Cellulose carbonates: a platform for promising biopolymer derivatives with multifunctional capabilities

Cellulose carbamates via transcarbamoylation/transurethanization of methyl carbamates in superbase-acid conjugate ionic liquids

A sustainable homogeneous transcarbamoylation/transurethanization protocol for cellulose modification with methyl N-substituted carbamates was developed. The protocol utilizes the superbase ionic liquid [mTBNH][OAc], not only as a green reaction medium, but also as a promotor of the transformation. This approach allows to obtain different cellulose carbamates with controllable degrees of substitution. The solubility of the obtained materials from the newly developed method was compared with the solubility of materials obtained from the isocyanate approach, where some intrinsic trends were observed.

Structural Characterization of 6-Halo-6-Deoxycelluloses by Direct-Dissolution Solution-State NMR Spectroscopy

Regioselective modifications of cellulose using activated cellulose derivatives such as 6-halo-6-deoxycelluloses provide a convenient approach for developing sustainable products with properties tailored to specific applications. However, maintaining precise regiochemical control of substituent distribution in 6-halo-6-deoxycelluloses is challenging due to their insolubility in most common solvents and the resulting difficulties in precise structure elucidation by modern instrumental analytical techniques. Herein, an accessible NMR-based approach toward detailed characterization of 6-halo-6-deoxycelluloses, including the determination of the degrees of substitution at carbon 6 (DS6), is presented. It is shown that the direct-dissolution cellulose solvent, tetrabutylphosphonium acetate:DMSO-d6, converts 6-halo-6-deoxycelluloses to 6-monoacetylcellulose, enabling in situ solution-state NMR measurements. A range of 1D and 2D NMR experiments is used to demonstrate the quantitivity of the conversion and provide optimum dissolution conditions. In comparison with other NMR-based derivatization protocols for elucidating the structure of 6-halo-6-deoxycelluloses, the presented approach offers major advantages in terms of accuracy, speed, and simplicity of analysis, and minimal requirements for reagents or NMR instrumentation.

Synthesis and characterization of nucleophilic polysaccharide carbazates

A simple synthesis of amino polysaccharides (PS) could be developed. Phenyl carbonates (PC) of xylan, dextran, and cellulose were easily transferred into PS carbazates by conversion with hydrazine hydrate. The degree of substitution could be adjusted by varying the molar ratio of hydrazine to PS repeating unit, enabling the preparation of both pure PS carbazates and derivatives with bifunctional reactivity containing the reactive PC and the amino group of the carbazate moiety. Further functionalization of the derivatives is feasible with carbonyl compounds like aldehydes at the carbazate groups. The reactivity of carbazate groups is shown by the reaction with 4-fluorobenzaldehyde, resulting in the formation of Schiff base conjugates.

Sodium Alginate- and Cationic Cellulose-Functionalized Polycaprolactone Nanofibers for In Vitro and Antibacterial Applications

The use of polyelectrolytes is emerging as a fascinating strategy for the functionalization of biomedical membranes, due to their ability to enhance biological responses using the interaction effect of charged groups on multiple interface properties. Herein, two different polyelectrolytes were used to improve the antibacterial properties of polycaprolactone (PCL) nanofibers fabricated via electrospinning. First, a new cationic cellulose derivative, cellulose-bearing imidazolium tosylate (CIMD), was prepared via the nucleophilic substitution of the tosyl group using 1-methylimidazole, as confirmed by NMR analyses, and loaded into the PCL nanofibers. Secondly, sodium alginate (SA) was used to uniformly coat the fibers' surface via self-assembly, as remarked through SEM-EDX analyses. Polyelectrolyte interactions between the CIMD and the SA, initially detected using a FTIR analysis, were confirmed via Z potential measurements: the formation of a CMID/SA complex promoted a substantial charge neutralization of the fibers' surfaces with effects on the physical properties of the membrane in terms of water adsorption and in vitro degradation. Moreover, the presence of SA contributed to the in vitro response of human mesenchymal stem cells (hMSCs), as confirmed by a significant increase in the cells' viability after 7 days in the case of the PCL/CMID/SA complex with respect to the PCL and PCL/CMID membranes. Contrariwise, SA did not nullify the antibacterial effect of CMID, as confirmed by the comparable resistance exhibited by S. mutans, S. aureus, and E. coli to the PCL/CIMD and PCL/CIMD/SA membranes. All the reported results corroborate the idea that the CIMD/SA functionalization of PCL nanofibers has a great potential for the fabrication of efficient antimicrobial membranes for wound healing.

Dextran thioparaconate - Evaluation of the multifunctional thiolactone linker for easily adaptable polysaccharide modification

For the preparation of tailored polymers based on polysaccharides, an easy adaptable modification method was developed by introduction of a multifunctional linker into the polymer backbone. Dextran was functionalized with a thiolactone compound that can be further treated with amine resulting in ring opening and formation of a thiol. The functional thiol group emerging can be used for crosslinking or introduction of a further functional compound by disulfide formation. Here, the efficient esterification of thioparaconic acid after in-situ activation and studies about reactivity of the dextran thioparaconate obtained are discussed. The derivative was converted by aminolysis with model compound hexylamin and the thiol generated therefrom was subsequently converted with an activated functional thiol to the corresponding disulfide. The thiolactone, which protects the thiol, enables efficient esterification without side reactions and allows storage of the polysaccharide derivative at ambient conditions for years. Not only the multifunctional reactivity of the derivative but also the end product with a balanced ratio of hydrophobic and cationic moiety is appealing for biomedical application.

Synthesis of Polyanionic Cellulose Carbamates by Homogeneous Aminolysis in an Ionic Liquid/DMF Medium

Polyanionic cellulose carbamates were synthesized by rapid and efficient homogeneous aminolysis of cellulose carbonate half-esters in an ionic liquid/DMF medium. Cellulose bis-2,3-O-(3,5-dimethylphenyl carbamate), as a model compound, reacted with different chloroformates to cellulose carbonates. These intermediates were subjected to aminolysis, for which both the reactivity of different chloroformates towards C6-OH and the reactivity/suitability of the respective carbonate half-ester in the aminolysis were comprehensively studied. Phenyl chloroformate and 4-chlorophenyl chloroformate readily reacted with C6-OH of the model cellulose derivative, while 4-nitrophenyl chloroformate did not. The intermediate 4-chlorophenyl carbonate derivative with the highest DS (1.05) was then used to evaluate different aminolysis pathways, applying three different amines (propargyl amine, β-alanine, and taurine) as reactants. The latter two zwitterionic compounds are only sparingly soluble in pure DMF as the typical reaction medium for aminolysis; therefore, several alternative procedures were suggested, carefully evaluated, and critically compared. Solubility problems with β-alanine and taurine were overcome by the binary solvent system DMF/[EMIM]OAc (1:1, v/v), which was shown to be a promising medium for rapid and efficient homogeneous aminolysis and for the preparation of the corresponding cellulose carbamate derivatives or other compounds that are not accessible by conventional isocyanate chemistry. The zwitterionic cellulose carbamate derivatives presented in this work could be promising chiral cation exchangers for HPLC enantiomer separations.

Indium(III)-Catalyzed Synthesis of Primary Carbamates and N-Substituted Ureas

An indium triflate-catalyzed synthesis of primary carbamates from alcohols and urea as an ecofriendly carbonyl source has been developed. Various linear, branched, and cyclic alcohols were converted into the corresponding carbamates in good to excellent yields. This method also provided access to N-substituted ureas by carbamoylation of amines. All the products were obtained by simple filtration or crystallization, without the need for chromatographic purification. Mechanistic investigations suggest that the carbamoylation reaction proceeds through activation of urea by O-coordination with indium, followed by nucleophilic attack by the alcohol or amine on the carbonyl center of urea. The inexpensive and easily available starting materials and catalyst, the short reaction times, and the ease of product isolation highlight the inherent practicality of the developed method.

Reactive Nanoparticles Derived from Polysaccharide Phenyl Carbonates

Polysaccharide (PS) based nanoparticles (NP) are of great interest for biomedical applications. A key challenge in this regard is the functionalization of these nanomaterials. The aim of the present work was the development of reactive PS-NP that can be coupled with an amino group containing compounds under mild aqueous conditions. A series of cellulose phenyl carbonates (CPC) and xylan phenyl carbonates (XPC) with variable degrees of substitution (DS) was obtained by homogeneous synthesis. The preparation of PS-NP by self-assembling of these hydrophobic derivatives was studied comprehensively. While CPC mostly formed macroscopic aggregates, XPC formed well-defined spherical NP with diameters around 100 to 200 nm that showed a pronounced long-term stability in water against both particle aggregation as well as cleavage of phenyl carbonate moieties. Using an amino group functionalized dye it was demonstrated that the novel XPC-NP are reactive towards amines. A simple coupling procedure was established that enables direct functionalization of the reactive NP in an aqueous dispersion. Finally, it was demonstrated that dye functionalized XPC-NP are non-cytotoxic and can be employed in advanced biomedical applications.

Recent Progress on Cellulose-Based Ionic Compounds for Biomaterials

Glycans play important roles in all major kingdoms of organisms, such as archea, bacteria, fungi, plants, and animals. Cellulose, the most abundant polysaccharide on the Earth, plays a predominant role for mechanical stability in plants, and finds a plethora of applications by humans. Beyond traditional use, biomedical application of cellulose becomes feasible with advances of soluble cellulose derivatives with diverse functional moieties along the backbone and modified nanocellulose with versatile functional groups on the surface due to the native features of cellulose as both cellulose chains and supramolecular ordered domains as extractable nanocellulose. With the focus on ionic cellulose-based compounds involving both these groups primarily for biomedical applications, a brief introduction about glycoscience and especially native biologically active glycosaminoglycans with specific biomedical application areas on humans is given, which inspires further development of bioactive compounds from glycans. Then, both polymeric cellulose derivatives and nanocellulose-based compounds synthesized as versatile biomaterials for a large variety of biomedical applications, such as for wound dressings, controlled release, encapsulation of cells and enzymes, and tissue engineering, are separately described, regarding the diverse routes of synthesis and the established and suggested applications for these highly interesting materials.

Immobilization of Ionic Liquids with a New Cellulose Ester Containing Imidazolium Cation for High-Performance CO2 Separation Membranes

CO₂ gas separation is of significant importance to protect the environment and utilize the carbon resource. In this work, two kinds of new cellulose esters containing imidazolium cation, cellulose acetate (CA) 1-butyl-3-methylimidazolium chloride and CA 1-butyl-3-methylimidazolium bis(trifluoromethane sulfonyl)imide (CA-BmimTf₂ N), are designed and synthesized. The resultant cationized cellulose esters effectively lock various ionic liquids (ILs) via electrostatic interactions. Due to the strong attraction interactions, the obtained cellulose ester/ILs composite membranes are uniform, smooth, and highly transparent. Moreover, the added ILs with a long alkyl chain in the cation and a bis(trifluoromethane sulfonyl)imide anion remarkably improve the CO₂ permeability of the cellulose ester/ILs membranes, because of the dramatic increase of the CO₂ diffusion rate. The CA-BmimTf₂ N/C₁₀ mimTf₂ N membranes exhibit the highest CO₂ permeability, which is 3800% higher than that of CA membrane and 1700% higher than that of CA-BmimTf₂ N membrane. More importantly, the CA-BmimTf₂ N/C₁₀ mimTf₂ N membranes have good mechanical properties and thermal stability. Such high-performance CO₂ separation membranes with high CO₂ permeability, high transparency, and good mechanical property have a huge potential in the practical utilization for gas separation.

Carbon fibers coated with urchin-like copper sulfide for nonenzymatic voltammetric sensing of glucose

Urchin-like CuS was grown on xanthan gum-derived carbon nanofibers to obtain a sensor for enzyme-free electrochemical sensing of glucose. The unique nanostructure of the sensor provides a large specific surface, more electrocatalytically active sites, and high electrical conductivity. The voltammetric response to glucose, best measured at around 57 mV (vs. Ag/AgCl (E/V)) in 0.1 M NaOH solution, covers two linear ranges, one from 0.1-125 μM, another from 0.16 to 1.2 mM. The sensitivity is quite high (23.7 μA mM^-1 cm^-2), and the detection limit is low (19 nM at S/N = 3). The sensor has high selectivity against potentially interfering molecules such as fructose, appreciable operational stability, excellent durability, and good repeatability (with relative standard deviations of 2.3%). It was successfully applied to the determination of glucose in diluted serum samples. Graphical abstractSchematic representation of electrochemical detection of glucose based on the use of a screen printed carbon electrode (SPCE) modified with CuS and xanthan gum-derived carbon nanofibers (XGCNFs).

Modular synthesis of non-charged and ionic xylan carbamate derivatives from xylan carbonates

Novel non-charged and ionic xylan carbamate (XC) derivatives were synthesized in a modular approach from xylan phenyl carbonates (XPC) as reactive intermediates. XPC with varying degrees of substitution (DS) from 0.5 to 1.9 were converted with different non-ionic primary and secondary amines in different molar ratio to obtain the corresponding XC with high conversion rates of up to 100%. In a similar way, ionic amines were employed for the aminolysis of XPC to obtain charged XC. The XC were characterized by NMR- and infrared spectroscopy. XPC proofed to be highly versatile building blocks for the preparation of ionic xylan derivatives. The type and amount of charged groups could be tuned efficiently. Moreover, high DS values of up to 1.4 for cationic and 1.8 for anionic XC derivatives could be achieved, which is higher than reported previously for comparable ionic xylan derivatives that were prepared by "conventional" esterification and etherification reactions.

Synthesis of xylan carbonates - An approach towards reactive polysaccharide derivatives showing self-assembling into nanoparticles

Xylan phenyl carbonate (XPC) derivatives were prepared and characterized comprehensively. By conversion of xylan with phenyl chloroformate either in dipolar aprotic solvents with LiCl or in an ionic liquid, XPC with degrees of substitution (DS) of up to 2.0, i.e., fully functionalized derivatives, could be obtained. The synthesis was studied with respect to the influence of different reaction parameters. It was found that the reaction medium as well as the type of starting xylan strongly affected the efficiency of the derivatization. The derivatives obtained were characterized by FT-IR- and NMR spectroscopy. Surprisingly, it was found that C-3 is the most reactive position in this particular reaction while substitution in position C-2 only occurred if the neighboring position C-3 already carried a phenyl carbonate group. XPC were found to form spherical nanoparticles (NP) of well-defined shape with diameters around 158 nm. These materials possess unique potential as activated NP for advanced applications.

A New Way to Produce Cellobiose Carbonates Using Green Chemistry

The preparation of cellulose derivatives using green (i.e., environmentally friendly) reagents would improve sustainability and reduce concerns arising from the use of non-green reagents. The objective of this work was to prepare cellobiose carbonate using a green reagent, dimethyl carbonate. The carbonation reaction was carried out in the presence of ethanolic potassium hydroxide solution and dimethyl carbonate for 6 h at a range of temperatures (25-70 °C). A cellobiose derivative was successfully prepared with a recovered yield of more than 70 % and characterized by FTIR and NMR spectroscopy techniques. The presence of a grafted disaccharide with a degree of substitution higher than 2 was determined by (13) C NMR analysis. The spectra of the prepared cellobiose carbonate exhibited peaks that were associated with cellulose molecules (C1 -C6 ) and corresponded to carbonate functions at around 159.4 ppm.

Reactive cellulose-based thin films – a concept for multifunctional polysaccharide surfaces

Reactive coatings of hydroxyethyl cellulose furoate in the form of thin films, suitable for the covalent immobilization of functional molecules, were developed and characterized in this work.