Functionalization of Polycarbonate Surfaces by Grafting PEG and Zwitterionic Polymers with a Multicomb Structure

Surface functionalization of polyurethanes: A critical review

Synthetic polymers, particularly polyurethanes (PUs), have revolutionized bioengineering and biomedical devices due to their customizable mechanical properties and long-term stability. However, the inherent hydrophobic nature of PU surfaces arises common issues such as high friction, strong protein adsorption, and thrombosis, especially in the physiological environment of blood contact. To overcome these issues, researchers have explored various modification techniques to improve the surface biofunctionality of PUs. In this review, we have systematically summarized several typical surface modification methods including surface plasma modification, surface oxidation-induced grafting polymerization, isocyanate-based chemistry coupling, UV-induced surface grafting polymerization, adhesives-assisted attachment strategy, small molecules-bridge grafting, solvent evaporation technique, and hydrogen bonding interaction. Correspondingly, the advantages, limitations, and future prospects of these surface modification methods were discussed. This review provides an important guidance or tool for developing surface functionalized PUs in the fields of bioengineering and medical devices.

Antifouling and Water Flux Enhancement in Polyethersulfone Ultrafiltration Membranes by Incorporating Water-Soluble Cationic Polymer of Poly [2-(Dimethyl amino) ethyl Methacrylate]

Novel ultrafiltration (UF) polymer membranes were prepared to enhance the antifouling features and filtration performance. Several ultrafiltration polymer membranes were prepared by incorporating different concentrations of water-soluble cationic poly [2-(dimethyl amino) ethyl methacrylate] (PDMAEMA) into a homogenous casting solution of polyethersulfone (PES). After adding PDMAEMA, the effects on morphology, hydrophilicity, thermal stability, mechanical strength, antifouling characteristics, and filtration performance of these altered blended membranes were investigated. It was observed that increasing the quantity of PDMAEMA in PES membranes in turn enhanced surface energy, hydrophilicity, and porosity of the membranes. These new modified PES membranes, after the addition of PDMAEMA, showed better filtration performance by having increased water flux and a higher flux recovery ratio (FRR%) when compared with neat PES membranes. For the PES/PDMAEMA membrane, pure water flux with 3.0 wt.% PDMAEMA and 0.2 MPa pressure was observed as (330.39 L·m^-2·h^-1), which is much higher than that of the neat PES membrane with the value of (163.158 L·m^-2·h^-1) under the same conditions. Furthermore, the inclusion of PDMAEMA enhanced the antifouling capabilities of PES membranes. The total fouling ratio (TFR) of the fabricated PES/PDMAEMA membranes with 3.0 wt.% PDMAEMA at 0.2 MPa applied pressure was 36 percent, compared to 64.9 percent for PES membranes.

Photoinduced micropatterning on biodegradable aliphatic polyester surfaces for anchoring dual brushes and its application in bacteria and cell patterning

In view of intrinsic challenges encountered in surface patterning on actual biomaterials such as the ones based on biodegradable polymers, we have demonstrated an innovative strategy to create micro-patterns on the surface of tartaric acid based aliphatic polyester P (poly(hexamethylene 2,3-O-isoprpylidentartarate)) without significant loss of its molecular weight. Around 10 wt% PAG (photoacid generator, 2-(4-methoxystyryl)-4,6-bis(trichloromethyl)-1,3,5-triazine) was purposefully encapsulated in a polyester matrix comprising of P and PLA (polylactide) at a ratio of 5 : 95. With the help of a photomask, selective areas of the matrix were exposed to UV radiation at 395 nm for 25 min to trigger the acid release from PAG entrapped unmasked areas for generating hydroxyl functionality that was later converted to an ATRP (atom transfer radical polymerization) initiating moiety on the irradiated domain of P. In subsequent steps, spatio-selective surface modification by surface initiated ATRP was carried out to generate an alternate pattern of polyPEGMA (poly(ethylene glycol)methyl ether methacrylate) and polyDMAPS (poly(3-dimethyl-(methacryloyloxyethyl)ammonium propane sulfonate)) brushes on the matrix. The patterned surface modified with dual brushes was found to be antifouling in nature (rejection of >97% of proteins). Strikingly, an alternate pattern of live bacterial cells (E. coli and S. aureus) was evident and a relatively high population of bacteria was found on the polyPEGMA brush modified domain. However, a complete reverse pattern was visible in the case of L929 mouse fibroblast cells, i.e., cells were found to predominantly adhere to and proliferate on the zwitterionic brush modified surface. An attempt was made to discuss a plausible mechanism of selective cell adhesion on the zwitterionic brush domain. This novel strategy employed on the biodegradable polymer surface provides an easy and straightforward way to micro-pattern various cells, bacteria, etc. on biodegradable substrates which hold great potential to function as biochips, diagnostics, bacteria/cell microarrays, etc.

Proactive Hemocompatibility Platform Initiated by PAMAM Dendrimer Adapting to Key Components in Coagulation System

Surface modification manipulates the application performance of materials, and thrombosis caused by material contact is a key risk factor of biomaterials failure in blood-contacting/implanting devices. Therefore, building a safe and effective hemocompatibility platform is still urgent. Owing to the unique properties of polyamidoamine (PAMAM) dendrimers, in this study, modified surfaces with varying dendrimer densities were interacted with elements maintaining blood homeostasis. These included the plasma proteins bovine serum albumin and fibrinogen, cells in blood (platelets and erythrocyte), as well as endothelial cells (ECs), and the objective was to evaluate the blood compatibility of the chosen materials. Whole blood test and dynamic blood circulation experiment by the arteriovenous shunt mode of rabbit were also conducted, based on the complexity and fluidity of blood. The PAMAM-modified substrates, particularly that with a high density of PAMAM (N1.0), adsorbed proteins with lessened fibrinogen adsorption, reduced platelet activation and aggregation, and suppressed clotting in whole blood and dynamic blood testing. Furthermore, the designed PAMAM dendrimer densities were safe and showed negligible erythrocyte lysis. Concurrently, PAMAM modification could maintain EC growth and did not trigger the release of procoagulant factors. These results suggest that the PAMAM-modified materials are compatible for maintaining blood homeostasis. Thus, PAMAM dendrimers can work as excellent surface modifiers for constructing a hemocompatibility platform and even a primer layer for desired functional design, promoting the service performance of blood-contacting devices.

Surface Engineering of Cardiovascular Devices for Improved Hemocompatibility and Rapid Endothelialization

Cardiovascular devices have been widely applied in the clinical treatment of cardiovascular diseases. However, poor hemocompatibility and slow endothelialization on their surface still exist. Numerous surface engineering strategies have mainly sought to modify the device surface through physical, chemical, and biological approaches to improve surface hemocompatibility and endothelialization. The alteration of physical characteristics and pattern topographies brings some hopeful outcomes and plays a notable role in this respect. The chemical and biological approaches can provide potential signs of success in the endothelialization of vascular device surfaces. They usually involve therapeutic drugs, specific peptides, adhesive proteins, antibodies, growth factors and nitric oxide (NO) donors. The gene engineering can enhance the proliferation, growth, and migration of vascular cells, thus boosting the endothelialization. In this review, the surface engineering strategies are highlighted and summarized to improve hemocompatibility and rapid endothelialization on the cardiovascular devices. The potential outlook is also briefly discussed to help guide endothelialization strategies and inspire further innovations. It is hoped that this review can assist with the surface engineering of cardiovascular devices and promote future advancements in this emerging research field.

Molecular Design of Zwitterionic Polymer Interfaces: Searching for the Difference

The widespread occurrence of zwitterionic compounds in nature has incited their frequent use in designing biomimetic materials. Therefore, zwitterionic polymers are a thriving field. A particular interest for this particular polymer class has currently focused on their use in establishing neutral, low-fouling surfaces. After highlighting strategies to prepare model zwitterionic surfaces as well as those that are more suitable for practical purposes relying strongly on radical polymerization methods, we present recent efforts to diversify the structure of the hitherto quite limited variety of zwitterionic monomers and of the derived polymers. We identify key structural variables, consider their influence on essential properties such as overall hydrophilicity and long-term stability, and discuss promising targets for the synthesis of new variants.

Bioreducible, hydrolytically degradable and targeting polymers for gene delivery

Recently, synthetic gene carriers have been intensively developed owing to their promising application in gene therapy and considered as a suitable alternative to viral vectors because of several benefits. But cationic polymers still face some problems like low transfection efficiency, cytotoxicity, and poor cell recognition and internalization. The emerging engineered and smart polymers can respond to some changes in the biological environment like pH change, ionic strength change and redox potential, which is beneficial for cellular uptake. Redox-sensitive disulfide based and hydrolytically degradable cationic polymers serve as gene carriers with excellent transfection efficiency and good biocompatibility owing to degradation in the cytoplasm. Additionally, biodegradable polymeric micelles with cell-targeting function are recently emerging gene carriers, especially for the transfection of endothelial cells. In this review, some strategies for gene carriers based on these bioreducible and hydrolytically degradable polymers will be illustrated.

Surface-Initiated Controlled Radical Polymerization: State-of-the-Art, Opportunities, and Challenges in Surface and Interface Engineering with Polymer Brushes

The generation of polymer brushes by surface-initiated controlled radical polymerization (SI-CRP) techniques has become a powerful approach to tailor the chemical and physical properties of interfaces and has given rise to great advances in surface and interface engineering. Polymer brushes are defined as thin polymer films in which the individual polymer chains are tethered by one chain end to a solid interface. Significant advances have been made over the past years in the field of polymer brushes. This includes novel developments in SI-CRP, as well as the emergence of novel applications such as catalysis, electronics, nanomaterial synthesis and biosensing. Additionally, polymer brushes prepared via SI-CRP have been utilized to modify the surface of novel substrates such as natural fibers, polymer nanofibers, mesoporous materials, graphene, viruses and protein nanoparticles. The last years have also seen exciting advances in the chemical and physical characterization of polymer brushes, as well as an ever increasing set of computational and simulation tools that allow understanding and predictions of these surface-grafted polymer architectures. The aim of this contribution is to provide a comprehensive review that critically assesses recent advances in the field and highlights the opportunities and challenges for future work.

Multi-targeting peptides for gene carriers with high transfection efficiency

Non-viral gene carriers for gene therapy have been developed for many years.

Co-self-assembly of cationic microparticles to deliver pEGFP-ZNF580 for promoting the transfection and migration of endothelial cells

The gene transfection efficiency of polyethylenimine (PEI) varies with its molecular weight. Usually, high molecular weight of PEI means high gene transfection, as well as high cytotoxicity in gene delivery in vivo. In order to enhance the transfection efficiency and reduce the cytotoxicity of PEI-based gene carriers, a novel cationic gene carrier was developed by co-self-assembly of cationic copolymers. First, a star-shaped copolymer poly(3(S)-methyl-morpholine-2,5-dione-co-lactide) (P(MMD-co-LA)) was synthesized using D-sorbitol as an initiator, and the cationic copolymer (P(MMD-co-LA)-g-PEI) was obtained after grafting low-molecular weight PEI. Then, by co-self-assembly of this cationic copolymer and a diblock copolymer methoxy-poly(ethylene glycol) (mPEG)-b-P(MMD-co-LA), microparticles (MPs) were formed. The core of MPs consisted of a biodegradable block of P(MMD-co-LA), and the shell was formed by mPEG and PEI blocks. Finally, after condensation of pEGFP-ZNF580 by these MPs, the plasmids were protected from enzymatic hydrolysis effectively. The result indicated that pEGFP-ZNF580-loaded MP complexes were suitable for cellular uptake and gene transfection. When the mass ratio of mPEG-b-P(MMD-co-LA) to P(MMD-co-LA)-g-PEI reached 3/1, the cytotoxicity of the complexes was very low at low concentration (20 μg mL-1). Additionally, pEGFP-ZNF580 could be transported into endothelial cells (ECs) effectively via the complexes of MPs/pEGFP-ZNF580. Wound-healing assay showed that the transfected ECs recovered in 24 h. Cationic MPs designed in the present study could be used as an applicable gene carrier for the endothelialization of artificial blood vessels.

Degradable polyurethane with poly(2-ethyl-2-oxazoline) brushes for protein resistance

The effects of chain length and graft density of poly(2-ethyl-2-oxazoline) on the protein resistance of degradable polyurethane-graft-poly(2-ethyl-2-oxazoline) with PCL as the soft segment have been investigated.

REDV–polyethyleneimine complexes for selectively enhancing gene delivery in endothelial cells

Gene therapy provides a new strategy for promoting endothelialization, and rapid endothelialization has attracted increasing attention for inhibiting thrombosis and restenosis in artificial vascular implants.

REDV Peptide Conjugated Nanoparticles/pZNF580 Complexes for Actively Targeting Human Vascular Endothelial Cells

Herein, we demonstrate that the REDV peptide modified nanoparticles (NPs) can serve as a kind of active targeting gene carrier to condensate pZNF580 for specific promotion of the proliferation of endothelial cells (ECs). First, we synthesized a series of biodegradable amphiphilic copolymers by ring-opening polymerization reaction and graft modification with REDV peptide. Second, we prepared active targeting NPs via self-assembly of the amphiphilic copolymers using nanoprecipitation technology. After condensation with negatively charged pZNF580, the REDV peptide modified NPs/pZNF580 complexes were formed finally. Due to the binding affinity toward ECs of the specific peptide, these REDV peptide modified NPs/pZNF580 complexes could be recognized and adhered specifically by ECs in the coculture system of ECs and human artery smooth muscle cells (SMCs) in vitro. After expression of ZNF580, as the key protein to promote the proliferation of ECs, the relative ZNF580 protein level increased from 15.7% to 34.8%. The specificity in actively targeting ECs of the REDV peptide conjugated NPs/pZNF580 complexes was still retained in the coculture system. These findings in the present study could facilitate the development of actively targeting gene carriers for the endothelialization of artificial blood vessels.

CREDVW-Linked Polymeric Micelles As a Targeting Gene Transfer Vector for Selective Transfection and Proliferation of Endothelial Cells

Nowadays, gene transfer technology has been widely used to promote endothelialization of artificial vascular grafts. However, the lack of gene vectors with low cytotoxicity and targeting function still remains a pressing challenge. Herein, polyethylenimine (PEI, 1.8 kDa or 10 kDa) was conjugated to an amphiphilic and biodegradable diblock copolymer poly(ethylene glycol)-b-poly(lactide-co-glycolide) (mPEG-b-PLGA) to prepare mPEG-b-PLGA-g-PEI copolymers with the aim to develop gene vectors with low cytotoxicity while high transfection efficiency. The micelles were prepared from mPEG-b-PLGA-g-PEI copolymers by self-assembly method. Furthermore, Cys-Arg-Glu-Asp-Val-Trp (CREDVW) peptide was linked to micelle surface to enable the micelles with special recognition for endothelial cells (ECs). In addition, pEGFP-ZNF580 plasmids were condensed into these CREDVW-linked micelles to enhance the proliferation of ECs. These CREDVW-linked micelle/pEGFP-ZNF580 complexes exhibited low cytotoxicity by MTT assay. The cell transfection results demonstrated that pEGFP-ZNF580 could be transferred into ECs efficiently by these micelles. The results of Western blot analysis showed that the relative ZNF580 protein level in transfected ECs increased to 76.9%. The rapid migration of transfected ECs can be verified by wound healing assay. These results indicated that CREDVW-linked micelles could be a suitable gene transfer vector with low cytotoxicity and high transfection efficiency, which has great potential for rapid endothelialization of artificial blood vessels.

Targeting REDV peptide functionalized polycationic gene carrier for enhancing the transfection and migration capability of human endothelial cells

Targeting gene engineering should be considered as an effective method for promoting endothelialization of vascular grafts. Herein, we developed a targeting REDV peptide functionalized polycationic gene carrier for carrying the pEGFP-ZNF580 plasmid with the aim of enhancing the transfection and migration capability of human endothelial cells. This polycationic gene carrier with the REDV peptide (mPEG-P(LA-co-CL)-PEI-REDV) was prepared by the conjugation of the Cys-Arg-Glu-Asp-Val-Trp (CREDVW) peptide with the amphiphilic block copolymer methoxy poly(ethylene glycol) ether-poly(l-lactide-co-ε-caprolactone)-poly(ethyleneimine) (mPEG-P(LA-co-CL)-PEI). mPEG-P(LA-co-CL)-PEI nanoparticles (NP) and mPEG-P(LA-co-CL)-PEI-REDV nanoparticles (REDV-NP) were formed by the self-assembly of the corresponding polycationic polymers, and then their pEGFP-ZNF580 complexes were prepared via the electrostatic interaction with pEGFP-ZNF580 plasmids, respectively. Gel electrophoresis results show that the targeted REDV-NPs could compress pEGFP-ZNF580 plasmids into stable complexes and protect the plasmids against desoxyribonuclease degradation. MTT assay indicates that these targeted REDV-NP/pEGFP-ZNF580 complexes exhibit better cyto-compatibility than the non-targeted NP/pEGFP-ZNF580 complexes and the control PEI 1800 Da/pEGFP-ZNF580 complexes. In vitro transfection experiments and western blot analysis of EA.hy926 endothelial cells show that the pEGFP-ZNF580 plasmid expression and the relative protein level transfected by targeted REDV-NP/pEGFP-ZNF580 complexes are roughly consistent with that transfected by PEI 25 kDa/pEGFP-ZNF580 complexes. More importantly, the scratch wound assay results demonstrate that the migration capability of EA.hy926 cells has been improved significantly by the expression of the pEGFP-ZNF580 plasmid. Our results indicate that the polycationic polymer with functional REDV peptides can be a potential candidate as a pEGFP-ZNF580 plasmid delivery carrier and may be used in the endothelialization of vascular grafts.

Antimicrobial surfaces grafted random copolymers with REDV peptide beneficial for endothelialization

Multifunctional surfaces have been created by surface modification and click reactions. These surfaces possess excellent hemocompatibility and endothelialization, as well as effective antimicrobial activity.

Surface modification and endothelialization of biomaterials as potential scaffolds for vascular tissue engineering applications

This review highlights the recent developments of surface modification and endothelialization of biomaterials in vascular tissue engineering applications.