Efficient Polymer-Polymer Conjugation via Thiol-ene Click Reaction

XPS Depth-Profiling Studies of Chlorophyll Binding to Poly(cysteine methacrylate) Scaffolds in Pigment-Polymer Antenna Complexes Using a Gas Cluster Ion Source

X-ray photoelectron spectroscopy (XPS) depth-profiling with an argon gas cluster ion source (GCIS) was used to characterize the spatial distribution of chlorophyll a (Chl) within a poly(cysteine methacrylate) (PCysMA) brush grown by surface-initiated atom-transfer radical polymerization (ATRP) from a planar surface. The organization of Chl is controlled by adjusting the brush grafting density and polymerization time. For dense brushes, the C, N, S elemental composition remains constant throughout the 36 nm brush layer until the underlying gold substrate is approached. However, for either reduced density brushes (mean thickness ∼20 nm) or mushrooms grown with reduced grafting densities (mean thickness 6-9 nm), elemental intensities decrease continuously throughout the brush layer, because photoelectrons are less strongly attenuated for such systems. For all brushes, the fraction of positively charged nitrogen atoms (N+/N0) decreases with increasing depth. Chl binding causes a marked reduction in N+/N0 within the brushes and produces a new feature at 398.1 eV in the N1s core-line spectrum assigned to tetrapyrrole ring nitrogen atoms coordinated to Zn2+. For all grafting densities, the N/S atomic ratio remains approximately constant as a function of brush depth, which indicates a uniform distribution of Chl throughout the brush layer. However, a larger fraction of repeat units bound to Chl is observed at lower grafting densities, reflecting a progressive reduction in steric congestion that enables more uniform distribution of the bulky Chl units throughout the brush layer. In summary, XPS depth-profiling using a GCIS is a powerful tool for characterization of these complex materials.

Click Chemistry: Reaction Rates and Their Suitability for Biomedical Applications

Click chemistry has become a commonly used synthetic method due to the simplicity, efficiency, and high selectivity of this class of chemical reactions. Since their initial discovery, further click chemistry methods have been identified and added to the toolbox of click chemistry reactions for biomedical applications. However, selecting the most suitable reaction for a specific application is often challenging, as multiple factors must be considered, including selectivity, reactivity, biocompatibility, and stability. Thus, this review provides an overview of the benefits and limitations of well-established click chemistry reactions with a particular focus on the importance of considering reaction rates, an often overlooked criterion with little available guidance. The importance of understanding each click chemistry reaction beyond simply the reaction speed is discussed comprehensively with reference to recent biomedical research which utilized click chemistry. This review aims to provide a practical resource for researchers to guide the selection of click chemistry classes for different biomedical applications.

Asymmetric Block Extension of Star-Shaped [PEG-SH]4 - toward Poly(dehydroalanine)-Functionalized PEG Hydrogels for Catch and Release of Charged Guest Molecules

With the incorporation of polyampholytic segments into soft matter, hydrogels can serve as a reservoir for a variety of charged molecules which can be caught and released upon changes in pH value. Asymmetric block extension of one arm for star-shaped poly(ethylene glycol) [PEG26 -SH]4 using short segments of polyampholytic poly(dehydroalanine) (PDha) is herein demonstrated while maintaining the functional thiol end groups for network formation. For subsequent hydrogel synthesis with up to 10 wt.% PDha a straightforward and biocompatible photoinitiated thiol-ene click reaction is exploited. The investigation of the swelling properties of the hydrogel revealed responsive behavior toward ionic strength and variations in pH value. Moreover, the reversible adsorption of the model dyes methylene blue (MB) and acid orange 7 (AO7) is investigated by UV-vis measurements and the procedure can be successfully transferred to the adsorption of the adhesion peptide RGDS resulting in an uptake of 1.5 wt% RGDS with regard to the dry weight of the hydrogel.

Elastomeric vitrimers from designer polyhydroxyalkanoates with recyclability and biodegradability

Cross-linked elastomers are stretchable materials that typically are not recyclable or biodegradable. Medium-chain-length polyhydroxyalkanoates (mcl-PHAs) are soft and ductile, making these bio-based polymers good candidates for biodegradable elastomers. Elasticity is commonly imparted by a cross-linked network structure, and covalent adaptable networks have emerged as a solution to prepare recyclable thermosets via triggered rearrangement of dynamic covalent bonds. Here, we develop biodegradable and recyclable elastomers by chemically installing the covalent adaptable network within biologically produced mcl-PHAs. Specifically, an engineered strain of Pseudomonas putida was used to produce mcl-PHAs containing pendent terminal alkenes as chemical handles for postfunctionalization. Thiol-ene chemistry was used to incorporate boronic ester (BE) cross-links, resulting in PHA-based vitrimers. mcl-PHAs cross-linked with BE at low density (<6 mole %) affords a soft, elastomeric material that demonstrates thermal reprocessability, biodegradability, and denetworking at end of life. The mechanical properties show potential for applications including adhesives and soft, biodegradable robotics and electronics.

Mechano-Activated Cell Therapy for Accelerated Diabetic Wound Healing

Chronic diabetic wounds are a significant global healthcare challenge. Current strategies, such as biomaterials, cell therapies, and medical devices, however, only target a few pathological features and have limited efficacy. A powerful platform technology combining magneto-responsive hydrogel, cells, and wireless magneto-induced dynamic mechanical stimulation (MDMS) is developed to accelerate diabetic wound healing. The hydrogel encapsulates U.S. Food and Drug Administration (FDA)-approved fibroblasts and keratinocytes to achieve ∼3-fold better wound closure in a diabetic mouse model. MDMS acts as a nongenetic mechano-rheostat to activate fibroblasts, resulting in ∼240% better proliferation, ∼220% more collagen deposition, and improved keratinocyte paracrine profiles via the Ras/MEK/ERK pathway to boost angiogenesis. The magneto-responsive property also enables on-demand insulin release for spatiotemporal glucose regulation through increasing network deformation and interstitial flow. By mining scRNAseq data, a mechanosensitive fibroblast subpopulation is identified that can be mechanically tuned for enhanced proliferation and collagen production, maximizing therapeutic impact. The "all-in-one" system addresses major pathological factors associated with diabetic wounds in a single platform, with potential applications for other challenging wound types.

Modulating pentenoate-functionalized hyaluronic acid hydrogel network properties for meniscal fibrochondrocyte mechanotransduction

Knee meniscus tears are one of the most common musculoskeletal injuries. While meniscus replacements using allografts or biomaterial-based scaffolds are available, these treatments rarely result in integrated, functional tissue. Understanding mechanotransducive signaling cues that promote a meniscal cell regenerative phenotype is critical to developing therapies that promote tissue regeneration rather than fibrosis after injury. The purpose of this study was to develop a hyaluronic acid (HA) hydrogel system with tunable crosslinked network properties by modulating the degree of substitution (DoS) of reactive-ene groups to investigate mechanotransducive cues received by meniscal fibrochondrocytes (MFCs) from their microenvironment. A thiol-ene step-growth polymerization crosslinking mechanism was employed using pentenoate-functionalized hyaluronic acid (PHA) and dithiothreitol to achieve tunability of the chemical crosslinks and resulting network properties. Increased crosslink density, reduced swelling, and increased compressive modulus (60-1020 kPa) were observed with increasing DoS. Osmotic deswelling effects were apparent in PBS and DMEM+ compared to water; swelling ratios and compressive moduli were decreased in the ionic buffers. Frequency sweep studies showed storage and loss moduli of hydrogels at 1 Hz approach reported meniscus values and showed increasing viscous response with increasing DoS. The degradation rate increased with decreasing DoS. Lastly, modulating PHA hydrogel surface modulus resulted in control of MFC morphology, suggesting relatively soft hydrogels (E = 60 ± 35 kPa) promote more inner meniscus phenotype compared to rigid hydrogels (E = 610 ± 66 kPa). Overall, these results highlight the use of -ene DoS modulation in PHA hydrogels to tune crosslink density and physical properties to understand mechanotransduction mechanisms required to promote meniscus regeneration.

The "How" and "Where" Behind the Functionalization of Graphene Oxide by Thiol-ene "Click" Chemistry

Graphene oxide (GO) is a 2D nanomaterial with unique chemistry due to the combination of sp2 hybridization and oxygen functional groups (OFGs) even in single layer. OFGs play a fundamental role in the chemical functionalization of GO to produce GO-based materials for diverse applications. However, traditional strategies that employ epoxides, alcohols, and carboxylic acids suffer from low control and undesirable side reactions, including by-product formation and GO reduction. Thiol-ene "click" reaction offers a promising and versatile chemical approach for the alkene functionalization (-C=C-) of GO, providing orthogonality, stereoselectivity, regioselectivity, and high yields while reducing by-products. This review examines the chemical functionalization of GO via thiol-ene "click" reactions, providing insights into the underlying reaction mechanisms, including the role of radical or base catalysts in triggering the reaction. We discuss the "how" and "where" the reaction takes place on GO, the strategies to avoid unwanted side reactions, such as GO reduction and by-product formation. We anticipate that multi-functionalization of GO via the alkene groups will enhance GO physicochemical properties while preserving its intrinsic chemistry.

Ligand-Crosslinking Strategy for Efficient Quantum Dot Light-Emitting Diodes via Thiol-Ene Click Chemistry

While solution-processable colloidal quantum dots (QDs) offer cost-effective and large-scale manufacturing, they can be susceptible to subsequent solution processes, making continuous processing challenging. To enable complex and integrated device architectures, robust QD films with subsequent patterning are necessary. Here, we report a facile ligand-crosslinking strategy based on thiol-ene click chemistry. Thiol molecules added to QD films react with UV light to form radicals that crosslink with QD ligands containing carbon double bonds, enabling microscale photo-patterning of QD films and enhancing their solvent resistance. This strategy can also be extended to other ligand-capped nanocrystals. It is found that the swelling of QD films during the process of binding with the thiol molecules placed between the ligands contributes to the improvement of photoluminescence and electroluminescence properties. These results suggest that the thiol-ene crosslinking modifies the optoelectronic properties and enables direct optical patterning, expanding the potential applications of QDs.

Thiyl radical induced cis/trans isomerism in double bond containing elastomers

This report presents an evaluation of thiyl radical-induced cis/trans isomerism in double bond-containing elastomers, such as natural, polychloroprene, and polybutadiene rubbers. The study aims to extensively investigate structural changes in polymers after functionalisation using thiol-ene chemistry, a useful click reaction for modifying polymers and developing materials with new functionalities. The paper reports on the use of different thiols, and cis/trans isomerism was detected through 1H NMR analysis, even at very low alkene/thiol mole ratios. The study finds that the configurational arrangements between non-functionalised elastomer units and thiolated units followed a trans-functionalised-cis units arrangement up to an alkene/thiol mole feed ratio of 0.3, while from 0.4 onward, a combination of trans-functionalised-cis and cis-functionalised-trans configurations are found. Additionally, it is observed that by increasing the level of functionalisation, the glass transition temperature of the resulting modified elastomer also increases. Overall, this study provides valuable insights into the effects of thiol-ene chemistry on the structure and properties of elastomers and could have important implications for the development of new materials with enhanced functionality.

Green-Light Responsive Perylene Bisimides for Atom-Economic Thiol Generation and Click-Ligation

Novel methylthiophene/benzo[b]thiophene perylene bisimide thiol-precursors that would generate thiols via a green-light-induced (λ_exc = 530 nm, φ_re = 0.33) photorearrangement are presented herein. The "no-wash", photoreleased thiols thus enabled a subsequent thiol-ene click ligation with electron-deficient substrates. Moreover, by virtue of the intrinsic fluorescence evolution from the rearrangement of perylene bisimide scaffolds, the whole process of thiol formation could be self-reported, further potentiating themselves with application versatilities.

Click Chemistry Hydrogels for Extrusion Bioprinting: Progress, Challenges, and Opportunities

The emergence of 3D bioprinting has allowed a variety of hydrogel-based "bioinks" to be printed in the presence of cells to create precisely defined cell-loaded 3D scaffolds in a single step for advancing tissue engineering and/or regenerative medicine. While existing bioinks based primarily on ionic cross-linking, photo-cross-linking, or thermogelation have significantly advanced the field, they offer technical limitations in terms of the mechanics, degradation rates, and the cell viabilities achievable with the printed scaffolds, particularly in terms of aiming to match the wide range of mechanics and cellular microenvironments. Click chemistry offers an appealing solution to this challenge given that proper selection of the chemistry can enable precise tuning of both the gelation rate and the degradation rate, both key to successful tissue regeneration; simultaneously, the often bio-orthogonal nature of click chemistry is beneficial to maintain high cell viabilities within the scaffolds. However, to date, relatively few examples of 3D-printed click chemistry hydrogels have been reported, mostly due to the technical challenges of controlling mixing during the printing process to generate high-fidelity prints without clogging the printer. This review aims to showcase existing cross-linking modalities, characterize the advantages and disadvantages of different click chemistries reported, highlight current examples of click chemistry hydrogel bioinks, and discuss the design of mixing strategies to enable effective 3D extrusion bioprinting of click hydrogels.

A disulfide-based linker for thiol–norbornene conjugation: formation and cleavage of hydrogels by the use of light

A photolinker for formation of disulfide-crosslinked hydrogels via light-triggered thiol–ene conjugation has been developed. Hydrogels can be patterned via two-photon cleavage of disulfide-linkages in the presence of a two-photon active compound.

Photoclick Chemistry: A Bright Idea

At its basic conceptualization, photoclick chemistry embodies a collection of click reactions that are performed via the application of light. The emergence of this concept has had diverse impact over a broad range of chemical and biological research due to the spatiotemporal control, high selectivity, and excellent product yields afforded by the combination of light and click chemistry. While the reactions designated as "photoclick" have many important features in common, each has its own particular combination of advantages and shortcomings. A more extensive realization of the potential of this chemistry requires a broader understanding of the physical and chemical characteristics of the specific reactions. This review discusses the features of the most frequently employed photoclick reactions reported in the literature: photomediated azide-alkyne cycloadditions, other 1,3-dipolarcycloadditions, Diels-Alder and inverse electron demand Diels-Alder additions, radical alternating addition chain transfer additions, and nucleophilic additions. Applications of these reactions in a variety of chemical syntheses, materials chemistry, and biological contexts are surveyed, with particular attention paid to the respective strengths and limitations of each reaction and how that reaction benefits from its combination with light. Finally, challenges to broader employment of these reactions are discussed, along with strategies and opportunities to mitigate such obstacles.

Visual Quantitative Detection of Glutathione and Cholesterol in Human Blood Based on the Thiol-Ene Click Reaction-Triggered Wettability Change of the Interface

Herein, we proposed an innovative visual quantitative sensing strategy based on thiol-ene click chemistry and the capillary action principle. A triethoxyvinylsilane (VTEO)- or mercaptopropylsilatrane (MPS)-modified interface was prepared for analyte recognition. Target analyte molecules containing thiol groups or C═C double bonds are coupled to the VTEO- or MPS-modified inner surface of the glass capillary tube via a thiol-ene click reaction, respectively. Then, the molecular recognition events were transformed into the wettability change of the inner wall of the glass capillary. The concentration of the target molecules was quantified by reading the height change of the water column in the capillary tube. As a proof of concept, this strategy was successfully used to build visual quantitative sensors for detecting glutathione and cholesterol. In addition, this strategy showed a good anti-interference ability to complex biological fluids and realized sensitive glutathione (GSH) and cholesterol detection in real human blood samples.

Facile Synthesis of Rapidly Degrading PEG-Based Thiol-Norbornene Hydrogels

An alternate synthesis route was developed to prepare norbornene-functionalized poly(ethylene glycol) (PEG) from reacting multiarm PEG with carbic anhydride. The macromer, PEGNB_CA, permits photo-cross-linking of thiol-norbornene hydrogels with kinetics comparable to conventional PEGNB macromer. In addition, PEGNB_CA provides an additional carboxylate group for further conjugation with amine-bearing molecules. Interestingly, PEGNB_CA thiol-norbornene hydrogels are highly susceptible to hydrolytic degradation through enhanced ester hydrolysis. The ester linkage is further weakened after the secondary conjugation, resulting in extremely rapid degradation of PEGNB hydrogels. More importantly, the degradation can be readily adjusted via tuning macromer compositions, with complete degradation time ranging from hours to weeks. The PEGNB_CA hydrogels are also highly cytocompatible toward various cell types, providing opportunities for future applications in tissue engineering and advanced biofabrication.

Light and Hydrogels: A New Generation of Antimicrobial Materials

Nosocomial diseases are becoming a scourge in hospitals worldwide, and new multidrug-resistant microorganisms are appearing at the forefront, significantly increasing the number of deaths. Innovative solutions must emerge to prevent the imminent health crisis risk, and antibacterial hydrogels are one of them. In addition to this, for the past ten years, photochemistry has become an appealing green process attracting continuous attention from scientists in the scope of sustainable development, as it exhibits many advantages over other methods used in polymer chemistry. Therefore, the combination of antimicrobial hydrogels and light has become a matter of course to design innovative antimicrobial materials. In the present review, we focus on the use of photochemistry to highlight two categories of hydrogels: (a) antibacterial hydrogels synthesized via a free-radical photochemical crosslinking process and (b) chemical hydrogels with light-triggered antibacterial properties. Numerous examples of these new types of hydrogels are described, and some notions of photochemistry are introduced.

Controlling the crystallinity and solubility of functional PCL with efficient post-polymerisation modification

Varying the size of an alkyl side-chain group, installed by thiol–ene addition of alkylthiols to poly(ε-allyl caprolactone), the semi-crystallinity and lipophilicity of functional PCLs could be modulated to achieve divergent physico-chemical properties.

Conjugation of biphenyl groups with poly(ethylene glycol) to enhance inhibitory effects on the PD-1/PD-L1 immune checkpoint interaction

Monoclonal antibodies have been developed as anticancer agents to block immune checkpoint pathways associated with programmed cell death 1 (PD-1) and its ligand PD-L1. However, the high cost of antibodies has encouraged researchers to develop other inhibitor types. Here, biphenyl compounds were conjugated with poly(ethylene glycol) (PEG) to enhance the activity of small molecular inhibitors. Immunoassay results revealed the decrease in the inhibition activity following conjugation with linear PEG, suggesting that the PEG moiety reduced the interaction between the biphenyl structure and PD-L1. However, the inhibitory effect on PD-1/PD-L1 interaction was further enhanced by using branched PEG conjugates. The increase in the number of conjugated biphenyl compounds resulted in increased inhibitory activity. The highest IC50 value was 0.33 μM, which was about 5 times higher than that observed for a non-conjugated monovalent compound. The inhibitory activity was more than 20 times the activity reported for the starting compound. Considering the increase in the inhibition activity, this multivalent strategy can be useful in the design of new immune checkpoint inhibitors.

Tunable Thiol-Ene Photo-Cross-Linked Chitosan-Based Hydrogels for Biomedical Applications

Access to biocompatible hydrogels with tunable properties is of great interest in biomedical applications. Here we report the synthesis and characterization of a series of photo-cross-linked chitosan hydrogels from norbornene-functionalized chitosan (CS-nb) and various thiolated cross-linkers. The resulting materials were characterized by NMR, swelling ratio, rheology, SEM, and small angle neutron scattering (SANS) measurements. The hydrogels exhibited pH- and salt-dependent swelling, while the macro- and microscale properties could be modulated by the choice and degree of cross-linker or the polymer concentration. The materials could be molded in situ and loaded with small molecules that can be released overtime. Moreover, the incorporation of collagen in the hydrogels drastically improved cell adhesion, with excellent viabilities of human dermofibroblast cells on the hydrogels observed for up to 6 days, highlighting the potential use of these materials in the biomedical area.

Stepwise Control of Crosslinking in a One-Pot System for Bioprinting of Low-Density Bioinks

Extrusion-based 3D bioprinting is hampered by the inability to print materials of low-viscosity. In this study, a single initiating system based on ruthenium (Ru) and sodium persulfate (SPS) is utilized for a sequential dual-step crosslinking approach: 1) primary (partial) crosslinking in absence of light to alter the bioink's rheological profile for print fidelity, and 2) subsequent secondary post-printing crosslinking for shape maintenance. Allyl-functionalized gelatin (Gel-AGE) is used as a bioink, allowing thiol-ene click reaction between allyl moieties and thiolated crosslinkers. A systematic investigation of primary crosslinking reveals that a thiol-persulfate redox reaction facilitates thiol-ene crosslinking, mediating an increase in bioink viscosity that is controllable by tailoring the Ru/SPS, crosslinker, and/or Gel-AGE concentrations. Thereafter, subsequent photoinitiated secondary crosslinking then facilitates maximum conversion of thiol-ene bonds between AGE and thiol groups. The dual-step crosslinking method is applicable to a wide biofabrication window (3-10 wt% Gel-AGE) and is demonstrated to allow printing of low-density (3 wt%) Gel-AGE, normally exhibiting low viscosity (4 mPa s), with high shape fidelity and high cell viability (>80%) over 7 days of culture. The presented approach can therefore be used as a one-pot system for printing low-viscous bioinks without the need for multiple initiating systems, viscosity enhancers, or complex chemical modifications.

Titanocenes as Photoredox Catalysts Using Green-Light Irradiation

Irradiation of Cp2 TiCl2 with green light leads to electronically excited [Cp2 TiCl2 ]*. This complex constitutes an efficient photoredox catalyst for the reduction of epoxides and for 5-exo cyclizations of suitably unsaturated epoxides. To the best of our knowledge, our system is the first example of a molecular titanium photoredox catalyst.

Polyesters with main and side chain phosphoesters as structural motives for biocompatible electrospun fibres

The functionalisation of polymacrolactones with phosphoesters was achieved by thiol–ene coupling resulting in copolymers with modulated properties.

Time-dependent covalent network formation in extrudable hydrogels

Shear-thinning hydrogels that utilize thiol-Michael chain-extension and free radical polymerization have a tunable stretchability.

Influence of charged groups on the cross-linking efficiency and release of guest molecules from thiol-ene cross-linked poly(2-oxazoline) hydrogels

We describe the preparation of hydrogels using highly functionalized poly(oxazoline) based polymeric precursors and cross-linking via UV mediated radical thiol-ene chemistry. Random copolymers were synthesized based on the combination of the more hydrophilic 2-methyl-2-oxazoline or the less hydrophilic monomer 2-ethyl-2-oxazoline with 2-(3-butenyl)-2-oxazoline. These copolymers were functionalized via a post-polymerization technique with thiol or cysteine functionality at the side chain. Hence, hydrogels were obtained, for which the thermo-responsive behavior, network density and correlated properties such as swelling and mechanics, as well as the possibility of electrostatic interaction, can be tuned. Cell culture tests demonstrated good cytocompatibility of the synthesized copolymers and hydrogels. A study with two low molecular weight substances, methylene blue and fluorescein sodium, was performed to investigate how the thermo-responsive behavior or the positive charge incorporated by cysteine could influence the interaction with the compounds. It was found that the interaction with the hydrogel network was strongly influenced by the chemical properties of the dye. A hydrophilic and positively charged hydrogel network was shown to be a promising candidate for the uptake and prolonged release of negatively charged low molecular weight substances.

The polymerization kinetics, oxidation-responsiveness, and in vitro anticancer efficacy of poly(ester-thioether)s

The oxidation-responsiveness and biomedical properties of poly(ester-thioether)s could be tuned by varying the polymer backbones.

Recent advances in photocatalytic C–S/P–S bond formation via the generation of sulfur centered radicals and functionalization

In this review, we have focused on the recent advances in photocatalytic C–S/P–S bond formation via the generation of thioyl/sulfonyl radicals and further functionalization.

Kinetic Model under Light-Limited Condition for Photoinitiated Thiol-Ene Coupling Reactions

Thiol-ene click chemistry has become a powerful paradigm in synthesis, materials science, and surface modification in the past decade. In the photoinitiated thiol-ene reaction, an induction period is often observed before the major change in its kinetic curve, for which a possible mechanism is proposed in this report. Briefly, light soaking generates radicals following the zeroth-order reaction kinetics. The radical is the reactant that initializes the chain reaction of thiol-ene coupling, which is a first-order reaction. Combining both and under the light-limited conditions, a surprising kinetics represented by a Gaussian-like model evolves that is different from the exponential model used to describe the first-order reaction of the final product. The experimental data are fitted well with the new model, and the reaction kinetic constants can be pulled out from the fitting.

Amine Induced Retardation of the Radical-Mediated Thiol-Ene Reaction via the Formation of Metastable Disulfide Radical Anions

The effect of amines on the kinetics and efficacy of radical-mediated thiol-ene coupling (TEC) reactions was investigated. By varying the thiol reactant and amine additive, it was shown that amines retard thiyl radical-mediated reactions when the amine is adequately basic enough to deprotonate the thiol affording the thiolate anion, e.g., when the weakly basic amine tetramethylethylenediamine was incorporated in the TEC reaction between butyl 2-mercaptoacetate and an allyl ether at 5 mol %, the final conversion was reduced from quantitative to <40%. Alternatively, no effect is observed when the less acidic thiol butyl 3-mercaptopropionate is employed. The thiolate anion was established as the retarding species through the introduction of ammonium and thiolate salt additives into TEC formulations. The formation of a two-sulfur three-electron bonded disulfide radical anion (DRA) species by the reaction of a thiyl radical with a thiolate anion was determined as the cause for the reduction in catalytic radicals and the TEC rate. Thermodynamic and kinetic trends in DRA formations were computed using density functional theory and by modeling the reaction as an associative electron transfer process. These trends correlate well with the experimental retardation trends of various thiolate anions in TEC reactions.