Live Monitoring of Cargo Release From Peptide-Based Hybrid Nanocapsules Induced by Enzyme Cleavage

Nanoemulsions for synthesis of biomedical nanocarriers

Nanoemulsions are kinetically stabilized emulsions with droplet sizes in the nanometer scale. These nanodroplets are able to confine spaces in which reactions of polymerization or precipitation can take place, leading to the formation of particles and capsules that can act as nanocarriers for biomedical applications. This review discusses the different possibilities of using nanoemulsions for preparing biomedical nanocarriers. According to the chemical nature, nanocarriers prepared in nanoemulsions are classified in polymeric, inorganic, or hybrid. The main synthetic strategies for each type are revised, including miniemulsion polymerization, nanoemulsion-solvent evaporation, spontaneous emulsification, sol-gel processes, and combination of different techniques to form multicomponent materials.

Förster resonance energy transfer (FRET)-Labeled nanoprobe enables real-time diagnosis of pancreatic juice activation due to postoperative pancreatic fistula

OBJECTIVES

Postoperative pancreatic fistula (POPF) subsequent to pancreatectomy often causes activation of pancreatic juice, resulting in serious complications. In POPF, the types of pancreatic juices found are active and inactive, and the identification of these two types of pancreatic juice greatly contributes to the development of postoperative management after pancreatectomy. This study reports favorable results of the clinical application of the Förster resonance energy transfer (FRET) nanoprobe that was independently developed to distinguish between the active and inactive types of pancreatic juice.

METHODS

The FRET nanoprobe developed was a nanoprotein capsule. It exuded a red color when the capsule structure was maintained. When activated protease in the pancreatic juice acts on it, the capsules are reduced quantitatively and FRET is abolished, resulting in a change in color from red to green. Pancreatic juice activation can be measured by the FRET signal. A total of 117 drainage fluid samples from 16 postpancreatoduodenectomy cases were obtained and evaluated.

RESULTS

The diagnosis of pancreatic juice activation was possible using the FRET signal with a cut-off value of 1.6. Pancreatic juice activation was not associated with drainage fluid amylase (AMY) levels. The results demonstrated that pancreatic juice was activated when drainage fluid was infected.

CONCLUSION

The use of a FRET nanoprobe enabled real-time detection of the presence or absence of pancreatic juice activation in pancreatic fistula after pancreatic surgery. There was an adequate correlation between infection and pancreatic juice activation regardless of drain AMY levels.

Assessing the range of enzymatic and oxidative tunability for biosensor design

Development of multi-functional materials and biosensors that can achieve an in situ response designed by the user is a current need in the biomaterials field, especially in complex biological environments, such as inflammation, where multiple enzymatic and oxidative signals are present. In the past decade, there has been extensive research and development of materials chemistries for detecting and monitoring enzymatic activity, as well as for releasing therapeutic and diagnostic agents in regions undergoing oxidative stress. However, there has been limited development of materials in the context of enzymatic and oxidative triggers together, despite their closely tied and overlapping mechanisms. With research focusing on enzymatically and oxidatively triggered materials separately, these systems may be inadequate in monitoring the complexity of inflammatory environments, thus limiting in vivo translatability and diagnostic accuracy. The intention of this review is to highlight a variety of enzymatically and oxidatively triggered materials chemistries to draw attention to the range of synthetic tunability available for the construction of novel biosensors with a spectrum of programmed responses. We focus our discussion on several types of macromolecular sensors, generally classified by the causative material response driving ultimate signal detection. This includes sensing based on degradative processes, conformational changes, supramolecular assembly/disassembly, and nanomaterial interactions, among others. We see each of these classes providing valuable tools toward coalescing current gaps in the biosensing field regarding specificity, selectivity, sensitivity, and flexibility in application. Additionally, by considering the materials chemistry of enzymatically and oxidatively triggered biomaterials in tandem, we hope to encourage synthesis of new biosensors that capitalize on their synergistic roles and overlapping mechanisms in inflammatory environments for applications in disease diagnosis and monitoring.

From In Silico to Experimental Validation: Tailoring Peptide Substrates for a Serine Protease

Smart nanocarriers for the transport of drugs to tumor cells are nowadays of great interest for treating cancer. The use of enzymatic stimuli to cleave peptide-based drug nanocapsules for the selective release of nanocapsule cargo in close proximity to tumor cells opens new possibilities in cancer research. In the present work, we demonstrate a methodology for finding and optimizing cleavable substrate sequences by the type II transmembrane serine protease hepsin, which is highly overexpressed in prostate cancer. The design and screening of combinatorial libraries in silico against the binding cavity of hepsin allow the identification of a panel of promising substrates with high-calculated docking scores. In vitro screening verifies the predictions and showed that all substrates are cleaved by hepsin with higher efficiency than the literature known hepsin substrate RQLR↓VVGG. The introduction of d-amino acids on a selected peptide with the highest catalytic efficiency (k_cat/K_m) renders it resistant to cleavage by plasma or serum while maintaining their susceptibility to hepsin.

Matrix Metalloproteinase-sensitive Multistage Nanogels Promote Drug Transport in 3D Tumor Model

Physiological barriers inside of tumor tissue often result in poor interstitial penetration and heterogeneous intratumoral distribution of nanoparticle-based drug delivery systems (DDS). Novel, matrix metalloproteinase (MMP)-sensitive peptide-crosslinked nanogels (pNGs) as multistage DDS are reported with a beneficial size reduction property to promote the process of deep tissue penetration. Methods: The presented pNGs are based on a dendritic polyglycerol (dPG) scaffold crosslinked by a modified MMP-sensitive fluorogenic peptide. The crosslinker integrates degradability in response to proteases present in the tumor microenvironment. Surfactant-free, inverse nanoprecipitation is employed to prepare the nanogels using strain-promoted click chemistry. The size and crosslinking density of the pNGs are controlled by the functionalization degree of dPG with cyclooctyne groups and by the peptide crosslinker fraction. The intrinsic reporter moiety of the crosslinker was used to study the influence of pNG compositions on the degradation profile. The therapeutic drug Doxorubicin was conjugated through a pH-sensitive linkage to dPG to form a multistage DDS. The penetration behavior of the pNGs was studied using agarose matrix and multicellular tumor spheroids (MCTS). Results: Nanogel sizes were controlled in the range of 150-650 nm with narrow size distributions and varying degrees of crosslinking. The pNGs showed stability in PBS and cell media but were readily degraded in the presence of MMP-7. The crosslinking density influenced the degradation kinetic mediated by MMP-7 or cells. Stable conjugation of DOX at physiological pH and controlled drug release at acidic pH were observed. The digestions of nanogels lead to a size reduction to polymer-drug fragments which efficiently penetrated into agarose gels. Moreover, the degradable multistage pNGs demonstrated deeper penetration into MCTS as compared to their non-degradable counterparts. Thus, degradable pNGs were able to deliver their cargo and efficiently reduce the cell viability in MCTS. Conclusion: The triggered size reduction of the pNGs by enzymatic degradation can facilitate the infiltration of the nanocarrier into dense tissue, and thereby promote the delivery of its cargo.

Morphology-dependent pH-responsive release of hydrophilic payloads using biodegradable nanocarriers

The development of functional nanocarriers with stimuli-responsive properties has advanced tremendously to serve biomedical applications such as drug delivery and regenerative medicine. However, the development of biodegradable nanocarriers that can be loaded with hydrophilic compounds and ensure its controlled release in response to changes in the surrounding environment still remains very challenging. Herein, we achieved such demands via the preparation of aqueous core nanocapsules using a base-catalyzed interfacial reaction employing a diisocyanate monomer and functional monomers/polymers containing thiol and hydroxyl functionalities at the droplet interface. pH-responsive poly(thiourethane–urethane) nanocarriers with ester linkages were synthesized by incorporating polycaprolactone diol, which is susceptible to hydrolytic degradation via ester linkages, as a functional monomer in the reaction formulation. We could demonstrate that by systematically varying the number of biodegradable segments, the morphology of the nanocarriers can be tuned without imparting the efficient encapsulation of hydrophilic payload (>85% encapsulation efficiency) and its transfer from organic to aqueous phase. The developed nanocarriers allow for a fast release of hydrophilic payload that depends on pH, the number of biodegradable segments and nanocarrier morphology. Succinctly put, this study provides important information to develop pH-responsive nanocarriers with tunable morphology, using interfacial reactions in the inverse miniemulsion process, by controlling the number of degradable segments to adjust the release profile depending on the type of application envisaged.

The morphology and release properties of aqueous core nanocapsules for the pH-responsive release of hydrophilic payload was investigated by systematically varying the number of biodegradable segments.

Multifunctionalized polyurethane-polyurea nanoparticles: hydrophobically driven self-stratification at the o/w interface modulates encapsulation stability

Polyurethane-polyurea (PUUa) reactive prepolymers with adjusted hydrophobic and hydrophilic dangling chains to achieve multiwalled sub-30 nm nanoparticles are presented. The combination of an amphiphilic and a hydrophobic prepolymer at the oil-water interface creates a stratified shell by hydrophobic interactions. These novel nanostructures enhance the encapsulation stability of lipophilic compounds compared to monowalled nanostructures and facilitate the selective and ordered functionalization along the multiwalled shell with bioactive motifs. As proof of concept, PUUa nanoparticles have been engineered with disulfide bonds and an α_vβ₃ integrin-selective cyclic RGD peptide (cRGDfK) providing our system with glutathione (GSH) triggered controlled release and cell targeting specificity to U87 tumor cells.

Reversible activation of pH-sensitive cell penetrating peptides attached to gold surfaces

pH-sensitive viral fusion protein mimics are widely touted as a promising route towards site-specific delivery of therapeutic compounds across lipid membranes. Here, we demonstrate that a fusion protein mimic, designed to achieve a reversible, pH-driven helix-coil transition mechanism, retains its functionality when covalently bound to a surface.

Nanoparticles from renewable polymers

The use of polymers from natural resources can bring many benefits for novel polymeric nanoparticle systems. Such polymers have a variety of beneficial properties such as biodegradability and biocompatibility, they are readily available on large scale and at low cost. As the amount of fossil fuels decrease, their application becomes more interesting even if characterization is in many cases more challenging due to structural complexity, either by broad distribution of their molecular weights (polysaccharides, polyesters, lignin) or by complex structure (proteins, lignin). This review summarizes different sources and methods for the preparation of biopolymer-based nanoparticle systems for various applications.

Selective Interfacial Olefin Cross Metathesis for the Preparation of Hollow Nanocapsules

The first synthesis of hollow nanocapsules with an aqueous core via olefin cross metathesis is presented. The reaction was tailored such that it proceeds selectively at the oil-water interface of aqueous nanodroplets in an inverse miniemulsion. The cross metathesis takes place between an acrylated polysaccharide and unsaturated organophosphates under mild conditions. This general protocol allows the synthesis of biocompatible and polyfunctional nanocapsules via the bioorthogonal olefin metathesis, thus generating a highly versatile methodology for the design of future materials for biomedical applications but also for materials science. Functionalization of the nanocapsules was demonstrated with fluorescent labels, which can be attached to the pendant phosphoester either within the cross-linker, exploiting the versatility of the phosphorus chemistry, or via coupling to the capsules' surface.

Advanced dextran based nanogels for fightingStaphylococcus aureusinfections by sustained zinc release

Zinc loaded polysaccharide based nanogel shell hybrid structures with prolonged zinc retention and antibacterial activity are presented.

Synthesis of nanostructured materials in inverse miniemulsions and their applications

Polymeric nanogels, inorganic nanoparticles, and organic-inorganic hybrid nanoparticles can be prepared via the inverse miniemulsion technique. Hydrophilic functional cargos, such as proteins, DNA, and macromolecular fluoresceins, may be conveniently encapsulated in these nanostructured materials. In this review, the progress of inverse miniemulsions since 2000 is summarized on the basis of the types of reactions carried out in inverse miniemulsions, including conventional free radical polymerization, controlled/living radical polymerization, polycondensation, polyaddition, anionic polymerization, catalytic oxidation reaction, sol-gel process, and precipitation reaction of inorganic precursors. In addition, the applications of the nanostructured materials synthesized in inverse miniemulsions are also reviewed.

Enzyme cleavable nanoparticles from peptide based triblock copolymers

A solid-phase synthesis based approach towards protease cleavable polystyrene-peptide-polystyrene triblock copolymers and their formulation to nanoparticulate systems is presented. These nanoparticles are suitable for the optical detection of an enzyme and have the potential for application as a drug delivery system. Two different peptide sequences, one cleaved by trypsin (GFF), the other by hepsin (RQLRVVGG), a protease overexpressed in early stages of prostate cancer, are used as the central part of the triblock. For optical detection a fluorophore-quencher pair is introduced around the cleavage sequence. The solid phase synthesis is conduced such that two identical sequences are synthesized from one branching point. Eventually, carboxy-terminated polystyrene is introduced into the peptide synthesizer and coupled to the amino-termini of the branched sequence. Upon cleavage, a fragment is released from the triblock copolymer, which has the potential for use in drug delivery applications. Conducting the whole synthesis on a solid phase in the peptide synthesizer avoids solubility issues and post-synthetic purification steps. Due to the hydrophobic PS-chains, the copolymer can easily be formulated to form nanoparticles using a nanoprecipitation process. Incubation of the nanoparticles with the respective enzymes leads to a significant increase of the fluorescence from the incorporated fluorophore, thereby indicating cleavage of the peptide sequence and decomposition of the particles.

Enzyme responsive materials: design strategies and future developments

Enzyme responsive materials (ERMs) are a class of stimuli responsive materials with broad application potential in biological settings. This review highlights current and potential future design strategies for ERMs and provides an overview of the present state of the art in the area.