Nanovoid Membranes Embedded with Hollow Zwitterionic Nanocapsules for a Superior Desalination Performance

In order to lower the capital and operational cost of desalination and wastewater treatment processes, nanofiltration (NF) membranes need to have a high water permeation and ionic rejection, while also maintaining a stable performance through antifouling resistance. Recently, Turing-type reaction conditions [ Science 2018, 360, 518-521] and sacrificed metal organic frame (MOF) nanoparticles [ Nat. Commun. 2018, 9, 2004] have been reported to introduce nanovoids into thin-film composite (TFC) polyamide (PA) NF membranes for an improved performance. Herein, we report a one-step fabrication of thin-film nanocomposite membranes (TFNM) with controllable nanovoids in the polyamide layer by introducing hollow zwitterionic nanocapsules (HZN_Cs) during interfacial polymerization. It was found that embedding HZN_Cs increases the membrane internal free volume, external surface area, and hydrophilicity, thus enhancing the water permeation and antifouling resistance without trading off the rejection of multivalent ions. For example, water permeation of the NF membranes embedded with about 19.0 wt % of HZN_Cs (73 L m^-2 h^-1) increased by 70% relative to the value of the control TFC NF membrane without HZN_Cs (43 L m^-2 h^-1). This increase comes while also maintaining 95% rejection of Na₂SO₄. Further, we also determined the effect of the mass loading of HZN_Cs on the top surface of the TFC NF membranes on the membrane performance. This work provided a direct and simple route to fabricate advanced desalination membranes with a superior separation performance.

Oxygen sensitive polymeric nanocapsules for optical dissolved oxygen sensors

Immobilization of the oxygen-sensitive probes (OSPs) in the host matrix greatly impacts the performance and long-term usage of the optical dissolved oxygen (DO) sensors. In this work, fluorescent dyes, as the OSPs, were encapsulated with a crosslinked fluorinated polymer shell by interfacial confined reversible addition fragmentation chain transfer miniemulsion polymerization to fabricate oxygen sensitive polymeric nanocapsules (NCs). The location of fluorescent dyes and the fluorescent properties of the NCs were fully characterized by fourier transform infrared spectrometer, x-ray photoelectron spectrometer and fluorescent spectrum. Dye-encapsulated capacity can be precisely tuned from 0 to 1.3 wt% without self-quenching of the fluorescent dye. The crosslinked fluorinated polymer shell is not only extremely high gas permeability, but also prevents the fluorescent dyes from leakage in aqueous as well as in various organic solvents, such as ethanol, acetone and tetrahydrofuran (THF). An optical DO sensor based on the oxygen sensitive NCs was fabricated, showing high sensitivity, short response time, full reversibility, and long-term operational stability of online monitoring DO. The sensitivity of the optical DO sensor is 7.02 (the ratio of the response value in fully deoxygenated and saturated oxygenated water) in the range 0.96-14.16 mg l^-1 and the response time is about 14.3 s. The sensor's work curve was fit well using the modified Stern-Volmer equation by two-site model, and its response values are hardly affected by pH ranging from 2 to 12 and keep constant during continuous measurement for 3 months. It is believed that the oxygen sensitive polymeric NCs-based optical DO sensor could be particularly useful in long-term online DO monitoring in both aqueous and organic solvent systems.

Recent advances in RAFT-mediated surfactant-free emulsion polymerization

We summarized the RAFT-mediated surfactant-free emulsion polymerization using various RAFT agents and the polymerization types for the preparation of organic/inorganic hybrid materials.

Synthesis of amphiphilic copolymers based on acrylic acid, fluoroalkyl acrylates and n-butyl acrylate in organic, aqueous–organic, and aqueous media via RAFT polymerization

Hydrophilic and amphiphilic polymeric trithiocarbonates based on polyacrylic acid are able to provide polymerization-induced self-assembly in copolymerization of butyl and fluoroalkyl acrylates.

Living Radical Polymerization by the RAFT Process – A Third Update

This paper provides a third update to the review of reversible deactivation radical polymerization (RDRP) achieved with thiocarbonylthio compounds (ZC(=S)SR) by a mechanism of reversible addition-fragmentation chain transfer (RAFT) that was published in June 2005 (Aust. J. Chem. 2005, 58, 379). The first update was published in November 2006 (Aust. J. Chem. 2006, 59, 669) and the second in December 2009 (Aust. J. Chem. 2009, 62, 1402). This review cites over 700 publications that appeared during the period mid 2009 to early 2012 covering various aspects of RAFT polymerization which include reagent synthesis and properties, kinetics and mechanism of polymerization, novel polymer syntheses, and a diverse range of applications. This period has witnessed further significant developments, particularly in the areas of novel RAFT agents, techniques for end-group transformation, the production of micro/nanoparticles and modified surfaces, and biopolymer conjugates both for therapeutic and diagnostic applications.