Antifouling and Water Flux Enhancement in Polyethersulfone Ultrafiltration Membranes by Incorporating Water-Soluble Cationic Polymer of Poly [2-(Dimethyl amino) ethyl Methacrylate]

Novel ultrafiltration (UF) polymer membranes were prepared to enhance the antifouling features and filtration performance. Several ultrafiltration polymer membranes were prepared by incorporating different concentrations of water-soluble cationic poly [2-(dimethyl amino) ethyl methacrylate] (PDMAEMA) into a homogenous casting solution of polyethersulfone (PES). After adding PDMAEMA, the effects on morphology, hydrophilicity, thermal stability, mechanical strength, antifouling characteristics, and filtration performance of these altered blended membranes were investigated. It was observed that increasing the quantity of PDMAEMA in PES membranes in turn enhanced surface energy, hydrophilicity, and porosity of the membranes. These new modified PES membranes, after the addition of PDMAEMA, showed better filtration performance by having increased water flux and a higher flux recovery ratio (FRR%) when compared with neat PES membranes. For the PES/PDMAEMA membrane, pure water flux with 3.0 wt.% PDMAEMA and 0.2 MPa pressure was observed as (330.39 L·m^-2·h^-1), which is much higher than that of the neat PES membrane with the value of (163.158 L·m^-2·h^-1) under the same conditions. Furthermore, the inclusion of PDMAEMA enhanced the antifouling capabilities of PES membranes. The total fouling ratio (TFR) of the fabricated PES/PDMAEMA membranes with 3.0 wt.% PDMAEMA at 0.2 MPa applied pressure was 36 percent, compared to 64.9 percent for PES membranes.

Predicting Water Flux in Forward Osmosis with Unknown Feed Solution Composition: An Empirical Approach Based on Thermodynamical Properties

This study investigated the predictability of forward osmosis (FO) performance with an unknown feed solution composition, which is important in industrial applications where process solutions are concentrated but their composition is unknown. A fit function of the unknown solution's osmotic pressure was created, correlating it with the recovery rate, limited by solubility. The osmotic concentration was derived and used in the subsequent simulation of the permeate flux in the considered FO membrane. For comparison, magnesium chloride and magnesium sulfate solutions were used since these show a particularly strong deviation from the ideal osmotic pressure according to Van't Hoff and are, thus, characterized by an osmotic coefficient unequal to 1. The simulation is based on the solution-diffusion model with consideration of external and internal concentration polarization phenomena. Here, a membrane module was subdivided into 25 segments of equal membrane area, and the module performance was solved by a numerical differential. Experiments in a laboratory scale for validation confirmed that the simulation gave satisfactory results. The recovery rate in the experimental run could be described for both solutions with a relative error of less than 5%, while the calculated water flux as a mathematical derivative of the recovery rate showed a bigger deviation.

Comparative Study of Different Ion-Exchange Membrane Types in Diffusion Dialysis for the Separation of Sulfuric Acid and Nickel Sulfate

The possibility of using various types of ion-exchange membranes in diffusion dialysis for the separation of sulfuric acid and nickel sulfate has been evaluated. The process of the dialysis separation of a real waste solution from an electroplating facility containing 252.3 g/L of sulfuric acid, 20.9 g/L of nickel ions and small amounts of zinc, iron, copper ions, etc. has been studied. Heterogeneous cation-exchange membrane containing sulfonic groups and heterogeneous anion-exchange membranes with different thicknesses (from 145 μm to 550 μm) and types of fixed groups (four samples with quaternary ammonium base and one sample with secondary and tertiary amines) have been used. The diffusion fluxes of sulfuric acid, nickel sulfate, and the total and osmotic fluxes of the solvent have been determined. The use of a cation-exchange membrane does not allow the separation of the components, since the fluxes of both components are low and comparable in magnitude. The use of anion-exchange membranes makes it possible to efficiently separate sulfuric acid and nickel sulfate. Anion-exchange membranes with quaternary ammonium groups are more effective in the diffusion dialysis process, while the thin membrane turns out to be the most effective.

Carboxylated Graphene Oxide (c-GO) Embedded ThermoPlastic Polyurethane (TPU) Mixed Matrix Membrane with Improved Physicochemical Characteristics

Water is an important component of our life. However, the unavailability of fresh water and its contamination are emerging problems. The textile industries are the major suppliers of contamination of water, producing high concentrations of heavy metals and hazardous dyes posing serious health hazards. Several technologies for water purification are available in the market. Among them, the membrane technology is a highly advantageous and facile strategy to remediate wastewater. Herein, the distinguished combination of pore-forming agents, solvent, and nanoparticles has been used to achieve improved functioning of the polymeric composite membranes. To do so, graphene oxide (GO) was fabricated via Hummer's technique and GO functionalization using chloroacetic acid (c-GO) was performed. Thermoplastic polyurathane (TPU) membranes having different concentrations c-GO were made using the phase inversion technique. Scanning electron microscopy (SEM), Fourier transforms infrared spectroscopy (FT-IR), and X-ray diffraction (XRD) was used to examine surface morphology, chemical functionalities on membranes surfaces, and crystallinity of membranes, respectively. The temperature-dependent behavior of c-GO composite membranes has been analyzed using DSC technique. The water contact angle measurements were performed for the estimation of hydrophilicity of the c-GO based TPU membrane. The improved water permeability of the composite membrane was observed with increasing the c-GO concentration in polymeric membranes. c-GO was observed as a potential candidate that enhanced membrane physicochemical properties. The proposed membranes can behave as efficient candidates in multiple domains of environmental remediation. Furthermore, the improved dye rejection characteristics of proposed composite membranes suggest that the membranes can be best suited for wastewater treatment as well.

Study on the Changes in the Microcosmic Environment in Forward Osmosis Membranes to Reduce Membrane Resistance

Osmotic microbial fuel cells (OsMFCs) are an emerging wastewater treatment technology in bioelectricity generation, organic substrate removal, and wastewater reclamation. To address this issue, proton-conductive sites were strengthened after using the forward osmosis (FO) membrane by reducing the membrane resistance. The mechanism of improving electricity generation was attributed mainly to the unique characteristics of the membrane material and the water flux characteristics of the FO membrane. In particular, only when the concentration of catholyte was greater than 0.3 M was the membrane resistance the main contributor to the overall internal resistance. Meanwhile, through the simulation of the concentration inside the membrane, the changes in the membrane thickness direction and the phase transition of the internal structure of the membrane from the dry state (0% water content) to the expansion state (>50%water content) were analyzed, which were influenced by the water flux, further explaining the important role of the membrane’s microenvironment in reducing the membrane impedance. This further opens a novel avenue for the use of OsMFCs in practical engineering applications.

Long-Chain Modification of the Tips and Inner Walls of MWCNTs and Their Nanocomposite Reverse Osmosis Membranes

Multi-walled carbon nanotubes (MWCNTs) were modified on the tips and inner walls by 12-chloro-12-oxododecanedioic acid-methyl ester groups and then added to the polyamide composite membranes to prepare MWCNT-CH₂OCOC₁₂H₂₃O₂ membranes for desalination. The characterization results of transmission electron microscopy, Fourier transform, infrared transform, and thermogravimetric analysis showed that the 12-chloro-12-oxododecanedioic acid-methyl ester group was successfully grafted to the entrances and inner walls of the MWCNTs. The performance of the MWCNTs' composite membranes was evaluated by scanning electron microscopy, contact angle, and filtration test. The modified membrane morphology is more uniform, and there is no structural damage. The grafting of carbon nanotubes with methyl 12-chloro-12-oxydodecyldicarboxylate could improve the hydrophilicity of the membrane. Under identical conditions, the water flux of MWCNT-CH₂OCOC₁₂H₂₃O₂ membranes was higher than that of the pristine carbon nanotube's membrane, and the desalination rate was also slightly improved.

Re-assessment of the climatic controls on the carbon and water fluxes of a boreal aspen forest over 1996-2016: Changing sensitivity to long-term climatic conditions

Recent evidence suggests that the relationships between climate and boreal tree growth are generally non-stationary; however, it remains uncertain whether the relationships between climate and carbon (C) fluxes of boreal forests are stationary or have changed over recent decades. In this study, we used continuous eddy-covariance and microclimate data over 21 years (1996-2016) from a 100-year-old trembling aspen stand in central Saskatchewan, Canada to assess the relationships between climate and ecosystem C and water fluxes. Over the study period, the most striking climatic event was a severe, 3-year drought (2001-2003). Gross ecosystem production (GEP) showed larger interannual variability than ecosystem respiration (R_e ) over 1996-2016, but R_e was the dominant component contributing to the interannual variation in net ecosystem production (NEP) during post-drought years. The interannual variations in evapotranspiration (ET) and C fluxes were primarily driven by temperature and secondarily by water availability. Two-factor linear models combining precipitation and temperature performed well in explaining the interannual variation in C and water fluxes (R²  > .5). The temperature sensitivities of all three C fluxes (NEP, GEP and R_e ) declined over the study period (p < .05), and, as a result, the phenological controls on annual NEP weakened. The decreasing temperature sensitivity of the C fluxes may reflect changes in forest structure, related to the over-maturity of the aspen stand at 100 years of age, and exacerbated by high tree mortality following the severe 2001-2003 drought. These results may provide an early warning signal of driver shift or even an abrupt status shift of aspen forest dynamics. They may also imply a universal weakening in the relationship between temperature and GEP as forests become over-mature, associated with the structural and compositional changes that accompany forest ageing.

Machine Learning Assisted Screening of Two-Dimensional Materials for Water Desalination

There exists a vast expanse of data in the literature which can be harnessed for accelerated design and discovery of advanced materials for various applications of importance ─ for example, desalination of seawater. Here, we develop a machine learning (ML) model, training it with ∼260 molecular dynamics (MD) computation results, to predict the desalination performance of 2D membranes that exist in the literature. The desalination performance variables of water flux and salt rejection rates are correlated to 49 material features related to the chemistry of the pores and the membranes along with applied pressure, salt concentration, partial charges on the atoms, geometry of the pore, the mechanical properties of the membranes, and the properties of water for the water model used. We used the ML model to screen 3814 structurally optimized 2D materials for maximum water flux and salt rejection rates from the literature. We found some candidates that perform ∼4 times better than the more popularly known 2D materials such as graphene and MoS₂. This result is verified using data obtained from MD simulations performed on several representative 2D membranes for different classes. Such validated statistical frameworks using literature data can be very useful in guiding experiments in the field of functional materials for varied applications.

2D Material Nanofiltration Membranes: From Fundamental Understandings to Rational Design

Since the discovery of 2D materials, 2D material nanofiltration (NF) membranes have attracted great attention and are being developed with a tremendously fast pace, due to their energy efficiency and cost effectiveness for water purification. The most attractive aspect for 2D material NF membranes is that, anomalous water and ion permeation phenomena have been constantly observed because of the presence of the severely confined nanocapillaries (<2 nm) in the membrane, leading to its great potential in achieving superior overall performance, e.g., high water flux, high rejection rates of ions, and high resistance to swelling. Hence, fundamental understandings of such water and ion transport behaviors are of great significance for the continuous development of 2D material NF membranes. In this work, the microscopic understandings developed up to date on 2D material NF membranes regarding the abnormal transport phenomena are reviewed, including ultrafast water and ion permeation rates with the magnitude several orders higher than that predicted by conventional diffusion behavior, ion dehydration, ionic Coulomb blockade, ion-ion correlations, etc. The state-of-the-art structural designs for 2D material NF membranes are also reviewed. Discussion and future perspectives are provided highlighting the rational design of 2D material membrane structures in the future.

Enhancing the water flux and biological treatment in bilateral influent submerged FOMBR via applying the strategy of intermittent discharging salt

The forward osmotic membrane bioreactor (FOMBR) is an emerging innovative technology with broad application prospects in the field of wastewater treatment. Its application is severely limited by concentration polarization, salinity accumulation, and evident water flux decline. Gradual salinity accumulation to a maximum conductivity of 19.7 mS cm^-1 under continuous flow operation suppressed the activities of sludge and biodegradation efficiencies. The employment of the regulation of intermittent supernatant discharge was first investigated to alleviate inhibition caused via accumulated salinity in the bioreactor, and bilateral influent was examined with respect to the performance of the FOMBR. The preferable condition to be applied was FO orientation mode (i.e. active layer facing feed) with spacers added to the surface. Given the decreased salt concentration with 2 L of the supernatant removed per day, the water flux declined more slowly and sludge activities were recovered. When compared to the performance without discharging supernatant, the strategy of controlling salinity could improve the removal efficiencies of NH₄⁺-N, PO₄^3--P, and total organic carbon (TOC) by 15.1, 14.3, and 2.3%, respectively. Additionally, the sludge in the intermittent supernatant discharge bioreactor exhibited better sludge property, larger sludge particle size, and recovered sludge activities with the mixed liquid suspended solids (MLSS) stable at around 4.90 g L^-1. Therefore, regulation of intermittent salt discharge and controlling the salinity concentration in bioreactor can be employed as an effective method to deal with concentration polarization and salinity accumulation in the FOMBR.

Fabrication and Characterization of Ice Templated Membrane Supports from Portland Cement

Porous ceramic membranes for aqueous microfiltration and ultrafiltration processes suffer from the high-costs of material and processing. The latter is mainly due to the high-temperature sintering step. In this work, cement-based membrane supports from ultrafine Portland cement are studied as a low-cost alternative to traditional oxidic ceramic supports. An environmentally friendly freeze-casting fabrication route is applied for the fabrication of porous membrane supports. Cement membrane supports are becoming mechanically stabile after hydration reaction of cement with water, which does not require any high-temperature sintering step as in a conventional ceramic membrane fabrication process. This fabrication route, which is sintering-free, decreases the cost and environmental impact of the membrane fabrication process by eliminating extra energy consumption step during sintering. The Archimedes method, scanning electron microscopy (SEM), micro-computed tomographic (µCT), and mercury porosimetry characterize the membrane supports in respect to open porosity, pore size distribution, morphology, and connectivity. The flexural strength of the 3 mm thick membranes is in the range from 1 to 6 MPa, as obtained by the ring-on-ring tests. The obtained membrane supports possess porosity in the range between 48 and 73% depending on fabrication conditions (cooling rate and the solid content, as determined by Archimedes method enabling water flux in the range between 79 and 180 L/(h·m²) at 0.5 bar transmembrane pressure difference and 3 mm membrane thickness.

Synthesis, characterization of cellulose acetate membrane and application for the treatment of oily wastewater

This study reports the synthesis of cellulose acetate (CA) membranes of different weight percentages of the polymer ranging from 5 to 17.5 wt% with 2.5% increment and their behaviour towards oil removal from water. The membrane showed decreased water content and porosity and also increased hydraulic resistance upto 3.38 kPa/(l m^-2 h^-1) as the concentration of polymer increases. The Atomic Force Microscopic studies reveal that the membrane shows decreased arithmetic mean roughness from 36.291 to 5.935 nm as the concentration of the polymer increases from 5% to 17.5%. Field Emission Scanning Electron Microscopy shows the surface morphology of the CA membrane. X-ray diffraction studies indicate that in the membrane having above 15% polymer concentration, the polymer chains orient to regularity showing higher crystallinity. The thermal studies indicate their stability upto 280°C, and exothermic decompositions from 338°C to 380°C implying the compactness of chains as polymer concentration increases. From Total Organic Carbon studies, the oil rejection was found to be maximum (96.4%) for the highest concentration of polymer in the membrane.

Investigation of water and salt flux performances of polyamide coated tubular electrospun nanofiber membrane under pressure

In this study, a novel osmotic membrane was developed by polyamide (PA) coating on the tubular electrospun nanofiber (TuEN) support membrane. Water and reverse salt flux properties of the obtained membrane were investigated by applying pressure in addition to the osmotic forces. Surface characterization of the membrane was carried out by Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscope (SEM) analyses and flux performance tests were performed in both cross flow and submerged membrane setups. Applying pressure from the feed to the concentrate side had significant effects on the water and salt fluxes. Higher pressure differences between the feed and concentrate sides resulted in unexpected high water fluxes up to 500 Lm^-2h^-1 (LMH). Besides, the pressure helps to transfer the salt content of feed water into the concentrate side, differently from the osmotic process preventing the salinity build-up at the feed side. PA coated TuEN membrane operated under pressure will exhibit a favorable solution in water/wastewater treatment applications, especially for membrane bioreactors (MBR) in terms of preventing salt accumulation in the bioreactor, decreasing the membrane fouling, increasing the volume of product water, and enabling the concentrate management.

Belowground inter-ramet water transport capacity in Populus euphratica, a Central Asian desert phreatophyte

Populus euphratica Oliv. is a widespread phreatophytic tree species that forms riparian forests in (hyper-)arid regions of Central Asia. Its recruitment strongly relies on vegetative propagation from 'root suckers' that emerge from underground root spacers. The water transport through the spacers, although decisive for emerging ramets, has only rarely been quantified, but is crucial for the vegetative regeneration of the forests. In root spacers with different diameters collected from a mature poplar forest in northwest China, we calculated the hydraulic conductivity (k_c ) from anatomical investigations on the basis of a modified Hagen-Poiseuille equation and measured it (k_m ) with a perfusion solution in the laboratory. The k_m values were compared with the water use by young and mature P. euphratica trees determined in previous studies. We obtained a significant correlation between k_m and k_c (which, however, was higher by at least one order of magnitude). Due to the extensive occurrence of tyloses, particularly in older conduits and thicker spacers, and because the conduit area did not increase with spacer diameter, neither k_c nor k_m increased with an increase in spacer diameter. The water supply through the spacers would be sufficient to meet the water demand even of mature trees. Our results provide a mechanistic explanation for the observed occurrence of P. euphratica clones across large areas and, provided that they are also valid for stands with larger distances to the water table, for the sustained growth and vegetative reproduction of P. euphratica stands growing at larger distances from the groundwater.

On the energy efficiency of cell migration in diverse physical environments

Cell migration requires energy, but the metabolic cost of migration has not been quantitatively explored in detail. Here, we use a 2-phase model of the cell cytoplasm to compute cell velocities and energy efficiencies during cell movement. This model predicts that actin polymerization-driven migration is very inefficient in high-hydraulic-resistance environments. Instead, cells can adopt the water-driven mechanism. Therefore, the energetics and mechanical efficiencies of cell movement are predicted to depend on the physical environment.

In this work, we explore fundamental energy requirements during mammalian cell movement. Starting with the conservation of mass and momentum for the cell cytosol and the actin-network phase, we develop useful identities that compute dissipated energies during extensions of the cell boundary. We analyze 2 complementary mechanisms of cell movement: actin-driven and water-driven. The former mechanism occurs on 2-dimensional cell-culture substrate without appreciable external hydraulic resistance, while the latter mechanism is prominent in confined channels where external hydraulic resistance is high. By considering various forms of energy input and dissipation, we find that the water-driven cell-migration mechanism is inefficient and requires more energy. However, in environments with sufficiently high hydraulic resistance, the efficiency of actin-polymerization-driven cell migration decreases considerably, and the water-based mechanism becomes more efficient. Hence, the most efficient way for cells to move depends on the physical environment. This work can be extended to higher dimensions and has implication for understanding energetics of morphogenesis in early embryonic development and cancer-cell metastasis and provides a physical basis for understanding changing metabolic requirements for cell movement in different conditions.

Performance Comparison between Polyvinylidene Fluoride and Polytetrafluoroethylene Hollow Fiber Membranes for Direct Contact Membrane Distillation

Increasing water demand coupled with projected climate change puts the Southwestern United States at the highest risk of water sustainability by 2050. Membrane distillation offers a unique opportunity to utilize the substantial, but largely untapped geothermal brackish groundwater for desalination to lessen the stress. Two types of hydrophobic, microporous hollow fiber membranes (HFMs), including polytetrafluoroethylene (PTFE) and polyvinylidene fluoride (PVDF), were evaluated for their effectiveness in direct contact membrane distillation (DCMD). Water flux and salt rejection were measured as a function of module packing density and length in lab-scale systems. The PVDF HFMs generally exhibited higher water flux than the PTFE HFMs possibly due to thinner membrane wall and higher porosity. As the packing density or module length increased, water flux declined. The water production rate per module, however, increased due to the larger membrane surface area. A pilot-scale DCMD system was deployed to the 2nd largest geothermally-heated greenhouse in the United States for field testing over a duration of about 22 days. The results demonstrated the robustness of the DCMD system in the face of environmental fluctuation at the facility.

Metastable State of Water and Performance of Osmotically Driven Membrane Processes

Semipermeable membranes play critical roles in many natural and engineering systems. The osmotic pressure is found experimentally much less effective than the hydraulic pressure to drive water through the membrane, which is commonly attributed to the internal concentration polarization (ICP) in the porous layer of the membrane. In this study, it has been shown that a necessary condition for the osmotic pressure to be effective is water continuity across the entire membrane thickness under negative pressure, i.e., the water inside the membrane remains in a metastable state. However, the metastable state of water cannot be maintained indefinitely, and cavitation will undoubtedly occur in the osmotically driven processes. Collapse of the water metastable state was suggested for the first time to be a more important and fundamental reason for the low water fluxes in the osmotically driven membrane processes.

Zinc-Supported Multiwalled Carbon Nanotube Nanocomposite: A Synergism to Micronutrient Release and a Smart Distributor To Promote the Growth of Onion Seeds in Arid Conditions

In the current scenario, nanotechnological applications in the agriculture sector showing potential impacts on the improvement of plant growth in terms of protection and safety are at a very nascent stage. The present study deals with the synergistic role of zinc (Zn) and multiwalled carbon nanotubes (MWCNTs) synthesized as a zinc oxide (ZnO)/MWCNT nanocomposite, a prospective applicant to modulate the micronutrient supply and enhance the growth of onion seeds, thereby replacing harmful, unsafe chemical fertilizers. To the best of our knowledge, this is the first report wherein MWCNTs have been envisaged as a micronutrient distributor and a nutrient stabilizer enhancing the growth of onion plant under arid conditions. The growth trend of onion seeds was evaluated in an aqueous medium with varied concentrations of (i) MWCNTs, (ii) zinc oxide nanoparticles, and (iii) ZnO/MWCNT nanocomposites. ZnO/MWCNT nanocomposites with 15 μg/mL concentration displayed the best seedling growth with the maximum number of cells in telophase. A significant growth trend with increased concentration of ZnO/MWCNTs displayed no negative impact on plant growth in contrast to that with the use of MWCNTs. The synergistic impact of Zn nanoparticles and MWCNTs in ZnO/MWCNT nanocomposites on the rate of germination was explained via a mechanism supported by scanning transmission electron microscopy.

Molecular phenotype of SLC4A11 missense mutants: Setting the stage for personalized medicine in corneal dystrophies

SLC4A11 mutations cause cases of congenital hereditary endothelial dystrophy (CHED), Harboyan syndrome (HS), and Fuchs endothelial corneal dystrophy (FECD). Defective water reabsorption from corneal stroma by corneal endothelial cells (CECs) leads to these corneal dystrophies. SLC4A11, in the CEC basolateral membrane, facilitates transmembrane movement of H₂ O, NH₃ , and H⁺ -equivalents. Some SLC4A11 disease mutants have impaired folding, leading to a failure to move to the cell surface, which in some cases can be corrected by the drug, glafenine. To identify SLC4A11 mutants that are targets for folding-correction therapy, we examined 54 SLC4A11 missense mutants. Cell-surface trafficking was assessed on immunoblots, by the level of mature, high molecular weight, cell surface-associated form, and using a bioluminescence resonance energy transfer assay. Low level of cell surface trafficking was found in four out of 18 (20%) of FECD mutants, 19/ out of 31 (61%) of CHED mutants, and three out of five (60%) of HS mutants. Amongst ER-retained mutants, 16 showed increased plasma membrane trafficking when grown at 30°C, suggesting that their defect has potential for rescue. CHED-causing point mutations mostly resulted in folding defects, whereas the majority of FECD missense mutations did not affect trafficking, implying functional impairment. We identified mutations that make patients candidates for folding correction of their corneal dystrophy.

Tonoplast (BvTIP1;2) and plasma membrane (BvPIP2;1) aquaporins show different mechanosensitive properties

Previous works proposed that aquaporins behave as mechanosensitive channels. However, principal issues about mechanosensitivity of aquaporins are not known. In this work, we characterized the mechanosensitive properties of the water channels BvTIP1;2 (TIP1) and BvPIP2;1 (PIP2) from red beet (Beta vulgaris). We simultaneously measured the mechanical behavior and the water transport rates during the osmotic response of emptied-out oocytes expressing TIP1 or PIP2. Our results indicate that TIP1 is a mechanosensitive aquaporin, whereas PIP2 is not. We found that a single exponential function between the osmotic permeability coefficient and the volumetric elastic modulus governs the mechanosensitivity of TIP1. Finally, homology modeling analysis indicates that putative residues involved in mechanosensitivity show different quantity and distribution in TIP1 and PIP2.

Molecular Weight Cut-Off and Structural Analysis of Vacuum-Assisted Titania Membranes for Water Processing

This work investigates the structural formation and analyses of titania membranes (TM) prepared using different vacuum exposure times for molecular weight (MW) cut-off performance and oil/water separation. Titania membranes were synthesized via a sol-gel method and coated on macroporous alumina tubes followed by exposure to a vacuum between 30 and 1200 s and then calcined at 400 °C. X-ray diffraction and nitrogen adsorption analyses showed that the crystallite size and particle size of titania increased as a function of vacuum time. All the TM membranes were mesoporous with an average pore diameter of ~3.6 nm with an anatase crystal morphology. Water, glucose, sucrose, and polyvinylpyrrolidone with 40 and 360 kDa (PVP-40 kDa and PVP-360 kDa) were used as feed solutions for MW cut-off and hexadecane solution for oil filtration investigation. The TM membranes were not able to separate glucose and sucrose, thus indicating the membrane pore sizes are larger than the kinetic diameter of sucrose of 0.9 nm, irrespective of vacuum exposure time. They also showed only moderate rejection (20%) of the smaller PVP-40 kDa, however, all the membranes were able to obtain an excellent rejection of near 100% for the larger PVP-360 kDa molecule. Furthermore, the TM membranes were tested for the separation of oil emulsions with a high concentration of oil (3000 ppm), reaching high oil rejections of more than 90% of oil. In general, the water fluxes increased with the vacuum exposure time indicating a pore structural tailoring effect. It is therefore proposed that a mechanism of pore size tailoring was formed by an interconnected network of Ti–O–Ti nanoparticles with inter-particle voids, which increased as TiO₂ nanoparticle size increased as a function of vacuum exposure time, and thus reduced the water transport resistance through the TM membranes.

Functional assessment of SLC4A11, an integral membrane protein mutated in corneal dystrophies

SLC4A11, a member of the SLC4 family of bicarbonate transporters, is a widely expressed integral membrane protein, abundant in kidney and cornea. Mutations of SLC4A11 cause some cases of the blinding corneal dystrophies, congenital hereditary endothelial dystrophy, and Fuchs endothelial corneal dystrophy. These diseases are marked by fluid accumulation in the corneal stroma, secondary to defective fluid reabsorption by the corneal endothelium. The role of SLC4A11 in these corneal dystrophies is not firmly established, as SLC4A11 function remains unclear. To clarify the normal function(s) of SLC4A11, we characterized the protein following expression in the simple, low-background expression system Xenopus laevis oocytes. Since plant and fungal SLC4A11 orthologs transport borate, we measured cell swelling associated with accumulation of solute borate. The plant water/borate transporter NIP5;1 manifested borate transport, whereas human SLC4A11 did not. SLC4A11 supported osmotically driven water accumulation that was electroneutral and Na⁺ independent. Studies in oocytes and HEK293 cells could not detect Na⁺-coupled HCO₃^- transport or Cl^-/HCO₃^- exchange by SLC4A11. SLC4A11 mediated electroneutral NH₃ transport in oocytes. Voltage-dependent OH^- or H⁺ movement was not measurable in SLC4A11-expressing oocytes, but SLC4A11-expressing HEK293 cells manifested low-level cytosolic acidification at baseline. In mammalian cells, but not oocytes, OH^-/H⁺ conductance may arise when SLC4A11 activates another protein or itself is activated by another protein. These data argue against a role of human SLC4A11 in bicarbonate or borate transport. This work provides additional support for water and ammonia transport by SLC4A11. When expressed in oocytes, SLC4A11 transported NH₃, not NH₃/H^.

The Water to Solute Permeability Ratio Governs the Osmotic Volume Dynamics in Beetroot Vacuoles

Plant cell vacuoles occupy up to 90% of the cell volume and, beyond their physiological function, are constantly subjected to water and solute exchange. The osmotic flow and vacuole volume dynamics relies on the vacuole membrane -the tonoplast- and its capacity to regulate its permeability to both water and solutes. The osmotic permeability coefficient (P_f ) is the parameter that better characterizes the water transport when submitted to an osmotic gradient. Usually, P_f determinations are made in vitro from the initial rate of volume change, when a fast (almost instantaneous) osmolality change occurs. When aquaporins are present, it is accepted that initial volume changes are only due to water movements. However, in living cells osmotic changes are not necessarily abrupt but gradually imposed. Under these conditions, water flux might not be the only relevant driving force shaping the vacuole volume response. In this study, we quantitatively investigated volume dynamics of isolated Beta vulgaris root vacuoles under progressively applied osmotic gradients at different pH, a condition that modifies the tonoplast P_f . We followed the vacuole volume changes while simultaneously determining the external osmolality time-courses and analyzing these data with mathematical modeling. Our findings indicate that vacuole volume changes, under progressively applied osmotic gradients, would not depend on the membrane elastic properties, nor on the non-osmotic volume of the vacuole, but on water and solute fluxes across the tonoplast. We found that the volume of the vacuole at the steady state is determined by the ratio of water to solute permeabilites (P_f /P_s ), which in turn is ruled by pH. The dependence of the permeability ratio on pH can be interpreted in terms of the degree of aquaporin inhibition and the consequently solute transport modulation. This is relevant in many plant organs such as root, leaves, cotyledons, or stems that perform extensive rhythmic growth movements, which very likely involve considerable cell volume changes within seconds to hours.

High light decreases xylem contribution to fruit growth in tomato

Recently, contradicting evidence has been reported on the contribution of xylem and phloem influx into tomato fruits, urging the need for a better understanding of the mechanisms involved in fruit growth. So far, little research has been performed on quantifying the effect of light intensity on the different contributors to the fruit water balance. However, as light intensity affects both transpiration and photosynthesis, it might be expected to induce important changes in the fruit water balance. In this study, tomato plants (Solanum lycopersicum L.) were grown in light and shade conditions and the fruit water balance was studied by measuring fruit growth of girdled and intact fruits with linear variable displacement transducers combined with a model-based approach. Results indicated that the relative xylem contribution significantly increased when shading lowered light intensity. This resulted from both a higher xylem influx and a lower phloem influx during the daytime. Plants from the shade treatment were able to maintain a stronger gradient in total water potential between stem and fruits during daytime, thereby promoting xylem influx. It appeared that the xylem pathway was still functional at 35 days after anthesis and that relative xylem contribution was strongly affected by environmental conditions.

Corneal dystrophy-causing SLC4A11 mutants: suitability for folding-correction therapy

SLC4A11 mutations cause some cases of the corneal endothelial dystrophies, congenital hereditary endothelial corneal dystrophy type 2 (CHED2), Harboyan syndrome (HS), and Fuchs endothelial corneal dystrophy (FECD). SLC4A11 protein was recently identified as facilitating water flux across membranes. SLC4A11 point mutations usually cause SLC4A11 misfolding and retention in the endoplasmic reticulum (ER). We set about to test the feasibility of rescuing misfolded SLC4A11 protein to the plasma membrane as a therapeutic approach. Using a transfected HEK293 cell model, we measured functional activity present in cells expressing SLC4A11 variants in combinations representing the state found in CHED2 carriers, affected CHED2, FECD individuals, and unaffected individuals. These cells manifest respectively about 60%, 5%, and 25% of the water flux activity, relative to the unaffected (WT alone). ER-retained CHED2 mutant SLC4A11 protein could be rescued to the plasma membrane, where it conferred 25%-30% of WT water flux level. Further, some ER-retained CHED2 mutants expressed at 30°C supported increased water flux compared with 37°C cultures. Caspase activation and cell vitality assays revealed that expression of SLC4A11 mutants in HEK293 cells does not induce cell death. We conclude that therapeutics able to increase cell surface localization of ER-retained SLC4A11 mutants hold promise to treat CHED2 and FECD patients.

Nitrogen regulation of transpiration controls mass-flow acquisition of nutrients

Transpiration may enhance mass-flow of nutrients to roots, especially in low-nutrient soils or where the root system is not extensively developed. Previous work suggested that nitrogen (N) may regulate mass-flow of nutrients. Experiments were conducted to determine whether N regulates water fluxes, and whether this regulation has a functional role in controlling the mass-flow of nutrients to roots. Phaseolus vulgaris were grown in troughs designed to create an N availability gradient by restricting roots from intercepting a slow-release N source, which was placed at one of six distances behind a 25 μm mesh from which nutrients could move by diffusion or mass-flow (termed 'mass-flow' treatment). Control plants had the N source supplied directly to their root zone so that N was available through interception, mass-flow, and diffusion (termed 'interception' treatment). 'Mass-flow' plants closest to the N source exhibited 2.9-fold higher transpiration (E), 2.6-fold higher stomatal conductance (gs), 1.2-fold higher intercellular [CO2] (Ci), and 3.4-fold lower water use efficiency than 'interception' plants, despite comparable values of photosynthetic rate (A). E, gs, and Ci first increased and then decreased with increasing distance from the N source to values even lower than those of 'interception' plants. 'Mass-flow' plants accumulated phosphorus and potassium, and had maximum concentrations at 10mm from the N source. Overall, N availability regulated transpiration-driven mass-flow of nutrients from substrate zones that were inaccessible to roots. Thus when water is available, mass-flow may partially substitute for root density in providing access to nutrients without incurring the costs of root extension, although the efficacy of mass-flow also depends on soil nutrient retention and hydraulic properties.

Water proton spin-lattice relaxation time during the apoptotic process in ultraviolet-irradiated murine erythroleukemia cells

Ultraviolet (UV) light-induced apoptosis has been extensively examined, but data on properties of intracellular water are insufficient. Thus, we examined the (1)H spin-lattice relaxation time (T1) of intracellular water during apoptosis in murine erythroleukemia (MEL) cells. Values of T1 decreased upon cell shrinkage, whereas increased upon cell swelling. Similar results were obtained in MEL cells exposed to osmotic stress. Furthermore, the increment of T1 values, ultrastructure loss on cell surface, and DNA fragmentation in UV-treated cells were significantly suppressed by pan-caspase inhibitor. Taken together, these results suggest that the T1 of intracellular water can be used to estimate the relative content of bound and free water during UV-induced apoptosis in MEL cells.

Light and water-use efficiencies of pine shoots exposed to elevated carbon dioxide and temperature

An automatic gas exchange system was used to continuously measure water and carbon fluxes of attached shoots of Scots pine trees (Pinus sylvestris L.) grown in environment-controlled chambers for a 3-year period (1998-2000) and exposed to either normal ambient conditions (CON), elevated CO2 (+350 micro mol mol-1; EC), elevated temperature (+2-6 degrees C; ET) or a combination of EC and ET (ECT). EC treatment enhanced the mean daily total carbon flux per unit projected needle area (Fc.d) by 17-21 %, depending on the year. This corresponds to a 16-24 % increase in light-use efficiency (LUE) based on incident photosynthetically active radiation. The EC treatment reduced the mean daily total water flux (Fw.d) by 1-12 %, corresponding to a 13-35 % increase in water-use efficiency (WUE). The ET treatment increased Fc.d by 10-18 %, resulting in an 8-19 % increase in LUE, and Fw.d by 48-74 %, resulting in a reduction of WUE by 19-34 %. There was no interaction between CO2 and temperature elevation in connection with either carbon or water fluxes, as the carbon flux responded similarly in both ECT and EC, while the water flux in the ECT treatment was similar to that in ET. Regressions indicated that the increase in maximum LUE was greater with increasing air temperature, whereas changes in WUE were related only to high vapour pressure deficit. Furthermore, changes in LUE and WUE caused by ECT treatment displayed strong diurnal and seasonal variation.

Comparison of the gravimetric, phenol red, and 14C-PEG-3350 methods to determine water absorption in the rat single-pass intestinal perfusion model

This study was undertaken to determine whether the gravimetric method provided an accurate measure of water flux correction and to compare the gravimetric method with methods that employ nonabsorbed markers (eg, phenol red and 14C-PEG-3350). Phenol red,14C-PEG-3350, and 4-[2-[[2-(6-amino-3-pyridinyl)-2-hydroxyethyl]amino]ethoxy]-, methyl ester, (R)-benzene acetic acid (Compound I) were co-perfused in situ through the jejunum of 9 anesthetized rats (single-pass intestinal perfusion [SPIP]). Water absorption was determined from the phenol red,14C-PEG-3350, and gravimetric methods. The absorption rate constant (ka) for Compound I was calculated. Both phenol red and 14C-PEG-3350 were appreciably absorbed, underestimating the extent of water flux in the SPIP model. The average +/- SD water flux microg/h/cm) for the 3 methods were 68.9 +/- 28.2 (gravimetric), 26.8 +/- 49.2 (phenol red), and 34.9 +/- 21.9 (14C-PEG-3350). The (average +/- SD) ka for Compound I (uncorrected for water flux) was 0.024 +/- 0.005 min(-1). For the corrected, gravimetric method, the average +/- SD was 0.031 +/- 0.001 min(-1). The gravimetric method for correcting water flux was as accurate as the 2 "nonabsorbed" marker methods.

Influence of Meloidogyne incognita on the Water Relations of Cotton Grown in Microplots

The effects of Meloidogyne incognita on the growth and water relations of cotton were evaluated in a 2-year field study. Microplots containing methyl bromide-fumigated fine sandy loam soil were infested with the nematode and planted to cotton (Gossypium hirsutum L.). Treatments included addition of nematodes alone, addition of nematodes plus the insecticide-nematicide aldicarb (1.7 kg/ha), and an untreated control. Meloidogyne incognita population densities reached high levels in both treatments where nematodes were included. Root galling, plant height at harvest, and seed cotton yield were decreased by nematode infection. In older plants (89 days after planting [DAP]), leaf transpiration rates and stomatal conductance were reduced, and leaf temperature was increased by nematode infection. Nematode infection did not affect (P = 0.05) leaf water potential in either young or older plants but lowered the osmotic potential. The maximum rate and cumulative amount of water flowing through intact plants during a 24-hour period were lower, on both a whole-plant and per-unit-leaf-area basis, in infected plants than in control plants. Application of aldicarb moderated some of the nematode effects but did not eliminate them.