Functional Brush-Decorated Poly(globalide) Films by ARGET-ATRP for Bioconjugation

Enzymatic recycling of polymacrolactones

The use of renewable monomers to make new polyesters which could replace the ones obtained from petrochemical resources employing green processes is a big concern in these days. With this...

Versatility of unsaturated polyesters from electrospun macrolactones: RGD immobilization to increase cell attachment

Poly(globalide) (PGl), an aliphatic polyester derived from unsaturated macrocylic lactone, can be cross-linked during electrospinning and drug-loaded for regenerative medicine applications. However, it lacks intrinsic recognition sites for cell adhesion and proliferation. In order to improve their cell adhesiveness, and therefore their therapeutic potential, we aimed to functionalize electrospun PGl fibers with RGD sequence generating a biomimetic scaffold. First, an amine compound was attached to the surface double bonds of the PGl fibers. Subsequently, the amino groups were coupled with RGD sequences. X-ray photoelectron spectroscopy (XPS) analysis confirmed the functionalization. The obtained fibers were more hydrophilic, as observed by contact angle analysis, and presented smaller Young's modulus, although similar tensile strength compared with non-functionalized cross-linked fibers. In addition, the functionalization process did not significantly alter fibers morphology, as observed by scanning electron microscopy (SEM). Finally, in vitro analysis evidenced the increase in human mesenchymal stromal cells (hMSC) adhesion (9.88 times higher DNA content after 1 day of culture) and proliferation (3.57 times higher DNA content after 8 days of culture) compared with non-functionalized non-cross-linked fibers. This is the first report demonstrating the functionalization of PGl fibers with RGD sequence, improving PGl therapeutic potential and further corroborating the use of this highly versatile material toward regenerative medicine applications.

Copolymacrolactones Grafted with l-Glutamic Acid: Synthesis, Structure, and Nanocarrier Properties

The enzymatic ring-opening copolymerization (eROP) of globalide (Gl) and pentadecalactone (PDL) was performed in solution from mixtures of the two macrolactones at ratios covering the whole range of comonomeric compositions. The resulting P(Glx-r-PDLy) random copolyesters were aminofunctionalized by thiol-ene reaction with aminoethanethiol. ROP of γ-benzyl-l-glutamate N-carboxyanhydride initiated by P(Glx-r-PDLy)-NH2 provided neutral poly(γ-benzyl-l-glutamate)-grafted copolyesters, which were converted by hydrolysis into negatively charged hybrid copolymers. Both water-soluble and nonsoluble copolymers were produced depending on copolymer charge and their grafting degree, and their capacity for self-assembling in nano-objects were comparatively examined. The emulsion solvent-evaporation technique applied to the chloroform-soluble copolymers grafted with benzyl glutamate rendered well-delineated spherical nanoparticles with an average diameter of 200-300 nm. Conversely, micellar solutions in water were produced from copolyesters bearing grafted chains composed of at least 10 units of glutamic acid in the free form. The copolymer micelles were shown to be able to load doxorubicin (DOX) efficiently through electrostatic interactions and also to release the drug at a rate that was markedly pH dependent.

Polyesters with main and side chain phosphoesters as structural motives for biocompatible electrospun fibres

The functionalisation of polymacrolactones with phosphoesters was achieved by thiol–ene coupling resulting in copolymers with modulated properties.

Crosslinking of Electrospun Fibres from Unsaturated Polyesters by Bis-Triazolinediones (TAD)

Crosslinking of an unsaturated aliphatic polyester poly(globalide) (PGl) by bistriazolinediones (bisTADs) is reported. First, a monofunctional model compound, phenyl-TAD (PTAD), was tested for PGl functionalisation. 1H-NMR showed that PTAD-ene reaction was highly efficient with conversions up to 97%. Subsequently, hexamethylene bisTAD (HM-bisTAD) and methylene diphenyl bisTAD (MDP-bisTAD) were used to crosslink electrospun PGl fibres via one- and two-step approaches. In the one-step approach, PGl fibres were collected in a bisTAD solution for in situ crosslinking, which resulted in incomplete crosslinking. In the two-step approach, a light crosslinking of fibres was first achieved in a PGl non-solvent. Subsequent incubation in a fibre swelling bisTAD solution resulted in fully amorphous crosslinked fibres. SEM analysis revealed that the fibres' morphology was uncompromised by the crosslinking. A significant increase of tensile strength from 0.3 ± 0.08 MPa to 2.7 ± 0.8 MPa and 3.9 ± 0.5 MPa was observed when PGI fibres were crosslinked by HM-bisTAD and MDP-bisTAD, respectively. The reported methodology allows the design of electrospun fibres from biocompatible polyesters and the modulation of their mechanical and thermal properties. It also opens future opportunities for drug delivery applications by selected drug loading.

ARGET ATRP of Triblock Copolymers (PMMA-b-PEO-b-PMMA) and Their Microstructure in Aqueous Solution

Triblock copolymers poly(methyl methacrylate)-b-poly(ethylene oxide)-b-poly(methyl methacrylate) (PMMA-b-PEO-b-PMMA) with designed molecular weight of PMMA and PEO blocks were synthesized via the activator regenerated by electron transfer (ARGET) atom transfer radical polymerization (ATRP) of MMA. The Br-terminated Br-PEO-Br with the molecular weights of 20k and 100k were used as  macroinitiators. ARGET ATRP was performed with ppm level amount CuBr2 as the catalyst and ascorbic acid as the reducing agent to overcome the sensitivity to oxygen in a traditional ATRP. The molecular weight of the PMMA block was manipulated by changing the molar ratio of monomers to the Br-PEO-Br macroinitiators. The synthesis of PMMA-b-PEO-b-PMMA and its structure was confirmed by Fourier transform infrared and 1H NMR, and the molecular weight of the PMMA block was determined by 1H NMR. Aqueous solutions of PMMA-b-PEO-b-PMMA were prepared by solvent-exchange, and their microstructures were examined by tensiometry, static light scattering, and transmission electron microscopy. The effects of molecular weight of the PMMA and PEO blocks on the microstructure were elucidated.

Functional biodegradable polymers via ring-opening polymerization of monomers without protective groups

Biodegradable polymers are of current interest and chemical functionality in such materials is often demanded in advanced biomedical applications. Functional groups often are not tolerated in the polymerization process of ring-opening polymerization (ROP) and therefore protective groups need to be applied. Advantageously, several orthogonally reactive functions are available, which do not demand protection during ROP. We give an insight into available, orthogonally reactive cyclic monomers and the corresponding functional synthetic and biodegradable polymers, obtained from ROP. Functionalities in the monomer are reviewed, which are tolerated by ROP without further protection and allow further post-modification of the corresponding chemically functional polymers after polymerization. Synthetic concepts to these monomers are summarized in detail, preferably using precursor molecules. Post-modification strategies for the reported functionalities are presented and selected applications highlighted.

Surface-Initiated Controlled Radical Polymerization: State-of-the-Art, Opportunities, and Challenges in Surface and Interface Engineering with Polymer Brushes

The generation of polymer brushes by surface-initiated controlled radical polymerization (SI-CRP) techniques has become a powerful approach to tailor the chemical and physical properties of interfaces and has given rise to great advances in surface and interface engineering. Polymer brushes are defined as thin polymer films in which the individual polymer chains are tethered by one chain end to a solid interface. Significant advances have been made over the past years in the field of polymer brushes. This includes novel developments in SI-CRP, as well as the emergence of novel applications such as catalysis, electronics, nanomaterial synthesis and biosensing. Additionally, polymer brushes prepared via SI-CRP have been utilized to modify the surface of novel substrates such as natural fibers, polymer nanofibers, mesoporous materials, graphene, viruses and protein nanoparticles. The last years have also seen exciting advances in the chemical and physical characterization of polymer brushes, as well as an ever increasing set of computational and simulation tools that allow understanding and predictions of these surface-grafted polymer architectures. The aim of this contribution is to provide a comprehensive review that critically assesses recent advances in the field and highlights the opportunities and challenges for future work.

Synthesis of amphiphilic nanoparticles and multi-block hydrophilic copolymers by a facile and effective “living” radical polymerization in water

A convenient and robust approach using MANDC-COOH as the initiator and oxidatively stable Cu(OAc)₂as the catalyst to synthesize amphiphilic nanoparticles and hydrophilic multi-block copolymers was successfully developed in water.