Immobilization of Candida antarctica lipase B on Polystyrene Nanoparticles

Recent Advances in Applications of Oxidases and Peroxidases Polymer-Based Enzyme Biocatalysts in Sensing and Wastewater Treatment: A Review

Oxidase and peroxidase enzymes have attracted attention in various biotechnological industries due to their ease of synthesis, wide range of applications, and operation under mild conditions. Their applicability, however, is limited by their poor stability in harsher conditions and their non-reusability. As a result, several approaches such as enzyme engineering, medium engineering, and enzyme immobilization have been used to improve the enzyme properties. Several materials have been used as supports for these enzymes to increase their stability and reusability. This review focusses on the immobilization of oxidase and peroxidase enzymes on metal and metal oxide nanoparticle-polymer composite supports and the different methods used to achieve the immobilization. The application of the enzyme-metal/metal oxide-polymer biocatalysts in biosensing of hydrogen peroxide, glucose, pesticides, and herbicides as well as blood components such as cholesterol, urea, dopamine, and xanthine have been extensively reviewed. The application of the biocatalysts in wastewater treatment through degradation of dyes, pesticides, and other organic compounds has also been discussed.

Biocatalytic selective acylation of technical lignins: a new route for the design of new biobased additives for industrial formulations

In this article, we describe a proof of concept of the potential use of a biocatalytic process for the functionalization of technical soda lignins from wheat straw through the selective acylation of primary hydroxy groups of lignin oligomers by acetate or hexanoate, thus preserving their free, unreacted phenols. The selectivity and efficiency of the method, although they depend on the structural complexity of the starting material, have been proven on model compounds. Applied to technical lignins, the acylation yield is only moderate, due to structural and chemical features induced by the industrial mode of preparation of the lignins rather than to the lack of efficiency of the method. However, most of the physicochemical properties of the lignins, including their antioxidant potential, are preserved, advocating the potential use of these modified lignins for industrial applications.

Climatic Chamber Stability Tests of Lipase-Catalytic Octyl-Sepharose Systems

The application of the climatic chamber presented in this paper to assess the storage stability of immobilized lipases is a new approach characterized by the potential of unifying the study conditions of biocatalysts created in various laboratories. The data achieved from storing lipases in the climatic chambers may be crucial for the chemical and pharmaceutical industry. Our paper describes the developed protocols for immobilization via interfacial activation of lipase B from Candida antarctica (CALB) and lipase OF from Candida rugosa (CRL-OF) on the Octyl-Sepharose CL-4B support. Optimization included buffers with different pH values of 4–9 and a wide range of ionic strength from 5 mM to 700 mM. It has been shown that the optimal medium for the CALB immobilization process on the tested support is a citrate buffer at pH 4 and high ionic strength of 500 mM. Implementing new optimal procedures enabled the hyperactivation of immobilized CALB (recovery activity 116.10 ± 1.70%) under the applicable reaction conditions using olive oil as a substrate. Importantly, CALB storage stability tests performed in a climatic chamber under drastic temperature and humidity conditions proved good stability of the developed biocatalyst (residual activity 218 ± 7.3% of dry form, after 7 days). At the same time, the low storage stability of CRL OF in a climatic chamber was demonstrated. It should be emphasized that the use of a climatic chamber to test the storage stability of a dry form of the studied lipases immobilized on Octyl-Sepharose CL-4B is, to our knowledge, described for the first time in the literature.

Magnetic Nanoplatforms for Covalent Protein Immobilization Based on Spy Chemistry

Immobilization of proteins on magnetic nanoparticles (MNPs) is an effective approach to improve protein stability and facilitate separation of immobilized proteins for repeated use. Herein, we exploited the efficient SpyTag-SpyCatcher chemistry for conjugation of functional proteins onto MNPs and established a robust magnetic-responsive nanoparticle platform for protein immobilization. To maximize the loading capacity and achieve outstanding water dispersity, the SpyTag peptide was incorporated into the surface-charged polymers of MNPs, which provided abundant active sites for Spy chemistry while maintaining excellent colloidal stability in buffer solution. Conjugation between enhanced green fluorescence protein (EGFP)-SpyCatcher-fused proteins and SpyTag-functionalized MNPs was efficient at ambient conditions without adding enzymes or chemical cross-linkers. Benefiting from the excellent water dispersity and interface compatibility, the surface Spy reaction has fast kinetics, which is comparable to that of the solution Spy reaction. No activity loss was observed on EGFP after conjugation due to the site-selective nature of Spy chemistry. The immobilization process of EGFP on MNPs was highly specific and robust, which was not affected by the presence of other proteins and detergents, such as bovine serum albumin and Tween 20. The MNP platform was demonstrated to be protective to the conjugated EGFP and significantly improved the shelf life of immobilized proteins. In addition, experiments confirmed the retained magnetophoresis of the MNP after protein loading, demonstrating fast MNP recovery under an external magnetic field. This MNP is expected to provide a versatile and modular platform to achieve effective and specific immobilization of other functional proteins, enabling easy reuse and storage.

Submicro- and nanoplastics: How much can be expected in water bodies?

Plastic particles smaller than 1 μm are considered to be highly dangerous pollutants due to their ability to penetrate living cells. Model experiments on the toxicity of plastics should be correlated with actual concentrations of plastics in natural water. We simulated the natural destruction of polystyrene, polyvinyl chloride, and poly(methyl methacrylate) in experiments on the abrasion of plastics with small stones. The plastics were dyed in mass with a fluorescent dye, which made it possible to distinguish plastic particles from stone fragments. We found that less than 1% of polystyrene and polyvinyl chloride were converted to submicron size particles. In the case of more rigid poly(methyl methacrylate), the fraction of such particles reaches 11%. The concentration of particles with a diameter less than 1 μm in the model experiments was from 0.7 (polystyrene) to 13 mg/L (poly(methyl methacrylate)), and when transferring the obtained data to real reservoirs, these values should be reduced by several orders of magnitude. These data explain the difficulties associated with the search for nanoplastics in natural waters. The toxicity of such particles to hydrobionts in model experiments was detected for concentrations greater than 1 mg/L, which is unrealistic in nature. Detectable and toxic amounts of nano- and submicron plastic particles in living organisms can be expected only in the case of filter-feeding organisms, such as molluscs, krill, sponges, etc.

Immobilization of Candida antarctica Lipase on Nanomaterials and Investigation of the Enzyme Activity and Enantioselectivity

This study defines the lipase immobilization protocol and enzymatic kinetic resolution of 1-phenyl ethanol with the use of immobilized lipases (LI) as a biocatalyst. Commercially available lipase Candida antarctica B (Cal-B) was immobilized onto graphene oxide (GO), iron oxide (Fe₃O₄) nanoparticles, and graphene oxide/iron oxide (GO/Fe₃O₄) nanocomposites. Characterization of pure and enzyme-loaded supports was carried out by scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy. The influences of pH, temperature, immobilization time, crosslinker concentration, glutaraldehyde (GLA), epichlorohydrin (EPH), and surfactant concentrations (Tween 80 and Triton X-100) on the catalytic activity were evaluated for these three immobilized biocatalysts. The highest immobilized enzyme activities were 15.03 U/mg, 14.72 U/mg, and 13.56 U/mg for GO-GLA-CalB, Fe₃O₄-GLA-CalB, and GO/Fe₃O₄-GLA-CalB, respectively. Moreover, enantioselectivity and reusability of these immobilized lipases were compared for the kinetic resolution of 1-phenyl ethanol, using toluene as organic solvent and vinyl acetate as acyl donor. The highest values of enantiomeric excess (ee_s = 99%), enantioselectivity (E = 507.74), and conversion (c = 50.73%) were obtained by using lipase immobilized onto graphene oxide (GO-GLA-CalB). It was obtained that this enzymatic process may be repeated five times without important loss of enantioselectivity.

Lipase-Catalyzed Transamidation of Urethane-Bond-Containing Ester

Significant improvement in mechanical properties and shape recovery in polyurethanes can be obtained by cross-linking, usually performed in a traditional chemical fashion. Here, we report model studies of enzymatic transamidations of urethane-bond-containing esters to study the principles of an enzymatic build-up of covalent cross-linked polyurethane networks via amide bond formation. The Lipase-catalyzed transamidation reaction of a urethane-bond-containing model ester ethyl 2-(hexylcarbamoyloxy)propanoate with various amines is discussed. A side product was formed, that could be successfully identified, and its synthesis reduced to a minimum (<1%). Furthermore, a noncatalyzed transamidation that is performed without CalB as the catalyst could be observed. Both observations are due to the known high reactivity of amines with urethane bonds.

Characterization of non-covalent immobilized Candida antartica lipase b over PS-b-P4VP as a model bio-reactive porous interface

The design of interfaces that selectively react with molecules to transform them into compounds of industrial interest is an emerging area of research. An example of such reactions is the hydrolytic conversion of ester-based molecules to lipids and alcohols, which is of interest to the food, and pharmaceutical industries. In this study, a functional bio-interfaced layer was designed to hydrolyze 4-nitrophenyl acetate (pNPA) and Ricinus Communis (castor) oil rich in triglycerides using lipase b from Candida antarctica (CALB, EC 3.1.1.3). The attachment of CALB was performed via non-covalent immobilization over a polymer film of vertically aligned cylinders that resulted from the self-assembly of the di-block copolymer polystyrene-block-poly(4-vinyl pyridine) (PS-b-P4VP). This polymer-lipase model will serve as the groundwork for the design of further bioactive layers for separation applications requiring similar hydrolytic processes. Results from the fabricated functional bio-interfaced material include cylinders with featured pore size of 19 nm, d spacing of 34 nm, and ca. 40 nm of thickness. The polymer-enzyme layers were physically characterized using AFM, XPS, and FTIR. The immobilized enzyme was able to retain 91% of the initial enzymatic activity when using 4-nitrophenyl acetate (pNPA) and 78% when exposed to triglycerides from castor oil.

Enzyme Immobilization on Metal-Organic Framework (MOF): Effects on Thermostability and Function

MOFs are porous materials with adjustable porosity ensuing a tenable surface area and stability. MOFs consist of metal containing joint where organic ligands are linked with coordination bonding rendering a unique architecture favouring the diverse applications in attachment of enzymes, Chemical catalysis, Gases storage and separation, biomedicals. In the past few years immobilization of soluble enzymes on/in MOF has been the topic of interest for scientists working in diverse field. The activity of enzyme, reusability, storage, chemical and thermal stability, affinity with substrate can be greatly improved by immobilizing of enzyme on MOFs. Along with improvement in enzymes properties, the high loading of enzyme is also observed while using MOFs as immobilization support. In this review a detail study of immobilization on/in Metalorganic Frameworks (MOFs) have been described. Furthermore, strategies for the enzyme immobilization on MOFs and resulting in improved catalytic performance of immobilized enzymes have been reported.

Immobilization studies of Candida Antarctica lipase B on gallic acid resin-grafted magnetic iron oxide nanoparticles

Purpose: Here, we present the successful preparation of a highly efficient gallic acid resin grafted with magnetic nanoparticles (MNPs) and containing a branched brush polymeric shell. Methods: Using a convenient co-precipitation method, we prepared Fe3O4 nanoparticles stabilized by citric acid. These nanoparticles underwent further silica modification and amino functionalization followed by gallic acid functionalization on their surface. Under alkaline conditions, we used a condensation reaction that combined formaldehyde and gallic, to graft the gallic acid-formaldehyde resin on the surface. We then evaluated the polymer-grafted MNPs to assay the Candida Antarctica B lipase(Cal-B) immobilization via physical adsorption. Conclusion: Furthermore, during optimization of parameters that defined conditions of immobilization, we found that the optimum immobilization was achieved in 15 mins. Also, optimal immobilization temperature and pH were 38ºC and 7.5, respectively. In addition, the reusability study of immobilized lipase polymer-grafted MNPs was done by isolating the MNPs from the reaction medium using magnetic separation, which showed that grafted MNPs reached 5 cycles with 91% activity retention.

Production of trans-free interesterified fat using indigenously immobilized lipase

Enzymatic interesterification was carried out between high-oleic canola oil and fully hydrogenated soybean oil using indigenously immobilized Thermomyces lanuginosus lipas substrate concentration, moisture content of enzyme, and enzyme load. Interesterification resulted in a decrease in the concentration of tri-unsaturated and trisaturated TAG and an increase of mono- and di-saturated TAG as observed by reversed-phase HPLC. The alteration in TAG composition and the presence of new TAG species after interesterification was correlated with extended plasticity characterized by lower slip melting point with a significant change in functionality and consistency of the interesterified product. Thermal and structural properties of the blends before and after interesterification were assessed by differential scanning calorimetry (DSC), X-ray diffraction and polarized light microscopy. Trans-fat analysis indicated the absence of any trans fatty acid in the final interesterified product. The resultant interesterified products with varying slip melting points can be used in the formulation of healthier fat and oil products and address a critical industrial demand for trans free formulations for base-stocks of spreads, margarines, and confectionary fats.

Engineered nanomaterials and human health: Part 1. Preparation, functionalization and characterization (IUPAC Technical Report)

Nanotechnology is a rapidly evolving field, as evidenced by the large number of publications on the synthesis, characterization, and biological/environmental effects of new nano-sized materials. The unique, size-dependent properties of nanomaterials have been exploited in a diverse range of applications and in many examples of nano-enabled consumer products. In this account we focus on Engineered Nanomaterials (ENM), a class of deliberately designed and constructed nano-sized materials. Due to the large volume of publications, we separated the preparation and characterisation of ENM from applications and toxicity into two interconnected documents. Part 1 summarizes nanomaterial terminology and provides an overview of the best practices for their preparation, surface functionalization, and analytical characterization. Part 2 (this issue, Pure Appl. Chem. 2018; 90(8): 1325–1356) focuses on ENM that are used in products that are expected to come in close contact with consumers. It reviews nanomaterials used in therapeutics, diagnostics, and consumer goods and summarizes current nanotoxicology challenges and the current state of nanomaterial regulation, providing insight on the growing public debate on whether the environmental and social costs of nanotechnology outweigh its potential benefits.

Comparison of Candida antarctica Lipase B Variants for Conversion of ε-Caprolactone in Aqueous Medium-Part 2

Enzyme-catalyzed ring-opening polymerization of lactones is a method of increasing interest for the synthesis of polyesters. In the present work, we investigated which changes in the structure of Candida antarctica lipase B (CaLB) shift the catalytic equilibrium between esterification and hydrolysis towards polymerization. Therefore, we present two concepts: (i) removing the glycosylation of CaLB to increase the surface hydrophobicity; and (ii) introducing a hydrophobic lid adapted from Pseudomonas cepacia lipase (PsCL) to enhance the interaction of a growing polymer chain to the elongated lid helix. The deglycosylated CaLB (CaLB-degl) was successfully generated by site-saturation mutagenesis of asparagine 74. Furthermore, computational modeling showed that the introduction of a lid helix at position Ala148 was structurally feasible and the geometry of the active site remained intact. Via overlap extension PCR the lid was successfully inserted, and the variant was produced in large scale in Pichia pastoris with glycosylation (CaLB-lid) and without (CaLB-degl-lid). While the lid variants show a minor positive effect on the polymerization activity, CaLB-degl showed a clearly reduced hydrolytic and enhanced polymerization activity. Immobilization in a hydrophobic polyglycidol-based microgel intensified this effect such that a higher polymerization activity was achieved, compared to the "gold standard" Novozym® 435.

Nano-Immobilized Biocatalysts for Biodiesel Production from Renewable and Sustainable Resources

The cost of biodiesel production relies on feedstock cost. Edible oil is unfavorable as a biodiesel feedstock because of its expensive price. Thus, non-edible crop oil, waste oil, and microalgae oil have been considered as alternative resources. Non-edible crop oil and waste cooking oil are more suitable for enzymatic transesterification because they include a large amount of free fatty acids. Recently, enzymes have been integrated with nanomaterials as immobilization carriers. Nanomaterials can increase biocatalytic efficiency. The development of a nano-immobilized enzyme is one of the key factors for cost-effective biodiesel production. This paper presents the technology development of nanomaterials, including nanoparticles (magnetic and non-magnetic), carbon nanotubes, and nanofibers, and their application to the nano-immobilization of biocatalysts. The current status of biodiesel production using a variety of nano-immobilized lipase is also discussed.

Enzymatic Synthesis of Biobased Polyesters and Polyamides

Nowadays, "green" is a hot topic almost everywhere, from retailers to universities to industries; and achieving a green status has become a universal aim. However, polymers are commonly considered not to be "green", being associated with massive energy consumption and severe pollution problems (for example, the "Plastic Soup") as a public stereotype. To achieve green polymers, three elements should be entailed: (1) green raw materials, catalysts and solvents; (2) eco-friendly synthesis processes; and (3) sustainable polymers with a low carbon footprint, for example, (bio)degradable polymers or polymers which can be recycled or disposed with a gentle environmental impact. By utilizing biobased monomers in enzymatic polymerizations, many advantageous green aspects can be fulfilled. For example, biobased monomers and enzyme catalysts are renewable materials that are derived from biomass feedstocks; enzymatic polymerizations are clean and energy saving processes; and no toxic residuals contaminate the final products. Therefore, synthesis of renewable polymers via enzymatic polymerizations of biobased monomers provides an opportunity for achieving green polymers and a future sustainable polymer industry, which will eventually play an essential role for realizing and maintaining a biobased and sustainable society.

Coupled reactions on bioparticles: Stereoselective reduction with cofactor regeneration on PhaC inclusion bodies

Chiral alcohols are important building blocks for specialty chemicals and pharmaceuticals. The production of chiral alcohols from ketones can be carried out stereo selectively with alcohol dehydrogenases (ADHs). To establish a process for cost-effective enzyme immobilization on solid phase for application in ketone reduction, we used an established enzyme pair consisting of ADH from Rhodococcus erythropolis and formate dehydrogenase (FDH) from Candida boidinii for NADH cofactor regeneration and co-immobilized them on modified poly-p-hydroxybutyrate synthase (PhaC)-inclusion bodies that were recombinantly produced in Escherichia coli cells. After separate production of genetically engineered and recombinantly produced enzymes and particles, cell lysates were combined and enzymes endowed with a Kcoil were captured on the surface of the Ecoil presenting particles due to coiled-coil interaction. Enzyme-loaded particles could be easily purified by centrifugation. Total conversion of 4'-chloroacetophenone to (S)-4-chloro-α-methylbenzyl alcohol could be accomplished using enzyme-loaded particles, catalytic amounts of NAD(+) and formate as substrates for FDH. Chiral GC-MS analysis revealed that immobilized ADH retained enantioselectivity with 99 % enantiomeric excess. In conclusion, this strategy may become a cost-effective alternative to coupled reactions using purified enzymes.

A biocatalytic approach towards sustainable furanic–aliphatic polyesters

A series of sustainable furanic–aliphatic polyesters and oligoesters is successfully producedvia Candida antarcticaLipase B-catalyzed polymerization of biobased dimethyl 2,5-furandicarboxylate with various (potentially) renewable aliphatic diols.

Enzyme-Catalyzed Synthesis of Unsaturated Aliphatic Polyesters Based on Green Monomers from Renewable Resources

Bio-based commercially available succinate, itaconate and 1,4-butanediol are enzymatically co-polymerized in solution via a two-stage method, using Candida antarctica Lipase B (CALB, in immobilized form as Novozyme® 435) as the biocatalyst. The chemical structures of the obtained products, poly(butylene succinate) (PBS) and poly(butylene succinate-co-itaconate) (PBSI), are confirmed by ¹H- and ¹³C-NMR. The effects of the reaction conditions on the CALB-catalyzed synthesis of PBSI are fully investigated, and the optimal polymerization conditions are obtained. With the established method, PBSI with tunable compositions and satisfying reaction yields is produced. The ¹H-NMR results confirm that carbon-carbon double bonds are well preserved in PBSI. The differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA) results indicate that the amount of itaconate in the co-polyesters has no obvious effects on the glass-transition temperature and the thermal stability of PBS and PBSI, but has significant effects on the melting temperature.

One-Pot Cascade Synthetic Strategy: A Smart Combination of Chemoenzymatic Transesterification and Raft Polymerization

Enzymatic transesterification was combined with RAFT polymerization to develop a new one-pot synthetic method for new polymer synthesis. This method contained in situ monomer transformation reaction between acyl donor monomer and primary alcohols such as hexanol and so on, followed by subsequent RAFT polymerization to get target polymers. The enzymatic reaction and RAFT polymerization tolerated each other and cooperated well to get new polymers with a completely transformed new monomer, high polymer yields, excellent control over the polymerization process, and good enzyme activity maintenance, providing a general and straightforward methodology for new polymer synthesis and modification.

Dialysis nanoprecipitation of polystyrene nanoparticles

Using a facile dialysis nanoprecipitation method, nanoparticles of several hundred nanometers have been successfully generated from a "traditional," non-biodegradable polymer, that is, polystyrene. The effect of initial polymer concentration inside the dialysis membrane, as well as the polymer/solvent system and the ionic strength (electrolyte concentration) of the dialysis solution, on nanoparticle size is examined. A nucleation-aggregation mechanism has been provided to explain the observed trends. Furthermore, we determine the zeta potential as a function of ionic strength for the generated nanoparticles and show that anionic charging may be present in the system.

Immobilization of biocatalysts for enzymatic polymerizations: possibilities, advantages, applications

Biotechnology also holds tremendous opportunities for realizing functional polymeric materials. Biocatalytic pathways to polymeric materials are an emerging research area with not only enormous scientific and technological promise, but also a tremendous impact on environmental issues. Many of the enzymatic polymerizations reported proceed in organic solvents. However, enzymes mostly show none of their profound characteristics in organic solvents and can easily denature under industrial conditions. Therefore, natural enzymes seldom have the features adequate to be used as industrial catalysts in organic synthesis. The productivity of enzymatic processes is often low due to substrate and/or product inhibition. An important route to improving enzyme performance in non-natural environments is to immobilize them. In this review we will first summarize some of the most prominent examples of enzymatic polymerizations and will subsequently review the most important immobilization routes that are used for the immobilization of biocatalysts relevant to the field of enzymatic polymerizations.

Immobilized Candida antarctica lipase B: Hydration, stripping off and application in ring opening polyester synthesis

This work reviews the stripping off, role of water molecules in activity, and flexibility of immobilized Candida antarctica lipase B (CALB). Employment of CALB in ring opening polyester synthesis emphasizing on a polylactide is discussed in detail. Execution of enzymes in place of inorganic catalysts is the most green alternative for sustainable and environment friendly synthesis of products on an industrial scale. Robust immobilization and consequently performance of enzyme is the essential objective of enzyme application in industry. Water bound to the surface of an enzyme (contact class of water molecules) is inevitable for enzyme performance; it controls enzyme dynamics via flexibility changes and has intensive influence on enzyme activity. The value of pH during immobilization of CALB plays a critical role in fixing the active conformation of an enzyme. Comprehensive selection of support and protocol can develop a robust immobilized enzyme thus enhancing its performance. Organic solvents with a log P value higher than four are more suitable for enzymatic catalysis as these solvents tend to strip away very little of the enzyme surface bound water molecules. Alternatively ionic liquid can work as a more promising reaction media. Covalent immobilization is an exclusively reliable technique to circumvent the leaching of enzymes and to enhance stability. Activated polystyrene nanoparticles can prove to be a practical and economical support for chemical immobilization of CALB. In order to reduce the E-factor for the synthesis of biodegradable polymers; enzymatic ring opening polyester synthesis (eROPS) of cyclic monomers is a more sensible route for polyester synthesis. Synergies obtained from ionic liquids and immobilized enzyme can be much effective eROPS.

Hydrophobic surface induced activation of Pseudomonas cepacia lipase immobilized into mesoporous silica

Lipase from Pseudomonas cepacia (PCL) was successfully immobilized into siliceous mesocellular foams (MCFs) with various hydrophobic/hydrophilic surfaces. The catalytic performances of immobilized PCL were investigated using the transesterification reaction and hydrolytic reaction as model reactions. The specific activity of immobilized PCL greatly increased with enhanced surface hydrophobicity of MCFs, mainly because of lipase activation via hydrophobic interaction between alkyl groups in MCFs and the surface loop (so-called "lid") of PCL. Conformational changes of immobilized PCL were further investigated using time-resolved fluorescence spectroscopy with Trp as an intrinsic probe. When the immobilized PCL was suspended in phosphate buffer, short-lived τ(1) shortened and the fractional contribution of τ(1) significantly increased with the increasing level of surface hydrophobicity of MCFs. These results revealed that Trp(s) of the immobilized PCL were surrounded by a hydrophilic microenvironment because of the fact that the opened "lid" permitted the diffusion of water to the active site cleft. However, for the immobilized PCL suspended in n-hexane, long-lived τ(3) increased with the increase of surface hydrophobicity of MCFs. The reduced interaction between Trp(s) and the surrounding protein matrix was due to intercalation of n-hexane into the active site cleft when the lipase was in open conformation. The above results demonstrated that PCL immobilized into MCF with hydrophobic surfaces were in an activated open conformation.