Mechanistic Study on the Degradation of Hydrolysable Core-Crosslinked Polymeric Micelles

Core-crosslinked polymeric micelles (CCPMs) are an attractive class of nanocarriers for drug delivery. Two crosslinking approaches to form CCPMs exist: either via a low-molecular-weight crosslinking agent to connect homogeneous polymer chains with reactive handles or via cross-reactive handles on polymers to link them to each other (complementary polymers). Previously, CCPMs based on methoxy poly(ethylene glycol)-b-poly[N-(2-hydroxypropyl) methacrylamide-lactate] (mPEG-b-PHPMAmLacn) modified with thioesters were crosslinked via native chemical ligation (NCL, a reaction between a cysteine residue and thioester resulting in an amide bond) using a bifunctional cysteine containing crosslinker. These CCPMs are degradable under physiological conditions due to hydrolysis of the ester groups present in the crosslinks. The rapid onset of degradation observed previously, as measured by the light scattering intensity, questions the effectiveness of crosslinking via a bifunctional agent. Particularly due to the possibility of intrachain crosslinks that can occur using such a small crosslinker, we investigated the degradation mechanism of CCPMs generated via both approaches using various analytical techniques. CCPMs based on complementary polymers degraded slower at pH 7.4 and 37 °C than CCPMs with a crosslinker (the half-life of the light scattering intensity was approximately 170 h versus 80 h, respectively). Through comparative analysis of the degradation profiles of the two different CCPMs, we conclude that partially ineffective intrachain crosslinks are likely formed using the small crosslinker, which contributed to more rapid CCPM degradation. Overall, this study shows that the type of crosslinking approach can significantly affect degradation kinetics, and this should be taken into consideration when developing new degradable CCPM platforms.

Random versus Block Glycopolymers Bearing Betulin and Porphyrin for Enhanced Photodynamic Therapy

Porphyrins and their derivatives, representing the second-generation photosensitizers, can generate reactive oxygen species (ROS) and kill tumors upon light irradiation. To compensate for the fluorescence quenching and reduced ROS production caused by aggregation and rigid inherent hydrophobicity of porphyrins, a series of comparable random and block glycopolymers bearing betulin and porphyrin were prepared via RAFT polymerization. Betulin was introduced into the copolymers to decrease aggregation-induced quenching of porphyrins and to improve the photodynamic therapy (PDT) efficiency of copolymers. The characteristics, self-assembly, and photophysical chemistry properties of these copolymers were systemically studied. The effect of polymer structure on photophysical chemistry properties and cellular interaction was investigated as well to demonstrate their potential targeting for PDT applications.

Current Advances in Nano-Based and Polymeric Stimuli-Responsive Drug Delivery Targeting the Ocular Microenvironment: A Review and Envisaged Future Perspectives

Optimal vision remains one of the most essential elements of the sensory system continuously threatened by many ocular pathologies. Various pharmacological agents possess the potential to effectively treat these ophthalmic conditions; however, the use and efficacy of conventional ophthalmic formulations is hindered by ocular anatomical barriers. Recent novel designs of ophthalmic drug delivery systems (DDS) using nanotechnology show promising prospects, and ophthalmic formulations based on nanotechnology are currently being investigated due to their potential to bypass these barriers to ensure successful ocular drug delivery. More recently, stimuli-responsive nano drug carriers have gained more attention based on their great potential to effectively treat and alleviate many ocular diseases. The attraction is based on their biocompatibility and biodegradability, unique secondary conformations, varying functionalities, and, especially, the stimuli-enhanced therapeutic efficacy and reduced side effects. This review introduces the design and fabrication of stimuli-responsive nano drug carriers, including those that are responsive to endogenous stimuli, viz., pH, reduction, reactive oxygen species, adenosine triphosphate, and enzymes or exogenous stimuli such as light, magnetic field or temperature, which are biologically related or applicable in clinical settings. Furthermore, the paper discusses the applications and prospects of these stimuli-responsive nano drug carriers that are capable of overcoming the biological barriers of ocular disease alleviation and/or treatment for in vivo administration. There remains a great need to accelerate the development of stimuli-responsive nano drug carriers for clinical transition and applications in the treatment of ocular diseases and possible extrapolation to other topical applications such as ungual or otic drug delivery.

Hierarchy of Complex Glycomacromolecules: From Controlled Topologies to Biomedical Applications

Carbohydrates bearing a distinct complexity use a special code (Glycocode) to communicate with carbohydrate-binding proteins at a high precision to manipulate biological activities in complex biological environments. The level of complexity in carbohydrate-containing macromolecules controls the amount and specificity of information that can be stored in biomacromolecules. Therefore, a better understanding of the glycocode is crucial to open new areas of biomedical applications by controlling or manipulating the interaction between immune cells and pathogens in terms of trafficking and signaling, which would become a powerful tool to prevent infectious diseases. Even though a certain level of progress has been achieved over the past decade, synthetic glycomacromolecules are still lagging far behind naturally existing glycans in terms of complexity and precision because of insufficient and inefficient synthetic techniques. Currently, specific targeting at a cellular level using synthetic glycomacromolecules is still challenging. It is obvious that multidisciplinary collaborations are essential between different specialized disciplines to enhance the carbohydrate receptor-targeting paradigm for new biomedical applications. In this Perspective, recent developments in the synthesis of sophisticated glycomacromolecules are highlighted, and their biological and biomedical applications are also discussed in detail.

Core-crosslinked, temperature- and pH-responsive micelles: design, physicochemical characterization, and gene delivery application

Stimuli-responsive block copolymer micelles can provide tailored properties for the efficient delivery of genetic material. In particular, temperature- and pH-responsive materials are of interest, since their physicochemical properties can be easily tailored to meet the requirements for successful gene delivery. Within this study, a stimuli-responsive micelle system for gene delivery was designed based on a diblock copolymer consisting of poly(N,N-diethylacrylamide) (PDEAm) as a temperature-responsive segment combined with poly(aminoethyl acrylamide) (PAEAm) as a pH-responsive, cationic segment. Upon temperature increase, the PDEAm block becomes hydrophobic due to its lower critical solution temperature (LCST), leading to micelle formation. Furthermore, the monomer 2-(pyridin-2-yldisulfanyl)ethyl acrylate (PDSAc) was incorporated into the temperature-responsive PDEAm building block enabling disulfide crosslinking of the formed micelle core to stabilize its structure regardless of temperature and dilution. The cloud points of the PDEAm block and the diblock copolymer were investigated by turbidimetry and fluorescence spectroscopy. The temperature-dependent formation of micelles was analyzed by dynamic light scattering (DLS) and elucidated in detail by an analytical ultracentrifuge (AUC), which provided detailed insights into the solution dynamics between polymers and assembled micelles as a function of temperature. Finally, the micelles were investigated for their applicability as gene delivery vectors by evaluation of cytotoxicity, pDNA binding, and transfection efficiency using HEK293T cells. The investigations showed that core-crosslinking resulted in a 13-fold increase in observed transfection efficiency. Our study presents a comprehensive investigation from polymer synthesis to an in-depth physicochemical characterization and biological application of a crosslinked micelle system including stimuli-responsive behavior.

HER2-Targeted, Degradable Core Cross-Linked Micelles for Specific and Dual pH-Sensitive DOX Release

Here, a targeted, dual-pH responsive, and stable micelle nanocarrier is designed, which specifically selects an HER2 receptor on breast cancer cells. Intracellularly degradable and stabilized micelles are prepared by core cross-linking via reversible addition-fragmentation chain-transfer (RAFT) polymerization with an acid-sensitive cross-linker followed by the conjugation of maleimide-doxorubicin to the pyridyl disulfide-modified micelles. Multifunctional nanocarriers are obtained by coupling HER2-specific peptide. Formation of micelles, addition of peptide and doxorubicin (DOX) are confirmed structurally by spectroscopical techniques. Size and morphological characterization are performed by Zetasizer and transmission electron microscope (TEM). For the physicochemical verification of the synergistic acid-triggered degradation induced by acetal and hydrazone bond degradation, Infrared spectroscopy and particle size measurements are used. Drug release studies show that DOX release is accelerated at acidic pH. DOX-conjugated HER2-specific peptide-carrying nanocarriers significantly enhance cytotoxicity toward SKBR-3 cells. More importantly, no selectivity toward MCF-10A cells is observed compared to HER2(+) SKBR-3 cells. Formulations cause apoptosis depending on Bax and Caspase-3 and cell cycle arrest in G2 phase. This study shows a novel system for HER2-targeted therapy of breast cancer with a multifunctional nanocarrier, which has higher stability, dual pH-sensitivity, selectivity, and it can be an efficient way of targeted anticancer drug delivery.

Protecting redesigned supercharged ferritin containers against protease by integration into acid-cleavable polyelectrolyte microgels

HYPOTHESIS

The application of ferritin containers as a promising drug delivery vehicle is limited by their low bioavailability in blood circulation due to unfavorable environments, such as degradation by protease. The integration of ferritin containers into the polymeric network of microgels through electrostatic interactions is expected to be able to protect ferritin against degradation by protease. Furthermore, a stimuli-responsive microgel system can be designed by employing an acid-degradable crosslinker during the microgel synthesis. This should enable ferritin release in an acidic environment, which will be useful for future drug delivery applications.

EXPERIMENTS

Nanoparticle/fluorophores-loaded ferritin was integrated into microgels during precipitation polymerization. The integration was monitored by transmission electron microscopy (TEM)² and fluorescence microscopy, respectively. After studying ferritin release in acidic solutions, we investigated the stability of ferritin inside microgels against degradation by chymotrypsin.

FINDINGS

About 80% of the applied ferritin containers were integrated into microgels and around 85% and 50% of them could be released in buffer pH 2.5 and 4.0, respectively. Total degradation of the microgels was not achieved due to the self-crosslinking of N-isopropylacrylamide (NIPAM). Finally, we prove that microgels could protect ferritin against degradation by chymotrypsin at 37 °C.

Amphiphilic mannose-6-phosphate glycopolypeptide-based bioactive and responsive self-assembled nanostructures for controlled and targeted lysosomal cargo delivery

Receptors of carbohydrate mannose-6-phosphate (M6P) are overexpressed in specific cancer cells (such as breast cancer) and are also involved in the trafficking of mannose-6-phosphate labeled proteins exclusively onto lysosomes via cell surface M6P receptor (CI-MPR) mediated endocytosis. Herein, for the first time, mannose-6-phosphate glycopolypeptide (^M6PGP)-based bioactive and stimuli-responsive nanocarriers are reported. They are selectively taken up via receptor-mediated endocytosis, and trafficked to lysosomes where they are subsequently degraded by pH or enzymes, leading to the release of the cargo inside the lysosomes. Two different amphiphilic M6P block copolymers ^M6PGP₁₅-^APPO₄₄ and ^M6PGP₁₅-(PCL₂₅)₂ were synthesized by click reaction of the alkyne end-functionalized ^M6PGP₁₅ with pH-responsive biocompatible azide end-functionalized acetal PPO and azide end-functionalized branched PCL, respectively. In water, the amphiphilic M6P-glycopolypeptide block copolymers self-assembled into micellar nanostructures, as was evidenced by DLS, TEM, AFM, and fluorescence spectroscopy techniques. These micellar systems were competent to encapsulate the hydrophobic dye rhodamine-B-octadecyl ester, which was used as the model drug. They were stable at physiological pH but were found to disassemble at acidic pH (for ^M6PGP₁₅-^APPO₄₄) or in the presence of esterase (for ^M6PGP₁₅-(PCL₂₅)₂). These ^M6PGP based micellar nanoparticles can selectively target lysosomes in cancerous cells such as MCF-7 and MDA-MB-231. Finally, we demonstrate the clathrin-mediated endocytic pathway of the native FL-^M6PGP polymer and RBOE loaded ^M6PGP micellar-nanocarriers, and selective trafficking of MCF-7 and MDA-MB-231 breast cancer cell lysosomes, demonstrating their potential applicability toward receptor-mediated lysosomal cargo delivery.

Multi-Arm Star-Shaped Glycopolymers with Precisely Controlled Core Size and Arm Length

Star-shaped glycopolymers provide very high binding activities toward lectins. However, a straightforward synthesis method for the preparation of multi-arm glycopolymers in a one-pot approach has been challenging. Herein, we report a rapid synthesis of well-defined multi-arm glycopolymers via Cu(0)-mediated reversible deactivation radical polymerization in aqueous media. d-Mannose acrylamide has been homo- and copolymerized with NIPAM to provide linear arms and then core cross-linked with a bisacrylamide monomer. Thus, the arm length and core size of multi-arm glycopolymers were tuned. Moreover, the stability of multi-arm glycopolymers was investigated, and degradation reactions under acidic or basic conditions were observed. The binding activities of the obtained multi-arm glycopolymers with mannose-specific human lectins, DC-SIGN and MBL, were investigated via surface plasmon resonance spectroscopy. Finally, the encapsulation ability of multi-arm glycopolymers was examined using DHA and Saquinavir below and above the lower critical solution temperature (LCST) of P(NIPAM).

Multifunctional dual-mesoporous silica nanoparticles loaded with a protein and dual antitumor drugs as a targeted delivery system

Herein, dual-mesoporous structure silica (with pore sizes from 2 to 4 nm and from 4 to 16 nm) simultaneously modified with amino and carboxyl groups was successfully synthesized.

Thermoplastic polyacetals: chemistry from the past for a sustainable future?

This review serves as a guide to the synthesis and applications of thermoplastic polyacetals, highlighting in particular sustainability and degradability aspects.

In Situ Growth and Size Regulation of Single Gold Nanoparticles in Composite Microgels

Herein, a novel method for the in situ growth of single gold nanoparticles (AuNPs) in microgel (MG) networks is presented. The key feature in this approach is the localization of β-diketone groups capable of both complexation and reduction of aurate ions in the MGs' core, which allows localization of the nucleation and growth of single AuNPs. The MG synthesis is carried out via precipitation polymerization in water with N-vinylcaprolactam as the main monomer and with the two comonomers acetoacetoxyethyl methacrylate (AAEM) and acrylic acid (AAc), where AAEM is mainly located in the MGs' core and AAc in their shell. For the synthesis of AuNPs, a certain amount of chloroauric acid (HAuCl₄ ) is added to the dispersion, followed by fast reduction with sodium borohydride (NaBH₄ ). In situ synthesized AuNPs in MGs possess a spherical shape, with a diameter of 8.1 ± 0.8 nm, being localized in the center of every MG. In addition, these AuNPs embedded into MG networks can be used as seeds that grow in their size after the addition of HAuCl₄ up to 46.0 ± 9.5 nm under mild reaction conditions (room temperature, aqueous dispersion) and without the use of any additional reducing and stabilizing agents.

Transiently thermoresponsive polymers and their applications in biomedicine

The focus of this review is on the class of transiently thermoresponsive polymers. These polymers are thermoresponsive, but gradually lose this property upon chemical transformation - often a hydrolysis reaction - in the polymer side chain or backbone. An overview of the different approaches used for the design of these polymers along with their physicochemical properties is given. Their amphiphilic properties and degradability into fully soluble compounds make this class of responsive polymers attractive for drug delivery and tissue engineering applications. Examples of these are also provided in this review.

Arm-First Approach toward Cross-Linked Polymers with Hydrophobic Domains via Hypervalent Iodine-Mediated Click Chemistry

In this work, synthesis of two cross-linked polymeric systems through isoxazoline ring formation using nitrile oxide-acrylate click chemistry has been described. In the first system, styrenic block copolymer with oxime-functionalized middle block was synthesized using S,S'-bis(α,α'-dimethyl-α″-acetic acid)trithiocarbonate as chain-transfer agent using reversible addition fragmentation chain-transfer technique. This block copolymer was further utilized to prepare core cross-linked star polymers by reacting with a four-arm acrylic cross-linker by employing environment-friendly, nontoxic PhI(OAc)2-mediated "click reaction" via the formation of isoxazoline ring. In the second system, two linear styrenic block copolymers, one containing oxime and another containing acrylate group, were reacted to form a cross-linked (CS) polymeric system. Formation of cross-linked polymers and isoxazoline ring was confirmed by Fourier transform infrared spectroscopy, gel permeation chromatography, NMR spectroscopy, and dynamic light scattering studies. Later, we also demonstrated that in aqueous medium these CS polymers produced polymeric nanoparticles (NPs), which can be used as potential carriers of hydrophobic drug molecules. The loading capacity of the hydrophobic domains has been investigated using coumarin dyes with varying hydrophobicity through steady-state and time-resolved spectroscopy studies. The polymeric NPs were also shown to successfully encapsulate a hydrophobic drug doxorubicin.

pH dependent silver nanoparticles releasing titanium implant: A novel therapeutic approach to control peri-implant infection

Peri-implant infection control is crucial for implant fixation and durability. Antimicrobial administration approaches to control peri-implant infection are far from satisfactory. During bacterial infection, pH level around the peri-implant surface decreases as low as pH 5.5. This change of pH can be used as a switch to control antimicrobial drug release from the implant surface. Silver nanoparticles (AgNPs) have broad-spectrum antimicrobial properties. In this study, we aimed to design a pH-dependent AgNPs releasing titania nanotube arrays (TNT) implant for peri-implant infection control. The nanotube arrays were fabricated on the surface of titanium implant as containers; AgNPs were grafted on TNT implant surface via a low pH-sensitive acetal linker (TNT-AL-AgNPs). SEM, TEM, AFM, FTIR as well as XPS data showed that AgNPs have been successfully linked to TNT via acetal linker without affecting the physicochemical characteristics of TNT. The pH 5.5 enhanced AgNPs release from TNT-AL-AgNPs implant compared with pH 7.4. AgNPs released at pH 5.5 robustly increased antimicrobial activities against gram-positive and gram-negative bacteria compared with AgNPs released at pH 7.4. TNT-AL-AgNPs implant enhanced osteoblast proliferation, differentiation, and did not affect osteoblast morphology in vitro. In conclusion, incorporation of AgNPs in TNT via acetal linker maintained the surface characteristics of TNT. TNT-AL-AgNPs implant was biocompatible to osteoblasts and showed osteoinductive properties. AgNPs were released from TNT-AL-AgNPs implant in high dose at pH 5.5, and this release showed strong antimicrobial properties in vitro. Therefore, this novel design of low pH-triggered AgNPs releasing TNT-AL-AgNPs could be an infection-triggered antimicrobial releasing implant model to control peri-implant infection.

Hollow amphiphilic crosslinked nanocapsules from sacrificial silica nanoparticle templates and their application as dispersants for oil spill remediation

Hollow nanocapsules were constructed using a sacrificial silica scaffold to produce novel oil remediation agents.

Phospholipid End-Capped Acid-Degradable Polyurethane Micelles for Intracellular Delivery of Cancer Therapeutics

Nanoscale drug carriers fabricated by phospholipid end-capped polyurethane bearing acetal backbones that degrade in acidic conditions are fabricated. These micelles effectively allow drugs to enter the blood circulation, and then disintegrate in acidic endosomes and lysosomes for intelligent delivery of payloads.

Well-defined single polymer nanoparticles for the antibody-targeted delivery of chemotherapeutic agents

Aqueous reversible addition-fragmentation chain transfer (RAFT) polymerization was employed to prepare a series of linear copolymers of N,N-dimethylacrylamide (DMA) and 2-hydroxyethylacrylamide (HEAm) with narrow Đ values over a molecular weight range spanning three orders of magnitude (103 to 106 Da). Trithiocarbonate-based RAFT chain transfer agents (CTAs) were grafted onto these scaffolds using carbodiimide chemistry catalyzed with DMAP. The resultant graft chain transfer agent (gCTA) was subsequently employed to synthesize polymeric brushes with a number of important vinyl monomer classes including acrylamido, methacrylamido, and methacrylate. Brush polymerization kinetics were evaluated for the aqueous RAFT polymerization of DMA from a 10 arm gCTA. Polymeric brushes containing hydroxyl functionality were further functionalized in order to prepare 2nd generation gCTAs which were subsequently employed to prepare polymers with a brushed-brush architecture with molecular weights in excess of 106 Da. These resultant single particle nanoparticles (SNPs) were employed as drug delivery vehicles for the anthracycline-based drug doxorubicin via copolymerization of DMA with a protected carbazate monomer (bocSMA). Cell-specific targeting functionality was also introduced via copolymerization with a biotin-functional monomer (bioHEMA). Drug release of the hydrazone linked doxorubicin was evaluated as function of pH and serum and chemotherapeutic activity was evaluated in SKOV3 ovarian cancer cells.

Dynamic intracellular delivery of antibiotics via pH-responsive polymersomes

Reversible addition-fragmentation chain transfer (RAFT) polymerization was employed to prepare a series of copolymers consisting of 2-hdroxyethyl methacrylate (HEMA) and poly(ethylene glycol) methyl ether methacrylate (FWavg ~ 950 Da) (O950) with variable comonomer compositions and molecular weights for use as polymeric scaffolds. Reactivity ratios for the monomer pair were determined to be 1.37 and 0.290 respectively. To these scaffolds trithiocarbonate-based RAFT chain transfer agents (CTAs) were grafted using carbodiimide chemistry. The resultant graft chain transfer agents (gCTA) were subsequently employed to polymerize dimethylaminoethyl methacrylate (DMAEMA) and (HPMA) between degrees of polymerization (DP) of 25 and 200. Kinetic analysis for the polymerization of DMAEMA targeting a DP of 100 from a 34 arm graft gCTA show linear Mn conversion and pseudo first order rate plots with narrow molecular weight distributions that move toward lower elution volumes with monomer conversion. Đ values for these polymerizations remain low at around 1.20 at monomer conversions as high as 70 %. pH-responsive endosomalytic brushes capable of spontaneously self-assembling into polymersomes were synthesized and a combination of dynamic light scattering (DLS), cryoTEM, and red blood cell hemolysis were employed to evaluate the aqueous solution properties of the polymeric brush as a function of pH. Successful encapsulation of ceftazidime and pH-dependent drug release properties were confirmed by HPLC. Intracellular antibiotic activity of the drug-loaded polymersomes was confirmed in a macrophage coculture model of infection with B. thailandensis and RAW 264.7 cells.

Preparation and UCST-type phase behavior of glycopolypeptides in alcoholic solvents

Glycopolypeptides with mannose pendants exhibited a reversible UCST-type phase behavior in various alcoholic solvents. The solution phase transition temperature was related to the solvent, concentration, main-chain length, and side-chain composition.

Degradable ketal-based block copolymer nanoparticles for anticancer drug delivery: a systematic evaluation

Low solubility of potent (anticancer) drugs is a major driving force for the development of noncytotoxic, stimuli-responsive nanocarriers, including systems based on amphiphilic block copolymers. In this regard, we investigated the potential of block copolymers based on 2-hydroxyethyl acrylate (HEA) and the acid-sensitive ketal-containing monomer (2,2-dimethyl-1,3-dioxolane-4-yl)methyl acrylate (DMDMA) to form responsive drug nanocarriers. Block copolymers were successfully synthesized by sequential reversible addition-fragmentation chain transfer (RAFT) polymerization, in which we combined a hydrophilic poly(HEA)x block with a (responsive) hydrophobic poly(HEAm-co-DMDMAn)y copolymer block. The DMDMA content of the hydrophobic block was systematically varied to investigate the influence of polymer design on physicochemical properties and in vitro biological performance. We found that a DMDMA content higher than 11 mol % is required for self-assembly behavior in aqueous medium. All particles showed colloidal stability in PBS at 37 °C for at least 4 days, with sizes ranging from 23 to 338 nm, proportional to the block copolymer DMDMA content. Under acidic conditions, the nanoparticles decomposed into soluble unimers, of which the decomposition rate was inversely proportional to the block copolymer DMDMA content. Flow cytometry and confocal microscopy showed dose-dependent, active in vitro cellular uptake of the particles loaded with hydrophobic octadecyl rhodamine B chloride (R18). The block copolymers showed no intrinsic in vitro cytotoxicity, while loaded with paclitaxel (PTX), a significant decrease in cell viability was observed comparable or better than the two commercial PTX nanoformulations Abraxane and Genexol-PM at equal PTX dose. This systematic approach evaluated and showed the potential of these block copolymers as nanocarriers for hydrophobic drugs.

Divergent Mechanistic Avenues to an Aliphatic Polyesteracetal or Polyester from a Single Cyclic Esteracetal

The cyclic esteracetal 2-methyl-1,3-dioxane-4-one (MDO) was polymerized in bulk using diethyl zinc as the catalyst and benzyl alcohol as the initiator to yield either the corresponding polyesteracetal (PMDO) or the aliphatic polyester poly(3-hydroxypropionic acid) (PHPA) at low and high catalyst concentrations, respectively. Spectral analysis gave evidence for distinct propagating species in the two catalyst concentration regimes. At low zinc concentrations ring opening by attack of the initiating species at the acetal functionality, yielding a zinc carboxylate, followed by propagation to yield pure PMDO was implicated. At high zinc concentrations we propose that ring opening via attack at the ester functionality produced a labile zinc hemiacetal, which rapidly and irreversibly expelled acetaldehyde to form a propagating zinc alkoxide and ultimately pure PHPA. Initial rate studies indicated that the rate of PHPA formation had a second-order dependence on zinc concentration; in contrast, the rate of PMDO formation was first order in zinc concentration. High molar mass PMDO exhibited only a glass transition temperature (T_g) ≈ -30 °C, whereas high molar mass PHPA had a T_g ≈ -30 °C and a melting temperature (T_m) ≈ 77 °C. When PHPA and PMDO were subjected to neutral or slightly acidic environments, PMDO exhibited expedited degradation as compared with PHPA.

Synthesis and Aggregation of Double Hydrophilic Diblock Glycopolymers via Aqueous SET-LRP

A chemically unprotected mannose-containing acrylate (ManA) monomer was synthesized and polymerized by Cu(0)-mediated radical polymerization in water (SET-LRP). One-pot block copolymerization was achieved upon addition of a solution of N-isopropylacrylamide (NIPAm) or diethylene glycol ethyl ether acrylate (DEGEEA) forming thermoresponsive double hydrophilic diblock glycopolymers which revealed self-assembly properties in aqueous solution forming well-defined, sugar-decorated nanoparticles.

Multi-targeted inhibition of tumor growth and lung metastasis by redox-sensitive shell crosslinked micelles loading disulfiram

Metastasis, the main cause of cancer related deaths, remains the greatest challenge in cancer treatment. Disulfiram (DSF), which has multi-targeted anti-tumor activity, was encapsulated into redox-sensitive shell crosslinked micelles to achieve intracellular targeted delivery and finally inhibit tumor growth and metastasis. The crosslinked micelles demonstrated good stability in circulation and specifically released DSF under a reductive environment that mimicked the intracellular conditions of tumor cells. As a result, the DSF-loaded redox-sensitive shell crosslinked micelles (DCMs) dramatically inhibited cell proliferation, induced cell apoptosis and suppressed cell invasion, as well as impairing tube formation of HMEC-1 cells. In addition, the DCMs could accumulate in tumor tissue and stay there for a long time, thereby causing significant inhibition of 4T1 tumor growth and marked prevention in lung metastasis of 4T1 tumors. These results suggested that DCMs could be a promising delivery system in inhibiting the growth and metastasis of breast cancer.

Stimuli-responsive cross-linked micelles for on-demand drug delivery against cancers

Stimuli-responsive cross-linked micelles (SCMs) represent an ideal nanocarrier system for drug delivery against cancers. SCMs exhibit superior structural stability compared to their non-cross-linked counterpart. Therefore, these nanocarriers are able to minimize the premature drug release during blood circulation. The introduction of environmentally sensitive cross-linkers or assembly units makes SCMs responsive to single or multiple stimuli present in tumor local microenvironment or exogenously applied stimuli. In these instances, the payload drug is released almost exclusively in cancerous tissue or cancer cells upon accumulation via enhanced permeability and retention effect or receptor mediated endocytosis. In this review, we highlight recent advances in the development of SCMs for cancer therapy. We also introduce the latest biophysical techniques, such as electron paramagnetic resonance (EPR) spectroscopy and fluorescence resonance energy transfer (FRET), for the characterization of the interactions between SCMs and blood proteins.

Chitosan-based nanocarriers with pH and light dual response for anticancer drug delivery

Currently, the major challenge for cancer treatment is to develop new types of smart nanocarriers that can efficiently retain the encapsulated drug during blood circulation and quickly release the drug in tumor cells under stimulation. In this study, the dual pH-/light-responsive cross-linked polymeric micelles (CPM) were successfully prepared by the self-assembly of amphiphilic glycol chitosan-o-nitrobenzyl succinate conjugates (GC-NBSCs) and then cross-linking with glutaraldehyde (GA), which was synthesized by grafting hydrophobic light-sensitive o-nitrobenzyl succinate (NBS) onto the main chain of hydrophilic glycol chitosan (GC). The GC-NBSC CPMs exhibited good biocompatibility according to the MTT assay against NIH/3T3 cells. The cell viability was maintained higher than 75% after 24 h incubation with CPMs even at a high concentration of 1.0 mg mL(-1). The hydrophobic anticancer drug camptothecin (CPT) was selected as a model drug and loaded into GC-NBSC CPMs. The results of in vitro evaluation showed that the encapsulated CPT could be quickly released at low pH with the light irradiation. Meanwhile, the CPT-loaded CPMs displayed a better cytotoxicity against MCF-7 cancer cells under UV irradiation, and IC50 of the loaded CPT was as low as 2.3 μg mL(-1), which was close to that of the free CPT (1.5 μg mL(-1)). Furthermore, the flow cytometry and confocal laser scanning microscopy (CLSM) measurements confirmed that the CPT-loaded CPMs could be internalized by MCF-7 cells efficiently and release CPT inside the tumor cells to enhance the inhibition of cell proliferation. Thereby, such excellent GC-NBSC CPMs provide a favorable platform to construct smart drug delivery systems (DDS) for cancer therapy.

Stimulus-sensitive polymeric nanoparticles and their applications as drug and gene carriers

Polymeric nanoparticles are promising candidates as drug and gene carriers. Among polymeric nanoparticles, those that are responsive to internal or external stimuli are of greater interest because they allow more efficient delivery of therapeutics to pathological regions. Stimulus-sensitive polymeric nanoparticles have been fabricated based on numerous nanostructures, including micelles, vesicles, crosslinked nanoparticles, and hybrid nanoparticles. The changes in chemical or physical properties of polymeric nanoparticles that occur in response to single, dual, or multiple stimuli endow these nanoparticles with the ability to retain cargoes during circulation, target the pathological region, and release their cargoes after cell internalization. This Review focuses on the most recent developments in the preparation of stimulus-sensitive polymeric nanoparticles and their applications in drug and gene delivery.

Reversibly crosslinked nanocarriers for on-demand drug delivery in cancer treatment

Polymer micelles have proven to be one of the most versatile nanocarriers for anticancer drug delivery. However, the in vitro and in vivo stability of micelles remains a challenge due to the dynamic nature of these self-assembled systems, which leads to premature drug release and nonspecific biodistribution in vivo. Recently, reversibly crosslinked micelles have been developed to provide solutions to stabilize nanocarriers in blood circulation. Increased stability allows nanoparticles to accumulate at tumor sites efficiently via passive and/or active tumor targeting, while cleavage of the micelle crosslinkages, through internal or external stimuli, facilitates on-demand drug release. In this review, various crosslinking chemistries as well as the choices for reversible linkages in these nanocarriers will be introduced. Then, the development of reversibly crosslinked micelles for on-demand drug release in response to single or dual stimuli in the tumor microenvironment is discussed, for example, acidic pH, reducing microenvironment, enzymatic microenvironment, photoirradiation and the administration of competitive reagents postmicelle delivery.