, the reconstituted clot model was ablated as pulse energy and repetition rate were varied with average power held constant at 100 mW.

RESULTS

The mean ablation efficiency for ex vivo clots ranged from 0.4 +/- 0.1 to 3.4 +/- 0.7 microg/mJ/pulse, with significant differences between groups (ANOVA p < 0.05). Reconstituted clots of varied fibrinogen content had ablation efficiencies of 1.5 +/- 0.2 to 1.6 +/- 0.3 microg/mJ/pulse at this energy and repetition rate. Gelatin ablation efficiency was inversely proportional to protein content and ranged from 0.5 +/- 0.3 to 2.0 +/- 0.7 microg/mJ/pulse. Reconstituted clot mass removal rates (in microg/s) were clinically similar for settings ranging from 13 mJ at 8 Hz to 33 mJ at 3 Hz.

CONCLUSIONS

The reconstituted model clot is a reproducible and biologically relevant thrombolysis target. Ex vivo clot lacks reproducibility between individuals and gelatin phantoms lack clinical relevance. At a constant average power, varying laser parameters did not affect mass removal rates to a clinically significant degree.

Intravascular ultrasound can be used to evaluate pulsed laser ablation of arterial tissue

BACKGROUND AND OBJECTIVE

Intravascular ultrasound (IVUS) has been used successfully to detect intravascular lesions. This study evaluates the ability of IVUS to detect acoustic damage to the arterial wall following high power, pulsed laser ablation.

STUDY DESIGN/MATERIALS AND METHODS

Arterial ablation and disruption were performed in necropsy bovine aorta with a Ho:YAG laser using energy ranging from 140-720 mJ/pulse at 5 Hz. Laser energy was delivered with 2 mm diameter, multifiber over-the-wire catheters. A 20-MHz IVUS catheter was used to image the arterial damage prior to tissue fixation and morphometry.

RESULTS

IVUS images revealed ablation craters surrounded by high acoustically backscattering zones. By histology, the arteries revealed ablation craters lined with thermal coagulation surrounded by a region of dissection and vacuolization. The depth and width of the highly backscattering zones on IVUS images correlated strongly with the corresponding morphometric measurements of tissue dissection (r = 0.92, P = 0.0001 and r = 0.80, P = 0.0001, respectively). Morphometric measurements of the ablation crater depth correlated strongly with laser energy (r = 0.90, P = 0.0001), whereas crater width was not correlated with laser energy (r = 0.27, P = 0.09).

CONCLUSION

This study demonstrates that IVUS can detect and measure the extent of arterial damage following pulsed laser ablation. This may provide a means of detecting the extent of tissue disruption and help develop approaches to reduce or prevent extensive tissue damage.

Intraluminal vapor bubble induced by excimer laser pulse causes microsecond arterial dilation and invagination leading to extensive wall damage in the rabbit

BACKGROUND

Previous in vitro studies demonstrated that during excimer laser ablation of aortic tissue in saline, a fast-expanding and imploding vapor bubble is formed. The present in vivo study was designed to demonstrate the formation of a fast-expanding intraluminal bubble in flowing blood and to assess any damage to the adjacent arterial wall.

METHODS AND RESULTS

Excimer laser pulses (one to 10, at 55 mJ/mm2 per pulse) were delivered coaxially in the femoral and iliac arteries of nine normal rabbits. Time-resolved flash photography of dissected arteries in situ demonstrated a 50% diameter increase within 75 microseconds after the laser pulse and a subsequent invagination (150-500 microseconds) that corresponded with the temporal course of the bubble expansion (up to 3.2 mm in diameter) and implosion observed in a hemoglobin solution. One day after laser light delivery, light microscopy (47 arterial segments) showed abrasion of the internal elastic lamina, medial necrosis, and extensive dissection planes filled with red blood cells. The degree (up to 100% medial necrosis) and extent of damage (up to 1.9 mm in length) increased with the number of delivered laser pulses.

CONCLUSIONS

In blood, each excimer laser pulse generated a fast-expanding and imploding vapor bubble. In vivo, the intraluminal vapor bubble produced microsecond dilation and invagination of the adjacent arterial segment, which induced dissections and extensive wall damage far beyond the penetration depth of 308-nm laser light (< 100 microns). This unique pattern of extensive wall damage observed in the rabbit might explain the mechanism of dissection observed in humans and might have an impact on the acute and chronic outcome after excimer laser coronary angioplasty.