Ether Bond Cleavage of a Phenylcoumaran β-5 Lignin Model Compound and Polymeric Lignin Catalysed by a LigE-type Etherase from Agrobacterium sp

A LigE-type beta-etherase enzyme from lignin-degrading Agrobacterium sp. has been identified, which assists degradation of polymeric lignins. Testing against lignin dimer model compounds revealed that it does not catalyse the previously reported reaction of Sphingobium SYK-6 LigE, but instead shows activity for a β-5 phenylcoumaran lignin dimer. The reaction products did not contain glutathione, indicating a catalytic role for reduced glutathione in this enzyme. Three reaction products were identified: the major product was a cis-stilbene arising from C-C fragmentation involving loss of formaldehyde; two minor products were an alkene arising from elimination of glutathione, and an oxidised ketone, proposed to arise from reaction of an intermediate with molecular oxygen. Testing of the recombinant enzyme against a soda lignin revealed the formation of new signals by two-dimensional NMR analysis, whose chemical shifts are consistent with the formation of a stilbene unit in polymeric lignin.

Biocatalytic selective acylation of technical lignins: a new route for the design of new biobased additives for industrial formulations

In this article, we describe a proof of concept of the potential use of a biocatalytic process for the functionalization of technical soda lignins from wheat straw through the selective acylation of primary hydroxy groups of lignin oligomers by acetate or hexanoate, thus preserving their free, unreacted phenols. The selectivity and efficiency of the method, although they depend on the structural complexity of the starting material, have been proven on model compounds. Applied to technical lignins, the acylation yield is only moderate, due to structural and chemical features induced by the industrial mode of preparation of the lignins rather than to the lack of efficiency of the method. However, most of the physicochemical properties of the lignins, including their antioxidant potential, are preserved, advocating the potential use of these modified lignins for industrial applications.

Tuning the functional properties of lignocellulosic films by controlling the molecular and supramolecular structure of lignin

This study investigated the relationships between lignin molecular and supramolecular structures and their functional properties within cellulose-based solid matrix, used as a model biodegradable polymer carrier. Two types of derivatives corresponding to distinct structuration levels were prepared from a single technical lignin sample (PB1000): phenol-enriched oligomer fractions and colloidal nanoparticles (CLP). The raw lignin and its derivatives were formulated with cellulose nanocrystals or nanofibrils to prepare films by chemical oxidation or pressure-assisted filtration. The films were tested for their water and lignin retention capacities, radical scavenging capacity (RSC) and antimicrobial properties. A structural investigation was performed by infrared, electron paramagnetic resonance spectroscopy and microscopy. The composite morphology and performance were controlled by both the composition and structuration level of lignin. Phenol-enriched oligomers were the compounds most likely to interact with cellulose, leading to the smoothest film surface. Their RSC in film was 4- to 6-fold higher than that of the other samples. The organization in CLP led to the lowest RSC but showed capacity to trap and stabilize phenoxy radicals. All films were effective against S. aureus (gram negative) whatever the lignin structure. The results show the possibility to tune the performances of these composites by exploiting lignin multi-scale structure.

Enhancing the Antioxidant Activity of Technical Lignins by Combining Solvent Fractionation and Ionic-Liquid Treatment

A grass soda technical lignin (PB1000) underwent a process combining solvent fractionation and treatment with an ionic liquid (IL), and a comprehensive investigation of the structural modifications was performed by using high-performance size-exclusion chromatography, 31 P NMR spectroscopy, thioacidolysis, and GC-MS. Three fractions with distinct reactivity were recovered from successive ethyl acetate (EA), butanone, and methanol extractions. In parallel, a fraction deprived of EA extractives was obtained. The samples were treated with methyl imidazolium bromide ([HMIM]Br) by using either conventional heating or microwave irradiation. The treatment allowed us to solubilize 28 % of the EA-insoluble fraction and yielded additional free phenols in all the fractions, as a consequence of depolymerization and demethylation. The gain of the combined process in terms of antioxidant properties was demonstrated through 2,2-diphenyl-1-picrylhydrazyl (DPPH. ) radical-scavenging tests. Integrating further IL safety-related data and environmental considerations, this study paves the way for the sustainable production of phenolic oligomers competing with commercial antioxidants.

Imidazolium-Based Ionic Liquids as Efficient Reagents for the C-O Bond Cleavage of Lignin

The demethylation of lignin in ionic liquids (ILs) was investigated by using pure lignin model monomers and dimers together with dioxane-isolated lignins from poplar, miscanthus, and maize. Different methylimidazolium ILs were compared and the samples were treated with two different heating processes: microwave irradiation and conventional heating in a sealed tube. The conversion yield and influence of the treatment on the lignin structure were assessed by ³¹ P NMR spectroscopy, size-exclusion chromatography, and thioacidolysis. The acidic methylimidazolium IL [HMIM]Br was shown to be an effective combination of solvent and reagent for the demethylation and depolymerization of lignin. The relatively mild reaction conditions, the clean work-up, and the ability to reuse the IL makes the described procedure an attractive and new green method for the conversion of lignin to produce phenol-rich lignin oligomers.

Control of flowering and cell fate by LIF2, an RNA binding partner of the polycomb complex component LHP1

Polycomb Repressive Complexes (PRC) modulate the epigenetic status of key cell fate and developmental regulators in eukaryotes. The chromo domain protein LIKE HETEROCHROMATIN PROTEIN1 (LHP1) is a subunit of a plant PRC1-like complex in Arabidopsis thaliana and recognizes histone H3 lysine 27 trimethylation, a silencing epigenetic mark deposited by the PRC2 complex. We have identified and studied an LHP1-Interacting Factor2 (LIF2). LIF2 protein has RNA recognition motifs and belongs to the large hnRNP protein family, which is involved in RNA processing. LIF2 interacts in vivo, in the cell nucleus, with the LHP1 chromo shadow domain. Expression of LIF2 was detected predominantly in vascular and meristematic tissues. Loss-of-function of LIF2 modifies flowering time, floral developmental homeostasis and gynoecium growth determination. lif2 ovaries have indeterminate growth and produce ectopic inflorescences with severely affected flowers showing proliferation of ectopic stigmatic papillae and ovules in short-day conditions. To look at how LIF2 acts relative to LHP1, we conducted transcriptome analyses in lif2 and lhp1 and identified a common set of deregulated genes, which showed significant enrichment in stress-response genes. By comparing expression of LHP1 targets in lif2, lhp1 and lif2 lhp1 mutants we showed that LIF2 can either antagonize or act with LHP1. Interestingly, repression of the FLC floral transcriptional regulator in lif2 mutant is accompanied by an increase in H3K27 trimethylation at the locus, without any change in LHP1 binding, suggesting that LHP1 is targeted independently from LIF2 and that LHP1 binding does not strictly correlate with gene expression. LIF2, involved in cell identity and cell fate decision, may modulate the activity of LHP1 at specific loci, during specific developmental windows or in response to environmental cues that control cell fate determination. These results highlight a novel link between plant RNA processing and Polycomb regulation.

Uracil salvage is necessary for early Arabidopsis development

Uridine nucleotides can be formed by energy-consuming de novo synthesis or by the energy-saving recycling of nucleobases resulting from nucleotide catabolism. Uracil phosphoribosyltransferases (UPRTs; EC 2.4.2.9) are involved in the salvage of pyrimidines by catalyzing the formation of uridine monophosphate (UMP) from uracil and phosphoribosylpyrophosphate. To date, UPRTs are described as non-essential, energy-saving enzymes. In the present work, the six genes annotated as UPRTs in the Arabidopsis genome are examined through phylogenetic and functional complementation approaches and the available T-DNA insertion mutants are characterized. We show that a single nuclear gene encoding a protein targeted to plastids, UPP, is responsible for almost all UPRT activity in Arabidopsis. The inability to salvage uracil caused a light-dependent dramatic pale-green to albino phenotype, dwarfism and the inability to produce viable progeny in loss-of-function mutants. Plastid biogenesis and starch accumulation were affected in all analysed tissues, with the exception of stomata. Therefore we propose that uracil salvage is of major importance for plant development.

High-level expression and characterization of Zea mays cytokinin oxidase/dehydrogenase in Yarrowia lipolytica

Cytokinin oxidase/dehydrogenase (CKO/CKX) is a flavoenzyme, which irreversibly inactivates cytokinins by severing the isoprenoid side chain from the adenine/adenosine moiety. There are several genes coding for the enzyme in maize (Zea mays). A Z. mays CKO1 cDNA was cloned in the yeast Yarrowia lipolytica to achieve heterologous protein expression. The recombinant ZmCKO1 was recovered from cultures of transformed yeasts and purified using several chromatographic steps. The enzyme was obtained as a homogeneous protein in a remarkably high-yield and its molecular and kinetic properties were characterized. The enzyme showed a molecular mass of 69 kDa, pI was 6.3. Neutral sugar content of the molecule was 22%. Absorption and fluorescence spectra were in accordance with the presence of FAD as a cofactor. Peptide mass fingerprinting using MALDI-MS correctly assigned the enzyme in MSDB protein database. The enzyme showed a relatively high degree of thermostability (T50=55 degrees C for 30 min incubation). The following pH optimum and K(m) values were determined for natural substrates (measured in the oxidase mode): pH 8.0 for isopentenyl adenine (K(m)=0.5 microM), pH 7.6 for isopentenyl adenosine (K(m)=1.9 microM), pH 7.9 for zeatin (K(m)=1.5 microM) and pH 7.3 for zeatin riboside (K(m)=2.0 microM). ZmCKO1, functioning in the oxidase mode, catalyzes the production of one molecule of H2O2 per one molecule of cytokinin substrate. This finding represents clear evidence for the existence of dual enzyme functionality (oxygen serves as a cosubstrate in the absence of better electron acceptors).

Maize cytokinin oxidase genes: differential expression and cloning of two new cDNAs

Cytokinin oxidases (CKOs) play a major role in the regulation of hormone levels in plants by irreversibly degrading cytokinins. Two new cDNAs from maize (CKO2 and CKO3) were cloned and CKO activity of a recombinant CKO3 enzyme was demonstrated. CKO2 and CKO3 encode flavoproteins with 93% identity among each other compared with 45% identity with CKO1. The respective genes were mapped to BIN 3.05/06 and BIN 8.06 which belong to duplicated regions of the maize genome. For a better understanding of the role of CKO2 and CKO3 in maize development, their expression profiles were analysed in different organs and during kernel development via semi-quantitative RT-PCR. Different spatial and temporal expression patterns were observed for the two genes, as well as for CKO1 and two additional genes CKO4 and CKO5. CKO2 to CKO5 genes were mainly expressed in vegetative tissues, with unique expression patterns. CKO1 was most strongly expressed in the kernel. All five genes were expressed at early stages of kernel development, a period when a peak in cytokinin levels and a high cell division rate in the endosperm have been described. However, each gene had its own expression profile with a major difference concerning the onset of expression.

Seedling lethality in Nicotiana plumbaginifolia conferred by Ds transposable element insertion into a plant-specific gene

A seedling lethal mutant of Nicotiana plumbaginifolia (sdl-1) was isolated by transposon tagging using a maize Dissociation (Ds) element. The insertion mutation was produced by direct co-transformation of protoplasts with two plasmids: one containing Ds and a second with an Ac transposase gene. sdl-1 seedlings exhibit several phenotypes: swollen organs, short hypocotyls in light and dark conditions, and enlarged and multinucleated cells, that altogether suggest cell growth defects. Mutant cells are able to proliferate under in vitro culture conditions. Genomic DNA sequences bordering the transposon were used to recover cDNA from the normal allele. Complementation of the mutant phenotype with the cDNA confirmed that the transposon had caused the mutation. The Ds element was inserted into the first exon of the open reading frame and the homozygous mutant lacked detectable transcript. Phenocopies of the mutant were obtained by an antisense approach. SDL-1 encodes a novel protein found in several plant genomes but apparently missingfrom animal and fungal genomes; the protein is highly conserved and has a potential plastid targeting motif.