Capillary gel electrophoresis

Investigating the Merits of Microfluidic Capillary Zone Electrophoresis-Mass Spectrometry (CZE-MS) in the Bottom-Up Characterization of Larger RNAs

Established bottom-up approaches for the characterization of nucleic acids (NAs) rely on the strand-cleavage activity of nucleotide-specific endonucleases to generate smaller oligonucleotides amenable to gas-phase sequencing. The complexity of these hydrolytic mixtures calls for the utilization of a front-end separation to facilitate full mass spectrometric (MS) characterization. This report explored the merits of microfluidic capillary zone electrophoresis (CZE) as a possible alternative to common liquid chromatography techniques. An oligonucleotide ladder was initially employed to investigate the roles of fundamental analyte features and experimental parameters in determining the outcome of CZE-MS analyses. The results demonstrated the ability to fully resolve the various rungs into discrete electrophoretic peaks with full-width half-height (FWHH) resolution that was visibly affected by the overall amount of material injected into the system. Analogous results were obtained from a digestion mixture prepared by treating yeast tRNAPhe (75 nt) with RNase T1, which provided several well-resolved peaks in spite of the increasing sample heterogeneity. The regular shapes of such peaks, however, belied the fact that most of them contained sets of comigrating species, as shown by the corresponding MS spectra. Even though it was not possible to segregate each species into an individual electrophoretic peak, the analysis still proved capable of unambiguously identifying a total of 29 hydrolytic products, which were sufficient to cover 96% of the tRNAPhe's sequence. Their masses accurately reflected the presence of modified nucleotides characteristic of this type of substrate. The analysis of a digestion mixture obtained from the 364 nt HIV-1 5'-UTR proved to be more challenging. The electropherogram displayed fewer well-resolved peaks and significantly greater incidence of product comigration. In this case, fractionating the highly heterogeneous mixture into discrete bands helped reduce signal suppression and detection bias. As a result, the corresponding MS data enabled the assignment of 248 products out of the possible 513 predicted from the 5'-UTR sequence, which afforded 100% sequence coverage. This figure represented a significant improvement over the 36 total products identified earlier under suboptimal conditions, which afforded only 57% coverage, or the 83 observed by direct infusion nanospray-MS (72%). These results provided a measure of the excellent potential of the technique to support the bottom-up characterization of progressively larger NA samples, such as putative NA therapeutics and mRNA vaccines.

Pluronic F-127 as the buffer additive in capillary entangled polymer electrophoresis: some fundamental aspects

Polymeric macromolecules of well-designed structures and specific properties open promising directions in the capillary entangled polymer electrophoresis. Pluronic F-127, as a thermoassociating polymer, possesses some unique properties that can be utilized in capillary entangled polymer electrophoresis of amino acids, peptides and proteins. In this study, we studied properties of Pluronic F-127 polymer as an additive to BGE for the separation of peptides and proteins. The influence of the thermoassociation on separation selectivity was studied. The addition of Pluronic caused severe instabilities of the electrical current and the signal of the UV detector. This study reveals remarkable positive effect of a low pressure applied to the inlet buffer vial during the analysis, which apparently stabilizes the electrical current and the detector signal. The effect of hydrodynamic flow induced by the pressure applied on the separation efficiency was studied and the significance of this effect was discussed. Pluronic F-127, as a representative of synthetic macromolecules, was compared with dextran, as a representative of natural polymers, in terms of separation power, selectivity and repeatability of migration times.

DNA migration mechanism analyses for applications in capillary and microchip electrophoresis

In 2009, electrophoretically driven DNA separations in slab gels and capillaries have the sepia tones of an old-fashioned technology in the eyes of many, even while they remain ubiquitously used, fill a unique niche, and arguably have yet to reach their full potential. For comic relief, what is old becomes new again: agarose slab gel separations are used to prepare DNA samples for "next-gen" sequencing platforms (e.g. the Illumina and 454 machines) - dsDNA molecules within a certain size range are "cut out" of a gel and recovered for subsequent "massively parallel" pyrosequencing. In this review, we give a Barron lab perspective on how our comprehension of DNA migration mechanisms in electrophoresis has evolved, since the first reports of DNA separations by CE ( approximately 1989) until now, 20 years later. Fused-silica capillaries and borosilicate glass and plastic microchips quietly offer increasing capacities for fast (and even "ultra-fast"), efficient DNA separations. While the channel-by-channel scaling of both old and new electrophoresis platforms provides key flexibility, it requires each unique DNA sample to be prepared in its own micro or nanovolume. This Achilles' heel of electrophoresis technologies left an opening through which pooled sample, next-gen DNA sequencing technologies rushed. We shall see, over time, whether sharpening understanding of transitions in DNA migration modes in crosslinked gels, nanogel solutions, and uncrosslinked polymer solutions will allow electrophoretic DNA analysis technologies to flower again. Microchannel electrophoresis, after a quiet period of metamorphosis, may emerge sleeker and more powerful, to claim its own important niche applications.

On-column capture of a specific protein separated by SDS-CGE using an immunological reaction on magnetic beads

The on-column capture of a specific protein using magnetic beads was applied to SDS-CGE. In a preliminary study, an immunological reaction in the presence of SDS, using a batch method, was attempted. Carbonic anhydrase (CA), alpha-lactalbumin (LA), and HSA were denatured by heating in the presence of SDS and 2-mercaptoethanol, and then reacted with anti-CA that had been immobilized on magnetic beads. Not only native CA, but also the denatured CA reacted with anti-CA, even in the presence of SDS. Therefore, the on-column capture of denatured CA separated by SDS-CGE was attempted using a two-point detection technique. A mixture of proteins, containing LA, CA, and HSA, were separated by SDS-CGE according to their Mr. The CA was then specifically captured on anti-CA-immobilized magnetic beads, which were packed between two detection windows in the capillary column, during the electrophoresis. The results show that the technique leads to information similar to that obtained by Western blotting, i.e., a protein can be identified by its Mr and reaction with its antibody.

Separation methods that are capable of revealing blood–brain barrier permeability

The objective of this review is to emphasize the application of separation science in evaluating the blood-brain barrier (BBB) permeability to drugs and bioactive agents. Several techniques have been utilized to quantitate the BBB permeability. These methods can be classified into two major categories: in vitro or in vivo. The in vivo methods used include brain homogenization, cerebrospinal fluid (CSF) sampling, voltametry, autoradiography, nuclear magnetic resonance (NMR) spectroscopy, positron emission tomography (PET), intracerebral microdialysis, and brain uptake index (BUI) determination. The in vitro methods include tissue culture and immobilized artificial membrane (IAM) technology. Separation methods have always played an important role as adjunct methods to the methods outlined above for the quantitation of BBB permeability and have been utilized the most with brain homogenization, in situ brain perfusion, CSF sampling, intracerebral microdialysis, in vitro tissue culture and IAM chromatography. However, the literature published to date indicates that the separation method has been used the most in conjunction with intracerebral microdialysis and CSF sampling methods. The major advantages of microdialysis sampling in BBB permeability studies is the possibility of online separation and quantitation as well as the need for only a small sample volume for such an analysis. Separation methods are preferred over non-separation methods in BBB permeability evaluation for two main reasons. First, when the selectivity of a determination method is insufficient, interfering substances must be separated from the analyte of interest prior to determination. Secondly, when large number of analytes is to be detected and quantitated by a single analytical procedure, the mixture must be separated to each individual component prior to determination. Chiral separation in particular can be essential to evaluate the stereo-selective permeation and distribution of agents into the brain. In conclusion, the usefulness of separation methods during BBB permeability evaluation is immense and more application of these methods is foreseen in the future.

Recent developments in DNA electrophoretic separations

DNA electrophoresis is now a fairly mature technology. Nevertheless, as we approach the 21st century, new ideas are frequently suggested that could lead to a revolution for DNA sequencing and mapping. Here, we review some of the novel concepts that have been studied since ca. 1990. Our review focuses on new separation mechanisms, new sieving matrices and recent conceptual advances.

Buffer additives other than the surfactant sodium dodecyl sulfate for protein separations by capillary electrophoresis

The different compounds utilized as additives to the electrolyte solutions employed in protein capillary zone electrophoresis (CZE) for minimizing protein-capillary wall interactions, for improving selectivity and resolution and for controlling the electroosmotic flow are reviewed. The dependence of the electroosmotic flow on the different variables that can be affected by the incorporation of an additive into the electrolytic solution is discussed. A list of the most effective additives employed for protein separations by CZE is reported in Appendix A.

Gel electrophoresis of DNA fragments in narrow-bore capillaries

In this work, we studied the behavior of electrophoretic columns, having an inner diameter (ID) of 2-10 microm, filled with a cross-linked polyacrylamide gel matrix. The usefulness of these columns for DNA sequencing is discussed. Evaluation of column performance included tests of gel stability and migration time reproducibility. Confocal laser-induced fluorescence (LIF)-detection was employed utilizing a 488 nm argon ion laser for separations of C- and T-terminated DNA Sanger fragments. Reducing the inner diameter of the column from 50 microm to 10 microm resulted in an approximately eightfold increase in lifetime, under conditions in which the columns were subjected to a field strength of 1000 V/cm. The 10 microm ID columns were utilized for separation of Sanger fragments, and adequate detection sensitivity was obtained by stacking of the fragments from a deionized sample solution. A linear algorithm for retention data synchronization between individual electropherograms was employed to provide a route towards a reliable automated base calling protocol.