Synthesis of Ferrocene-Branched Chitosan Derivatives: Redox Polysaccharides and their Application to Reagentless Enzyme-Based Biosensors

Dipole moment as the underlying mechanism for enhancing the immobilization of glucose oxidase by ferrocene-chitosan for superior specificity non-invasive glucose sensing

Non-invasive methods for sensing glucose levels are highly desirable due to the comfortableness, simplicity, and lack of infection risk. However, the insufficient accuracy and ease of interference limit their practical medical applications. Here, we develop a non-invasive salivary glucose biosensor based on a ferrocene-chitosan (Fc-Chit) modified carbon nanotube (CNT) electrode through a simple drop-casting method. Compared with previous studies that relied mainly on trial and error for evaluation, this is the first time that dipole moment was proposed to optimize the electron-mediated Fc-Chit, demonstrating sturdy immobilization of glucose oxidase (GOx) on the electrode and improving the electron transfer process. Thus, the superior sensing sensitivity of the biosensor can achieve 119.97 μA mM-1 cm-2 in phosphate buffered saline (PBS) solution over a wide sensing range of 20-800 μM. Additionally, the biosensor exhibited high stability (retaining 95.0% after three weeks) and high specificity toward glucose in the presence of various interferents, attributed to the specific sites enabling GOx to be sturdily immobilized on the electrode. The results not only provide a facile solution for accurate and regular screening of blood glucose levels via saliva tests but also pave the way for designing enzymatic biosensors with specific enzyme immobilization through fundamental quantum calculations.

Fabrication of glucose bioelectrochemical sensor based on Au@Pd core-shell supported by carboxylated graphene oxide

The study presents a novel electrochemical glucose biosensor based on glucose oxidase (GOx) immobilized on Au@Pd core-shell nanoparticles supported on carboxylated graphene oxide (cGO). The immobilization of GOx was achieved by cross-linking the chitosan biopolymer (CS) including Au@Pd/cGO and glutaraldehyde (GA) on a glassy carbon electrode. The analytical performance of GCE/Au@Pd/cGO-CS/GA/GOx was investigated using amperometry. The biosensor had fast response time (5.2 ± 0.9 s), a satisfactory linear determination range between 2.0 × 10^-5 and 4.2 × 10^-3 M, and limit of detection of 10.4 μM. The apparent Michaelis-Menten constant (K_app) was calculated as 3.04 mM. The fabricated biosensor also exhibited good repeatability, reproducibility, and storage stability. No interfering signals from dopamine, uric acid, ascorbic acid, paracetamol, folic acid, mannose, sucrose, and fructose were observed. The large electroactive surface area of carboxylated graphene oxide is a promising candidate for sensor preparation.

Ferrocene tagged primary antibody generates electrochemical signal: An electrochemical immunosensing platform for the monitoring of vitamin D deficiency in clinical samples

In this paper, a new kind of ultrasensitive and low-cost electrochemical immunosensing probe was designed to monitor vitamin D deficiency using 25(OH)D₃ as a clinical biomarker. Ferrocene carbaldehyde conjugated on Ab-25(OH)D₃ antibodies was used as an electrochemical probe for generating signals. The graphene nanoribbon-modified electrode (GNRs) was used to immobilize the (Ab-25(OH)D₃-Fc) conjugate. The high electron transferability, greater surface area, and effective biocompatibility of GNRs enabled the capture of the greater number of primary antibodies (Ab-25(OH)D₃). The developed probe was structurally and morphologically characterized. The step-wise modification was investigated by electrochemical techniques. The direct electrochemistry of ferrocene enabled 25(OH)D₃ biomarker detection with excellent sensitivity. The reduction in peak current was proportional to the concentrations of 25(OH)D₃ in the range of 1-100 ng mL^-1 with a 0.1 ng mL^-1 limit of detection. The probe was tested in terms of reproducibility, repeatability, and stability. Finally, the developed immunosensing probe was applied in serum samples for 25(OH)D₃ quantification, and no significant difference was noticed in the assay results when compared with the standard chemiluminescent immunoassay (CLIA) method. The developed detection strategy has a wider scope for future potential clinical diagnostics applications.

Recent advances in sustainable nature-based functional materials for biomedical sensor technologies

The lightweight, low-density, and low-cost natural polymers like cellulose, chitosan, and silk have good chemical and biodegradable properties due to their individually unique structural and functional elements. However, the mechanical properties of these polymers differ from each other. In this scenario, chitosan lacks good mechanical properties than cellulose and silk. The synthesis of nano natural polymer and reinforcement with suitable chemical compounds as the development of nanocomposite gives them promising multidisciplinary applications. Many kinds of research are already published with innovative bio-derived polymeric functional materials (Bd-PFM) applications. Most research interest is carried out on health concerns. Lots of attention has been paid to biomedical applications of Bd-PFM as biosensors. This review aims to provide a glimpse of the nanostructures Bd-PFM biosensors.

The Bioanalytical and Biomedical Applications of Polymer Modified Substrates

Polymers with different structures and morphology have been extensively used to construct functionalized surfaces for a wide range of applications because the physicochemical properties of polymers can be finely adjusted by their molecular weights, polydispersity and configurations, as well as the chemical structures and natures of monomers. In particular, the specific functions of polymers can be easily achieved at post-synthesis by the attachment of different kinds of active molecules such as recognition ligand, peptides, aptamers and antibodies. In this review, the recent advances in the bioanalytical and biomedical applications of polymer modified substrates were summarized with subsections on functionalization using branched polymers, polymer brushes and polymer hydrogels. The review focuses on their applications as biosensors with excellent analytical performance and/or as nonfouling surfaces with efficient antibacterial activity. Finally, we discuss the perspectives and future directions of polymer modified substrates in the development of biodevices for the diagnosis, treatment and prevention of diseases.

Use of biocompatible redox-active polymers based on carbon nanotubes and modified organic matrices for development of a highly sensitive BOD biosensor

This work investigated the use of redox-active polymers based on bovine serum albumin and chitosan, covalently bound to mediators neutral red and ferrocene and containing carbon nanotubes, for immobilization of Paracoccus yeei VKM B-3302 bacteria. The structures of produced polymers were studied by IR spectroscopy and scanning electron microscopy. Cyclic voltammetry and impedance spectroscopy found the electrochemical characteristics of the investigated systems: the heterogeneous electron transfer rate constant, the constant of the rate of interaction with P. yeei bacteria and the impedance. The systems containing carbon nanotubes and ferrocene-based redox-active polymer proved to be the most promising. Biosensors formed using the hybrid polymers had a high sensitivity with the lower boundary of 0.1 mg/dm³ of the detected BOD₅ concentrations and a high correlation (R = 0.9916) with the standard BOD assay of surface water samples.

Effect of Poly-l-Lysine Polycation on the Glucose Oxidase/Ferricyanide Composite-Based Second-Generation Blood Glucose Sensors

Second-generation glucose biosensors are presently the mainstream commercial solution for blood glucose measurement of diabetic patients. Screen-printed carbon electrodes (SPCEs) are the most-used substrate for glucose testing strips. This study adopted hydrophilic and positively charged α-poly-l-lysine (αPLL) as the entrapment matrix for the immobilization of negatively charged glucose oxidase (GOx) and ferricyanide (FIC) on SPCEs to construct a disposable second-generation glucose biosensor. The αPLL modification is shown to facilitate the redox kinetics of FIC and ferrocyanide on the SPCEs. The SPCEs coated with 0.5 mM GOx, 99.5 mM FIC, and 5 mM αPLL had better sensitivity for glucose detection due to the appreciable effect of protonated αPLL on the promotion of electron transfer between GOx and FIC. Moreover, the SPCEs coated with 0.5 mM GOx, 99.5 mM FIC, and 5 mM αPLL were packaged as blood glucose testing strips for the measurement of glucose-containing human serum samples. The glucose testing strips had good linearity from 2.8 mM to 27.5 mM and a detection limit of 2.3 mM. Moreover, the 5 mM αPLL-based glucose testing strips had good long-term stability to maintain GOx activity in aging tests at 50 °C.

Three dimensional sea-urchin-like PdAuCu nanocrystals/ferrocene-grafted-polylysine as an efficient probe to amplify the electrochemical signals for ultrasensitive immunoassay of carcinoembryonic antigen

A novel sandwich-like immunosensor was efficiently fabricated for detection of carcinoembryonic antigen (CEA) with three dimensional sea-urchin-like PdAuCu nanocrystals (PdAuCu NCs)/ferrocene-grafted-polylysine (Fc-g-PLL) as the label of secondary antibodies (Ab₂) and Au nanoparticles (Au NPs) as the substrate material. Herein, PdAuCu NCs were directly synthesized with polyethylene oxide (PEO) as a growth-directing agent by a facile one-step aqueous method without any organic solvent. Meanwhile, Fc-g-PLL was obtained by covalent linkage of Fc with PLL via Schiff-base reaction. The well-dispersed PdAuCu NCs by Fc-g-PLL have the enlarged surface area, enhanced catalytic properties and superior biocompatibility to amplify the current signals. The resultant immunosensor shows linear relationship of the electrochemical responses with the CEA concentrations within a broader linear range (0.001-100.0 ng mL^-1) and a lower detection limit (0.23 pg mL^-1, S/N = 3). Furthermore, the immunosensor was explored for practical assay of CEA in human serum samples with accredited results. The novel immunoassay provides a feasible platform for early medical diagnosis.

Organic Transistor Arrays Integrated with Finger-Powered Microfluidics for Multianalyte Saliva Testing

A compact multianalyte biosensing platform is reported, composed of an organic electrochemical transistor (OECT) microarray integrated with a pumpless "finger-powered" microfluidic, for quantitative screening of glucose, lactate, and cholesterol levels. A biofunctionalization method is designed, which provides selectivity towards specific metabolites as well as minimization of any background interference. In addition, a simple method is developed to facilitate multi-analyte sensing and avoid electrical crosstalk between the different transistors by electrically isolating the individual devices. The resulting biosensing platform, verified using human samples, offers the possibility to be used in easy-to-obtain biofluids with low abundance metabolites, such as saliva. Based on our proposed method, other types of enzymatic biosensors can be integrated into the array to achieve multiplexed, noninvasive, personalized point-of-care diagnostics.

Organometallic polymers for electrode decoration in sensing applications

Macromolecules containing metals combine the processing advantages of polymers with the functionality offered by the metal centers. The developments in the area of electrochemical chemo/biosensors based on organometallic polymers are reviewed.

Functionalization of monolithic and porous three-dimensional graphene by one-step chitosan electrodeposition for enzymatic biosensor

Biological modification of monolithic and porous 3D graphene is of great significance for extending its application in fabricating highly sensitive biosensors. The present work reports on the first biofunctionalization of monolithic and freestanding 3D graphene foam for one-step preparation of reagentless enzymatic biosensors by controllable chitosan (CS) electrodeposition technology. Using a homogeneous three-component electrodeposition solution containing a ferrocene (Fc) grafted CS hybrid (Fc-CS), glucose oxidase (GOD), and single-walled carbon nanotubes (SWNTs), a homogeneous biocomposite film of Fc-CS/SWNTs/GOD was immobilized on the surface of 3D graphene foam by one-step electrodeposition. The Fc groups grafted on chitosan can be stably immobilized on the 3D graphene surface and keep their original electrochemical activity. The SWNTs doped into the Fc-CS matrix act as a nanowire to facilitate electron transfer and improve the conductivity of the biocomposite film. Combined with the extraordinary properties of 3D graphene foam including large active surface area, high conductivity, and fast mass transport dynamics, the 3D graphene based enzymatic biosensor achieved a large linear range (5.0 μM to 19.8 mM), a low detection limit (1.2 μM), and rapid response (reaching the 95% steady-state response within 8 s) for reagentless detection of glucose in the phosphate buffer solution.

Synthesis of redox polymer nanobeads and nanocomposites for glucose biosensors

Redox polymer nanobeads of branched polyethylenimine binding with ferrocene (BPEI-Fc) were synthesized using a simple chemical process. The functionality and morphology of the redox polymer nanobeads were investigated by Fourier transform infrared spectroscopy (FTIR) and transmission electron microscopy (TEM). This hydrophilic redox nanomaterial could be mixed with glucose oxidase (GOx) for drop-coating on a screen-printed carbon electrode (SPCE) for glucose sensing application. Electrochemical properties of the BPEI-Fc/GOx/SPCE prepared under different conditions were studied by cyclic voltammetry (CV). On the basis of these CV results, the synthetic condition of the BPEI-Fc/GOx/SPCE could be optimized. By incorporating conductive poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS), the performance of a redox polymer nanobead–based enzyme electrode could be further improved. The influence of PEDOT:PSS on the nanocomposite enzyme electrode was discussed from the aspects of the apparent electron diffusion coefficient (D(app)) and the charge transfer resistance (R(ct)). The glucose-sensing sensitivity of the BPEI-Fc/PEDOT:PSS/GOx/SPCE is calculated to be 66 μA mM(–1) cm(–2), which is 2.5 times higher than that without PEDOT:PSS. The apparent Michaelis constant (K(M)(app)) of the BPEI-Fc/PEDOT:PSS/GOx/SPCE estimated by the Lineweaver–Burk plot is 2.4 mM, which is much lower than that of BPEI-Fc/GOx/SPCE (11.2 mM). This implies that the BPEI-Fc/PEDOT:PSS/GOx/SPCE can catalytically oxidize glucose in a more efficient way. The interference test was carried out by injection of glucose and three common interferences: ascorbic acid (AA), dopamine (DA), and uric acid (UA) at physiological levels. The interferences of DA (4.2%) and AA (7.8%) are acceptable and the current response to UA (1.6%) is negligible, compared to the current response to glucose.

Enlarging the Toolbox: Epoxide Termination of Polyferrocenylsilane (PFS) as a Key Step for the Synthesis of Amphiphilic PFS-Polyether Block Copolymers

Epoxide termination and functionalization of living poly(ferrocenyldimethylsilane) (PFDMS) is introduced by precapping the living PFDMS with a 4/2 molar mixture of 1,1-diphenylethylene and 1,1-dimethylsilacyclobutane acting as a "carbanion pump" system. Subsequent addition of allyl glycidyl ether (AGE) leads to quantitatively functionalized PFDMS-AGE polymers with molecular weights between 1500 and 15 400 g mol^-1 and polydispersity indices ≤1.10, carrying one hydroxyl group and an additional allylic double bond. PFDMS-AGE was then applied as a macroinitiator for the living anionic ring-opening polymerization of ethylene oxide (EO) to generate amphiphilic and water-soluble poly(ferrocenyldimethylsilane-b-ethylene oxide) block copolymers with a low polydispersity index. All polymers have been characterized by ¹H NMR spectroscopy, DOSY ¹H NMR spectroscopy, size exclusion chromatography (SEC), and MALDI-ToF mass spectrometry. In addition, for the characterization of the morphology of the PFDMS-b-PEO block copolymers transmission electron microscopy (TEM) was performed in methanol, confirming the formation of cylindrical micelles with an organometallic core and polyether corona.