Waterborne Polyurethane Enhanced, Adhesive, and Ionic Conductive Hydrogel for Multifunctional Sensors

Conductive and Eco-friendly Biomaterials-based Hydrogels for Noninvasive Epidermal Sensors: A Review

As noninvasive wearable electronic devices, epidermal sensors enable continuous, real-time, and remote monitoring of various human physiological parameters. Conductive biomaterials-based hydrogels as sensor matrix materials have good biocompatibility, biodegradability, and efficient stimulus response capabilities and are widely applied in motion monitoring, healthcare, and human-machine interaction. However, biomass hydrogel-based epidermal sensing devices still need excellent mechanical properties, prolonged stability, multifunctionality, and extensive practicality. Therefore, this paper reviews the common biomass hydrogel materials for epidermal sensing (proteins, polysaccharides, polyphenols, etc.) and the various types of noninvasive sensing devices (strain/pressure sensors, temperature sensors, glucose sensors, electrocardiograms, etc.). Moreover, this review focuses on the strategies of scholars to enhance sensor properties, such as strength, conductivity, stability, adhesion, and self-healing ability. This work will guide the preparation and optimization of high-performance biomaterials-based hydrogel epidermal sensors.

Compressible, anti-freezing, and ionic conductive cellulose/polyacrylic acid composite hydrogel prepared via AlCl3/ZnCl2 aqueous system as solvent and catalyst

From the perspective of environmental sustainability, introducing cellulose into ionic conductive hydrogel is an inevitable trend for the development of flexible conductive materials. We report a double-network cellulose/polyacrylic acid (Cel/PAA) composite hydrogel based on the dissolving of cellulose by AlCl3/ZnCl2 aqueous system. The Cel/PAA composite hydrogel consists of rigid cellulose chains and flexible polyacrylic acid, which synergistically realize the improvement of the mechanical properties. The AlCl3/ZnCl2 aqueous system not only serves as the green solvent for cellulose, but also the Al3+ and Zn2+ metal ions can be served as a catalyst to activate the initiator for polymerization of acrylic acid. Compared with pure cellulose hydrogel, the compression strain of the Cel/PAA composite hydrogel was significantly improved to 80 %, and its conductivity increased by 28.1 %. In addition, its compression stress was enhanced over 2 times than pure PAA hydrogel. The Cel/PAA composite hydrogel exhibits excellent anti-freezing (-45 °C), weight retention (90 %), and conductivity (2.70 S/m) properties, still maintaining transparency and storage stability in the extreme environment. This work presents a facile strategy to develop an ionic conductive cellulose-based composite hydrogel with good conductivity and mechanical properties, which shows potential for the application fields of flexible sensors and 3D-printing functional materials.

Plant-inspired multifunctional fluorescent cellulose nanocrystals intelligent nanocomposite hydrogel

Intelligent hydrogel has great application potentials in flexible sensing and artificial intelligence devices due to its intrinsic characteristics. However, developing an intelligent hydrogel with favorable properties including high strength, superior toughness, excellent conductivity and ionic sensing via a facile route is still a challenge. Herein, inspired by biologically chelating interactions of phytic acid (PA) in plants, a plant-inspired versatile intelligent nanocomposite hydrogel was readily fabricated by incorporating PA into the interface of fluorescent cellulose nanocrystals (F-CNC). Under PA "molecular bridge", the hydrogel simultaneously realized superflexibility (1000 %), high strength, superb self-healing ability, remarkable fluorescence and chloride ion sensibility as well as good ionic conductivity (2.4 S/m). The hydrogel could be assembled as a flexible sensor for real-time monitoring of human motion with excellent sensitivity and stability since high sensitivity toward both strain and pressure. F-CNC acted as a functional trigger could confer the hydrogel good fluorescence and high sensitivity toward chloride ion. This design confirms the synergy of F-CNC in boosting strength, ionic sensing, and ionic conductivity, addressing a long-standing dilemma among strength, stretchability, and sensitivity for intelligent hydrogel. The one-step incorporating tactic under mild ambient conditions may open an innovative avenue for the construction of intelligent hydrogel with novel properties.

High-Performing Conductive Hydrogels for Wearable Applications

Conductive hydrogels have gained significant attention for their extensive applications in healthcare monitoring, wearable sensors, electronic devices, soft robotics, energy storage, and human-machine interfaces. To address the limitations of conductive hydrogels, researchers are focused on enhancing properties such as sensitivity, mechanical strength, electrical performance at low temperatures, stability, antibacterial properties, and conductivity. Composite materials, including nanoparticles, nanowires, polymers, and ionic liquids, are incorporated to improve the conductivity and mechanical strength. Biocompatibility and biosafety are emphasized for safe integration with biological tissues. Conductive hydrogels exhibit unique properties such as stretchability, self-healing, wet adhesion, anti-freezing, transparency, UV-shielding, and adjustable mechanical properties, making them suitable for specific applications. Researchers aim to develop multifunctional hydrogels with antibacterial characteristics, self-healing capabilities, transparency, UV-shielding, gas-sensing, and strain-sensitivity.

Recent Development of Self-Powered Tactile Sensors Based on Ionic Hydrogels

Hydrogels are three-dimensional polymer networks with excellent flexibility. In recent years, ionic hydrogels have attracted extensive attention in the development of tactile sensors owing to their unique properties, such as ionic conductivity and mechanical properties. These features enable ionic hydrogel-based tactile sensors with exceptional performance in detecting human body movement and identifying external stimuli. Currently, there is a pressing demand for the development of self-powered tactile sensors that integrate ionic conductors and portable power sources into a single device for practical applications. In this paper, we introduce the basic properties of ionic hydrogels and highlight their application in self-powered sensors working in triboelectric, piezoionic, ionic diode, battery, and thermoelectric modes. We also summarize the current difficulty and prospect the future development of ionic hydrogel self-powered sensors.

High-Sensitivity Flexible Sensor Based on Biomimetic Strain-Stiffening Hydrogel

Recently, flexible wearable and implantable electronic devices have attracted enormous interest in biomedical applications. However, current bioelectronic systems have not solved the problem of mechanical mismatch of tissue-electrode interfaces. Therefore, the biomimetic hydrogel with tissue-like mechanical properties is highly desirable for flexible electronic devices. Herein, we propose a strategy to fabricate a biomimetic hydrogel with strain-stiffening property via regional chain entanglements. The strain-stiffening property of the biomimetic hydrogel is realized by embedding highly swollen poly(acrylate sodium) microgels to act as the microregions of dense entanglement in the soft polyacrylamide matrix. In addition, poly(acrylate sodium) microgels can release Na⁺ ions, endowing hydrogel with electrical signals to serve as strain sensors for detecting different human movements. The resultant sensors own a low Young's modulus (22.61-112.45 kPa), high nominal tensile strength (0.99 MPa), and high sensitivity with a gauge factor up to 6.77 at strain of 300%. Based on its simple manufacture process, well mechanical matching suitability, and high sensitivity, the as-prepared sensor might have great potential for a wide range of large-scale applications such as wearable and implantable electronic devices.

Recent Advances in Mechanical Reinforcement of Zwitterionic Hydrogels

As a nonspecific protein adsorption material, a strong hydration layer provides zwitterionic hydrogels with excellent application potential while weakening the interaction between zwitterionic units, leading to poor mechanical properties. The unique anti-polyelectrolyte effect in ionic solution further restricts the application value due to the worsening mechanical strength. To overcome the limitations of zwitterionic hydrogels that can only be used in scenarios that do not require mechanical properties, several methods for strengthening mechanical properties based on enhancing intermolecular interaction forces and polymer network structure design have been extensively studied. Here, we review the works on preparing tough zwitterionic hydrogel. Based on the spatial and molecular structure design, tough zwitterionic hydrogels have been considered as an important candidate for advanced biomedical and soft ionotronic devices.

Fabrication of Janus-type nanocomposites from cellulose nanocrystals for self-healing hydrogels' flexible sensors

Janus bio-nanomaterials have great application potential in functional solid surfactants, probes and flexible sensors. In this manuscript, the sustainable Janus cellulose nanocrystals-type (CNCs-type) nanomaterials were prepared by Pickering emulsion template method. The asymmetric functionalism of Janus nanorods was realized by asymmetrically grafting polypyrrole (PPy) and polydopamine (PDA) onto different sides of CNCs (Janus CNCs-PPy /PDA (JCNs)). JCNs was successfully applied to self-healing nanocomposite hydrogels and further applied to the development of flexible sensors. The self-healing efficiency of nanocomposite hydrogels was 87.2%, and the stress and strain reached 3.50 MPa and 453.45%, respectively. It is worth noting that flexible sensors have been widely used in the field of wearable electronic sensing for real-time monitoring of human movement due to their high sensitivity (gauge factor (GF) = 9.9) and fast response time (260 ms).

Stretchable Ionic Conductors for Soft Electronics

With the rapid development of soft electronics in the era of Internet of Everything (IoE), electrical conductors with stretchability, the indispensable components of soft electronics, have gained new opportunities and also faced increasing challenges. According to the principles of electrical conductivity, stretchable electrical conductors can be divided into electronic conductors and ionic conductors. Different from the stretchable electronic conductors derived from stretchable polymeric matrices integrated with electronically conductive fillers, stretchable ionic conductors are constructed by embedding mobile ions into the crosslinked polymer networks. Therefore, stretchable ionic conductors have received extensive attention and in-depth research in the past decade, thanks to their intrinsic stretchability and electrical conductivity. This review systematically summarizes the achievements on the different categories of stretchable ionic conductors (e.g., hydrogels, ionogels, and liquid-free ion-conductive elastomers), in terms of their design, fabrication, properties, and applications. The advantages and limitations of the different types of stretchable ionic conductors are discussed. Outlooks are also provided to envision the remaining challenges for the further development and practical applications of stretchable ionic conductors. It is expected to arouse inspirations for the design and fabrication of new and high-performance stretchable ionic conductors and advanced soft electronics for the IoE era. This article is protected by copyright. All rights reserved.

Highly Conformal Polymers for Ambulatory Electrophysiological Sensing

Stable ambulatory electrophysiological sensing is widely utilized for smart e-healthcare monitoring, clinical diagnosis of cardiovascular diseases, treatment of neurological diseases, and intelligent human-machine interaction. As the favorable signal interaction platform of electrophysiological sensing, the conformal property of on-skin electrodes is an extremely crucial factor that can affect the stability of long-term ambulatory electrophysiological sensing. From the perspective of materials, to realize conformal contact between electrodes and skin for stable sensing, highly conformal polymers are strongly demanding and attracting ever-growing attention. In this review, we focused on the recent progress of highly conformal polymers for ambulatory electrophysiological sensing, including their synthetic methods, conformal property, and potential applications. Specifically, three main types of highly conformal polymers for stable long-term electrophysiological signals monitoring were proposed, including nature silk fibroin based conformal polymers, marine mussels bio-inspired conformal polymers, and other conformal polymers such as zwitterionic polymers and polyacrylamide. Furthermore, the future challenges and opportunities of preparing highly conformal polymers for on-skin electrodes were also highlighted. This article is protected by copyright. All rights reserved.

Highly transparent, mechanical, and self-adhesive zwitterionic conductive hydrogels with polyurethane as a cross-linker for wireless strain sensors

Zwitterionic hydrogels have attracted a myriad of research interests for their excellent flexibility and biocompatibility as flexible wearable sensors. It is desired to create E-skins that integrate high mechanical strength, sensory sensitivity, and broad adhesion, possessing potential in the fields of intelligent robots and bionic prostheses. In this work, a novel macromolecular cross-linker (MPU) based on waterborne polyurethane (WPU) was designed and applied to synthesize multifunctional conductive hydrogels (PASU-Zn hydrogels). Importantly, in the presence of MPU, the hydrogels exhibited well-balanced mechanical properties (elongation at break 1193%, tensile strength 1.02 MPa, outstanding puncture resistance, and self-recovery abilities). When assembled as wireless strain sensors, PASU-Zn sensors displayed distinguished sensing characteristics to detect mechanotransduction signals of human movements in real-time. Specifically, owing to the dipole-dipole interaction and hydrogen bonding of zwitterions and MPU, the hydrogels have remarkable self-adhesion properties to various surfaces of wood, PDMS, and pigskin, allowing them to stick to skins by themselves without using any adhesive tapes when used. It is deemed that the as-designed zwitterionic hydrogels show great promise for wearable devices and bionic skins.

Simple Preparation of a Waterborne Polyurethane Crosslinked Hydrogel Adhesive With Satisfactory Mechanical Properties and Adhesion Properties

Waterborne polyurethane has been proven to be an ideal additive for the preparation of hydrogels with excellent mechanical properties. This work reports that a satisfactory adhesion of acrylamide hydrogels can be obtained by introducing a large amount of waterborne polyurethane into system. A series of polyurethane hydrogels was prepared by using one-pot method with acrylamide monomer and 2-hydroxymethyl methacrylate end-modified waterborne polyurethane emulsion. The hydrogels exhibit good strength (greater than 30 KPa), wide range of adjustable strain (200%–800%), and excellent compression fatigue resistance. The performance improvement is attributed to the fact that the polyurethane emulsion containing double bonds provides chemical crosslinking and forms polyurethane microregions due to hydrophilic and hydrophobic interactions. The hydrogel shows extensive and repeatable adhesion on diverse substrates. This simple preparation method through polyurethane crosslinked hydrogels is expected to become a low-cost and efficient preparation strategy for hydrogel adhesives.

Hydrogel Adhesive Formed via Multiple Chemical Interactions: From Persistent Wet Adhesion to Rapid Hemostasis

Thus far, robust and durable adhesion capability of hydrogel adhesive in wet environment remains a huge challenge. Here, a chemically-physically double-network cross-linked hydrogel matrix was prepared by first mixing acrylic...