A Novel, Amphiphilic Ethyl Cellulose Grafting Copolymer with Poly(2-Hydroxyethyl Methacrylate) Side Chains and Its Micellization

Synthesis, Characterization, and Evaluation of the Adsorption Behavior of Cellulose-Graft-Poly(Acrylonitrile-co-Acrylic Acid) and Cellulose-Graft-Poly(Acrylonitrile-co-Styrene) towards Ni(II) and Cu(II) Heavy Metals

In this study, the synthesis and characterization of grafted cellulose fiber with binary monomers mixture obtained using a KMnO4/citric acid redox initiator were investigated. Acrylonitrile (AN) was graft copolymerized with acrylic acid (AA) and styrene (Sty) at different monomer ratios with evaluating percent graft yield (GY%). Cell-g-P(AN-co-AA) and Cell-g-P(AN-co-Sty) were characterized by SEM, FT-IR, 13C CP MAS NMR, TGA, and XRD. An AN monomer was used as principle-acceptor monomer, and GY% increases with AN ratio up to 60% of total monomers mixture volume. The adsorption behaviors of Cell-g-P(AN-co-AA) and Cell-g-P(AN-co-Sty) were studied for the adsorption of Ni(II) and Cu(II) metal ions from aqueous solution. Optimal adsorption conditions were determined, including 8 h contact time, temperature of 30 °C, and pH 5.5. Cell-g-P(AN-co-AA) showed maximum adsorption capacity of 435.07 mg/g and 375.48 mg/g for Ni(II) and Cu(II), respectively, whereas Cell-g-P(AN-co-Sty) showed a maximum adsorption capacity of 379.2 mg/g and 349.68 mg/g for Ni(II) and Cu(II), respectively. Additionally, adsorption equilibrium isotherms were studied, and the results were consistent with the Langmuir model. The Langmuir model's high determinant coefficient (R2) predicted monolayer sorption of metal ions. Consequently, Cell-g-P(AN-co-AA) and Cell-g-P(AN-co-Sty) prepared by a KMnO4/citric acid initiator were found to be efficient adsorbents for heavy metals from wastewater as an affordable and adequate alternative.

Cellulose Amphiphilic Materials: Chemistry, Process and Applications

In the last decade, amphiphilic cellulose (AC) is emerging as attractive biomaterial for different therapeutic use, due to its unique chemical and physical properties. Using it as alternative to synthetic polymers, AC opens up new avenues to prepare new bio-sustainable materials with low impact in the cellular environment. Herein, most recent methods to synthesize and processing AC materials from different sources—i.e., cellulose nanofibers, bacterial cellulose, cellulose derivatives—will be discussed. By an accurate optimization of morphology and surface chemistry, it is possible to develop innovative amphiphilic platforms, promising for a wide range of biomedical applications, from drug delivery to molecular/particle adsorption.

Controlled-release urea encapsulated by ethyl cellulose/butyl acrylate/vinyl acetate hybrid latex

Fertilizer encapsulation through polymer membranes can reduce fertilizer losses and minimize environmental pollution. In this paper, an emulsion of ethyl cellulose (EC)/vinyl acetate (VAc)/butyl acrylate (BA) was successfully prepared by pre-emulsified semi-continuous seed emulsion polymerization. EC/BA/VAc films showed biodegradability. The influence of the EC content on the properties of EC/BA/VAc films was also investigated by DSC, a water absorbency analysis, etc. Controlled-release urea encapsulated by EC/BA/VAc latex was prepared in a film coating machine and conformed to the standards for slow-release fertilizers of the Committee of European Normalization. The release of urea from controlled-release urea encapsulated by EC/BA/VAc latex containing 0%, 5%, 10%, and 15% EC was 75.1%, 65.8%, 70.1% and 84.1%, respectively, after 42 days, and controlled-release urea encapsulated by EC/BA/VAc latex (5% EC) had the best controlled-release ability. Therefore, controlled-release urea encapsulated by EC/BA/VAc latex has many potential applications in agricultural industry.

Preparation, Structure, and Properties of Silk Fabric Grafted with 2-Hydroxypropyl Methacrylate Using the HRP Biocatalyzed ATRP Method

Atom transfer radical polymerization (ATRP) is a “living”/controlled radical polymerization, which is also used for surface grafting of various materials including textiles. However, the commonly used metal complex catalyst, CuBr, is mildly toxic and results in unwanted color for textiles. In order to replace the transition metal catalyst of surface-initiated ATRP, the possibility of HRP biocatalyst was investigated in this work. 2-hydroxypropyl methacrylate (HPMA) was grafted onto the surface of silk fabric using the horseradish peroxidase (HRP) biocatalyzed ATRP method, which is used to improve the crease resistance of silk fabric. The structure of grafted silk fabric was characterized by Fourier transform infrared spectrum, X-ray photoelectron spectroscopy, thermogravimetic analysis, and scanning electron microscopy. The results showed that HPMA was successfully grafted onto silk fabric. Compared with the control silk sample, the wrinkle recovery property of grafted silk fabric was greatly improved, especially the wet crease recovery property. However, the whiteness, breaking strength, and moisture regain of grafted silk fabric decreased somewhat. The present work provides a novel, biocatalyzed, environmentally friendly ATRP method to obtain functional silk fabric, which is favorable for clothing application and has potential for medical materials.

The preparation of graft copolymers of cellulose and cellulose derivatives using ATRP under homogeneous reaction conditions

Atom transfer radical polymerisation (ATRP) is used to modify cellulose and cellulose derivatives under homogeneous conditions, yielding novel materials for application in areas such as drug delivery.

Using Controlled Graft Copolymerization Technology to Prepare Structure-Controllable Cellulose Functional Materials

Cellulose is the most abundant, renewable, and biodegradable natural resource on the earth. Grafting copolymerization technique is one of the key methods to widen the application scope of cellulose. This paper concerned with the recent progress and application of living/controlled radical graft polymerization techniques such as NMP, ATRP, and RAFT in the grafting modification of cellulose. The advantages and disadvantage of them were also reviewed.

Modification of polysaccharides through controlled/living radical polymerization grafting-towards the generation of high performance hybrids

This review covers the literature concerning the modification of polysaccharides through controlled radical polymerizations (NMP, ATRP and RAFT). The different routes to well-defined polysaccharide-based macromolecules (block and graft copolymers) and graft-functionalized polysaccharide surfaces as well as the applications of these polysaccharide-based hybrids are extensively discussed.

Self-assembly and dual-stimuli sensitivities of hydroxypropylcellulose-graft-poly(N,N-dimethyl aminoethyl methacrylate) copolymers in aqueous solution

The self-assembly and pH- and thermo-sensitivities properties of hydroxypropyl cellulose-graft-poly(N,N-dimethyl aminoethyl methacrylate) (HPC-g-PDMAEMA) copolymers in aqueous solutions were investigated by transmittance, dynamic light scattering (DLS), and (1)H NMR spectroscopy. Micelles with different structure can be formed by varying either pH value or temperature. At low pH, e.g., 3.0, the HPC backbone of the copolymer collapse to form the core of micelles stabilized with protonated PDMAEMA side chains on the surface of the micelles upon heating. At the medium pH, e.g., 8.1, both HPC backbone and PDMAEMA side chains collapse upon heating to form unstable aggregates. At high pH, e.g., 12.3, PDMAEMA side chains collapse first to form the core of micelles stabilized with HPC chains upon heating. Further heating the copolymer solution at this pH leads to the aggregation of the micelles due to the collapse of the shell HPC chains. The thermal sensitivity of the HPC-g-PDMAEMA copolymers is reversible.