Effect of Coordination on the Glucose-Responsiveness of PEG-b-(PAA-co-PAAPBA) Micelles

Injectable Gelled Multiple Emulsion for Glucose-Responsive Insulin Delivery

A glucose-responsive insulin delivery system that sustains blood glucose equilibrium for an extended duration can address the low therapeutic window of insulin in diabetes treatment. Herein, insulin is loaded in a water-in-oil-in-water (W1/O/W2) gelled multiple emulsion using poly (4-vinylphenylboronic acid) (PVPBA) homopolymer as an effective emulsifier. The gelled multiple emulsion exhibits a high encapsulation efficiency (99%), enhanced stability and remarkable shear-thinning behavior, making it easy to inject. Under hyperglycemic conditions, the gelled emulsion system instantly binds to glucose molecules and reduces the hydrogen bonds of the PVPBA homopolymer, resulting in insulin release. In a streptozotocin-induced type 1 diabetic mouse model, a single subcutaneous injection of the gelled emulsion rapidly responds to high blood glucose concentration (BGC) and release insulin in a glucose dependent manner, thus prolonging the antihyperglycemic effect compared with free insulin.

Injectable and Self-Adaptive Gel Scaffold Based on Heparin Microspheres for Adipogenesis of Human Adipose-Derived Stem Cells

An injectable and self-adaptive heparin microsphere-based cell scaffold was developed to achieve adipose regeneration. Simultaneously, the cell scaffold exhibited a dynamic architecture, self-regulated glucose levels, sustained insulin delivery, and steady viscoelastic properties for adipogenesis. The dynamic cell scaffold is cross-linked by the boronate-diol interaction among heparin-based microspheres, which have boronate and maltose groups. Because of the boronate-maltose ester bonds, the gelatinous complex would be partially dismantled and readily display glucose-sensitive performance by free glucose via competitive displacement. The dynamic cross-linking heparin microsphere scaffold can deliver the lipogenic drug insulin to enhance lipid filling, which has an impact on fat tissue enhancement. A 4-week in vitro cell culture demonstrated that the dynamic heparin microsphere-based cell scaffold, through loading with insulin, showed significantly higher efficiency in promoting ASC differentiation compared with traditional 3D culture methods. In vivo histological results further demonstrated that there was a significant increase in adipose in the proposed cell scaffold, which proved to be statistically significant compared with traditional biomaterials. Notable stain expression of the FABP4 and PPAR-γ genes was also observed in the dynamic cell scaffold containing insulin, which was more similar to natural fat.

Recent advances in responsive hydrogels for diabetic wound healing

Poor wound healing after diabetes mellitus remains a challenging problem, and its pathophysiological mechanisms have not yet been fully elucidated. Persistent bleeding, disturbed regulation of inflammation, blocked cell proliferation, susceptible infection and impaired tissue remodeling are the main features of diabetic wound healing. Conventional wound dressings, including gauze, films and bandages, have a limited function. They generally act as physical barriers and absorbers of exudates, which fail to meet the requirements of the whol diabetic wound healing process. Wounds in diabetic patients typically heal slowly and are susceptible to infection due to hyperglycemia within the wound bed. Once bacterial cells develop into biofilms, diabetic wounds will exhibit robust drug resistance. Recently, the application of stimuli-responsive hydrogels, also known as "smart hydrogels", for diabetic wound healing has attracted particular attention. The basic feature of this system is its capacities to change mechanical properties, swelling ability, hydrophilicity, permeability of biologically active molecules, etc., in response to various stimuli, including temperature, potential of hydrogen (pH), protease and other biological factors. Smart hydrogels can improve therapeutic efficacy and limit total toxicity according to the characteristics of diabetic wounds. In this review, we summarized the mechanism and application of stimuli-responsive hydrogels for diabetic wound healing. It is hoped that this work will provide some inspiration and suggestions for research in this field.

Glucose-Sensitive Core-Cross-Linked Nanoparticles Constructed with Polyphosphoester Diblock Copolymer for Controlling Insulin Delivery

This work aims to construct biocompatible, biodegradable core-cross-linked and insulin-loaded nanoparticles which are sensitive to glucose and release insulin via cleavage of the nanoparticles in a high-concentration blood glucose environment. First, a polyphosphoester-based diblock copolymer (PBYP-g-Gluc)-b-PEEP was prepared via ring-opening copolymerization (ROP) and the copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) in which PBYP and PEEP represent the polymer segments from 2-(but-3-yn-1-yloxy)-2-oxo-1,3,2-dioxaphospholane and 2-ethoxy-2-oxo-1,3,2-dioxaphospholane, respectively, and Gluc comes from 2-azidoethyl-β-d-glucopyranoside (Gluc-N3) that grafted with PBYP. The structure and molecular weight of the copolymer were characterized by 1H NMR, 31P NMR, GPC, FT-IR, and UV-vis measurements. The amphiphilic copolymer could self-assemble into core-shell uncore-cross-linked nanoparticles (UCCL NPs) in aqueous solutions and form core-cross-linked nanoparticles (CCL NPs) after adding cross-linking agent adipoylamidophenylboronic acid (AAPBA). Dynamic light scattering (DLS) and transmission electron microscopy (TEM) were used to study the self-assembly behavior of the two kinds of NPs and the effect of different Gluc group contents on the size of NPs further to verify the stability and glucose sensitivity of CCL NPs. The ability of NPs to load fluorescein isothiocyanate-labeled insulin (FITC-insulin) and their glucose-triggered release behavior were detected by a fluorescence spectrophotometer. The results of methyl thiazolyl tetrazolium (MTT) assay and hemolysis activity experiments showed that the CCL NPs had good biocompatibility. An in vivo hypoglycemic study has shown that FITC-insulin-loaded CCL NPs could reduce blood glucose and have a protective effect on hypoglycemia. This research provides a new method for constructing biodegradable and glucose-sensitive core-cross-linked nanomedicine carriers for controlled insulin release.

Hyaluronic Acid Hydrogels Crosslinked in Physiological Conditions: Synthesis and Biomedical Applications

Hyaluronic acid (HA) hydrogels display a wide variety of biomedical applications ranging from tissue engineering to drug vehiculization and controlled release. To date, most of the commercially available hyaluronic acid hydrogel formulations are produced under conditions that are not compatible with physiological ones. This review compiles the currently used approaches for the development of hyaluronic acid hydrogels under physiological/mild conditions. These methods include dynamic covalent processes such as boronic ester and Schiff-base formation and click chemistry mediated reactions such as thiol chemistry processes, azide-alkyne, or Diels Alder cycloaddition. Thermoreversible gelation of HA hydrogels at physiological temperature is also discussed. Finally, the most outstanding biomedical applications are indicated for each of the HA hydrogel generation approaches.

Glucose-Responsive Insulin and Delivery Systems: Innovation and Translation

Type 1 and advanced type 2 diabetes treatment involves daily injections or continuous infusion of exogenous insulin aimed at regulating blood glucose levels in the normoglycemic range. However, current options for insulin therapy are limited by the risk of hypoglycemia and are associated with suboptimal glycemic control outcomes. Therefore, a range of glucose-responsive components that can undergo changes in conformation or show alterations in intermolecular binding capability in response to glucose stimulation has been studied for ultimate integration into closed-loop insulin delivery or "smart insulin" systems. Here, an overview of the evolution and recent progress in the development of molecular approaches for glucose-responsive insulin delivery systems, a rapidly growing subfield of precision medicine, is presented. Three central glucose-responsive moieties, including glucose oxidase, phenylboronic acid, and glucose-binding molecules are examined in detail. Future opportunities and challenges regarding translation are also discussed.

Glucose-Sensitive Nanoparticles Based On Poly(3-Acrylamidophenylboronic Acid-Block-N-Vinylcaprolactam) For Insulin Delivery

BACKGROUND

Compared with random copolymers, block copolymerization is easier to prepare for nanoparticles with core-shell structure, and they will have better glucose sensitivity and higher insulin loading.

PURPOSE

In our study, insulin-loaded poly (3-acrylamidophenylboronic acid-block-N-vinyl caprolactam) p(AAPBA-b-NVCL) nanoparticles were successfully prepared and were glucose-sensitive, which could effectively lower the blood sugar levels within 72 hrs.

METHODS

The polymer of p(AAPBA-b-NVCL) was produced by reversible addition-fragmentation chain transfer polymerization based on different ratios of 3-acrylamidophenylboronic acid (AAPBA) and N-vinylcaprolactam (NVCL), and its structure was discussed by Fourier transform infrared spectroscopy and 1H-nuclear magnetic resonance . Next, the polymer was manufactured into the nanoparticles, and the characteristics of nanoparticles were detected by dynamic light scattering, lower critical solution temperature, and transmission electron microscopy. After that, the cell and animal toxicity of nanoparticles were also investigated.

RESULTS

The results demonstrated that p(AAPBA-b-NVCL) was successfully synthesized, and can be easily self-assembled to form nanoparticles. The new nanoparticles included monodisperse submicron particles, with the size of the nanoparticle ranged between 150 and 300nm and are glucose- and temperature-sensitive. Meanwhile, insulin can be easily loaded by p(AAPBA-b-NVCL) nanoparticles and an effective sustained release of insulin was observed when the nanoparticles were placed in physiological saline. Besides, MTT assay revealed that cell viability was more than 80%, and mice demonstrated no negative impact on blood biochemistry and heart, liver, spleen, lung, and kidney after intraperitoneal injection of 10 mg/kg/d of nanoparticles. This suggested that the nanoparticles were low-toxic to both cells and animals. Moreover, they could lower the blood sugar level within 72h.

CONCLUSION

Our research suggested that these p(AAPBA-b-NVCL) nanoparticles might have the potential to be applied in a delivery system for insulin or other hypoglycemic proteins.

Dynamical release nanospheres containing cell growth factor from biopolymer hydrogel via reversible covalent conjugation

For practical adipose regeneration, the challenge is to dynamically deliver the key adipogenic insulin-like growth factors in hydrogels to induce adipogenesis. In order to achieve dynamic release, smart hydrogels to sense the change in the blood glucose concentration is required when glucose concentration increases. In this study, a heparin-based hydrogel has been developed for use in dynamic delivery of heparin nanospheres containing insulin-like growth factor. The gel scaffold was facilely prepared in physiological conditions by the formation of boronate-maltose ester cross-links between boronate and maltose groups of heparin derivatives. Due to its intrinsic glucose-sensitivity, the exposure of gel scaffold to glucose induces maltose functionalized nanospheres dissociation off hydrogel network and thereby could dynamically move into the microenvironment. The potential of the hydrogel as a cell scaffold was demonstrated by encapsulation of human adipose-derived stem cells (ASCs) within the gel matrix in vitro. Cell culture showed that this dynamic hydrogel could support survival and proliferation of ASCs. This biocompatible coupling chemistry has the advantage that it introduces no potentially cytotoxic groups into injectable gel scaffolds formed and can create a more biomimetic microenvironment for drug and cell delivery, rendering them more suitable for potential in vivo biomedical applications. All these results indicate that this biocompatible gel scaffold can render the formulation of a therapeutically effective platform for diabetes treatment and adipose regeneration.

Glucose-sensitive polymer nanoparticles for self-regulated drug delivery

Glucose-sensitive drug delivery systems, which can continuously and automatically regulate drug release based on the concentration of glucose, have attracted much interest in recent years. Self-regulated drug delivery platforms have potential application in diabetes treatment to reduce the intervention and improve the quality of life for patients. At present, there are three types of glucose-sensitive drug delivery systems based on glucose oxidase (GOD), concanavalin A (Con A), and phenylboronic acid (PBA) respectively. This review covers the recent advances in GOD-, Con A-, or PBA-mediated glucose-sensitive nanoscale drug delivery systems, and provides their major challenges and opportunities.

Boronic Acid as Glucose-Sensitive Agent Regulates Drug Delivery for Diabetes Treatment

In recent years, glucose-sensitive drug delivery systems have attracted considerable attention in the treatment of diabetes. These systems can regulate payload release by the changes of blood glucose levels continuously and automatically with potential application in self-regulated drug delivery. Boronic acid (BA), especially phenylboronic acid (PBA), as glucose-sensitive agent has been the focus of research in the design of glucose-sensitive platforms. This article reviews the previous attempts at the developments of PBA-based glucose-sensitive drug delivery systems regarding the PBA-functionalized materials and glucose-triggered drug delivery. The obstacles and potential developments of glucose-sensitive drug delivery systems based on PBA for diabetes treatment in the future are also described. The PBA-functionalized platforms that regulate drug delivery induced by glucose are expected to contribute significantly to the design and development of advanced intelligent self-regulated drug delivery systems for treatment of diabetes.

Polypeptide-participating complex nanoparticles with improved salt-tolerance as excellent candidates for intelligent insulin delivery

The strategy of introducing synthetic polypeptides with hierarchical ordered structures into glucose-responsive materials is reported in this study to achieve self-regulated release of insulin under physiological salt concentration.

Novel amphiphilic glucose-responsive modified starch micelles for insulin delivery

Glucose-responsive micelles with Schiff-based was reported, which had excellent stability and biocompatibility. The release of the insulin accelerated in high glucose concentration due to the highly sensitive of glucose in physiological conditions.

Well-defined degradable brush-coil block copolymers for intelligent release of insulin at physiological pH

To achieve an intelligent insulin delivery system with minimal long-term side effect, a kind of brush polymer was synthesized through poly[(2-phenylborate esters-1,3-dioxane-5-ethyl)methylacrylate] grafting from the backbone poly(ε-caprolactone).

Block versus Random Amphiphilic Glycopolymer Nanopaticles as Glucose-Responsive Vehicles

To explore the effect of polymer structure on their self-assembled aggregates and their unique characteristics, this study was devoted to developing a series of amphiphilic block and random phenylboronic acid-based glycopolymers by RAFT polymerization. The amphiphilic glycopolymers were successfully self-assembled into spherically shaped nanoparticles with narrow size distribution in aqueous solution. For block and random copolymers with similar monomer compositions, block copolymer nanoparticles exhibited a more regular transmittance change with the increasing glucose level, while a more evident variation of size and quicker decreasing tendency in I/I0 behavior in different glucose media were observed for random copolymer nanoparticles. Cell viability of all the polymer nanoparticles investigated by MTT assay was higher than 80%, indicating that both block and random copolymers had good cytocompatibility. Insulin could be encapsulated into both nanoparticles, and insulin release rate for random glycopolymer was slightly quicker than that for the block ones. We speculate that different chain conformations between block and random glycopolymers play an important role in self-assembled nanoaggregates and underlying glucose-sensitive behavior.

Glucose monitoring using a polymer brush modified polypropylene hollow fiber-based hydraulic flow sensor

Tight regulation of blood glucose levels of diabetic patients requires durable and robust continuous glucose sensing schemes. This manuscript reports the fabrication of ultrathin, phenylboronic acid (PBA) functionalized polymer brushes that swell upon glucose binding and which were integrated as the sensing interface in a new polypropylene hollow fiber (PPHF)-based hydraulic flow glucose sensor prototype. The polymer brushes were prepared via surface-initiated atom transfer radical polymerization of sodium methacrylate followed by postpolymerization modification with 3-aminophenyl boronic acid. In a first series of experiments, the glucose-response of PBA-functionalized poly(methacrylic acid) (PMAA) brushes grafted from planar silicon surfaces was investigated by quartz crystal microbalance with dissipation (QCM-D) and atomic force microscopy (AFM) experiments. The QCM-D experiments revealed a more or less linear change of the frequency shift for glucose concentrations up to ∼10 mM and demonstrated that glucose binding was completely reversible for up to seven switching cycles. The AFM experiments indicated that glucose binding was accompanied by an increase in the film thickness of the PBA functionalized PMAA brushes. The PBA functionalized PMAA brushes were subsequently grafted from the surface of PPHF membranes. The hydraulic permeability of these porous fibers depends on the thickness and swelling of the PMAA brush coating. PBA functionalized brush-coated PPHFs showed a decrease in flux upon exposure to glucose, which is consistent with swelling of the brush coating. Because they avoid the use of enzymes and do not rely on an electrochemical transduction scheme, these PPHF-based hydraulic flow sensors could represent an interesting alternative class of continuous glucose sensors.

A facile strategy to fabricate glucose-responsive vesicles via a template of thermo-sensitive micelles

Polymer vesicles fabricated based on the complexation between PBA- and GA containing block copolymers exhibited glucose-responsiveness at physiological pH.

Mucoadhesive and enzymatic inhibitory nanoparticles for transnasal insulin delivery

AIM

To develop a novel nanocarrier with mucoadhesion and enzymatic inhibition for transnasal insulin delivery. METHODS & METHODS: The physicochemical characterization of the nanoparticles included size and morphology, as well as mucoadhesion and enzymatic inhibition. The in vitro release of insulin from the nanoparticles was evaluated in 3 mg/ml glucose medium. The cytocompatibility of the nanoparticles was assessed by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay. The interactions of the nanoparticles with Caco-2 cells and nasal epithelia, and the effect of the nanoparticles on transnasal insulin delivery were estimated.

RESULTS

The nanoparticles were spherical in shape, with an average size of 100 nm, and presented strong enzymatic inhibitory activity and high mucin adsorption ability. The insulinloaded nanoparticles showed the rapid insulin release in 3 mg/ml glucose medium. The nanoparticles were noncytotoxic to Caco-2 cells. Furthermore, the insulin-loaded nanoparticles overcame mucosal barriers and significantly decreased plasma glucose levels.

Probing the nanostructure, interfacial interaction, and dynamics of chitosan-based nanoparticles by multiscale solid-state NMR

Chitosan-based nanoparticles (NPs) are widely used in drug and gene delivery, therapy, and medical imaging, but a molecular-level understanding of the internal morphology and nanostructure size, interface, and dynamics, which is critical for building fundamental knowledge for the precise design and efficient biological application of the NPs, remains a great challenge. Therefore, the availability of a multiscale (0.1-100 nm) and nondestructive analytical technique for examining such NPs is of great importance for nanotechnology. Herein, we present a new multiscale solid-state NMR approach to achieve this goal for the investigation of chitosan-poly(N-3-acrylamidophenylboronic acid) NPs. First, a recently developed (13)C multiple cross-polarization magic-angle spinning (MAS) method enabled fast quantitative determination of the NPs' composition and detection of conformational changes in chitosan. Then, using an improved (1)H spin-diffusion method with (13)C detection and theoretical simulations, the internal morphology and nanostructure size were quantitatively determined. The interfacial coordinated interaction between chitosan and phenylboronic acid was revealed by one-dimensional MAS and two-dimensional (2D) triple-quantum MAS (11)B NMR. Finally, dynamic-editing (13)C MAS and 2D (13)C-(1)H wide-line separation experiments provided details regarding the componential dynamics of the NPs in the solid and swollen states. On the basis of these NMR results, a model of the unique nanostructure, interfacial interaction, and componential dynamics of the NPs was proposed.

Fluorescence enhancement of cadmium selenide quantum dots assembled on silver nanoparticles and its application to glucose detection

In this work, a new assembled glucose sensor based on the Ag nanoparticle (AgNP)-enhanced fluorescence of CdSe quantum dots (QDs) was developed. The mercaptoglycerol-modified AgNPs and aminophenylboronic acid-functionalized CdSe QDs are assembled into AgNP-CdSe QD complexes through the formation of a boronate ester bond. As compared to that of bare CdSe QDs, up to a 9-fold fluorescence enhancement and a clear blue shift of the emission peak for AgNP-CdSe QD complexes were observed, which is attributed to the surface plasmon resonance of AgNPs. In addition, the as-formed complexes are gradually disassembled in the presence of glucose molecules because they can replace the AgNPs by competitive binding with boronic acid groups, resulting in the weakening of fluorescence enhancement. The decrease in fluorescence intensity presents a linear relationship with glucose concentration in the range from 2 to 52 mM with a detection limit of 1.86 mM. Such a metal-enhanced QDs fluorescence system may have promising applications in chemical and biological sensors.

Glucose-responsive hydrogels based on dynamic covalent chemistry and inclusion complexation

A novel glucose-responsive hydrogel system based on dynamic covalent chemistry and inclusion complexation was described. Hydrogels are formed by simply mixing the solutions of three components: poly(ethylene oxide)-b-poly vinyl alcohol (PEO-b-PVA) diblock polymer, α-cyclodextrin (α-CD) and phenylboronic acid (PBA)-terminated PEO crosslinker. Dynamic covalent bonds between PVA and PBA provide sugar-responsive crosslinking, and the inclusion complexation between PEO and α-CD can promote hydrogel formation and enhance hydrogel stability. The ratios of the three components have a remarkable effect on the gelation time and the mechanical properties of the final gels. In rheological measurements, the hydrogels are demonstrated to possess solid-like behaviour and good structural recovery ability after yielding. The sugar-responsiveness of the hydrogels was examined by protein loading and release experiments, and the results indicate that this property is also dependent on the compositions of the gels; at a proper component ratio, a new glucose-responsive hydrogel system operating at physiological pH can be obtained. The combination of good biocompatibility of the three components and the easy preparation of hydrogels with tunable glucose-responsiveness may enable an alternative design of hydrogel systems that finds potential applications in biomedical and pharmaceutical fields, such as treatment of diabetes.

Synthesis of end-functionalized boronic acid containing copolymers and their bioconjugates with rod-like viruses for multiple responsive hydrogels

End-functionalized boronic acid containing copolymers are grafted to a rod-like M13 virus. The resultant virus polymer can reversibly form hydrogels, which can be regulated by temperature, pH and glucose.

A rheumatoid arthritis magnetic resonance imaging contrast agent based on folic acid conjugated PEG-b-PAA@SPION

FA-PEG-b-PAA@SPPION offers a unique contrast ability for MRI of rheumatoid arthritis.

Complex Micelles with Glucose-Responsive Shells for Self-Regulated Release of Glibenclamide

Complex micelles with a hydrophobic poly(ϵ-caprolactone) (PCL) core and a mixed P(Asp-co-AspPBA)/PEG shell were prepared through co-assembly of two block copolymers PCL-b- P(Asp-co-AspPBA) and PEG-b-PCL in basic aqueous solutions. The P(Asp-co-AspPBA) chains (Asp = aspartic acid; AspPBA = aspartamidophenylboronic acid) collapsed and formed a shell layer around the PCL core at neutral pH while the soluble PEG chains stabilised the micelles. The collapsed P(Asp-co-AspPBA) polymer becomes soluble under higher glucose concentration and collapses onto the PCL core reversibly at lower glucose concentration. Self-regulated release of glibenclamide from the complex micelles was achieved based on the reversible change of P(Asp-co-AspPBA) chain mobility in response to the change of glucose concentration. As a result, polymeric micelles with glucose-responsive on-off switches were successfully developed.

Direct and indirect core–shell inversion of block copolymer micelles

A novel block copolymer PNIPAm-b-PBOB is reported where denaturation of PNIPAm and PBOB is switched by independent, controllable stimuli. Core–shell inversion may be realized via different pathways, indirect and direct, by adjusting the program of imposing the stimuli.

pH- and glucose-sensitive glycopolymer nanoparticles based on phenylboronic acid for triggered release of insulin

Amphiphilic poly(acrylic acid-co-acrylamidophenylboronic acid)-block-poly(2-acryloxyethyl galactose)-block-poly(acrylic acid-co-acrylamidophenylboronic acid) (((PAA-co-PAAPBA)-b-)₂PAEG) copolymer was fabricated: The poly(2-acryloyloxyethyl pentaacetylgalactoside) (PAEAcG) with narrow molecular weight distributions (Mw/Mn≤1.22) was prepared by atom transfer radical polymerization (ATRP) using dibromo-p-xylene (DBX) as initiator. Then the well-defined triblock copolymer poly(t-butyl acrylate)-b-poly(2-acryloyloxyethyl pentaacetylgalactoside)-b-poly(t-butyl acrylate) (PtBA-b-PAEAcG-b-PtBA) was synthesized by ATRP of tBA using PAEAcG homopolymer with dibromo end groups as macroinitiator. After hydrolysis of t-butyl acrylate block, amide linkage and deacetylation, the final copolymer ((PAA-co-PAAPBA)-b-)₂PAEG was obtained. Because of characteristics of three different segments, amphiphilic ((PAA-co-PAAPBA)-b-)₂PAEG can self-assemble into pH- and glucose-responsive nanoparticles studied by dynamic light scattering (DLS) and transmission electron microscopy (TEM). Furthermore, the in vitro release profiles of insulin also revealed obvious pH- and glucose-sensitivity of the nanoparticles. The analysis of cell viability suggested that the copolymer nanoparticles had good cytocompatibility.

Highly efficient drug delivery nanosystem via L-phenylalanine triggering based on supramolecular polymer micelles

An intelligent drug delivery nanosystem has been developed based on biodegradable supramolecular polymer micelles (SMPMs). The drug release can be triggered from SMPMs responsively by a bioactive agent, L-phenylalanine in a controlled fashion. The SMPMs are constructed from ethylcellulose-graft-poly(ε-caprolactone) (EC-g-PCL) and α-cyclodextrin (α-CD) derivate via host-guest and hydrophobic interactions. It has been found that these SMPMs have disassembled rapidly in response to an additional L-phenylalanine, due to great affinity discrepancy to α-CD between L-phenylalanine and PCL. Experiments have been carried out on trigger-controlled in vitro drug release of the SMPMs loaded with a model porphyrin based photosensitizer THPP. The result shows that the SMPMs released over 85% THPP in 6 h, which is two orders magnitudes faster than that of control. Also investigated is the photodynamic therapy (PDT) of THPP-loaded SMPMs with and without L-phenylalanine on MCF-7 carcinoma cell line. An effective trigger-concentration dependent lethal effect has been found showing promise in clinical photodynamic therapy.