An Injectable Self-Healing Hydrogel Based on Chain-Extended PEO-PPO-PEO Multiblock Copolymer

Accelerating the remodeling of collagen in cutaneous full-thickness wound using FIR soldering technology with bio-targeting nanocomposites hydrogel

A novel composite wound dressing hydrogel by incorporating single-walled carbon nanotubes and indocyanine green into a dual-crosslinked hydrogel through Schiff base reaction was developed. The objective was to prevent wound infection and enhance the thermal effect induced by laser energy. The hydrogel matrix was constructed using oxidized gelatin, pre-crosslinked with calcium ions, along with carboxymethyl chitosan, crosslinked via Schiff base reaction. Optimization of the blank hydrogel's gelation time, swelling index, degradation rate, and mechanical properties was achieved by adding 0.1% SWCNT and 0.1% ICG. Among them, the SWCNT-loaded hydrogel BCG-SWCNT exhibited superior performance overall: a gelation time of 102 s; a swelling index above 30 after equilibrium swelling; a degradation rate of 100.5% on the seventh day; and a compressive modulus of 8.8 KPa. It displayed significant inhibition against methicillin-resistant Staphylococcus aureus infection in wounds. When combined with laser energy usage, the composite hydrogel demonstrated excellent pro-healing activity in rats.

Phenylboronate-salicylate ester cross-linked self-healing hydrogel composed of modified hyaluronan at physiological pH

Several hydrogels with boronate/diol ester cross-linking have been reported. However, multiple synthetic steps or expensive reagents are required to modify some diol moieties into polymers. Therefore, diol-modified polymers, which are easily and inexpensively prepared via a single-step process, are required for the formation of boronate esters. This study reports a novel hydrogel composed of phenylboronic acid-modified hyaluronic acid and salicylic acid-modified hyaluronic acid. This hydrogel is injectable, can self-heal at physiological pH, and can be easily and inexpensively prepared. The polymer system behaved as a sol at pH 12.0 and a weak gel at pH 9.4 and 11.2, whereas it behaved as a gel over a wide pH range of 4.0-8.2. The viscoelasticity of the system decreased in response to sugar at pH 7.3. Thus, salicylic acid can be considered a promising diol moiety for hydrogel formation via boronate ester cross-linking.

Progress in Pluronic F127 Derivatives for Application in Wound Healing and Repair

Pluronic F127 hydrogel biomaterial has garnered considerable attention in wound healing and repair due to its remarkable properties including temperature sensitivity, injectability, biodegradability, and maintain a moist wound environment. This comprehensive review provides an in-depth exploration of the recent advancements in Pluronic F127-derived hydrogels, such as F127-CHO, F127-NH2, and F127-DA, focusing on their applications in the treatment of various types of wounds, ranging from burns and acute wounds to infected wounds, diabetic wounds, cutaneous tumor wounds, and uterine scars. Furthermore, the review meticulously examines the intricate interaction mechanisms employed by these hydrogels within the wound microenvironment. By elucidating the underlying mechanisms, discussing the strengths and weaknesses of Pluronic F127, analyzing the current state of wound healing development, and expanding on the trend of targeting mitochondria and cells with F127 as a nanomaterial. The review enhances our understanding of the therapeutic effects of these hydrogels aims to foster the development of effective and safe wound-healing modalities. The valuable insights provided this review have the potential to inspire novel ideas for clinical treatment and facilitate the advancement of innovative wound management approaches.

Self-Healing Injectable Hydrogels for Tissue Regeneration

Biomaterials with the ability to self-heal and recover their structural integrity offer many advantages for applications in biomedicine. The past decade has witnessed the rapid emergence of a new class of self-healing biomaterials commonly termed injectable, or printable in the context of 3D printing. These self-healing injectable biomaterials, mostly hydrogels and other soft condensed matter based on reversible chemistry, are able to temporarily fluidize under shear stress and subsequently recover their original mechanical properties. Self-healing injectable hydrogels offer distinct advantages compared to traditional biomaterials. Most notably, they can be administered in a locally targeted and minimally invasive manner through a narrow syringe without the need for invasive surgery. Their moldability allows for a patient-specific intervention and shows great prospects for personalized medicine. Injected hydrogels can facilitate tissue regeneration in multiple ways owing to their viscoelastic and diffusive nature, ranging from simple mechanical support, spatiotemporally controlled delivery of cells or therapeutics, to local recruitment and modulation of host cells to promote tissue regeneration. Consequently, self-healing injectable hydrogels have been at the forefront of many cutting-edge tissue regeneration strategies. This study provides a critical review of the current state of self-healing injectable hydrogels for tissue regeneration. As key challenges toward further maturation of this exciting research field, we identify (i) the trade-off between the self-healing and injectability of hydrogels vs their physical stability, (ii) the lack of consensus on rheological characterization and quantitative benchmarks for self-healing injectable hydrogels, particularly regarding the capillary flow in syringes, and (iii) practical limitations regarding translation toward therapeutically effective formulations for regeneration of specific tissues. Hence, here we (i) review chemical and physical design strategies for self-healing injectable hydrogels, (ii) provide a practical guide for their rheological analysis, and (iii) showcase their applicability for regeneration of various tissues and 3D printing of complex tissues and organoids.

Advances in the stimuli-responsive injectable hydrogel for controlled release of drugs

The stimuli-responsiveness of injectable hydrogel has been drastically developed for the controlled release of drugs and achieved encouraging curative effects in a variety of diseases including wounds, cardiovascular diseases and tumors. The gelation, swelling and degradation of such hydrogels respond to endogenous biochemical factors (such as pH, reactive oxygen species, glutathione, enzymes, glucose) and/or to exogenous physical stimulations (like light, magnetism, electricity and ultrasound), thereby accurately releasing loaded drugs in response to specifically pathological status and as desired for treatment plan and thus improving therapeutic efficacy effectively. In this paper, we give a detailed introduction of recent progresses in responsive injectable hydrogels and focus on the design strategy of various stimuli-sensitivities and their resultant alteration of gel dissociation and drug liberation behaviour. Their application in disease treatment is also discussed. This article is protected by copyright. All rights reserved.

WUWHS 2020 Global Healing Changing Lives, Abu Dhabi, UAE March 8-12

The abstract book contains the abstracts of keynote lectures, global gelebration, focus sessions, symposia, regional view, workshops, sponsored symposia, oral presentations, posters and the index.

An Injectable and Instant Self-Healing Medical Adhesive for Wound Sealing

Designing versatile functional medical adhesives with injectability, self-healing, and strong adhesion is of great significance to achieve desirable therapeutic effects for promoting wound sealing in healthcare. Herein, a self-healing injectable adhesive is fabricated by physical interaction of polyphenol compound tannic acid (TA) and eight-arm poly(ethylene glycol) end-capped with succinimide glutarate active ester (PEG-SG). The hydrogen bonding induced from the structural unit (-CH₂-CH₂-O-) of PEG and catechol hydroxyl (-OH) of TA, accompanied by ester exchange between N-hydroxysuccinimide (-NHS) and amino (-NH₂) of proteins, contributes to self-healing ability and rapid strong adhesion. Notably, the PEG/TA adhesive can repeatedly adhere to rigid porcine tissues, close the coronary artery under a large incision tension, and bear a heavy load of 2 kg. By exhibiting shear-thinning and anti-swelling properties, the PEG/TA adhesive can be easily applied through single-syringe extrusion onto various wounds. The single-channel toothpaste-like feature of the adhesive ensures its storage hermetically for portable usage. Moreover, in vivo operation and histological H&E staining results indicate that the PEG/TA adhesive greatly accelerates wound healing and tissue regeneration in a rat model. With the specialty of injectability, instant self-healing, and long-lasting strong adhesion to facilitate excellent therapeutic effects, the multifunctional PEG/TA adhesive may provide a new alternative for self-rescue and surgical situations.

In situ formation of injectable hydrogels for chronic wound healing

Hydrogels have been widely used in wound healing treatment over the past decade.

Hydrogels Based on Schiff Base Linkages for Biomedical Applications

Schiff base, an important family of reaction in click chemistry, has received significant attention in the formation of self-healing hydrogels in recent years. Schiff base reversibly reacts even in mild conditions, which allows hydrogels with self-healing ability to recover their structures and functions after damages. Moreover, pH-sensitivity of the Schiff base offers the hydrogels response to biologically relevant stimuli. Different types of Schiff base can provide the hydrogels with tunable mechanical properties and chemical stabilities. In this review, we summarized the design and preparation of hydrogels based on various types of Schiff base linkages, as well as the biomedical applications of hydrogels in drug delivery, tissue regeneration, wound healing, tissue adhesives, bioprinting, and biosensors.

Advances in injectable self-healing biomedical hydrogels

In recent years, implantable biomaterials have attracted significant interest owing to their potentials for use in the therapy of physical defects and traumas. Among the implantable biomaterials, hydrogels have received increasing attention for their tunable structures and good rheological behavior. However, the mechanical failures of traditional gel materials during normal operation remain a serious issue. To overcome this problem, hydrogel materials with self-healing and injectable abilities have been developed, with their potential for autonomous self-recovery and minimally invasive implantation. In this paper, the progress of injectable self-healing hydrogels is presented by combining developments in the fundamental knowledge of polymer designs and discussions on the practical biomedical applications of the materials. The mechanisms of different types of self-healing hydrogels are introduced first and their performances are then discussed, followed by a review of the self-healing hydrogels with injectability. The applications of the injectable self-healing hydrogels are discussed in the final section. STATEMENT OF SIGNIFICANCE: This paper provides an overview of the progress of a smart material, injectable self-healing hydrogel, during the past ten years and mainly focuses on its recent development. This paper presents developments in the fundamental knowledge in polymer designs and discussions on the practical biomedical application of the materials, which sheds more light on the advancement of injectable self-healing hydrogels. This paper should be of interest to the readers who are curious about the advances of injectable self-healing hydrogels.

Flow Behavior Prior to Crosslinking: The Need for Precursor Rheology for Placement of Hydrogels in Medical Applications and for 3D Bioprinting

Hydrogels - water swollen cross-linked networks - have demonstrated considerable promise in tissue engineering and regenerative medicine applications. However, ambiguity over which rheological properties are needed to characterize these gels before crosslinking still exists. Most hydrogel research focuses on the performance of the hydrogel construct after implantation, but for clinical practice, and for related applications such as bioinks for 3D bioprinting, the behavior of the pre-gelled state is also critical. Therefore, the goal of this review is to emphasize the need for better rheological characterization of hydrogel precursor formulations, and standardized testing for surgical placement or 3D bioprinting. In particular, we consider engineering paste or putty precursor solutions (i.e., suspensions with a yield stress), and distinguish between these differences to ease the path to clinical translation. The connection between rheology and surgical application as well as how the use of paste and putty nomenclature can help to qualitatively identify material properties are explained. Quantitative rheological properties for defining materials as either pastes or putties are proposed to enable easier adoption to current methods. Specifically, the three-parameter Herschel-Bulkley model is proposed as a suitable model to correlate experimental data and provide a basis for meaningful comparison between different materials. This model combines a yield stress, the critical parameter distinguishing solutions from pastes (100-2000 Pa) and from putties (>2000 Pa), with power law fluid behavior once the yield stress is exceeded. Overall, successful implementation of paste or putty handling properties to the hydrogel precursor may minimize the surgeon-technology learning time and ultimately ease incorporation into current practice. Furthermore, improved understanding and reporting of rheological properties will lead to better theoretical explanations of how materials affect rheological performances, to better predict and design the next generation of biomaterials.

A thermo-sensitive, injectable and biodegradable in situ hydrogel as a potential formulation for uveitis treatment

The thermo-sensitive hydrogels with high drug loading rate achieved sustained drug release over 2 weeks. Histopathological examination of retina confirmed the excellent biocompatibility and effective anti-inflammatory property of the hydrogel.

Thermoresponsive dendronized chitosan-based hydrogels as injectable stem cell carriers

A combination of dendronization and Schiff-base chemistry endows injectable chitosan hydrogels with thermoresponsiveness, self-healing abilities and enhanced mechanical properties under physiological conditions.

A photo-degradable injectable self-healing hydrogel based on star poly(ethylene glycol)-b-polypeptide as a potential pharmaceuticals delivery carrier

As one of the most promising biomaterials, injectable self-healing hydrogels have found broad applications in a number of fields such as local drug delivery. However, controlled release of drugs in hydrogels is still difficult to realize up to now. Here, we report a novel photo-degradable injectable self-healing hydrogel based on the hydrophobic interaction of a biocompatible four-arms star polymer, poly(ethylene glycol)-b-poly(γ-o-nitrobenzyl-l-glutamate). The hydrophobic interaction between poly(γ-o-nitrobenzyl-l-glutamate) not only connects poly(ethylene glycol)-b-poly(γ-o-nitrobenzyl-l-glutamate) together with a crosslink but also provides a hydrophobic domain to encapsulate hydrophobic pharmaceuticals such as doxorubicin (DOX). Due to the dynamic character of the hydrophobic interaction, the hydrogel exhibits excellent injectable and self-healing ability. In particular, the photolabile o-nitribenzyl ester group is cleaved under UV irradiation. As a result, the hydrophobic domain transforms into the hydrophilic one and the embedded DOX is released effectively. An increasing release ratio of DOX dramatically enhances the apoptosis ratio of HeLa cells. We expect these attractive properties may be beneficial to practical applications of the hydrogel as an effective local drug delivery means in a truly physiological environment.

Hydrogel Cross-Linked with Dynamic Covalent Bonding and Micellization for Promoting Burn Wound Healing

A novel hydrogel (HA-az-F127 hydrogel) formed by reacting hydrazide modified hyaluronic acid (HAAD) and benzaldehyde terminated F127 triblock copolymers (BAF127) was developed in this work. The hydrogel with dynamic covalent chemically and micellar physically double-cross-linked networks exhibited rapid gelation and shear thinning properties. Besides, the hydrogel possessed functions, such as adaptable mechanical strength, self-healability, liquid-absorption, or drainage and tissue adhesion, which are important for wound treatment. Studies on cytocompatibility and histopathology by 3-(4,5-dimethyl-thiazol-2-yl)-2,5-diphenyl tetrazolium bromide tests, live/death staining, and cell counting kit 8 assay demonstrated excellent biocompatibility of the hydrogels. After it was applied in the deep partial-thickness burn model, the hydrogel contributed effectively in promoting burn wound repair. Therefore, the HA-az-F127 hydrogel combined multiple functions in one system, demonstrating potential application in promoting burn wound healing.

Stimuli-responsive dendronized polymeric hydrogels through Schiff-base chemistry showing remarkable topological effects

Crowded and thick dendronized polymers enhance the formation of a Schiff-base through thermally-induced collapse or freezing, resulting in hydrogels with different performances.

Injectable self-healing hydrogels formed via thiol/disulfide exchange of thiol functionalized F127 and dithiolane modified PEG

An injectable thermo-responsive hydrogel with excellent mechanical properties which can self-heal under mildly acidic to basic conditions was prepared.

Thermo-responsive polymers and their application as smart biomaterials

This review summarises smart thermo-responsive polymeric materials with reversible and ‘on–off’ remotely switchable properties for a wide range of biomedical and biomaterials applications.