Nanofibers by green electrospinning of aqueous suspensions of biodegradable block copolyesters for applications in medicine, pharmacy and agriculture

Polymer Colloids: Current Challenges, Emerging Applications, and New Developments

Polymer colloids are complex materials that have the potential to be used in a vast array of applications. One of the main reasons for their continued growth in commercial use is the water-based emulsion polymerization process through which they are generally synthesized. This technique is not only highly efficient from an industrial point of view but also extremely versatile and permits the large-scale production of colloidal particles with controllable properties. In this perspective, we seek to highlight the central challenges in the synthesis and use of polymer colloids, with respect to both existing and emerging applications. We first address the challenges in the current production and application of polymer colloids, with a particular focus on the transition toward sustainable feedstocks and reduced environmental impact in their primary commercial applications. Later, we highlight the features that allow novel polymer colloids to be designed and applied in emerging application areas. Finally, we present recent approaches that have used the unique colloidal nature in unconventional processing techniques.

Electrospun nanofibres in drug delivery: advances in controlled release strategies

Emerging drug-delivery systems demand a controlled or programmable or sustained release of drug molecules to improve therapeutic efficacy and patient compliance. Such systems have been heavily investigated as they offer safe, accurate, and quality treatment for numerous diseases. Amongst newly developed drug-delivery systems, electrospun nanofibres have emerged as promising drug excipients and are coming up as promising biomaterials. The inimitable characteristics of electrospun nanofibres in terms of their high surface-to-volume ratio, high porosity, easy drug encapsulation, and programmable release make them an astounding drug-delivery vehicle.

Recent Progress of Electrospun Herbal Medicine Nanofibers

Herbal medicine has a long history of medical efficacy with low toxicity, side effects and good biocompatibility. However, the bioavailability of the extract of raw herbs and bioactive compounds is poor because of their low water solubility. In order to overcome the solubility issues, electrospinning technology can offer a delivery alternative to resolve them. The electrospun fibers have the advantages of high specific surface area, high porosity, excellent mechanical strength and flexible structures. At the same time, various natural and synthetic polymer-bound fibers can mimic extracellular matrix applications in different medical fields. In this paper, the development of electrospinning technology and polymers used for incorporating herbal medicine into electrospun nanofibers are reviewed. Finally, the recent progress of the applications of these herbal medicine nanofibers in biomedical (drug delivery, wound dressing, tissue engineering) and food fields along with their future prospects is discussed.

Progress of Electrospun Nanofibrous Carriers for Modifications to Drug Release Profiles

Electrospinning is an advanced technology for the preparation of drug-carrying nanofibers that has demonstrated great advantages in the biomedical field. Electrospun nanofiber membranes are widely used in the field of drug administration due to their advantages such as their large specific surface area and similarity to the extracellular matrix. Different electrospinning technologies can be used to prepare nanofibers of different structures, such as those with a monolithic structure, a core-shell structure, a Janus structure, or a porous structure. It is also possible to prepare nanofibers with different controlled-release functions, such as sustained release, delayed release, biphasic release, and targeted release. This paper elaborates on the preparation of drug-loaded nanofibers using various electrospinning technologies and concludes the mechanisms behind the controlled release of drugs.

Natural Polymers and Their Nanocomposites Used for Environmental Applications

The aim of this review is to bring together the main natural polymer applications for environmental remediation, as a class of nexus materials with advanced properties that offer the opportunity of integration in single or simultaneous decontamination processes. By identifying the main natural polymers derived from agro-industrial sources or monomers converted by biotechnology into sustainable polymers, the paper offers the main performances identified in the literature for: (i) the treatment of water contaminated with heavy metals and emerging pollutants such as dyes and organics, (ii) the decontamination and remediation of soils, and (iii) the reduction in the number of suspended solids of a particulate matter (PM) type in the atmosphere. Because nanotechnology offers new horizons in materials science, nanocomposite tunable polymers are also studied and presented as promising materials in the context of developing sustainable and integrated products in society to ensure quality of life. As a class of future smart materials, the natural polymers and their nanocomposites are obtained from renewable resources, which are inexpensive materials with high surface area, porosity, and high adsorption properties due to their various functional groups. The information gathered in this review paper is based on the publications in the field from the last two decades. The future perspectives of these fascinating materials should take into account the scale-up, the toxicity of nanoparticles, and the competition with food production, as well as the environmental regulations.

Green electrospinning for biomaterials and biofabrication

Green manufacturing has emerged across industries, propelled by a growing awareness of the negative environmental and health impacts associated with traditional practices. In the biomaterials industry, electrospinning is a ubiquitous fabrication method for producing nano- to micro-scale fibrous meshes that resemble native tissues, but this process traditionally utilizes solvents that are environmentally hazardous and pose a significant barrier to industrial scale-up and clinical translation. Applying sustainability principles to biomaterial production, we have developed a 'green electrospinning' process by systematically testing biologically benign solvents (U.S. Food and Drug Administration Q3C Class 3), and have identified acetic acid as a green solvent that exhibits low ecological impact (global warming potential (GWP) = 1.40 CO₂eq. kg/L) and supports a stable electrospinning jet under routine fabrication conditions. By tuning electrospinning parameters, such as needle-plate distance and flow rate, we updated the fabrication of widely utilized biomedical polymers (e.g. poly-α-hydroxyesters, collagen), polymer blends, polymer-ceramic composites, and growth factor delivery systems. Resulting 'green' fibers and composites are comparable to traditional meshes in terms of composition, chemistry, architecture, mechanical properties, and biocompatibility. Interestingly, material properties of green synthetic fibers are more biomimetic than those of traditionally electrospun fibers, doubling in ductility (91.86 ± 35.65 vs. 45 ± 15.07%,n= 10,p< 0.05) without compromising yield strength (1.32 ± 0.26 vs. 1.38 ± 0.32 MPa) or ultimate tensile strength (2.49 ± 0.55 vs. 2.36 ± 0.45 MPa). Most importantly, green electrospinning proves advantageous for biofabrication, rendering a greater protection of growth factors during fiber formation (72.30 ± 1.94 vs. 62.87 ± 2.49% alpha helical content,n= 3,p< 0.05) and recapitulating native ECM mechanics in the fabrication of biopolymer-based meshes (16.57 ± 3.92% ductility, 33.38 ± 30.26 MPa elastic modulus, 1.30 ± 0.19 MPa yield strength, and 2.13 ± 0.36 MPa ultimate tensile strength,n= 10). The eco-conscious approach demonstrated here represents a paradigm shift in biofabrication, and will accelerate the translation of scalable biomaterials and biomimetic scaffolds for tissue engineering and regenerative medicine.

Green Electrospinning of Polymer Latexes: A Systematic Study of the Effect of Latex Properties on Fiber Morphology

Green electrospinning is a relatively new promising technology in which a polymer (latex) can be spun from an aqueous dispersion with the help of a template polymer. This method is a green, clean and safe technology that is able to spin hydrophobic polymers using water as an electrospinning medium. In this article, a systematic study that investigates the influence of the template polymer molar mass, the total solids content of the initial dispersion and the particle/template ratio is presented. Furthermore, the influence of the surfactant used to stabilize the polymer particles, the surface functionality of the polymer particles and the use of a bimodal particle size distribution on the final fiber morphology is studied for the first time. In green electrospinning, the viscosity of the initial complex blend depends on the amount and molar mass of the template polymer but also on the total solids content of the dispersion to be spun. Thus, both parameters must be carefully taken into account in order to fine-tune the final fiber morphology. Additionally, the particle packing and the surface chemistry of the polymer particles also play an important role in the obtained nanofibers quality.

Electrospinning: Application and Prospects for Urologic Tissue Engineering

Functional disorders and injuries of urinary bladder, urethra, and ureter may necessitate the application of urologic reconstructive surgeries to recover normal urine passage, prevent progressive damages of these organs and upstream structures, and improve the quality of life of patients. Reconstructive surgeries are generally very invasive procedures that utilize autologous tissues. In addition to imperfect functional outcomes, these procedures are associated with significant complications owing to long-term contact of urine with unspecific tissues, donor site morbidity, and lack of sufficient tissue for vast reconstructions. Thanks to the extensive advancements in tissue engineering strategies, reconstruction of the diseased urologic organs through tissue engineering have provided promising vistas during the last two decades. Several biomaterials and fabrication methods have been utilized for reconstruction of the urinary tract in animal models and human subjects; however, limited success has been reported, which inspires the application of new methods and biomaterials. Electrospinning is the primary method for the production of nanofibers from a broad array of natural and synthetic biomaterials. The biomimetic structure of electrospun scaffolds provides an ECM-like matrix that can modulate cells' function. In addition, electrospinning is a versatile technique for the incorporation of drugs, biomolecules, and living cells into the constructed scaffolds. This method can also be integrated with other fabrication procedures to achieve hybrid smart constructs with improved performance. Herein, we reviewed the application and outcomes of electrospun scaffolds in tissue engineering of bladder, urethra, and ureter. First, we presented the current status of tissue engineering in each organ, then reviewed electrospun scaffolds from the simplest to the most intricate designs, and summarized the outcomes of preclinical (animal) studies in this area.

Production of a novel poly(ɛ-caprolactone)-methylcellulose electrospun wound dressing by incorporating bioactive glass and Manuka honey

Wound dressings produced by electrospinning exhibit a fibrous structure close to the one of the extracellular matrix of the skin. In this article, electrospinning was used to fabricate fiber mats based on the well-known biopolymers poly(ɛ-caprolactone) (PCL) and methylcellulose (MC) using benign solvents. The blend fiber mats were cross-linked using Manuka honey and additionally used as a biodegradable platform to deliver bioactive glass particles. It was hypothesized that a dual therapeutic effect can be achieved by combining Manuka honey and bioactive glass. Morphological and chemical examinations confirmed the successful production of submicrometric PCL-MC fiber mats containing Manuka honey and bioactive glass particles. The multifunctional fiber mats exhibited improved wettability and suitable mechanical properties (ultimate tensile strength of 3-5 MPa). By performing dissolution tests using simulated body fluid, the improved bioactivity of the fiber mats by the addition of bioactive glass was confirmed. Additionally, cell biology tests using human dermal fibroblasts and human keratinocytes-like HaCaT cells showed the potential of the fabricated composite fiber mats to be used as wound dressing, specially due to the ability to support wound closure influenced by the presence of bioactive glass. Moreover, based on the results of the antibacterial tests, it is apparent that an optimization of the electrospun fiber mats is required to develop suitable wound dressing for the treatment of infected wounds.

Electrospun Anion-Conducting Ionomer Fibers-Effect of Humidity on Final Properties

Anion-conducting ionomer-based nanofibers mats are prepared by electrospinning (ES) technique. Depending on the relative humidity (RH) during the ES process (RHES), ionomer nanofibers with different morphologies are obtained. The effect of relative humidity on the ionomer nanofibers morphology, ionic conductivity, and water uptake (WU) is studied. A branching effect in the ES fibers found to occur mostly at RHES < 30% is discussed. The anion conductivity and WU of the ionomer electrospun mats prepared at the lowest RHES are found to be higher than in those prepared at higher RHES. This effect can be ascribed to the large diameter of the ionomer fibers, which have a higher WU. Understanding the effect of RH during the ES process on ionomer-based fibers' properties is critical for the preparation of electrospun fiber mats for specific applications, such as electrochemical devices.

Fibronectin Functionalized Electrospun Fibers by Using Benign Solvents: Best Way to Achieve Effective Functionalization

The aim of this study is to demonstrate the feasibility of different functionalization methods for electrospun fibers developed using benign solvents. In particular three different approaches were investigated to achieve the functionalization of poly(epsilon caprolactone) (PCL) electrospun fibers with fibronectin. Protein surface entrapment, chemical functionalization and coaxial electrospinning were performed and compared. Moreover, bilayered scaffolds, with a top patterned and functionalized layer with fibronectin and a randomly oriented not functionalized layer were fabricated, demonstrating the versatility of the use of benign solvents for electrospinning also for the fabrication of complex graded structures. Besides the characterization of the morphology of the obtained scaffolds, ATR-FTIR and ToF-SIMS were used for the surface characterization of the functionalized fibers. Cell adhesion and proliferation were also investigated by using ST-2 cells. Positive results were obtained from all functionalized scaffolds and the most promising results were obtained with bilayered scaffolds, in terms of cells infiltration inside the fibrous structure.

Electrospun patterned porous scaffolds for the support of ovarian follicles growth: a feasibility study

Recently, the interest of the scientific community is focused on the application of tissue engineering approach for the fertility restoration. In this paper innovative patterned electrospun fibrous scaffolds were fabricated and used as 3D system for porcine follicles culture. The obtained scaffolds demonstrated to be a suitable support which did not alter or interfere with the typical spherical follicles morphology. The fibrillar structure of the scaffolds mimics the morphology of the healthy native tissue. The use of porcine follicles implied many advantages respect to the use of mouse model. Relevant results showed that more than the scaffold pattern and struts dimension, the selection of proper biomaterials improve the follicles adhesion and development.

An Experimental Approach to the Synthesis and Optimisation of a 'Green' Nanofibre

Currently, green-based materials are receiving attention in a quest to achieve a sustainable environment for human life. Herein, we report an investigation of developing a simple novel green nanofibre by using H₂O₂-assisted water soluble chitosan/polyvinyl alcohol (WSCHT/PVA) in the presence of water as an eco-friendly solvent. The effect of various process parameters on the mean fibre diameter was investigated based on the Taguchi L₉ ( 3 4 ) orthogonal array experimental design. Optimal process parameters were determined using the signal-to-noise (S/N) ratio of diameter according to the 'smaller-the-better' concept. Accordingly, the smallest fibre diameter observed was 122 nm and it was yielded at solution concentration of 10%; a voltage of 16 kV; a flow rate of 0.7 mL h-1; and a collection distance of 8 cm. The implications of a green environmentally sustainable material impact on a number of diverse end uses.

Green electrospun and crosslinked poly(vinyl alcohol)/poly(acrylic acid) composite membranes for antibacterial effective air filtration

Air pollution has become a major environmental concern given the ever increasing levels of particulate matter (PM) and the increased in treatment-resistant bacterial and viral strains. Major efforts are therefore required into the development of air filtration and purification technology as well as novel, alternative antiviral and antibacterial treatment modalities. Here, we report an environmentally friendly method for the generation of multifunctional poly(vinyl alcohol)/poly(acrylic acid) (PVA-PAA) composite membranes via green electrospinning and thermal crosslinking. Superhydrophobic silica nanoparticles were then incorporated into the fibers resulting in a rough surface, after which AgNO₃ was introduced, resulting in the formation of Ag nanoparticles through UV reduction. The PVA-PAA-SiO₂-Ag NPs membranes were found to possess high air filtration performance (with >98% filtration efficiency for PM_2.5) as well as potent antibacterial and antiviral activities. The green synthesis approach avoids the use of hazardous organic solvents, thereby bypassing any potential toxicity concerns caused by organic solvent residues. These newly designed PVA-PAA-SiO₂ NPs-Ag NPs nanofibrous membranes with many superior features (e.g. high filtration efficiency, high tensile strength, biological compatibility, and antibacterial properties) can be applied in eco-friendly air filtration materials, in particular for personal air filtration devices.

Electrospun Nanofibrous Silk Fibroin Membranes Containing Gelatin Nanospheres for Controlled Delivery of Biomolecules

Development of novel and effective drug delivery systems for controlled release of bioactive molecules is of critical importance in the field of regenerative medicine. Here, oppositely charged gelatin nanospheres are incorporated into silk fibroin nanofibers through a colloidal electrospinning technique. A novel fibrous nano-in-nano drug delivery system is fabricated without the use of any organic solvent. The distribution of fluorescently labeled gelatin A and B nanospheres inside the nanofibers can be fine-tuned by simple adjustment of the weight ratio between the nanospheres and the relative feeding rate of core and shell solutions containing nanospheres by using single and coaxial nozzle electrospinning, respectively. Incorporation of vancomycin-loaded gelatin B nanospheres into the silk fibroin nanofibrous membranes results in a more sustained release of vancomycin, compared to the gelatin nanospheres free membranes. In addition, these membranes exhibit excellent and prolonged antibacterial effects against Staphylococcus aureus. Moreover, these membranes support the attachment, spreading, and proliferation of periodontal ligament cells. These results suggest that the beneficial properties of gelatin nanospheres can be exploited to improve the biological functionality of electrospun nanofibrous silk fibroin membranes.

Incorporation of bioactive glass nanoparticles in electrospun PCL/chitosan fibers by using benign solvents

The use of bioactive glass (BG) particles as a filler for the development of composite electrospun fibers has already been widely reported and investigated. The novelty of the present research work is represented by the use of benign solvents (like acetic acid and formic acid) for electrospinning of composite fibers containing BG particles, by using a blend of PCL and chitosan. In this work, different BG particle sizes were investigated, namely nanosized and micron-sized. A preliminary investigation about the possible alteration of BG particles in the electrospinning solvents was performed using SEM analysis. The obtained composite fibers were investigated in terms of morphological, chemical and mechanical properties. An in vitro mineralization assay in simulated body fluid (SBF) was performed to investigate the capability of the composite electrospun fibers to induce the formation of hydroxycarbonate apatite (HCA).

Nanogel containing electrospun nanofibers as a platform for stable loading of proteins

We designed polysaccharide nanogel-containing nanofibers by electrospinning. This system have a great potential for protein delivery systems.

Nanoparticles meet electrospinning: recent advances and future prospects

Nanofibres can be fabricated by various methods and perhaps electrospinning is the most facile route. In past years, electrospinning has been used as a synthesis technique and the fibres have been prepared from a variety of starting materials and show various properties. Recently, incorporating functional nanoparticles (NPs) with electrospun fibres has emerged as one of most exciting research topics in the field of electrospinning. When NPs are incorporated, on the one hand the NPs endow the electrospun fibres/mats novel or better performance, on the other hand the electrospun fibres/mats could preserve the NPs from corrosion and/or oxidation, especially for NPs with anisotropic structures. More importantly, electrospinning shows potential applications in self-assembly of nanoscale building blocks for generating new functions, and has some obvious advantages that are not available by other self-assembly methods, i.e., the obtained free-standing hybrid mats are usually flexible and with large area, which is favourable for their commercial applications. In this critical review, we will focus on the fabrication and applications of NPs-electrospun fibre composites and give an overview on this emerging field combining nanoparticles and electrospinning. Firstly, two main strategies for producing NPs-electrospun fibres will be discussed, i.e., one is preparing the NPs-electrospun fibres after electrospinning process that is usually combined with other post-processing methods, and the other is fabricating the composite nanofibres during the electrospinning process. In particular, the NPs in the latter method will be classified and introduced to show the assembling effect of electrospinning on NPs with different anisotropic structures. The subsequent section describes the applications of these NPs-electrospun fibre mats and nanocomposites, and finally a conclusion and perspectives of the future research in this emerging field is given.

Electrospinning of Pullulan Nanofibers for Food Package Materials

Electrospinning is a process that fabricates continuous fibers with diameters in the nanoto micron range. Pullulan with different concentrations were successfully electrospun into nanofibers with water as solvent in this study. We have evaluated the effects of solution concentration on the morphology of the fibers. The morphologies of the nanofibrous mats were examined by Scanning Electron Microscopy (SEM). With increasing the solution concentration, the electrospun nanofibers changed from beaded nanofibers to smooth nanofibers, meanwhile, the average diameters of electrospun pullulan nanofibers increased from 44nm, 89nm, 136nm, 172nm to 219nm when the solution concentration changed from 12, 15, 20, 25 to 30 wt%. The distribution of electrospun fibers is normal distribution. The electrospun nanofibrous mats will be a promising food package material.

Characterization via two-color STED microscopy of nanostructured materials synthesized by colloid electrospinning

A model system for multicompartment nanofibers was fabricated by colloid electrospinning. The obtained nanostructured material consisted of fluorescent polymer nanoparticles that were synthesized in a miniemulsion and then embedded in fluorescently labeled polymer nanofibers. Because of the absence of contrast between both polymers, the immobilized nanoparticles cannot be reliably identified in the nanofibers via electron microscopy or other techniques. Here, we describe investigations on the hybrid material with two-color STED microscopy to localize the nanoparticles and to quantify their distribution along nanofibers with particle and fiber radii down to 50 nm.