Electrokinetic Investigations of Oriented Cellulose Polymers

Bio-based Pickering emulsifier from mangosteen residues-derived sodium caseinate grafted spherical cellulose nanocrystals: Stability, rheological properties and microstructure studies

This study focuses on the preparation of mangosteen rind-derived nanocellulose via green ascorbic acid hydrolysis. Subsequently, milk protein-grafted nanocellulose particles were developed as a renewable Pickering emulsifier for water-oil stabilization. The stabilizing efficiency of modified nanocellulose (NC-S) at different caseinate (milk protein) concentrations (1.5, 3.0, and 4.0 % w/v) was tested in a water-in-oil emulsion (W/O ratio of 40:60). At a concentration 3.0 % w/v of caseinate (3.0NC-S), the emulsion exhibited a stronger network of adsorption between water, Pickering emulsifier, and oil. This resulted in reduced oil droplet flocculation, increased stability over a longer period, and favorable emulsifying properties, as depicted in the creaming index profile, oil droplet distribution, and rheology analysis. Since 3.0NC-S demonstrated the best colloidal stability, further focus will be placed on its microstructural properties, comparing them with those of mangosteen rind (MG), cellulose, and nanocellulose (NC-L). The XRD profile indicated that both NC-L and NC-S possessed a cellulose nanocrystal structure characterized as type I beta with a high crystallinity index above 60 %. Morphology investigation shown that the NC-L present in the spherical shape of particles with nanosized ranging at diameters of 11.27 ± 0.50 nm and length 11.76 ± 0.46 nm, while modified NC-S showed increase sized at 14.26 ± 4.60 nm and length 14.96 ± 4.94 nm. The increment of particle sizes from NC-L to NC-S indicated 2.82 × 10-15 mg/m2 of surface protein coverage by caseinate functional groups.

Chemistry of Hydroxypropyl Cellulose Oxidized by Two Selective Oxidants

Along with the increased usage of cellulose in the manufacture of novel materials, those of its derivatives that have good solubility in water or organic solvents have become increasingly important. In this study, hydroxypropyl cellulose (HPC), a cellulosic derivative with distinct features, was utilized to investigate how two of the most-selective oxidation methods currently available in the literature act on the constituent OH groups of both the side chain and the anhydroglycosidic unit in HPC. The oxidation reactions were carried out first using TEMPO, sodium hypochlorite, and sodium bromide, then sodium periodate (NaIO4), for 5 h. A combination of these two protocols was applied. The amount of aldehyde and number of carboxylic groups introduced after oxidation was determined, while the changes in the morphological features of oxidized HPC were, additionally, assessed. Furthermore, utilizing Fourier-transform infrared spectra, X-ray diffraction, and thermogravimetric studies, the chemical structure, crystallinity, and thermal stability of the oxidized HPC samples were examined and compared.

An efficient approach to extract nanocrystalline cellulose from sisal fibers: Structural, morphological, thermal and antibacterial analysis

Nanocellulose has been proposed by many researchers as a suitable bio-reinforcement material for the development of sustainable bio-nanocomposites in advanced applications due to its excellent properties. Conventional techniques for extracting nanocellulose from plant biomass are time-consuming and involve chemical wastage. This study aims to extract nanocellulose using simple processes with minimal consumption of chemicals in a minimum time. In the present work, cellulose nanocrystalline has been extracted from sisal fibers efficiently by chemical treatment assisted with steam explosion and mechanical grinding. The morphology of extracted sisal cellulose nanocrystalline (CNC-S) was analyzed by FESEM, whereas the DLS, TEM and AFM confirmed its nanosize. The average aspect ratio and zeta potential (ζ) of CNC-S were measured as 7.4 and -14.3 mV, respectively. The XRD analysis indicated that the crystallinity of the fibers considerably improved from 48.74 % for untreated fibers (UT-S) to 74.28 % for CNC-S. The chemical structure of the fibers was changed as hemicellulose and lignin were found to be eliminated after the chemical treatment which FTIR confirmed. From TGA-DTG results, it was observed that CNC-S has good thermal stability. It was also noticed that CNC-S did not show any antibacterial properties against E. coli and S. aureus due to the complete removal of lignin. This study suggests that the present extraction process can be considered as an efficient process to convert fibers into high performance nanocellulose to be used as potential reinforcing material in advanced applications.

Effect of Low Concentrations of Lithium Chloride Additive on Cellulose-Rich Ultrafiltration Membrane Performance

Various water treatment processes make extensive use of porous polymeric membranes. A key objective in membrane fabrication is to improve membrane selectivity without sacrificing other properties such as permeability. Herein, LiCl (0-2 wt.%) was utilised as a preforming agent in fabricating biomass-derived cellulosic membranes. The fabricated membranes were characterised by dope solution viscosity, surface and cross-sectional morphology, pure water flux, relative molecular mass cut-off (MWCO, 35 kDa), membrane chemistry, and hydrophilicity. The results demonstrated that at the optimum LiCl concentration (0.4 wt.%), there is an interplay of thermodynamic instability and kinetic effects during membrane formation, wherein the membrane morphology and hydrophilicity can be preferably altered and thus lead to the formation of the membrane with better rejection at no detriment to its permeability.

Chitosan Nanoparticles Functionalized Viscose Fabrics as Potentially Durable Antibacterial Medical Textiles

This research proposed two pretreatments of viscose fabrics: oxidation with 2,2,6,6-tetramethylpiperidine-1-oxy radical (TEMPO) and coating with TEMPO-oxidized cellulose nanofibrils (TOCN), to introduce functional groups (COOH and CHO) suitable for irreversible binding of chitosan nanoparticles without and with embedded zinc (NCS and NCS + Zn, respectively) and consequently achieving washing durable antibacterial properties of the chitosan nanoparticles functionalized fabrics. The characterizations of pretreated and chitosan nanoparticles functionalized fabrics were performed by FTIR and XPS spectroscopy, elemental analysis, inductively coupled plasma optical emission spectrometry, zeta potential measurements, scanning electron microscopy, determination of COOH and CHO groups content, and antimicrobial activity under dynamic contact conditions. Influence of pretreatments on NCS and NCS + Zn adsorption, chemical, electrokinetic, and antibacterial properties as well as morphology, and washing durability of NCS and NCS + Zn functionalized fabrics were studied and compared. Washing durability was evaluated through changes in the chitosan and zinc content, zeta potential, and antibacterial activity after 1, 3, and 5 washing cycles. Pretreatments improved washing durability of antibacterial properties of chitosan nanoparticles functionalized fabrics. The NCS and NCS + Zn functionalized pretreated fabrics preserved antibacterial activity against S. aureus after five washing cycles, while antibacterial activity against E. coli was preserved only after one washing cycle in the case NCS + Zn functionalized pretreated viscose fabrics.

Synergistic combination of polyamide-coated paper-based sorptive phase for the extraction of antibiotics in saliva

The development of analytical methods that allow the simultaneous determination of a wide range of analytes with different properties is one of the focuses of attention in Analytical Chemistry. This work describes a proof-of-concept of the synergistic extraction of a planar paper-based sorptive phase modified with a polyamide such as nylon. This as-prepared sorptive phase enables the extraction of six penicillin-derived antibiotics of different polarity from human saliva samples in the same analysis, since the analytes either interact with the paper or with the nylon. The synthesis of the sorptive phase is simple as it only requires dipping the paper into an organic solution of the polymer (i.e., nylon in formic acid). Then, the modified paper-based sorptive phase is introduced in an Eppendorf tube to perform the extraction of the analytes, and subsequent desorption and measurement by liquid chromatography-tandem mass spectrometry. Under the optimized extraction conditions, the method enables the determination of the analytes in saliva samples with limits of detection from 2.4 to 3.7 ng mL^-1. Relative standard deviation (RSD) below 10% for all the target analytes and relative recoveries between 84 and 123% were achieved by using matrix-matched calibration. The results confirm the versatility and the synergistic extraction of the polyamide-coated paper-based sorptive phase, and its potential to be applied in bioanalysis. Moreover, the easy synthesis of the sorptive phase and the low cost of its preparation, as well as the high sample throughput analysis, are some of the main features of the proposed method.

Microfibrillated cellulose from Argania spinosa shells as sustainable solid particles for O/W Pickering emulsions

Microfibrillated cellulose (MFC) from Argan (Argania spinosa) shells was prepared by chemical purification of cellulose, then mechanical disintegration via high pressure homogenization was performed to isolate fibrils of cellulose. Chemical characterization of raw argan shell (AS-R), purified cellulose (AS-C), and argan shell MFC (AS-MFC) included FT-IR, XRD and NMR. Morphological characterization of AS-MFC was assessed using TEM. Next, the use of AS-MFC as oil-in-water (O/W) emulsions stabilizer was investigated. The particle concentration was observed to affect the long-term stability of the emulsions; high concentrations (0.5-1 % w/w) of AS-MFC resulted in emulsions that were thermodynamically stable during 15 days of storage, which was demonstrated by the droplet's size evolution. The suitable oil concentration for a maximum volume of emulsion using 1 % w/w AS-MFC was demonstrated. The results show that AS-MFC is able to stabilize 70 % w/w MCT oil without visual phase separation. Finally, CLSM shows the adsorption of AS-MFC at the oil-water interface and the formation of a 3D network surrounding oil droplets, confirming Pickering emulsion formation and stabilization.

An ecofriendly nanocomposite of bacterial cellulose and hydroxyapatite efficiently removes lead from water

An environmentally friendly nanocomposite adsorbent composed of two renewable biomaterials, bacterial cellulose (BC) nanofibrils and hydroxyapatite (HA) nanocrystals, was synthetized by an in situ wet chemical precipitation technique, using clam shell biowaste as feedstock. HA nanocrystals embedded in an ultrafine BC network were confirmed and characterized trough different instrumental techniques (SEM, FTIR, XRD, EDS, surface charge and BET analysis), describing its nanostructure, chemical composition and thermal stability. The adsorptive removal of lead ions by the nanocomposite was investigated through batch experiments conducted under different pH, contact times and Pb(II) initial concentrations, proving that the process was highly favorable according to the Langmuir isotherm model (monolayer adsorption) with chemisorption as the main mechanism and kinetic data obeying a nonlinear pseudo-second order kinetic model. The developed nanocomposite showed a strong removal capacity of Pb(II) both in batch experiments (192 mg/g) and packed-bed column systems (188 mg/g), placing this new nanocomposite among top-performing BC-based biomaterials for lead removal.

Chemical, Thermo-Mechanical and Antimicrobial Properties of DBD Plasma Treated Disinfectant-Impregnated Wipes during Storage

Disinfectant-impregnated wipes are broadly used in hospitals, as an important approach for infection prevention and control. But their ageing performance has rarely been studied. Untreated and Dielectric Barrier Discharge (DBD) plasma pre-treated wiping materials made of nonwoven 100% polyester (W1), nonwoven 55% cellulose/45% polyester (W2) and woven cotton (W3) were impregnated with a quaternary ammonium compound solution (ADBAC) for 30 min, 3, 7, 15, and 30 days of storage time and characterized in term of chemical, thermo-mechanical and antimicrobial efficacy. X-ray photoelectron spectroscopy analysis on the plasma-treated polyester wipes demonstrates the incorporation of reactive oxygen species on the fiber surface. Laser scanning microscopy demonstrates the plasma etching effect in smoothing the surface of the cotton wipe reducing the adsorption of ADBAC. The result showed no significant changes in breaking force and elongation during storage for W1 and W2. However, plasma treatment affects W3 in weft direction reducing the force at break in water and ADBAC treated wipes. Dynamic mechanical analysis results show that ADBAC and plasma treatment have a significant influence in W1 and W3 viscoelastic properties improving the elastic response limiting the polymeric chains mobility and the non-elastic response due to the etching effect, respectively. Overall, the plasma pre-treatment of ADBAC-impregnated wipes is able to enhance the antimicrobial performance and the storage time of polyester-containing wipes.

Influence of Different Pretreatments on the Antibacterial Properties of Chitosan Functionalized Viscose Fabric: TEMPO Oxidation and Coating with TEMPO Oxidized Cellulose Nanofibrils

The main objective of this study was to obtain chitosan functionalized viscose fabric with improved antibacterial properties and washing durability. In this regard carboxyl and aldehyde groups, as binding points for irreversible chitosan attachment into/onto viscose fabric, were introduced by two different pretreatments: 2,2,6,6-tetramethylpiperidine-1-oxy radical (TEMPO) oxidation and coating with TEMPO oxidized cellulose nanofibrils (TOCN). The Fourier transform infrared spectroscopy, elemental analysis, zeta potential measurements, scanning electron microscopy, breaking strength and antibacterial testing were used to evaluate the influence of these pretreatments on chitosan binding, but also on chemical, electrokinetic, morphological, mechanical and antibacterial properties of pretreated and chitosan functionalized viscose fabrics. Washing durability of chitosan functionalized viscose was monitored through changes in the chitosan content, electrokinetic and antibacterial properties after multiple washing. TOCN coating improves mechanical properties of fabric, while TEMPO oxidation deteriorates them. The results show that both pretreatments improve chitosan adsorption and thus antibacterial properties, which are highly durable to washing. After five washings, the chitosan functionalized pretreated viscose fabrics preserve their antibacterial activity against Staphylococcus aureus, while antibacterial activity against Escherichia coli was lost. TOCN coated and chitosan functionalized viscose fabric is a high value-added product with simultaneously improved antibacterial and mechanical properties, which may find application as medical textiles.

Post-sulfonation of cellulose nanofibrils with a one-step reaction to improve dispersibility

Cellulose nanofibrils (CNF) were sulfonated and the dispersion quality was compared to unfunctionalized and 2,2,6,6-tetramethylpiperdine-1-oxyl radical (TEMPO) post-oxidation treatment of existing CNF (mechanically fibrillated pulp). A post-sulfonation treatment on existing CNF in chlorosulfonic acid and dimethylformamide (DMF) resulted in sulfonated CNF that retained a fibril-like morphology. There was a small decrease in the cellulose crystallinity index for the sulfonated CNF, but this was much lower than the reported regioselective oxidative bisulfite pretreatment method used to make sulfonated CNF. The current approach was extremely quick, and 5min of reaction time was sufficient to result in significant improvements in dispersibility compared to unfunctionalized CNF. The sulfonated CNF and TEMPO oxidized CNF had better dispersibility compared to the unfunctionalized CNF when dispersed in DMF and water, and in many cases the sulfonated CNF had better dispersibility than the TEMPO CNF. It was found that when CNF was dispersed in DMF the TEMPO CNF formed carboxyl dimethylammonium groups, while the sulfonated CNF formed formate groups.

Oscillating streaming potential measurement system for macroscopic surfaces

A method and instrumentation is described capable of streaming potential measurements of various macroscopic surfaces. It differs from other approaches due to the creation of an oscillatory flow of electrolyte solutions through or alongside the sample. This technique offers a wide range of applied flow frequency and amplitude resulting in a fast and highly accurate measurement. This enables the streaming potential detection at rather high ionic strength and in a short time regime, which allows the monitoring of adsorption processes. Streaming potential and applied pressure are measured simultaneously, together with the specific conductivity of the bulk solution, pH value, and temperature. Combining these data, the zeta potential (zeta) for many different material types (fibers, films, foils, granules, and particles) can be calculated. The apparatus comprises reliable and robust measurements, simple handling, a high degree of automation, and advanced software control. With this setup, automated pH and concentration dependent zeta-potential measurements are possible for a variety of analytes and adsorbing species (e.g., ionic strength, surfactants, polyelectrolytes, and proteins); time-resolved measurements are facilitated down to the seconds time scale. The device allows the necessary sample preparation and equilibration outside the instrument using exchangeable sample holders. This offers the opportunity of high sample throughput.