Mesoporous Silica Applications

Surface-coated silica microparticles: In vitro and ex vivo evaluation of a preclinical extended release platform conceived for intravitreal injection

Current standard pharmacological treatment of retinal vascular diseases requires frequent intravitreal injection every 4-12 weeks. Active pharmaceutical ingredients (APIs) with better pharmacokinetics (PK), allowing less frequent administrations, remain to be discovered and developed. In preclinical stage mostly small molecule New Chemical Entities (NCEs) and peptides represent promising candidates. However, they typically suffer from fast clearance from the eye upon intravitreal injection, which confines support of animal models as sufficient exposure over 1-4 weeks in the eye is not reached. Addressing this need of extended-release (XR) formulations to enable such animal models, we hereby present chitosan embedded silica particles in suspension (CHESS). We identified non-mesoporous silica matrix particles as suitable biodegradable XR formulation and established a preparation method to control their degree of condensation, erosion rate and finally the release rate. Applicability for different API candidates was demonstrated by successful embedding of two model small molecules and one model peptide at high drug loads of >20 %, respectively. The ability to control release rate was demonstrated in vitro. High intravitreal mobility, which is a disadvantage of uncoated silica microparticles and other intravitreally applied XR microparticle formulations, was reduced by surface-coating with a polycationic chitosan-derivative. This leads to formation of stable depots in the vitreous after injection, which can be easily separated from the retina, facilitating PK analysis and pharmacodynamic (PD) readouts. Furthermore, we showed good tolerability and low toxicity on ARPE-19 cells.

Lean-Water Hydrogel with Multipolar Sites for Flexible and High-Performance Aqueous Aluminum Ion Batteries

Rechargeable aqueous aluminum ion batteries (AAIBs) offer a promising avenue for achieving safe, high-energy, and low-cost large-scale energy storage applications. However, the practical development of AAIBs is hindered by competitive reduction reactions in the aqueous solution, which lead to insufficient aluminum (Al) deposition and a severe hydrogen evolution reaction (HRE). In this work, an inorganic/organic hybrid hydrogel with a stable silicon-based network and multiple polar sites is successfully fabricated via an in situ sol-gel polymerization method. The preferential formation of hydrogen bonds between the polar functional groups and water molecules effectively reduces the thermodynamic reactivity of water. Furthermore, X-ray photoelectron spectroscopy (XPS) and time of flight secondary ion mass spectrometry (TOF-SIMS) analyses confirm the formation of a stable, inorganic-rich solid electrolyte interface (SEI) layer, which kinetically suppresses undesirable side reactions. This hydrogel electrolyte exhibits a high ionic conductivity of 2.9 × 10-3 S cm-1 at 25 °C, even under lean-water conditions. As a result, Al|hydrogel|potassium nickel hexacyanoferrate (KNHCF) full cells demonstrate excellent cycling performance, delivering a high initial discharge capacity of 74.9 mAh g-1 at 100 mA g-1 and achieving an outstanding capacity retention of 90.0% after 200 cycles. Additionally, pouch cells exhibit stable open-circuit voltage under various mechanical abuse conditions.

Nanostructures as the Substrate for Single-Molecule Magnet Deposition

Anchoringsingle-molecule magnets (SMMs) on the surface of nanostructures is gaining particular interest in the field of molecular magnetism. The accurate organization of SMMs on low-dimensional substrates enables controlled interactions and the possibility of individual molecules' manipulation, paving the route for a broad range of nanotechnological applications. In this comprehensive review article, the most studied types of SMMs are presented, and the quantum-mechanical origin of their magnetic behavior is described. The nanostructured matrices were grouped and characterized to outline to the reader their relevance for subsequent compounding with SMMs. Particular attention was paid to the fact that this process must be carried out in such a way as to preserve the initial functionality and properties of the molecules. Therefore, the work also includes a discussion of issues concerning both the methods of synthesis of the systems in question as well as advanced measurement techniques of the resulting complexes. A great deal of attention was also focused on the issue of surface-molecule interaction, which can affect the magnetic properties of SMMs, causing molecular crystal field distortion or magnetic anisotropy modification, which affects quantum tunneling or magnetic hysteresis, respectively. In our opinion, the analysis of the literature carried out in this way will greatly help the reader to design SMM-nanostructure systems.

Adsorption of 4-(N,N-Dimethylamino)-4'-nitrostilbene on an Amorphous Silica Glass Surface

Stilbenes are a compelling class of organic photoswitches with a high degree of tunability that sensitively depend on their environment. In this study, we investigate the adsorption properties of 4-(N,N-dimethylamino)-4'-nitrostilbene (DANS), a push-pull stilbene, on amorphous silica glass. Plane-wave density functional theory (DFT) calculations are used to understand how the trans and cis isomers of DANS interact with the amorphous surface and which are the most preferred modes of adsorption. Our calculations revealed that the O-H···O hydrogen bonds between the nitro group and hydroxyl groups of the silica surface dominate the intramolecular interaction. In addition to hydrogen bonding, O-H···π interactions with the aromatic ring and double bond play a critical role in adsorption, whereas C-H···O interactions are present, but contribute little. Therefore, both isomers of DANS favor parallel orientations such that not only the functional groups but also the aromatic parts can strongly interact with the glass surface.

Sol-Gel-Controlled Size and Morphology of Mesoporous Silica Microspheres Using Hard Templates

Mesoporous silica microspheres (MPSMs) represent a promising material as a stationary phase for HPLC separations. The use of hard templates provides a preparation strategy for producing such monodisperse silica microspheres. Here, 15 MPSMs were systematically synthesized by varying the sol-gel reaction parameters of water-to-precursor ratio and ammonia concentration in the presence of a porous p(GMA-co-EDMA) polymeric hard template. Changing the sol-gel process factors resulted in a wide range of MPSMs with varying particle sizes from smaller than one to several micrometers. The application of response surface methodology allowed to derive quantitative predictive models based on the process factor effects on particle size, pore size, pore volume, and specific surface area of the MPSMs. A narrow size distribution of the silica particles was maintained over the entire experimental space. Two larger-scale batches of MPSMs were prepared, and the particles were functionalized with trimethoxy(octadecyl) silane for the application as stationary phase in reversed-phases liquid chromatography. The separation of proteins and amino acids was successfully accomplished, and the effect of the pore properties of the silica particles on separation was demonstrated.

Evaluation of separation performance for eggshell-based reversed-phase HPLC columns by controlling particle size and application in quantitative therapeutic drug monitoring

Eggshell-based reversed-phase packing materials were applied to an analytical column for high-performance liquid chromatography. Commercially available eggshell powder was classified by a cyclone system to obtain three types of particles with different diameters (arithmetic mean ± standard deviation: 4.3 ± 3.8, 5.6 ± 3.3, and 9.5 ± 5.5 μm). Sedimentation separation removed tiny particles from each sample, resulting in particles with arithmetic means of 6.6 ± 5.5, 7.3 ± 4.5, and 10.2 ± 5.0 μm, respectively. The unclassified particles and three particle types treated with sedimentation separation were subsequently packed into analytical columns (150 mm × 4.6 mm I.D.), and their separation efficiencies were evaluated by comparing their height equivalent to a theoretical plate (HETP). The column without sedimentation separation exhibited the highest HETP, whereas the columns with sedimentation separation showed better separation efficiency and lower back pressure. The column with the best separation efficiency was applied for the separation of 10 alkylbenzenes and 5 steroids, and all peaks were observed with complete separation (peak resolution: R_S > 1.5). Finally, the column was used for quantitative analysis of voriconazole, an azole antifungal agent, and imatinib, a first-generation molecularly targeted drug for cancer treatment, in spiked whole blood. Excellent accuracy (99.1-102.8%) and precision (0.6-1.9%) were observed for the spiked drugs and long-term stability (>3000 column volumes of mobile phase flow) indicated good applicability of the developed eggshell-based column as an analytical column for routine analyses of therapeutic drugs in blood.

Fabrication process development and basic evaluation of eggshell-based column packing material for reversed-phase preparative separation

Purification of basic drugs in reversed-phase mode is often difficult, mainly due to adsorption of positively charged compounds to the silica gel-based stationary phase. Since this adsorption can be suppressed under alkaline condition, columns with alkali-resistance are required. In addition, compounds with acid-sensitive structures are sometimes degraded during separation on silica gel-based columns which exhibit acidity due to their surface structure. We prepared an alkali-resistant reversed-phase packing material, Eggshell-PMAcO based on eggshells modified with an amphiphilic copolymer, poly(maleic acid-alt-1-octadecene) (PMAcO). The height equivalent to a theoretical plate (HETP) of the Eggshell-PMAcO column was improved by surface treatment with ammonium acetate buffer (900 mM, pH = 3.7), which is an inexpensive reagent, and the retention behavior for hydrophobic compounds was compared to a typical ODS column based on silica gel, resulting in sufficient selectivity of the eggshell-based column for hydrophobic compounds, as indicated by the ratio of retention factors of pentylbenzene and butylbenzene (Eggshell-PMAcO column: 1.55, ODS column: 1.65). Column temperature-dependent retention behavior of naphthalene was investigated in the temperature range from 25 °C to 45 °C, followed by the calculation of thermodynamic parameters. There was little difference in the standard molar enthalpy (Eggshell-PMAcO: -19.6 kJ/mol, ODS: -21.7 kJ/mol). The absolute value of the standard free Gibbs energy for the Eggshell-PMAcO column was much smaller than that of the ODS column (Eggshell-PMAcO: -0.284 kJ/mol, ODS: -13.0 kJ/mol), indicating that the Eggshell-PMAcO column had a weaker retention strength for naphthalene than the ODS column mainly due to the large difference in the standard molar entropy (Eggshell-PMAcO: -64.9 J/mol K, ODS column: -29.2 J/mol K). The retention capacities for imipramine under neutral (water/methanol) and alkaline (0.1% triethylamine water/methanol) conditions were 0.2 mg and 5 mg, respectively, based on injection mass-dependent HETP, retention factor and symmetry factor. Finally, the prepared column was applied to the purification of a building block for nucleic acid drugs. This study demonstrated that reversed-phase columns, which can be fabricated from eggshells and an amphiphilic copolymer in an inexpensive and eco-friendly way, have the ability to purify basic compounds and acid-sensitive compounds.

Rare Earth Elements Uptake by Synthetic Polymeric and Cellulose-Based Materials: A Review

Contemporary industrial processes and the application of new technologies have increased the demand for rare earth elements (REEs). REEs are critical components for many applications related to semiconductors, luminescent molecules, catalysts, batteries, and so forth. REEs refer to a group of 17 elements that have similar chemical properties. REE mining has increased considerably in the last decade and is starting an REE supply crisis. Recently, the viability of secondary REE sources, such as mining wastewaters and acid mine drainage (AMD), has been considered. A strategy to recover REEs from secondary water-related sources is through the usage of adsorbents and ion exchange materials in preconcentration steps due to their presence in low concentrations. In the search for more sustainable processes, the evaluation of synthetic polymers and natural source materials, such as cellulose-based materials, for REE capture from secondary sources should be considered. In this review, the chemistry, sources, extraction, uses, and environmental impact of REEs are briefly described to finally focus on the study of different adsorption/ion exchange materials and their performance in capturing REEs from water sources, moving from commercially available ion exchange resins to cellulose-based materials.

Carbon-based nanocomposite materials with multifunctional attributes for environmental remediation of emerging pollutants

Carbon-based materials are among the most biosynthesized nanocomposites with excellent tunability and multifunctionality features, that other materials fail to demonstrate. Naturally occurring materials, such as alginate (Alg), can be combined and modified by linking the active moieties of various carbon-based materials of interest, such as graphene oxide (GO), carbon nanotubes (CNTs), and mesoporous silica nanocomposite (MSN), among others. Thus, several types of robust nanocomposites have been fabricated and deployed for environmental remediation of emerging pollutants, such as pharmaceutical compounds, toxic dyes, and other environmentally hazardous contaminants of emerging concern. Considering the above critiques and added features of carbon-based nanocomposites, herein, an effort has been made to spotlight the synergies of GO, CNTs, and MSN with Alg and their role in mitigating emerging pollutants. From the information presented in this work, it can be concluded that Alg is a material that has excellent potential. However, its use still requires further tests in different areas and other materials to carry out a holistic investigation that exploits its versatility for environmental remediation purposes.

Quantitative evaluation of reversed-phase packing material based on calcium carbonate microspheres modified with an alternating copolymer

Considering the vulnerability of silica gel to alkaline mobile phases, a highly alkaline stable stationary phase for HPLC is required to separate basic compounds with high separation efficiency. To address this issue, we have developed a high alkaline stable packing material (CaCO₃-PMAcO) based on mesoporous calcium carbonate microspheres modified with poly(maleic acid-alt-1-octadecene). In this study, we report further investigation of the separation performance of CaCO₃-PMAcO column by systematically evaluating the effects of particle size and chromatographic conditions. Based on the theory of the van Deemter equation, the separation efficiency was related to the size of CaCO₃-PMAcO particles (2.9 - 5.7 µm). The evaluation of thermodynamics of retention by changing the column temperature from 20 °C to 45 °C implied that the retention mode was dominated by hydrophobic interaction associated with the exothermic enthalpy changes (-11.1 to -12.5 kJ/mol). The results of column selectivity tests revealed that the CaCO₃-PMAcO column had hydrophobic selectivity comparable to C₁₈ silica gel columns (α_P/B; CaCO₃-PMAcO column: 1.53, C₁₈ column: 1.69), and higher shape/steric selectivity (α_Tri/Ter; CaCO₃-PMAcO column: 1.56, C₁₈ column: 0.955). In practice, the CaCO₃-PMAcO column could be applied to the separation of not only alkylbenzenes and polycyclic aromatic hydrocarbons, but also to basic tricyclic antidepressants by using an alkaline mobile phase (pH 12).

Silica/Protein and Silica/Polysaccharide Interactions and Their Contributions to the Functional Properties of Derived Hybrid Wound Dressing Hydrogels

Multifunctional and biocompatible hydrogels are on the focus of wound healing treatments. Protein and polysaccharides silica hybrids are interesting wound dressing alternatives. The objective of this review is to answer questions such as why silica for wound dressings reinforcement? What are the roles and contributions of silane precursors and silica on the functional properties of hydrogel wound dressings? The effects of tailoring the porous, morphological, and chemical characteristics of synthetic silicas on the bioactivity of hybrid wound dressings hydrogels are explored in the first part of the review. This is followed by a commented review of the mechanisms of silica/protein and silica/polysaccharide interactions and their impact on the barrier, scaffold, and delivery matrix functions of the derived hydrogels. Such information has important consequences for wound healing and paves the way to multidisciplinary researches on the production, processing, and biomedical application of this kind of hybrid materials.

Synthesis and characterization of gold nanorods coated by mesoporous silica MCM-41 as a platform bioapplication in photohyperthermia

Gold nanoparticles have been widely investigated for biomedical applications due to their optical properties. These particles present the interesting feature of absorbing light when stimulated with laser radiation to generate heating. Among the possible morphologies for synthetic gold nanoparticles, gold nanorods have properties of great interest for applications in the photohyperthermia processes. Due to their morphology, gold nanorods can absorb light at longer wavelengths comprising specific regions of the electromagnetic spectrum, such as the region of the biological window, in which laser radiation has less interaction with tissues. However, these nanoparticles present limitations in biomedical applications, such as low colloidal and thermal stabilities that can be overcome by coating the gold nanorods with silica MCM-41. The silicate covering can provide greater stability for gold nanorods and allow multifunctionality in treating different diseases through photohyperthermia. This work developed a specific chemical route through seed and growth solutions to synthesize gold nanorods with controlled particle size, rod morphology, and silica covering for photohyperthermia applications. The synthesized samples were characterized through a multi-technique approach that successfully demonstrated the presence of gold nanorods inside the silica coating, presenting high stability and desirable textural and morphological characteristics for bioapplications. Furthermore, silica-coated gold nanorods exhibit high biocompatibility and great performance in generating therapeutic heating by absorbing laser radiation in the biological window range, making the system developed in this work a promising agent in photohyperthermia.

Super-Resolution Defocusing Nanoparticle Image Velocimetry Utilizing Spherical Aberration for Nanochannel Flows

Understanding fluid flows and mass transport in nanospaces is becoming important with recent advances in nanofluidic analytical devices utilizing nanopores and nanochannels. In the present study, we developed a super-resolution and fast particle tracking method utilizing defocusing images with spherical aberration and demonstrated the measurement of nanochannel flow. Since the spherical aberration generates the defocusing nanoparticle image with diffraction rings, the position of fluorescent nanoparticles was determined from the radius of the diffraction ring. Effects of components of an optical system on the diffraction ring of the defocusing image were investigated and optimized to achieve the spatial resolution exceeding the optical diffraction limit. We found that there is an optimal magnitude of spherical aberration to enhance the spatial resolution. Furthermore, we confirmed that nanoparticles with diameters in the order of 10¹ nm, which is much smaller than the light wavelength, do not affect the defocusing images and the spatial resolution because such nanoparticles can be regarded as point light sources. At optimized conditions, we achieved a spatial resolution of 19 nm and a temporal resolution of 160 μs, which are sufficient for the nanochannel flow measurements. We succeeded in the measurement of pressure-driven flow in a nanochannel with a depth of 370 nm using 67 nm fluorescent nanoparticles. The measured nanoparticle velocities exhibited a parabolic flow profile with a slip velocity even at the hydrophilic glass surface but with an average velocity similar to the Hagen-Poiseuille law. The method will accelerate researches in the nanofluidics and other related fields.

Development of local anesthetic drug delivery system by administration of organo-silica nanoformulations under ultrasound stimuli: in vitro and in vivo investigations

The development of local anesthetic (LA) system is the application of commercial drug for the pain management that indorses the reversible obstructive mechanism of neural transmission through preventing the innervation process in human peripheral nerves. Ropivacaine (RV) is one of the greatest frequently used LA s with the actions of long-lasting and low-toxicity for the post-operative pain management. In this work, we have approached novel design and development of glycosylated chitosan (GCS) encapsulated mesoporous silica nanoparticles (GCS-MONPs)-based nano-scaffold for sustainable distributions and controlled/supported arrival of stacked RV for targeting sites, which can be activated by either outer ultrasound activating to discharge the payload, foundation on-request and dependable analgesia. The structural and morphology analyses result established that prepared nano-formulations have successful molecular interactions and RV loaded spherical morphological structures. The drug release profile of developed nanostructure with ultrasound-activation has been achieved 50% of drug release in 2 h and 90% of drug release was achieved in 12 h, which displays more controlled release when compared to free RV solution. The in vitro cell compatibility analysis exhibited GCS-MONPs with RV has improved neuron cell survival rates when compared to other samples due to its porous surface and suitable biopolymer proportions. The analysis of ex vitro and in vivo pain relief analysis demonstrated treated animal models have high compatibility with GCS-MONPs@RV, which was confirmed by histomorphology. This developed MONPs based formulations with ultrasound-irradiation gives a prospective technique to clinical agony the board through on-request and dependable help with discomfort.

Magnetic Characterization and Moderate Cytotoxicity of Magnetic Mesoporous Silica Nanocomposite for Drug Delivery of Naproxen

In this study, we describe the magnetic and structural properties and cytotoxicity of drug delivery composite (DDC) consisting of hexagonally ordered mesoporous silica, iron oxide magnetic nanoparticles (Fe2O3), and the drug naproxen (Napro). The nonsteroidal anti-inflammatory drug (NSAID) naproxen was adsorbed into the pores of MCM-41 silica after the ultra-small superparamagnetic iron oxide nanoparticles (USPIONs) encapsulation. Our results confirm the suppression of the Brownian relaxation process caused by a "gripping effect" since the rotation of the whole particle encapsulated in the porous system of mesoporous silica was disabled. This behavior was observed for the first time, to the best of our knowledge. Therefore, the dominant relaxation mechanism in powder and liquid form is the Néel process when the rotation of the nanoparticle's magnetic moment is responsible for the relaxation. The in vitro cytotoxicity tests were performed using human glioma U87 MG cells, and the moderate manifestation of cell death, although at high concentrations of studied systems, was observed with fluorescent labeling by AnnexinV/FITC. All our results indicate that the as-prepared MCM-41/Napro/Fe2O3 composite has a potential application as a drug nanocarrier for magnetic-targeted drug delivery.

Preparation of Functionalized Mesoporous Silica as a Novel Carrier and Immobilization of Laccase

Amino-modified mesoporous silica (SBA-15-NH₂) was prepared by hydrothermal method, which is a kind of excellent carrier for enzyme immobilization. The structure of SBA-15 was characterized by SEM and FTIR, which proved that amino group was successfully attached to the surface of SBA-15. The carrier had good mesoporous structure proved by nitrogen adsorption and desorption test. Using SBA-15-NH₂ as the carrier, the optimal conditions of laccase immobilization by two different cross-linking methods were explored. At the same time, the properties of the immobilized enzyme and free enzyme were compared. The results showed that the activity of immobilized laccase by two-step method (2977.5 U/g) was much higher than that by one-step method (239.5 U/g). The optimal conditions were as follows: free laccase (35°C, pH=4.5), two-step immobilized laccase (40°C, pH=4.0), one-step immobilized laccase (35°C, pH=4.0). The two-step method was more adaptable to temperature. The pH adaptation range of the immobilized enzyme is wider, and the thermal stability is greatly enhanced. After five cycles of repeated reaction, the residual enzyme activity of two-step and one-step methods was 56% and 43% of the original. The treatment of simulated wastewater containing 2,4-dichlorophenol (2,4-DCP) by immobilized laccase was also studied. Under optimum conditions (40°C, pH=5.0, 20 mg/L), the removal of 2,4-DCP reached 89.06%. The immobilized laccase is really effective for treatment of 2,4-DCP-containing wastewater.

A Brief Overview of Recent Progress in Porous Silica as Catalyst Supports

Porous silica particles have shown applications in various technological fields including their use as catalyst supports in heterogeneous catalysis. The mesoporous silica particles have ordered porosity, high surface area, and good chemical stability. These interesting structural or textural properties make porous silica an attractive material for use as catalyst supports in various heterogeneous catalysis reactions. The colloidal nature of the porous silica particles is highly useful in catalytic applications as it guarantees better mass transfer properties and uniform distribution of the various metal or metal oxide nanocatalysts in solution. The catalysts show high activity, low degree of metal leaching, and ease in recycling when supported or immobilized on porous silica-based materials. In this overview, we have pointed out the importance of porous silica as catalyst supports. A variety of chemical reactions catalyzed by different catalysts loaded or embedded in porous silica supports are studied. The latest reports from the literature about the use of porous silica-based materials as catalyst supports are listed and analyzed. The new and continued trends are discussed with examples.

Biomechanical analysis of intact versus ruptured Poly Implant Prothèse breast implants

Despite there being many studies that have evaluated breast implant rupture, there is no consensus about causes and incidence. Most studies lack a multifactorial analysis of what causes breast implants to rupture. To fill this gap, an experimental protocol was developed to compare ruptured and intact Poly Implant Prothèse (PIP) breast implants from the same woman. These conditions guarantee that the physical/biological variables are the same for each pair of ruptured and intact implants. A total of 1008 samples from 22 PIP explants (11 intact and 11 ruptured) and three control PIP implants were analysed. The mechanical properties (tensile strength) of the ruptured and intact implants were compared according to brand, lot, implantation time and demographic conditions. In general, statistically significant differences were found between the intact and ruptured PIP implants. Ruptured implants were thinner (0.73 ± 0.10 mm versus 0.91 ± 0.11 mm) and weaker (7.42 ± 2.65 MPa versus 9.59 ± 2.37 MPa) than intact implants. Intact and ruptured implants have shown distinct mechanical behaviours and variations in thickness. Our understanding is that these differences may be associated with the typical manufacturing process of breast implant shells. These results stress the importance of thorough control of the shell thickness. Given its relevance, shell thickness should be used as a quality control measure for homologation purposes. Thus, the homogeneity of the shell should be considered as a relevant parameter during the manufacturing process. This will translate into an improved quality of life for patients and will potentiate safer and longer lasting products.

Silicon diimide gel as an efficient stationary phase in thin layer chromatography for acid-sensitive organic compounds

We report the use of mesoporous silicon diimide gel as a basic stationary phase in thin layer chromatography for the characterisation and purification of acid-sensitive compounds. The gel is prepared by a simple sol-gel process and exhibits a large specific surface area, almost monodisperse pores and basic properties due to free-hanging amine groups.

Porous Inorganic Drug Delivery Systems-a Review

Innovative methods and materials have been developed to overcome limitations associated with current drug delivery systems. Significant developments have led to the use of a variety of materials (as excipients) such as inorganic and metallic structures, marking a transition from conventional polymers. Inorganic materials, especially those possessing significant porosity, are emerging as good candidates for the delivery of a range of drugs (antibiotics, anticancer and anti-inflammatories), providing several advantages in formulation and engineering (encapsulation of drug in amorphous form, controlled delivery and improved targeting). This review focuses on key selected developments in porous drug delivery systems. The review provides a short broad overview of porous polymeric materials for drug delivery before focusing on porous inorganic materials (e.g. Santa Barbara Amorphous (SBA) and Mobil Composition of Matter (MCM)) and their utilisation in drug dosage form development. Methods for their preparation and drug loading thereafter are detailed. Several examples of porous inorganic materials, drugs used and outcomes are discussed providing the reader with an understanding of advances in the field and realistic opportunities.

Porous nano-structured micro-granules from silica-milk bi-colloidal suspension: Synthesis and characterization

Synthesis and characterization of nano-structured porous granules, with fairly defined morphology and porosity, is crucial because such granules are widely utilized for various technological applications. However, an easy, one-step, economic synthesis protocol for large scale production is extremely desirable. In the present work, we have reported the synthesis and characterization of the nano-structured micro-granules using aerosol drying of bi-colloidal suspension of nano-silica and milk. Removal of soft organic component from the granules results in formation of meso and macro pores with moderate specific surface area. Granule morphology and porosity depends strongly on the concentration ratio of the individual components in the drying aerosol as well as the interaction between them.

Silica nanoparticle based techniques for extraction, detection, and degradation of pesticides

Silica nanoparticles (SiNPs) find applications in the fields of drug delivery, catalysis, immobilization and sensing. Their synthesis can be mediated in a facile manner and they display broad range compatibility and stability. Their existence in the form of spheres, wires and sheets renders them suitable for varied purposes. This review summarizes the use of silica nanostructures in developing techniques for extraction, detection and degradation of pesticides. Silica nanostructures on account of their sorbent properties, porous nature and increased surface area allow effective extraction of pesticides. They can be modified (with ionic liquids, silanes or amines), coated with molecularly imprinted polymers or magnetized to improve the extraction of pesticides. Moreover, they can be altered to increase their sensitivity and stability. In addition to the analysis of pesticides by sophisticated techniques such as High Performance Liquid Chromatography or Gas chromatography, silica nanoparticles related simple detection methods are also proving to be effective. Electrochemical and optical detection based on enzymes (acetylcholinesterase and organophosphate hydrolase) or antibodies have been developed. Pesticide sensors dependent on fluorescence, chemiluminescence or Surface Enhanced Raman Spectroscopic responses are also SiNP based. Moreover, degradative enzymes (organophosphate hydrolases, carboxyesterases and laccases) and bacterial cells that produce recombinant enzymes have been immobilized on SiNPs for mediating pesticide degradation. After immobilization, these systems show increased stability and improved degradation. SiNP are significant in developing systems for effective extraction, detection and degradation of pesticides. SiNPs on account of their chemically inert nature and amenability to surface modifications makes them popular tools for fabricating devices for 'on-site' applications.

Stability and geometry of silica nano-ribbons (SNRs): a first-principles study

Silica based materials are attractive because of their versatility and their unique structures and properties, which have led to numerous applications of silica in a range of fields. Recently, various low-dimensional silica materials have been synthesized experimentally. Here we present a first-principles study on the geometry and stability of novel low-dimensional silica nano-ribbons (SNRs) using density-functional theory (DFT) with van der Waals interactions (optB88-vdW). SNRs of various widths with different surface groups, and with the geometry of hexagonal rings and squares, were taken into consideration. An atomically flat ribbon with mixing squares and rings is also included. The calculations showed high stability for the single layer and bilayer silica ribbons, both containing hexagonal rings. The calculations also revealed a high flexibility of silica chains. The local structure and chemical bonding were carefully analyzed. Electronic band structure calculations showed an insulating nature of the SNRs with energy gaps of about 5.0 to 6.0 eV, which are determined by nonbonding and anti-bonding O 2p states.

Graphene oxide coated Fe3O4@mSiO2 NPs for magnetic controlled bioimaging

GO coated Fe₃O₄@mSiO₂ NPs are developed for the protection of encapsulated fluorescent molecules and target-directed move under magnetic field.

Silaffins in Silica Biomineralization and Biomimetic Silica Precipitation

Biomineralization processes leading to complex solid structures of inorganic material in biological systems are constantly gaining attention in biotechnology and biomedical research. An outstanding example for biomineral morphogenesis is the formation of highly elaborate, nano-patterned silica shells by diatoms. Among the organic macromolecules that have been closely linked to the tightly controlled precipitation of silica in diatoms, silaffins play an extraordinary role. These peptides typically occur as complex posttranslationally modified variants and are directly involved in the silica deposition process in diatoms. However, even in vitro silaffin-based peptides alone, with and without posttranslational modifications, can efficiently mediate biomimetic silica precipitation leading to silica material with different properties as well as with encapsulated cargo molecules of a large size range. In this review, the biomineralization process of silica in diatoms is summarized with a specific focus on silaffins and their in vitro silica precipitation properties. Applications in the area of bio- and nanotechnology as well as in diagnostics and therapy are discussed.

Solid mesostructured polymer-surfactant films at the air-liquid interface

Pioneering work by Edler et al. has spawned a new sub-set of mesostructured materials. These are solid, self-supporting films comprising surfactant micelles encased within polymer hydrogel; composite polymer-surfactant films can be grown spontaneously at the air-liquid interface and have defined and controllable mesostructures. Addition of siliconalkoxide to polymer-surfactant mixtures allows for the growth of mesostructured hybrid polymer-surfactant silica films that retain film geometry after calcinations and exhibit superior mechanical properties to typically brittle inorganic films. Growing films at the air-liquid interface provides a rapid and simple means to prepare ordered solid inorganic films, and to date the only method for generating mesostructured films thick enough (up to several hundred microns) to be removed from the interface. Applications of these films could range from catalysis to encapsulation of hydrophobic species and drug delivery. Film properties and mesostructures are sensitive to surfactant structure, polymer properties and polymer-surfactant phase behaviour: herein it will be shown how film mesostructure can be tailored by directing these parameters, and some interesting analogies will be drawn with more familiar mesostructured silica materials.

A single hybrid optical sensor based on nanoporous silica type SBA-15 for detection of Pb2+and I−in aqueous media

Simple two-steps post synthesis procedure achieved the functionalized nanoporous SBA-15 as a single hybrid optical sensor for detecting Pb²⁺and I⁻ions in aqueous media.

Grafting trimethylaluminum and its halogen derivatives on silica: general trends for 27Al SS-NMR response from first principles calculations

²⁷Al solid-state NMR spectrum and parameters for various types of Al monomeric and dimeric alkyl and halogen compounds grafted on silica are interpreted based on the trends obtained from first-principles calculations.