One Pot Synthesis of a Polyisoprene Polyrotaxane and Conversion to a Slide-Ring Gel

Bispillar[5]arene-Based Slide-Ring Polyrotaxanation Enables Enhanced Toughness, Recyclability, Impact, and Puncture Resistance of Polyisoprene Elastomers

A series of slide-ring polyrotaxanes (SRPs) have been constructed by the solvent-free blending of a ditopic pillar[5]arene (DP5A) and polyisoprene (PIP) after thermal annealing. Solid-state 13C NMR experiments supported the fact that the pillar[5]arene rings of DP5A were threaded by PIP chains to afford physically interlocked networks. Tensile tests revealed that 1% of DP5A can improve the elongation at break from 50 to 239%, the tensile modulus from 2.1 to 3.9 MPa, and the toughness from 0.35 to 4.5 MJ/m3. Impact and puncture resistance experiments show that the DP5A-doped materials exhibit remarkable enhancement of protective and impalement-resistant performance. The samples can be also recycled repeatedly due to their physical crosslinking nature. The important stress delocalization effects have been attributed to the pulley effect of DP5A in the SRP materials, which represents a supramolecular approach for improving the performance of PIP elastomers.

Polyurethane-Type Poly[3]rotaxanes Synthesized from Cyclodextrin-Based [3]Rotaxane Diol and Diisocyanates

Synthesis of polyurethane-type poly[3]rotaxanes is achieved by polyaddition between a cyclodextrin (CD)-based [3]rotaxane diol and various diisocyanate species, which provide a more defined structure compared to conventional polyrotaxane syntheses. In this study, hydroxyl groups on CDs of [3]rotaxane diol are initially acetylated, and deprotected after the polyaddition to introduce polyurethane backbone structure into polyrotaxane framework. Despite a relatively complicated chemical structure, [3]rotaxane diol monomer is successfully synthesized in a high yield (overall 67%) without any taxing purification process, which is beneficial for practical applications. The polymerization itself proceeds well under a standard polyaddition reaction condition to afford corresponding polyurethanes around 80% yield with Mn > 30 kDa. The poly[3]rotaxanes show different aggregation behavior or optical properties, whether or not acetyl groups are present, and are analyzed by XRD, SEM, and fluorescence measurements.

Aggregation Behavior of Cyclodextrin-Based [3]Rotaxanes

The aggregation of a cyclodextrin (CD)-based [3]rotaxane has been observed and analyzed in detail for the first time in this work. Although the hexagonal packing aggregation of CD-based polyrotaxane is a well known phenomenon, corresponding studies in terms of rotaxanes without any polymer structure have not been conducted so far, probably owing to the difficulty of the molecular design. We synthesized a series of [3]rotaxane species by using a urea-end-capping method and evaluated their aggregation behavior by XRD and SEM measurements. [3]Rotaxane species containing native CD rings showed clear signals assigned to the hexagonal packing by XRD measurement as did polyrotaxane; this proved their aggregation capability. Because the corresponding per-acetylated derivatives did not show this aggregation behavior, the driving force of this aggregation was suggested to be hydrogen bond formation among CD units. The effect of axle end structures and partial acetylation of CDs were also studied.

Polyrotaxanes created by end-capping polypseudorotaxanes self-assembled from β-CDs with distal azide terminated PHEMA using propargylamine monosubstituted β-CDs

When a distal azide terminated PHEMA was allowed to self-assemble with varying amounts of β-CDs in water, followed by in situ reaction with PA-β-CDs via the CuAAC, linear polyrotaxanes (PRs) and a mixture of linear and hyperbranched PRs were obtained.

Exploring and Exploiting the Symmetry-Breaking Effect of Cyclodextrins in Mechanomolecules

Cyclodextrins (CDs) are cone-shaped molecular rings that have been widely employed in supramolecular/host–guest chemistry because of their low cost, high biocompatibility, stability, wide availability in multiple sizes, and their promiscuity for binding a range of molecular guests in water. Consequently, CD-based host–guest complexes are often employed as templates for the synthesis of mechanically bonded molecules (mechanomolecules) such as catenanes, rotaxanes, and polyrotaxanes in particular. The conical shape and cyclodirectionality of the CD “bead” gives rise to a symmetry-breaking effect when it is threaded onto a molecular “string”; even symmetrical guests are rendered asymmetric by the presence of an encircling CD host. This review focuses on the stereochemical implications of this symmetry-breaking effect in mechanomolecules, including orientational isomerism, mechanically planar chirality, and topological chirality, as well as how they support applications in regioselective and stereoselective chemical synthesis, the design of molecular machine prototypes, and the development of advanced materials.

Unexpected Polypseudorotaxanes Formed from the Self-assembly of β-Cyclodextrins with Poly( N-isopropylacrylamide) Homo- and Copolymers

Compared with polypseudorotaxanes (PPRs) formed from the self-assembly of β-cyclodextrins (β-CDs) with poly(propylene glycol) (PPG) and γ-CDs with poly( N-isopropylacrylamide) (PNIPAAm), the ratio of the inner cavity size of β-CD to the cross-sectional area of PNIPAAm appears not appropriate for their self-assembly. For a better understanding of the possibility of β-CDs including PNIPAAm and the crystal structure of PPRs formed therefrom, the PNIPAAm homo- and copolymers were subjected to self-assembly with β-CDs in an aqueous solution at room temperature. The results revealed that when β-CDs meet thicker PNIPAAms, the self-assembly takes place, not only giving rise to PPRs by a manner of main-chain inclusion complexation but also presenting the PPRs a matched over-fit crystal structure different from those of either a matched tight-fit β-CD-PPG PPR or a mismatched over-fit γ-CD-PNIPAAm PPR. This is most likely due to the thicker PNIPAAm adapting its unfavorable main-chain cross-sectional area to fit into the cavity of β-CDs by changing the side-chain conformations. Based on the X-ray diffraction patterns, a monoclinic crystal system was created from these PPRs and the unit cell parameters calculated were as follows: a = 15.3 Å, b = 10.3 Å, and c = 21.2 Å; β = 110.3°; and space group P2. It suggested that this matched over-fit crystal structure would possess a Mosaic crystal structure rather than a typical channel-like one.

How Does PHEMA Pass through the Cavity of γ-CDs to Create Mismatched Overfit Polypseudorotaxanes?

A syndiotactic-rich PHEMA oligomer ( rr = 74%, DP = 29, PDI = 1.19) was synthesized and subsequently subjected to self-assembly with a varying amount of γ-CDs in its aqueous solution to create mismatched overfit polypseudorotaxanes (PPRs). The inclusion complexation proceeded in an obvious mismatched manner between the cavity of γ-CDs and the cross-sectional area of an incoming PHEMA chain. The 2D-NOESY NMR analysis provided direct evidence indicating that two adjacent pendant hydroxyethyl groups in PHEMA preferably adopt a curled conformation to pass through the cavity of γ-CDs, giving the PPRs characteristics of a mismatched overfit instead of a matched tight-fit crystal structure. The results suggested that the mutual adaption of pendant side chains of HEMA units with the cavity geometry of γ-CDs would play a dominant role in this unfavorable overfit inclusion complexation besides the size of γ-CDs and the stereoregularity of the PHEMA chain.

Versatile cyclodextrin nanotube synthesis with functional anchors for efficient ion channel formation: design, characterization and ion conductance

Biomimetic ion channels with different materials have been extensively designed to study the dynamics in a confined medium. These channels allow the development of several applications, such as ultra-fast sequencing and biomarker detection. When considering their synthesis, the use of cheap, non-cytotoxic and readily available materials is an increasing priority. Cyclodextrins, in supramolecular architectures, are widely utilized for pharmaceutical and biotechnological applications. Recent work has shown that short nanotubes (NTs) based on alpha-cyclodextrin (α-CD) assemble transient ion channels into membranes without cytotoxicity. In this study, we probe the influence of new cyclodextrin NT structural parameters and chemical modifications on channel formation, stability and electrical conductance. We report the successful synthesis of β- and γ-cyclodextrin nanotubes (β-CDNTs and γ-CDNTs), as evidenced by mass-spectrometry and high-resolution transmission electron microscopy. CDNTs were characterized by their length, diameter and number of CDs. Two hydrophobic groups, silylated or vinylated, were attached along the γ-CDNTs, improving the insertion time into the membrane. All NTs synthesized form spontaneous biomimetic ion channels. The hydrophobic NTs exhibit higher stability in membranes. Electrophysiological measurements show that ion transport is the main contribution of NT conductance and that the ion energy penalty for the entry into these NTs is similar to that of biological channels.

One-pot synthesis of block-copolyrotaxanes through controlled rotaxa-polymerization

The aqueous reversible addition fragmentation chain-transfer (RAFT) copolymerization of isoprene and bulky comonomers, an acrylate and an acrylamide in the presence of methylated β-cyclodextrin was employed for the first time to synthesize block-copolyrotaxanes. RAFT polymerizations started from a symmetrical bifunctional trithiocarbonate and gave rise to triblock-copolymers where the outer polyacrylate/polyacrylamide blocks act as stoppers for the cyclodextrin rings threaded onto the inner polyisoprene block. Statistical copolyrotaxanes were synthesized by RAFT polymerization as well. RAFT polymerization conditions allow control of the composition as well as the sequence of the constituents of the polymer backbone which further effects the CD content and the aqueous solubility of the polyrotaxane.