Preparation of polyphenol-structural colored silk fabrics with bright colors

Conventional textile dyeing relies on the use of dyes and pigments, which can cause severe environmental contamination and waste a large amount of water. Structural coloring is one of the effective ways to achieve environmentally friendly coloring of textiles. In this work, three plant polyphenols with the same o-benzenetriol structure (tannic acid (TA), gallic acid (GA), and tea polyphenol (TP)) were selected as raw materials. Three plant polyphenols can quickly form nanofilms at the gas-liquid interface through a Schiff base reaction with polyethyleneimine (PEI) under mildly alkaline conditions, which were deposited to the surface of silk fabric, allowing precise control over the thickness of film by adjusting the time, resulting in various structurally colored silk fabric. This method for creating structural colors is not substrate-specific and enables the quick production of structural colors on various textile substrates. Furthermore, the structural color silk fabric based on plant polyphenol has antibacterial performance. This textile coloring method is simple, cost-effective and environmentally friendly, providing a new approach to eco-friendly textile dyeing.

Preparation of Flower-like Nanosilver Based on Bioderived Caffeic Acid for Raman Enhancement and Dye Degradation

In this study, a simple, green, and low-cost room temperature synthesis of broccoli-like silver nanoflowers (AgNF) with a particle size of about 300-500 nm was developed using plant-derived caffeic acid as a reducing agent and polyvinylpyrrolidone as a dispersant under ultrasound assistance. The flower clusters covered by small nanocrystals of 20-50 nm significantly enhance the electromagnetic field signals. AgNF was deposited on the surface of silicon wafers as a surface-enhanced Raman spectroscopy sensor for the detection of probe molecules such as rhodamine 6G (R6G) and malachite green with high sensitivity, homogeneity, and reproducibility. AgNF was deposited on cotton fabrics in the form of composites to catalyze the degradation of dye pollutants such as R6G, MG, and methyl orange in the presence of sodium borohydride. 0.1 g of AgNF/cotton fabric could assist 15 mmol/L NaBH4 to achieve over 90% degradation of various dyes as well as a high concentration of dyes in 12 min with good reusability and recyclability. The AgNF synthesized in this work can not only monitor the type and amounts of pollutants (dyes) in wastewater but also catalyze the rapid degradation of dyes, which is expected to be valuable for industrial applications.

Preparation of Fe3O4@CA/BNNS/AgNP Magnetic Microspheres and Photocatalysis of Dyes

In this work, sea urchin-like magnetic Fe3O4@CA/BNNS/AgNP composite microspheres were successfully prepared. The photocatalytic performance of composite microspheres for the organic dye rhodamine B (RhB) was systematically investigated under different conditions, and the catalytic degradation rate of RhB was as high as 95% within 60 min; after three cycles of recycling, the degradation rate of RhB was reduced by only 8%. The main active agents in the reaction are e- and •O2-. Fe3O4@CA/BNNS/AgNP microspheres prepared in this study exhibit photocatalytic and electrochemical properties, making them easy to separate. This work is not limited to the development of Fe3O4-based catalysts but also is expected to provide ideas for the research and progress of photocatalytic composite catalysts with electrochemical properties.

Study on the Effect of Chitosan Modification Technology on Antibacterial Properties of Textiles

The chitosan is fixed in an amide group of activated carboxyl groups and biological primary amino groups of nonwoven PET for antibacterial properties. Uncoated materials have fewer wetting properties and are less biocompatible. The objectives of the study were to evaluate surface chemical compositions and biocompatibility, antibacterial, and hydrophilic properties of polyester fabrics grafted with chitosan oligomers and after being activated by atmospheric pressure plasmas. A 2% 14.8 mg/cm2 uncolored PET woven fabric was dissolved in chitosan solution. Atmospheric pressure plasmas were used to activate polyester fabrics grafted with chitosan oligomers on both sides. Cell proliferation assay was performed for the biocompatibility study. The American Association of Textile Chemists and Colorists method was used to measure the width of the antibacterial zone and the Japanese Industrial Standard was used to count the number of bacterial colonies. Chitosan-coated and -activated uncolored PET woven fabric showed fewer percentage free carbon (p < 0.0001), higher percentage free oxygen to free carbon ratio (p < 0.0001), higher percentage free nitrogen to free carbon ratio (p = 0.0453), and higher percentage free oxygen plus free nitrogen to free carbon ratio (p < 0.0001) than untreated PET woven fabric. The dynamic contact angle of a water droplet and the wicking time were shorter for chitosan-coated and -activated uncolored PET woven fabric than untreated PET weaved fabric (p < 0.0001 for all). Chitosan coating leads to PET woven fabric being higher biocompatible, wettable, and antibacterial than untreated PET woven fabric.

Preparation of CS-LS/AgNPs Composites and Photocatalytic Degradation of Dyes

Synthetic dyes are prone to water pollution during use, jeopardizing biodiversity and human health. This study aimed to investigate the adsorption and photocatalytic assist potential of sodium lignosulfonate (LS) in in situ reduced silver nanoparticles (AgNPs) and chitosan (CS)-loaded silver nanoparticles (CS-LS/AgNPs) as adsorbents for Rhodamine B (RhB). The AgNPs were synthesized by doping LS on the surface of chitosan for modification. Fourier transform infrared (FT-IR) spectrometry, energy-dispersive spectroscopy (EDS), scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) were used to confirm the synthesis of nanomaterials. The adsorption and photocatalytic removal experiments of RhB were carried out under optimal conditions (initial dye concentration of 20 mg/L, adsorbent dosage of 0.02 g, time of 60 min, and UV power of 250 W), and the kinetics of dye degradation was also investigated, which showed that the removal rate of RhB by AgNPs photocatalysis can reach 55%. The results indicated that LS was highly effective as a reducing agent for the large-scale production of metal nanoparticles and can be used for dye decolorization. This work provides a new catalyst for the effective removal of dye from wastewater, and can achieve high-value applications of chitosan and lignin.

Preparation of Natural Plant Polyphenol Catechin Film for Structural Coloration of Silk Fabrics

Traditional textile dyeing uses chemical pigments and dyes, which consumes a large amount of water and causes serious environmental pollution. Structural color is an essential means of achieving green dyeing of textiles, and thin-film interference is one of the principles of structural coloring. In the assembly of structural color films, it is necessary to introduce dark materials to suppress light scattering and improve the brightness of the fabric. In this study, the conditions for the generation of nanofilms of catechin (CC) at the gas-liquid interface were successfully investigated. At the same time, environmentally friendly colored silk fabrics were novelly prepared using polycatechin (PCC) structural color films. In addition, it was found that various structural colors were obtained on the surface of silk fabrics by adjusting the time. Meanwhile, the color fastness of the structural colored fabrics was improved by introducing polyvinylpyrrolidone (PVP) to form a strong hydrogen bond between the fabric and catechin. PCC film is uniform and smooth, with a special double-layer structure, and can be attached to the surface of silk fabrics, giving the fabrics special structural colors. Through the thin-film interference formed between the visible light and the PCC film, the silk fabrics obtain bright, controllable, and uniform structural colors. This method is easy to operate and provides a new way of thinking for environmental-protection-oriented coloring of fabrics.

Preparation of Superhydrophobic Fabric Based on Dopamine and Michael Addition under Ultraviolet Light

This work reports a simple, stable, and environmentally friendly method to prepare durable superhydrophobic surfaces. First, a polydopamine coating is formed by oxidative polymerization of dopamine to form a secondary reaction platform to provide reaction sites for subsequent experiments. We applied a polydopamine layer onto a fiber surface using the Michael addition-reaction-grafted tetrakis (3-mercaptopropionic acid) pentaerythritol ester, followed by the introduction of tetraallyl silane and (mercapto) methyl siloxane-dimethyl siloxane copolymer on the polydopamine by a thiol-ene click-reaction under ultraviolet light. The resulting superhydrophobic Nylon 56 fabric exhibited a 166° static contact angle as well as excellent stability. The surface morphology of all samples was observed by field emission scanning electron microscope, X-ray photoelectron spectroscopy and energy dispersion spectroscopy, and the elemental composition and surface chemical state of the samples were analyzed. It also had the ability of oil-water separation. Fabric with such benefits broadens the applicability and innovation of superhydrophobic textiles for environmental and industrial applications.

Fabrication of Robust Superhydrophobic Polyester Fabrics with Photothermal Conversion and Oil-Water Separation Performance through Deposition of Natural Polyphenols

Superhydrophobic polyester (PET) fabrics were created by increasing fabric surface roughness and decreasing surface energy through interactions between natural polyphenols, ferrous sulfate heptahydrate, and hexadecyltrimethoxysilane. The superhydrophobic fabric can be obtained with different natural polyphenols, including tannic acid, ferulic acid, gallic acid, guaiacol, and caffeic acid. Durability tests were carried out on the superhydrophobic PET fabric, investigating resistance to washing, rubbing, UV aging, acids, alkalis, and organic reagents. The results demonstrate the stability and versatility of modified PET in complex environments. The modified superhydrophobic PET fabric exhibited exceptional oil-water separation and self-cleaning properties, exhibiting a water contact angle of 161.3° and a sliding angle of 4°. In addition, the modified fabric demonstrated a remarkable photothermal conversion efficiency, with the surface temperature increasing from 29.1 to 72 °C in 300 s, and it maintained a degree of photothermal conversion capability even upon completion of four cycles. This study offers novel perspectives on extending the utilization of natural polyphenols for constructing durable, robust, and multifunctional superhydrophobic fabrics.

Robust and flexible smart silk/PEDOT conductive fibers as wearable sensor for personal health management and information transmission

Flexible highly conductive fibers have attracted much attention due to their great potential in the field of wearable electronic devices. In this work, silk/PEDOT conductive fibers with a resistivity of 1.73 Ω·cm were obtained by oxidizing Ce3+ with H2O2 under alkaline conditions to produce CeO2 and further promote the in-situ polymerization of 3,4-ethylenedioxythiophene (EDOT) on the surface of silk fibers. The morphology and chemical composition of the silk/PEDOT conductive fibers were characterized and the results confirmed that a large amount of polythiophene was synthesized and deposited on the surface of silk fibers. The conductivity and electrochemical property stability of the silk/PEDOT conductive fibers were evaluated by soaping and organic solvent immersion, and the conductive silk fibers exhibited excellent environmental stability and durability. The silk/PEDOT conductive fibers show good pressure sensing and strain sensing performance, which exhibits high sensitivity, fast response and cyclability, and have excellent applications in personal health monitoring, human-machine information transmission, etc.

Performance of Washing-Free Printing of Disperse Dye Inks: Influence of Water-Borne Polymers

Dye-containing wastewater discharge from the textile industry poses a serious pollution hazard that can be overcome by eliminating the washing step following the dyeing process. To study the washing-free printing of disperse dye ink, a number of water-borne polymers were selected and added to the ink, and the properties of the inks were discussed. By optimizing the ink formulation, printed fabrics with high color strength and color fastness were produced. The effects of the addition of polyvinylpyrrolidone (PVP), polyvinyl alcohol (PVA), and polyethylene glycol (PEG) on the ink jetting performance and printing performance were intensively investigated. The migration–diffusion–fixation behavior of disperse dyes in inks on the polyester fiber was explored. The disperse dye ink with 0.075 wt.% PVA exhibited the strongest migration–diffusion effect. The PVA ink exhibited excellent jetting performance and printing color fastness, and the printing color strength was better than that of the PVP and PEG ink. The addition of PVA increased the difference between the solubility parameter of the disperse dyes and ink system, which improved the migration of disperse dyes from the ink system to the polyester fabric. Meanwhile, PVA could form a protective layer on printed fabrics because of its excellent film-forming properties at room temperature. The washing-free inkjet printing method developed in this study provides a theoretical basis for screening water-borne polymers and an environmentally friendly pathway for the printing of textiles.

Fabrication of robust silver plated conductive polyamide fibres based on tannic acid modification

A novel method for the preparation of silver plated conductive polyamide fibres (PA/Ag) based on tannic acid modification was reported in this work. The highly adhesive tannic acid was grafted onto the surface of sulphuric acid roughened polyamide fibres to sensitize the fibre. Then, the sensitized polyamide fibres were activated by low-concentration silver nitrate to form reactive centers. Chemical silver plating was finally carried out using silver ammonia solution with glucose. The surface morphology and chemical properties of the prepared polyamide fibres were analyzed and the surface resistance, fastness to washing, thermal decomposition properties, electrothermal properties, sensing properties and practical applications of the silver-plated polyamide fibres were also tested. The test results show that the prepared conductive fibres have excellent conductivity and stability, and have potential applications in flexible electronic devices and sensing fields.

The combined impact of xylo-oligosaccharides and gamma-irradiated astragalus polysaccharides on the immune response, antioxidant capacity and intestinal microbiota composition of broilers

The present study investigated the individual and combined effects of xylo-oligosaccharides (XOS) and gamma-irradiated astragalus polysaccharides (IAPS) on the immune response, antioxidant capacity and intestinal microbiota composition of broiler chickens. A total of 240 newly hatched Ross 308 chicks were randomly allocated into 5 dietary treatments including the basal diet (control), or the basal diet supplemented with 50 mg/kg chlortetracycline (CTC), 100 mg/kg XOS (XOS), 600 mg/kg IAPS (IAPS), and 100 mg/kg XOS + 600 mg/kg IAPS (XOS + IAPS) respectively. The results showed that birds in the control group had lower the thymus index and serum lysozyme activity than those in the other 4 groups (P < 0.05). Moreover, there was an interaction between XOS and IAPS treatments on increasing the serum lysozyme activity (P < 0.05). Birds in the CTC and XOS + IAPS groups had lower serum malondialdehyde concentration and higher serum total antioxidant capacity activity and mucosal interleukin 2 mRNA expression of jejunum than those in the control group (P < 0.05). In addition, birds in the control groups had lower duodenal and jejunal IgA-producing cells number than these in other 4 groups (P < 0.05). As compared with the CTC group, dietary individual XOS or IAPS administration increased duodenal IgA-producing cells number (P < 0.05). Meanwhile, there was an interaction between XOS and IAPS treatments on increasing duodenal and jejunal IgA-Producing cells numbers (P < 0.05). Dietary CTC administration increased the proportion of Bacteroides, and decreased the proportion of Negativibacillus (P < 0.05). However, dietary XOS + IAPS administration increased Firmicutes to Bacteroidetes ratio, the proportion of Ruminococcaceae, as well as decreased the proportion of Barnesiella and Negativibacillus (P < 0.05). In conclusion, the XOS and IAPS combination could improve intestinal mucosal immunity and barrier function of broilers by enhancing cytokine gene expression, IgA-producing cell production and modulates cecal microbiota, and the combination effect of XOS and IAPS is better than that of individual effect of CTC, XOS, or IAPS in the current study.

Preparation of biomimetic non-iridescent structural color based on polystyrene-polycaffeic acid core-shell nanospheres

Caffeic acid (CA), as a natural plant-derived polyphenol, has been widely used in surface coating technology in recent years due to its excellent properties. In this work, caffeic acid was introduced into the preparation of photonic band gap materials. By controlling the variables, a reasonable preparation method of polystyrene (PS) @polycaffeic (PCA)–Cu(ii) core–shell microspheres was achieved: 1 mmol L⁻¹ cupric chloride anhydrous (CuCl₂), 3 mmol L⁻¹ sodium perborate tetrahydrate (NaBO₃·4H₂O), 2 mmol L⁻¹ CA and 2 g L⁻¹ polystyrene (PS) were reacted at 50 °C for 10 min to prepare PS@PCA–Cu(ii) core–shell microspheres through rapid oxidative polymerization of CA coated PS of different particle diameters. The amorphous photonic crystal structure was self-assembled through thermal assisted-gravity sedimentation, resulting in structural color nanomaterials with soft and uniform color, no angle dependence, stable mechanical fastness and excellent UV resistance.

Caffeic acid (CA), as a natural plant-derived polyphenol, has been widely used in surface coating technology in recent years due to its excellent properties.

Study on the mechanism of laccase-catalyzed polydopamine rapid dyeing and modification of silk

Research on the polymerization of dopamine and its modification on the surface of materials has received extensive attention. In this work, the process of laccase catalyzing the rapid polymerization of dopamine and in situ dyeing of silk fabric were studied. The results showed that laccase catalyzed dyeing for 3 h under acidic conditions could achieve the dyeing effect of 24 h under an alkaline environment, and the enzyme catalyzed polydopamine showed better deposition uniformity on the substrate surface. According to molecular simulation analysis, dopamine oligomers were easily combined with the amorphous regions of silk fibroin, and dopamine oligomers and amino acids of silk fibroin could form hydrogen bonds and π–π stacking interactions. Dopamine oligomers could form intermolecular and intramolecular hydrogen bonds through amino groups and hydroxyl groups. In addition, dopamine oligomers would aggregate in the process of binding to silk fibroin and adsorbed to the surface of silk fibroin in the form of aggregates, and Michael addition reaction would also occur between dopamine oligomers and silk fibroin. Finally, the silk fabrics loaded with polydopamine were reacted with different kinds of metal salt solutions to form particles with different morphologies and crystal structures on the surface of the silk fibers, and the modified silk fabrics showed good hydrophobicity.

Dopamine oligomers are easily combined with amorphous regions of silk fibroin, they can form hydrogen bonds and π–π stacking interactions, and undergo Michael addition reactions. The oligomers will aggregate in the process.

Fabrication of flexible conductive silk fibroin/polythiophene membrane and its properties

Silk fibroin (SF) film is an insulating material, which can be combined with polythiophene derivatives with electrical conductivity to obtain a flexible conductive material. In this work, poly(3,4-ethylenedioxythiophene) (PEDOT) was used to graft a silk protein film. The hydroxyl radical is formed by activation and oxidation of the silk protein film polymerized with the PEDOT radical formed by oxidation of 3,4-ethylenedioxythiophene to obtain a conductive silk film. The SF/PEDOT film, when tested, showed excellent electrical conductivity with resistance up to 63 Ω·cm−2, good flexibility, mechanical properties, fastness, and biocompatibility.

Creatine nitrate supplementation strengthens energy status and delays glycolysis of broiler muscle via inhibition of LKB1/AMPK pathway

This study aimed to evaluate the effects of dietary creatine nitrate (CrN) on growth performance, meat quality, energy status, glycolysis, and related gene expression of liver kinase B1/AMP-activated protein kinase (LKB1/AMPK) pathway in Pectoralis major (PM) muscle of broilers. A total of 240 male Arbor Acres broilers (28-day-old) were randomly allocated to one of 5 dietary treatments: the basal diet (control group), and the basal diets supplemented with 600 mg/kg guanidinoacetic acid (GAA), 300, 600, or 900 mg/kg CrN (identified as GAA₆₀₀, CrN₃₀₀, CrN₆₀₀, or CrN₉₀₀, respectively). We found that dietary GAA and CrN supplementation for 14 d from d 28 to 42 did not affect broiler growth performance, carcass traits, and textural characteristics of breast muscle. GAA₆₀₀, CrN₆₀₀, and CrN₉₀₀ treatments increased pH_24h and decreased drip loss of PM muscle compared with the control (P < 0.05). The PM muscles of CrN₆₀₀ and CrN₉₀₀ groups showed higher glycogen concentration and lower lactic acid concentration accompanied by lower activities of phosphofructokinase (PFK), pyruvate kinase (PK), and lactate dehydrogenase (LDH) (P < 0.05). Simultaneously, GAA₆₀₀ and all CrN treatments increased concentration of muscle creatine, phosphocreatine (PCr) and ATP, and decreased AMP concentration and AMP/ATP ratio (P < 0.05). Meanwhile, the concentrations of muscle creatine, PCr, and ATP were increased linearly, while muscle AMP concentration and AMP/ATP ratio were decreased linearly and quadratic as the dose of CrN increased (P < 0.05). GAA₆₀₀, CrN₆₀₀, and CrN₉₀₀ treatments upregulated mRNA expression of CreaT in PM muscle, and CrN₆₀₀ and CrN₉₀₀ treatments downregulated GAMT expression in liver and PM muscle compared with the control or GAA₆₀₀ groups (P < 0.05). The mRNA expression of muscle LKB1, AMPKα1, and AMPKα2 was downregulated linearly in response to the increasing CrN level (P < 0.05). Overall, CrN showed better efficacy on strengthening muscle energy status and improve meat quality than GAA at the some dose. These results indicate that CrN may be a potential replacement for GAA as a new creatine supplement.

Facile fabrication of superhydrophobic polyester fabric based on rapid oxidation polymerization of dopamine for oil-water separation

Through the special chemical structure of dopamine (DA), superhydrophobic polyester (PET) fabric was fabricated by introducing the low surface energy substance hexadecyltrimethoxysilane (HDS) into the PET fabric and chelating Fe ions with phenolic hydroxyl groups of polydopamine (PDA) to form a rough surface. The water contact angle (WCA) of the prepared PDA/Fe/HDS PET fabric was higher than 160° and the scrolling angle (SA) was lower than 2.09°. The excellent adhesion property of polydopamine (PDA) on the substrate is helpful to improve the stability of superhydrophobic PDA/Fe/HDS PET fabric. The tests results showed that the modified PET fabric maintains excellent mechanical properties. Its superhydrophobic property had good stability and durability in the harsh environment of washing, mechanical friction, UV irradiation, seawater immersion, acid–base and organic reagents erosion. The PDA/Fe/HDS PET fabric also had good self-cleaning and oil–water separation properties. It still had good oil–water separation performance after repeated use for 25 times, and the separation efficiency was more than 95%. The preparation method was facile, the treatment time can be shortened, the cost of the modified substrate was low, and fluorine-free substances were used in the process. This work provides a new way to expand the added value of PET fabrics and develop durable superhydrophobic fabrics in practical application.

Through the special chemical structure of dopamine, superhydrophobic polyester fabric was fabricated by introducing the low surface energy substance hexadecyltrimethoxysilane into the PET fabric and chelating Fe ions to form rough surface.

Preparation of superhydrophobic nylon-56/cotton-interwoven fabric with dopamine-assisted use of thiol-ene click chemistry

With the help of dopamine, we constructed a hydroxyl-rich secondary reaction platform on a surface formed by interwoven nylon 56 and cotton fibres. Octadecyl mercaptan and vinyl trimethoxysilane (VTMS) are used for the click coupling preparation of superhydrophobic reagents, which are grafted onto polydopamine aggregates and successfully used to prepare superhydrophobic nylon 56/cotton-interwoven fabric. The static contact angle was 161° and the sliding angle was 8°. Note that the prepared superhydrophobic fabric can withstand corrosive liquids, water washing, ultraviolet radiation and mechanical abrasion, it has excellent superhydrophobic stability, and self-cleaning and oil–water-separation functionalities. This simple, fast and environmentally friendly method can be applied to other substrates and shows tremendous potential for expanding the field of superhydrophobic applications.

Preparation process of superhydrophobic textiles.

Durable superhydrophobic cotton fabrics prepared by surface-initiated electrochemically mediated ATRP of polyhedral vinylsilsesquioxane and subsequent fluorination via thiol-Michael addition reaction

Fluorinated polyhedral oligomeric silsesquioxane (F-POSS) is one of the most popular candidates at present for superhydrophobic coating. Because of its ultralow surface energy, F-POSS has usually been dissolved with expensive fluoro-solvents, and the melting temperature of F-POSS is not high (122-140 °C), which will cause its loss during use. So trying to polymerize/crosslink F-POSS molecules and/or directly graft F-POSS to substrate is important. In this work, we report the SI-eATRP grafting of methacryl POSS (MA-POSS) on cotton and the subsequent amine catalyzed thiol-methacrylate Michael addition reaction of poly(MA-POSS) with 1H, 1H, 2H, 2H-perfluorododecyl-1-thiol (PFDT) for the fabrication of a durable poly(MA-POSS)-PFDT coating. The cotton fabric coated with poly(MA-POSS) was nearly superhydrophobic after 4 h of SI-eATRP process under potentiostatic condition of -0.40 V. Although the water contact angle (WCA) was ~148°, water droplets tended to adhere to the cotton fabric surface even when the fabric was turned upside down. After fluorination, WCA was increased to ~160°, and water drops could slide off when the fabric was slightly tilted. The sliding angle (SA) was ~10°. The as-prepared poly(MA-POSS)-PFDT coating was durable against repeated washing and physical abrasion. After 30 accelerated washing cycles (equals to 150 home laundering cycles), the coated fabric still showed superhydrophobicity. After 800 abrasion cycles over sandpaper, the WCA was still as high as 149°. In addition, the coated fabric had self-healing ability and could restore its superhydrophobicity after plasma etching through heat treatment. After 10 cycles of plasma etching and heat-induced healing process, the WCA of the coated fabric kept at ~154°. Such a durable superhydrophobic fabric coating may find applications in the development of functional clothing for a variety of purposes.

Degradation of textile dyes from aqueous solution using tea-polyphenol/Fe loaded waste silk fabrics as Fenton-like catalysts

In this study, waste silk fabrics (SF) were modified with tea-polyphenols (TPs) and then iron (Fe²⁺). The modified silk fabrics (TP-SF/Fe) were characterized via Fourier-transform infrared (FTIR), energy dispersive spectroscopy (EDS), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS) analysis. TP-SF/Fe was used in the Fenton-like removal of dyes (methylene blue, reactive orange GRN, and cationic violet X-5BLN) from aqueous solutions with catalyst-like activity. The effects of different catalyst samples, contact time, H₂O₂ concentration, initial dye concentration, and pH values on dye removal were investigated. The results showed that the dye removal percentages with the TP-SF/Fe-H₂O₂ sample reached 98%, 97%, and 95% in 5–40 min for methylene blue, reactive orange GRN, and cationic violet X-5BLN, respectively. Different thermodynamic and kinetic models were used to check the best fit of the adsorption data. The results indicated that the Freundlich isotherm and pseudo first-order kinetics models were the best fits. Moreover, it was also proved that TP-SF/Fe would be quite an effective and economical adsorbent for the treatment of textile dye wastewater. This work provides the basis for waste silk application in the removal of dyes from wastewater.

In this study, waste silk fabrics were modified with tea-polyphenols then loaded with Fe²⁺ for degradation of dyes.

The combined impact of xylo-oligosaccharides and gamma-irradiated Astragalus polysaccharides on growth performance and intestinal mucosal barrier function of broilers

This study was conducted to investigate the individual and combined effects of xylo-oligosaccharides (XOS) and gamma-irradiated Astragalus polysaccharides (IAPS) on the growth performance and intestinal mucosal barrier function of broiler chickens. A total of 240 1-day-old Ross-308 chicks were allocated into 5 groups for 21 d: control group (basal diet), antibiotic growth promoter (AGP) group (basal diet supplemented with 50 mg/kg chlortetracycline), XOS group (basal diet supplemented with 100 mg/kg XOS), IAPS group (basal diet supplemented with 600 mg/kg IAPS), and XOS + IAPS group (basal diet supplemented with 100 mg/kg XOS and 600 mg/kg IAPS). The results showed that birds in the XOS + IAPS group showed higher ADG and lower feed-to-gain ratio than those in the control group (P < 0.05). The XOS, IAPS, and XOS + IASP treatments significantly increased villus height (VH) of all intestine segments, jejunal goblet cell numbers, and VH–to–crypt depth ratio (VH/CD) of broilers than those of the control group (P < 0.05). Birds in the XOS + IAPS group had higher jejunal VH/CD ratio and goblet cell numbers than those from the XOS or IAPS groups (P < 0.05). In addition, there was a synergy effect between XOS and IAPS on increasing duodenal goblet cell numbers and improving ileal morphology (higher VH and VH/CD ratio) (P < 0.05). The XOS, IAPS and XOS + IAPS treatments increased the mRNA expression of zonula occludens-1 and occludin of the jejunum as compared with the control group (P < 0.05). Simultaneously, birds in the XOS + IAPS group showed lower plasma D-lactic acid concentration and higher mRNA expression of claudin-1, claudin-3, and occludin in the jejunum than those in the control or IAPS groups (P < 0.05). Moreover, there was no significant difference in growth performance, intestinal morphology, and intestinal barrier function of broilers between the AGP and XOS + IAPS groups. In conclusion, the combination of XOS and IAPS had a better potential as chlortetracycline substitute for improving the growth performance, intestinal morphology, and intestinal barrier function of broilers.

Effect of Polyol Molecular Structure on Fluidity, Surface Tension, and Printed Pattern Sharpness of Disperse Dye Inks

In the present study, density functional theory (DFT) has been used in simulating and calculating the molecular geometries of differently structured polyols (within a water phase), as well as the weak interactions between these polyols and the water molecules. Furthermore, low field nuclear magnetic resonance (LF-NMR) has been used in studying the transverse relaxation times of different polyols, in addition to their (20.00 wt %) fluidity in an aqueous environment. Moreover, the influence of polyols, with different molecular structures, on the ink fluidity, was also explored. A bubble pressure tensiometer was also used to characterize the surface tension of the aqueous polyol (20.00 wt %) solution, the sodium dodecyl sulfate (SDS, 0.50 wt %) solution, and the ink. This was made to clarify the influence of polyol and SDS on the surface tension of ink. In addition, the particle size, zeta potential, pH value, viscosity, and rheological properties of the ink, were also investigated. The resulting data showed that polyols have certain effects on the particle size, stability, and viscosity of the ink. The jetting performances of different polyol inks were, under certain conditions of the inkjet drive waveform, also explored. The results showed that the fluidity, viscosity, and surface tension of the ink will render a certain influence on the inkjet performances. The prepared polyol ink was thereafter used for polyester fabric printing, and the contour sharpness and color fastness of the printed fabric were accordingly evaluated. The data showed that the increase in ink viscosity, and decrease in fluidity, promote the improvement in contour sharpness. In addition, the printed fabric demonstrated an excellent color fastness.

The stability of disperse red/reactive-red dye inks

CI disperse red 896 was used as a representative disperse red dye to investigate the stability of inkjet printing colour paste. Various additives were added to the dye in different mass fractions to study the thermal stability and freeze–thaw stability of the ink in terms of average particle size, viscosity, and surface tension. The centrifugal stability of the colour paste and ink was characterised by their specific absorbance. When grinding the colour paste, use of a defoamer can improve the grinding efficiency, without affecting the stability of the paste. The most stable ink prepared from the colour paste contained 20–35 wt% paste. Ethylene glycol and glycerol were combined and their amounts controlled respectively at 6–14 wt%. The triethanolamine content was <1 wt% when the fatty alcohol polyoxyethylene ether content was 0.2 wt%. The sodium dodecyl sulphate content should be less than 0.15 wt%, and that of polyvinylpyrrolidone-K30 should be <0.7 wt%.

CI disperse red 896 was used as a representative disperse red dye to investigate the stability of inkjet printing colour paste.

Enhanced transforming growth factor-beta signaling and fibrosis in the pectoralis major muscle of broiler chickens affected by wooden breast myopathy

Fibrosis has also been recorded as a prominent pathological feature within wooden breast (WB) myopathy of broiler chickens. This study was conducted to evaluate the accumulation of fibril collagen, deposition of the extracellular matrix (ECM) components, and the underlying mechanism mediating the pathogenic fibrotic process in the pectoralis major (PM) muscle of WB-affected birds. Broiler chickens were categorized into the control and WB groups based on the evaluation of myopathic lesions. Results indicated that the total content and area of collagen in cross-sections of the PM muscle, as well as the augmented expression of collagen-I and fibronectin in the ECM, were greatly increased in birds with WB. Wooden breast myopathy upregulated expressions of transforming growth factor-beta (TGF-β) and the phosphorylation of Smad 2 and 3, thereby activating TGF-β-mediated Smad signaling pathway, which further enhanced the transcription of profibrotic mediators. In addition, regulators involved in collagen biosynthesis and cross-linking including prolyl 4-hydroxylase, lysyl oxidase, lysyl hydroxylase, and decorin were increased in the WB muscle. Finally, the expressions of both matrix metalloproteinases (MMP) and tissue inhibitor of metalloproteinases (TIMP) were increased in the WB muscle, which might be related with reduced ECM remodeling. Overall, WB myopathy induces severe fibrosis by enhancing ECM deposition and collagen cross-linking in the PM muscle of broiler chickens, possibly via the activation of TGF-β signaling and the dysregulation of the MMP and TIMP system.

Microbiota populations and short-chain fatty acids production in cecum of immunosuppressed broilers consuming diets containing γ-irradiated Astragalus polysaccharides

This study was designed to evaluate the effects of γ-irradiated Astragalus polysaccharides (IAPS) on growth performance, cecal microbiota populations, and concentrations of cecal short-chain fatty acids of immunosuppressed broilers. A total of 144 one-day-old broiler chicks were randomly assigned into 3 groups: nontreated group (control), cyclophosphamide (CPM)-treated groups fed either a basal diet or the diets containing 900 mg/kg IAPS, respectively. On day 16, 18, and 20, broilers in the control group were intramuscularly injected with 0.5 mL sterilized saline (0.75%, wt/vol), and those in the CPM and IAPS groups were intramuscularly injected with 0.5 mL CPM (40 mg/kg of BW). The trial lasted 21 d. Compared with the control group, CPM treatment decreased the broiler average daily gain (ADG) and feed intake (P < 0.05) but did not affect the overall microbial diversity and compositions, as well as the concentrations of cecal acetate, propionate, and butyrate in cecum of broilers (P > 0.05). Dietary IAPS supplementation increased broiler ADG, Shannon index, and decreased Simpson index (P < 0.05). Specifically, broilers fed diets containing IAPS showed lower abundances of Faecalibacterium, Bacteroides, and Butyricicoccus and higher proportions of Ruminococcaceae UCG-014, Negativibacillus, Shuttleworthia, Sellimonas, and Mollicutes RF39_norank, respectively (P < 0.05). The IAPS treatment also increased butyrate concentration (P < 0.05) and tended to elevate acetate concentration (P = 0.052) in cecal digesta. The results indicated that IAPS are effective in increasing the cecal beneficial bacteria and short-chain fatty acids production, contributing to improvement in the growth performance of immunosuppressive broilers. These findings may expand our knowledge about the function of modified Astragalus polysaccharides in broiler chickens.

Glucose and lipid metabolism of broiler chickens fed diets with graded levels of corn resistant starch

1. The aim of this study was to investigate the effects of graded levels of dietary corn resistant starch (RS) on glucose and lipid metabolism of broilers. 2. A total of 320 male broiler chicks (Arbor Acres, one-day-old) were randomly allocated to five dietary treatments, including a corn-soybean control diet, a corn-soybean based diet containing 20% corn starch, and three diets containing 4%, 8% and 12% RS by replacing corn starch with 6.67%, 13.33% and 20% Hi-Maize® 260 (identified as control, RS1, RS2, RS3 and RS4, respectively). Each treatment contained eight replicates with eight birds, and the experiment lasted 42 days. 3. Birds fed RS diets showed lower (P < 0.05) concentrations of serum low-density lipoprotein cholesterol and non-esterified fatty acid (NEFA) at d 21 and 42 of age, compared to the control. Lower (P < 0.05) hepatic apolipoprotein B concentration and citrate synthase (CS) activity, as well as a higher (P < 0.05) glycogen synthase (GS) concentration were observed in birds fed RS diets than those in the control group at d 21 of age. Consuming RS diets linearly increased (P < 0.01) serum glucose concentration, and linearly decreased (P < 0.01) NEFA concentrations in broilers at d 21 and 42 of age. Liver GS concentration and activities of hexokinase, pyruvate and CS were linearly increased (P < 0.01) in broilers at d 21 of age, but were linearly decreased (P < 0.05) in birds at d 42 of age in response to the increase of dietary RS levels. Feeding RS diets linearly decreased (P < 0.05) mRNA expressions of PC, PPARα and CPT-1 at d 21 of age and the mRNA expressions of SREBP-1 c, ChREBP, ACC and FAS at d 42 of age, and linearly increased (P < 0.05) the mRNA expressions of PEPCK, PC, LKB1, AMPKα1, PPARα, CPT-1 and L-FABP at d 42 of age. 4. Feeding broilers with diets containing higher concentration of RS promoted hepatic lipolysis and gluconeogenesis through activated AMPK signalling pathway and accelerated whole-body energy expenditures in the grower phase.

Dynamics and bifurcations in multistable 3-cell neural networks

We disclose the generality of the intrinsic mechanisms underlying multistability in reciprocally inhibitory 3-cell circuits composed of simplified, low-dimensional models of oscillatory neurons, as opposed to those of a detailed Hodgkin-Huxley type [Wojcik et al., PLoS One 9, e92918 (2014)]. The computational reduction to return maps for the phase-lags between neurons reveals a rich multiplicity of rhythmic patterns in such circuits. We perform a detailed bifurcation analysis to show how such rhythms can emerge, disappear, and gain or lose stability, as the parameters of the individual cells and the synapses are varied.

Protective effects of γ-irradiated Astragalus polysaccharides on intestinal development and mucosal immune function of immunosuppressed broilers

This study was aimed to assess the protective effects of γ-irradiated Astragalus polysaccharides (IAPS) on the development of small intestine and intestinal mucosal immunity of immunosuppressed broilers induced by cyclophosphamide (CPM). A total of 384 one-day-old broiler chicks with similar initial weight were randomly assigned into 6 groups: non-treated group (control), and CPM-treated groups fed either a basal diet or the diets containing 900 mg/kg APS, or 900, 600, 300 mg/kg IAPS, respectively. On days 16, 18, and 20, all broilers except for control group were intramuscularly injected with 0.5 mL CPM (40 mg/kg of BW). Broilers in the control group were intramuscularly injected with 0.5 mL sterilized saline (0.75%, wt/vol). This trial was lasted for 21 d. The results revealed that both APS and IAPS treatment elevated the duodenal IgA-producing cells number and the jejunal mRNA expression of interleukin-2 (IL-2), interleukin-10 (IL-10), and interferon γ of CPM-injected broilers (P < 0.05). The decreased jejunal villus height (VH), the ratio of VH to crypt depth (V/C), as well as the intestinal intraepithelial lymphocytes (IELs) and goblet cells number in CPM-injected broilers were elevated by dietary supplementation with 900 mg/kg APS or 900, 600 mg/kg IAPS (P < 0.05). The CPM-induced decrease in jejunum index, the duodenal VH and the jejunal IgA-producing cells number were only improved in the 900 mg/kg IAPS group (P < 0.05). Furthermore, the number of IELs and IgA-producing cells in duodenum, VH, V/C, the number of goblet cells, and mRNA expression of IL-2 and IL-10 in jejunum were higher in the 900 mg/kg IAPS group than those in the 900 mg/kg APS group (P < 0.05). In summary, IAPS possessed stronger immunomodulatory effect than APS at the same supplementation level. Therefore, gamma irradiation can be used as an alternative treatment to enhance the immunomodulatory activity of APS.

Characteristics and incidence of broiler chicken wooden breast meat under commercial conditions in China

Wooden breast (WB) has emerged as a dramatically increasing myopathy in the poultry industry over the past few years. The objective of this study was to investigate the incidence of WB in a Chinese commercial broiler processing plant, and the consequences on quality attributes, textural properties, and sensory traits. A total of 1,135 breast fillets were collected at the deboning line and assigned to normal, mild, moderate, and severe WB categories by tactile evaluation. The proportion affected by WB was approximately 61.9%. WB fillets appeared heavier and thicker than normal fillets. The degree of WB myopathy was highly correlated with fillet weight and thickness. The meat quality characteristics of cooking loss and purge loss increased along with increasing severity of WB myopathy. Compression tests of raw meat revealed higher cutting strength and shear values for WB. In cooked meat, only severe WB fillets exhibited elevated hardness and chewiness. Finally, moderate and severe WB fillets affected the sensory evaluation by consumers owing to their impaired general appearance, texture, and drip loss. The results suggested that a high proportion of WB broiler fillets would cause detrimental losses to the poultry meat retailing and processing industry.

Growth performance, carcass traits and digestive function of broiler chickens fed diets with graded levels of corn resistant starch

1. This study was conducted to assess the effects of graded levels of dietary corn resistant starch (RS) on growth performance, carcass traits, nutrient retention, digestive organ index, intestinal morphology, digestive enzyme activities, and mRNA expression of certain nutrient transporters in broiler chickens.2. A total of 320, 1-d-old Arbor Acres broiler chickens were randomly assigned to five dietary treatments, with eight replicates of eight birds in each. These treatments included one corn-soybean control diet, a corn-soybean based diet containing 20% corn starch, and three diets supplemented with 4%, 8% and 12% RS by replacing corn starch with 6.67%, 13.33% and 20% of Hi-Maize 260® (identified as control, RS1, RS2, RS3 and RS4, respectively). The feeding period lasted 42 days.3. Performance parameters including feed consumption, feed conversion, body weight gain and percentage of abdominal fat at d 42 of age, nutrient retention (including dry matter, fat, total starch and nitrogen free extract), and apparent metabolisable energy was measured from d 18 to 20 and d 39 to 41 and showed negative linear responses to increasing dietary RS level (P < 0.05). Birds fed the RS3 and RS4 diets showed higher relative weight of duodenum, jejunum and ileum, as well as lower villus height and villus height/crypt depth compared to the control (P < 0.05). The activity of pancreatic trypsin of birds at d 21 and 42 of age decreased linearly in response to the increase of dietary RS level (P < 0.01). There were linear changes in up-regulated mRNA expression of SGLT-1 and down-regulated mRNA expression of GLUT-2 with increasing proportion of RS at d 21 and 42 of age (P < 0.05), respectively.4. It was concluded that feeding broilers with diets containing higher concentrations of RS impaired the development of small intestine, which resulted in lower apparent total tract retention of nutrients and poorer body weight gain, feed efficiency and carcass traits of broiler chickens.

Dietary taurine supplementation enhances antioxidative capacity and improves breast meat quality of broiler chickens

1. The aim of this study was to determine the effect of dietary taurine supplementation on growth performance, meat quality and antioxidant responses in breast muscle of broiler chickens.2. A total of 72 Arbor Acres broiler chickens (28-day-old) with similar body weight were randomly allocated into two groups, and fed either 0 g/kg (control; C) or 5 g/kg taurine-supplemented diets (TS) for 14 days.3. The results showed that TS had no effect on growth performance or chemical composition of breast muscle in broilers. The drip and cooking losses were significantly decreased (P < 0.05), and the pH_24h of breast muscle were increased (P < 0.05) in the TS group. Meanwhile, broilers in the TS group exhibited significantly higher (P < 0.05) scavenging activities of superoxide and 2,2-diphenyl-1-picrylhydrazyl radicals, and lower (P < 0.05) contents of carbonyl, malondialdehyde, and 4-hydroxynonenal. TS increased (P < 0.05) total antioxidant capacity and superoxide dismutase activities. Moreover, TS significantly upregulated (P < 0.05) the mRNA expressions of nuclear factor erythroid 2-related factor 2 (Nrf2), heme oxygenase 1, NAD(P)H quinone dehydrogenase 1, superoxide dismutase, catalase, and glutathione peroxidase.4. These findings suggested that TS enhanced antioxidative capacity and improved breast meat quality of broilers via activating the Nrf2 pathway.

Fabrication of Silk Fibroin/Graphene Film with High Electrical Conductivity and Humidity Sensitivity

Silk fibroin (SF) is a natural material with good biocompatibility and excellent mechanical properties, which are complementary to graphene with ultrahigh electrical conductivity. In this study, to maximally combine graphene and silk fibroin, a well-dispersed silk fibroin/graphene suspension was successfully prepared in a simple and effective way. Then we prepared a flexible conductive SF/graphene film with a minimum resistance of 72.1 ± 4.7 Ω/sq by the casting method. It was found that the electrical conductivity of the SF/graphene film was related to the water content of the film, and the variation was more than 200 times. Therefore, it will play an important role in the field of humidity sensors. It also has excellent mechanical properties in both wet and dry states. These unique features make this material a promising future in the fields of biomedical applications, wearable sensors, and implantable internal sensors.

Durable Antipilling Modification of Cotton Fabric with Chloropyrimidine Compounds

Cotton fabric, a natural cellulose material, is widely used in the textile industry for its excellent properties. However, its application in some fields are seriously restricted because of its poor antipilling behavior. In this study, cotton fabrics were modified with 2,4,6-trichloropyrimidine (TLP), 2,4-dichloro-5-methoxypyrimidine (DMP), and 2-amino-4,6-dichloropyridine (ADP). The surface morphology and chemical structure of the modified cotton fabric were characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). Furthermore, the antipilling behavior, dyeing properties, thermal properties, and mechanical properties of modified cotton fabric were evaluated. The results showed that chloropyrimidine compounds were successfully grafted onto the surface of the cotton fabric, leading to excellent and durable antipilling activity of grade 3-4 even after 10 washes. Moreover, compared with control cotton fabric, the heat release rate (HRR) and total heat release (THR) of TLP-modified cotton fabric decreased to 173.2 W/g (42.3% reduction) and 11.3 KJ/g (13.7% reduction), respectively. In addition, the increased K/S value of modified cotton fabrics dyed with reactive dyes indicated that the modification can enhance the dyability of cotton fabric. This technique provides a simple and versatile method for improving the antipilling behavior of cellulosic materials and supports further preparation of functional textiles.

Preparation of disperse inks for direct inkjet printing of non-pretreated polyester fabrics

The preparation of disperse inks for direct inkjet printing was carried out using disperse dye, dispersant (TD-1109, hydrophilic polyacrylic acid block copolymer), wetting agent (diethylene glycol and ethylene glycol), water-based polymers (polyvinyl alcohol (PVA) or waterborne polyester), deionized water, etc. The suitability of disperse inks for polyester fabrics was assessed via measurement of conductivity, pH, particle size surface tension and viscosity. The theological behavior of disperse inks was evaluated by rotational viscometry; the disperse inks had the characteristics of a Newtonian fluid. The inkjet printability of disperse inks was investigated by monitoring droplet formation dynamics, where the viscosity and surface tension of disperse ink were 2.78 mPa s and 33.28 mN m⁻¹, respectively. The disperse ink has excellent ejection performance. The printing accuracy of disperse inks was evaluated by inkjet printing quality of lines on untreated polyester fabrics. The fastness properties of printed polyester fabrics were also evaluated and they presented excellent color fastness. Compared with different printed polyester fabrics, the polyester fabrics printed with disperse ink made from water-based polymers have high color strength (K/S) and saturation (C*) values.

The preparation of disperse inks for direct inkjet printing was carried out using disperse dye, dispersant (TD-1109, hydrophilic polyacrylic acid block copolymer), wetting agent (DEG and EG), water-based polymers (PVA or waterborne polyester), deionized water, etc.

Synergistic Effects and Mechanism of Modified Silica Sol Flame Retardant Systems on Silk Fabric

The nano-silica sol was prepared by sol-gel method, and the boric acid, urea, cyanoguanidine, melamine cyanurate (MCA), 1-hydroxyethane 1,1-diphosphonic acid (HEDP), and 6H-dibenz (C,E) (1,2) oxaphosphorin-6-oxide (DOPO) were added to the silica sol to modify the flame retardant through physical doping and chemical bonding. According to the formula proposed by Lewin, the calculation of flammability parameters were obtained by the limiting oxygen index meter, the micro calorimeter, the vertical burner, and the thermogravimetric analyzer proved that there was a synergistic or additive effect between the B/N/P flame retardant and the silica sol. Fourier transform infrared (FT-IR) spectrum, scanning electron microscopy, and pyrolysis gas chromatography-mass spectrometry were used to characterize the morphology, structure, and pyrolysis products of treated silk fabric and residues after combustion. The results show that the flame retardancy of silica-boron sol is mainly caused by endothermic reaction and melt covering reaction. Silicon-nitrogen sol acts as a flame retardant through endothermic reaction, release of gases, and melting coverage. Silicon-phosphorus sol achieves flame retardancy by forming an acid to promote formation of a carbon layer and melting coverage. Silica sol and other flame retardants show excellent flame retardanty after compounding, and have certain complementarity, which can balance the dosage, performance, and cost of flame retardants, and is more suitable for industrial development.

Dopamine-Dyed and Functionally Finished Silk with Rapid Oxidation Polymerization

Nowadays, more and more attention has been paid to ecological environment problems, and the dyeing and finishing field is no exception. Environmentally friendly dyeing and finishing methods have been extensively studied. Inspired by the bioadhesive force of marine mussels, dopamine (DA) was applied as a dyestuff and investigated in textile dyeing. In this work, dopamine was dyed on silk with a rapid oxidation polymerization in the presence of metal ions (Fe3+) and sodium perborate oxidant (Ox). The polydopamine (PDA) was rapidly deposited on silk fabric and the dyeing process was optimized as follows: the concentration of DA was 2 g·L-1, and that of Fe3+ was 2 mmol·L-1; the total reaction time was 50 min and reacted at 50 °C; 9 mmol·L-1 Ox was added at 20 min. The K/S value of the treated silk fabric reached 11.46. The color fastness of dyed fabric to light fastness reached Level 4. The SEM and AFM tests showed that the particles attached to the fabric surface and increased the roughness. The XPS test further proved that polydopamine (PDA) was deposited on the fabric. The treated fabric also had a good anti-UV property with a UPF >30 and UVA <4%. The water contact angle of treated fabric attained 142.6°, showing better hydrophobicity, and the weft breaking strength was also improved. This environmentally friendly dyeing and finishing method can be applied and extended to other fabrics.

Preparation, Structure, and Properties of Silk Fabric Grafted with 2-Hydroxypropyl Methacrylate Using the HRP Biocatalyzed ATRP Method

Atom transfer radical polymerization (ATRP) is a “living”/controlled radical polymerization, which is also used for surface grafting of various materials including textiles. However, the commonly used metal complex catalyst, CuBr, is mildly toxic and results in unwanted color for textiles. In order to replace the transition metal catalyst of surface-initiated ATRP, the possibility of HRP biocatalyst was investigated in this work. 2-hydroxypropyl methacrylate (HPMA) was grafted onto the surface of silk fabric using the horseradish peroxidase (HRP) biocatalyzed ATRP method, which is used to improve the crease resistance of silk fabric. The structure of grafted silk fabric was characterized by Fourier transform infrared spectrum, X-ray photoelectron spectroscopy, thermogravimetic analysis, and scanning electron microscopy. The results showed that HPMA was successfully grafted onto silk fabric. Compared with the control silk sample, the wrinkle recovery property of grafted silk fabric was greatly improved, especially the wet crease recovery property. However, the whiteness, breaking strength, and moisture regain of grafted silk fabric decreased somewhat. The present work provides a novel, biocatalyzed, environmentally friendly ATRP method to obtain functional silk fabric, which is favorable for clothing application and has potential for medical materials.

Silk Fibroin/Polyvinyl Pyrrolidone Interpenetrating Polymer Network Hydrogels

Silk fibroin hydrogel is an ideal model as biomaterial matrix due to its excellent biocompatibility and used in the field of medical polymer materials. Nevertheless, native fibroin hydrogels show poor transparency and resilience. To settle these drawbacks, an interpenetrating network (IPN) of hydrogels are synthesized with changing ratios of silk fibroin/N-Vinyl-2-pyrrolidonemixtures that crosslink by H₂O₂ and horseradish peroxidase. Interpenetrating polymer network structure can shorten the gel time and the pure fibroin solution gel time for more than a week. This is mainly due to conformation from the random coil to the β-sheet structure changes of fibroin. Moreover, the light transmittance of IPN hydrogel can be as high as more than 97% and maintain a level of 90% within a week. The hydrogel, which mainly consists of random coil, the apertures inside can be up to 200 μm. Elastic modulus increases during the process of gelation. The gel has nearly 95% resilience under the compression of 70% eventually, which is much higher than native fibroin gel. The results suggest that the present IPN hydrogels have excellent mechanical properties and excellent transparency.

Different oxidative status and expression of calcium channel components in stress-induced dysfunctional chicken muscle

The objective of this study was to assess the effects of transport stress at high ambient temperatures on the oxidation status and the expression of essential elements responsible for the Ca transport (sarco- (endo-) plasmic reticulum Ca-ATPase (SERCA1) and the ryanodine receptor (RyR) in (PM) muscles of broilers. Briefly, Arbor Acres broiler chickens ( = 112) were randomly categorized into 2 treatments: unstressed control (C) and 0.5 h transport (T). Each treatment consisted of 8 replicates of 7 birds each. Birds were transported according to a designed protocol. PM muscle samples in T group were collected and classified as normal (T-NOR) or pale, soft, and exudative-like (T-PSE) using meat quality parameters. The results indicated that production of corticosterone (CORT) and reactive oxygen species (ROS) increased significantly after transportation ( < 0.05). Thiobarbituric acid reactive substance values and carbonyl contents increased significantly in the T group ( < 0.05). Moreover, the extent of lipid peroxidation and protein oxidation was more severe in the T-PSE group compared to the T-NOR group ( < 0.05). The mRNA and protein expression of SERCA1 and αRyR increased in the T-NOR group but decreased significantly in the T-PSE group compared to the CON group ( < 0.05). The mRNA expression of βRyR was found to be enhanced in the T-NOR group compared to the CON group, whereas there was no difference in the T-PSE group ( < 0.05). The results indicate that short-distance transport of broilers affects their physiological responses and biochemical changes which may lead to different oxidative states and, importantly, to different expressions of SERCA and RyR. These induced changes in abnormal sarcoplasmic Ca homeostasis have significant implications for the development of PSE-like meat.