(1)H, (13)C, (19)F and (11)B NMR spectral reference data of some potassium organotrifluoroborates

Water-stable boroxine structure with dynamic covalent bonds

Boroxines are significant structures in the production of covalent organic frameworks, anion receptors, self-healing materials, and others. However, their utilization in aqueous media is a formidable task due to hydrolytic instability. Here we report a water-stable boroxine structure discovered from 2-hydroxyphenylboronic acid. We find that, under ambient environments, 2-hydroxyphenylboronic acid undergoes spontaneous dehydration to form a dimer with dynamic covalent bonds and aggregation-induced enhanced emission activity. Intriguingly, upon exposure to water, the dimer rapidly transforms into a boroxine structure with excellent pH stability and water-compatible dynamic covalent bonds. Building upon these discoveries, we report the strong binding capacity of boroxines toward fluoride ions in aqueous media, and develop a boroxine-based hydrogel with high acid-base stability and reversible gel-sol transition. This discovery of the water-stable boroxine structure breaks the constraint of boroxines not being applicable in aqueous environments, opening a new era of researches in boroxine chemistry.

Azido-alkynylation of alkenes through radical-polar crossover

We report an azido-alkynylation of alkenes allowing a straightforward access to homopropargylic azides by combining hypervalent iodine reagents and alkynyl-trifluoroborate salts. The design of a photocatalytic redox-neutral radical polar crossover process was key to develop this transformation. A variety of homopropargylic azides possessing electron-rich and -poor aryls, heterocycles or ether substituents could be accessed in 34-84% yield. The products are synthetically useful building blocks that could be easily transformed into pyrroles or bioactive amines.

Anion Recognition by Benzoxaborole

The binding types (H-bonding or coordinate) and stability constants for complexes of 11 mono- and di-anions with benzoxaborole (1) were determined by ¹H and ¹¹B NMR titrations in DMSO or MeCN. Compared to phenylboronic acid (PBA), 1 is a stronger Lewis acid and a poorer H-bond donor with only one B-OH group, which is expected therefore to recognize anions mostly through the coordinate bonding. This is the case however only with F^-, HPO₄^2-, and PhPO₃^2- anions, which are coordinately bonded to 1, and partially with SO₄^2-, which forms only the H-bonded complex with PBA, but both H-bonded and coordinate complexes with 1. The majority of tested anions (AcO^-, PhPO₃H^-, (PhO)₂PO₂^-, Cl^-, and Br^-) form H-bonded complexes with both 1 and PBA, whereas H₂PO₄^- changes the binding mode from coordinate for PBA to H-bonded for 1. The preferable binding type for each anion is confirmed by calculations of DFT-optimized structures of the anion complexes of 1. The preferable binding type can be rationalized considering the effects of the steric hindrance, more significant for the coordinate bonding, and of increased anion basicity, which is favorable for both binding types, but enhances the strength of coordinate bonding more significantly than the strength of H-bonding.

Electrostatic vs. inductive effects in phosphine ligand donor properties and reactivity

Enhanced rates and selectivity in enzymes are enabled in part by precisely tuned electric fields within active sites. Analogously, the use of charged groups to leverage electrostatics in molecular systems is a promising strategy to tune reactivity. However, separation of the through space and through bond effects of charged functional groups is a long standing challenge that limits the rational application of electric fields in molecular systems. To address this challenge we developed a method using the phosphorus selenium coupling value (J _P-Se) of anionic phosphine selenides to quantify the electrostatic contribution of the borate moiety to donor strength. In this analysis we report the synthesis of a novel anionic phosphine, PPh₂CH₂BF₃K, the corresponding tetraphenyl phosphonium and tetraethyl ammonium selenides [PPh₄][SePPh₂CH₂BF₃] and [TEA][SePPh₂CH₂BF₃], and the Rh carbonyl complex [PPh₄][Rh(acac)(CO)(PPh₂(CH₂BF₃))]. Solvent-dependent changes in J _P-Se were fit using Coulomb's law and support up to an 80% electrostatic contribution to the increase in donor strength of [PPh₄][SePPh₂CH₂BF₃] relative to SePPh₂Et, while controls with [TEA][SePPh₂CH₂BF₃] exclude convoluting ion pairing effects. Calculations using explicit solvation or point charges effectively replicate the experimental data. This J _P-Se method was extended to [PPh₄][SePPh₂(2-BF₃Ph)] and likewise estimates up to a 70% electrostatic contribution to the increase in donor strength relative to SePPh₃. The use of PPh₂CH₂BF₃K also accelerates C-F oxidative addition reactivity with Ni(COD)₂ by an order of magnitude in comparison to the comparatively donating neutral phosphines PEt₃ and PCy₃. This enhanced reactivity prompted the investigation of catalytic fluoroarene C-F borylation, with improved yields observed for less fluorinated arenes. These results demonstrate that covalently bound charged functionalities can exert a significant electrostatic influence under common solution phase reaction conditions and experimentally validate theoretical predictions regarding electrostatic effects in reactivity.

Size- and shape-adaptable mixed-alkoxide-aggregates: encapsulation of tetrafluoroborate and butadiynediide

Treatment of silyl compounds with excess sodium tert-butoxide results in encapsulation of the released anion. While the BF4− anion just fits in a spherical sodium alkoxide hull, the butadiyenediide dianion pierces its hull resulting in dimerisation.

Copper(I) and silver(I) chemistry of vinyltrifluoroborate supported by a bis(pyrazolyl)methane ligand

Although unsaturated organotrifluoroborates are common synthons in metal-organic chemistry, their transition metal complexes have received little attention. [CH2(3,5-(CH3)2Pz)2]Cu(CH2[double bond, length as m-dash]CHBF3), (SIPr)Cu(MeCN)(CH2[double bond, length as m-dash]CHBF3) and [CH2(3,5-(CH3)2Pz)2]Ag(CH2[double bond, length as m-dash]CHBF3) represent rare, isolable molecules featuring a vinyltrifluoroborate ligand on coinage metals. The X-ray crystal structures show the presence of three-coordinate metal sites in these complexes. The vinyltrifluoroborate group binds asymmetrically to the metal site in [CH2(3,5-(CH3)2Pz)2]M(CH2[double bond, length as m-dash]CHBF3) (M = Cu, Ag) with relatively closer M-C(H)2 distances. The computed structures of [CH2(3,5-(CH3)2Pz)2]M(CH2[double bond, length as m-dash]CHBF3) and M(CH2[double bond, length as m-dash]CHBF3), however, have shorter M-C(H)BF3 distances than M-C(H)2. These molecules feature various inter- or intra-molecular contacts involving fluorine of the BF3 group, possibly affecting these M-C distances. The binding energies of [CH2[double bond, length as m-dash]CHBF3]- to Cu+, Ag+ and Au+ have been calculated at the wB97XD/def2-TZVP level of theory, in the presence and absence of the supporting ligand CH2(3,5-(CH3)2Pz)2. The calculation shows that Au+ has the strongest binding to the [CH2[double bond, length as m-dash]CHBF3]- ligand, followed by Cu+ and Ag+, irrespective of the presence of the supporting ligand. However, in all three metals, the supporting ligand weakens the binding of olefin to the metal. The same trends were also found from the analysis of the σ-donation and π-backbonding interactions between the metal fragment and the π and π* orbitals of [CH2[double bond, length as m-dash]CHBF3]-.

Efficient method for propargylation of aldehydes promoted by allenylboron compounds under microwave irradiation

The propargylation of aldehydes promoted by microwave irradiation using allenylboron compounds in a chemo- and regioselective way is described. The corresponding products were obtained in short reaction time, high yield and purity without the need of any solvent when allenylboronic acid pinacol ester was used, or using a minimal amount of acetone when potassium allenyltrifluoroborate was used.

Cationic and Betaine-Type Boronated Acridinium Dyes: Synthesis, Characterization, and Photocatalytic Activity

A series of isomeric boronated acridinium dyes were obtained by reactions of 10-(4'-octyloxyphenyl) functionalized 9(10H)-acridanone derivative with lithiated phenylboronic azaesters followed by aromatization with perchloric acid. The effect of the position of boronic group attached at ortho, meta, and para positions of the 9-phenyl ring on the photophysical properties was investigated. Conversion to related betaine trifluoroborato-substituted compounds was successfully performed, and the effect of this structural change on UV-vis absorption and fluorescence spectroscopy characteristics was established. Furthermore, cyclic voltammetry studies revealed that electrochemical behavior of cationic versus betaine structures is different in terms of redox potential values as well as stability. The theoretical calculations revealed a different scheme for molecular excitation processes in B(OH)₂ versus BF₃ ^--substituted compounds as charge transfer to acridinium core is observed from N-aryl or B-aryl moiety, respectively. Obtained compounds were active as photocatalysts in selected visible-light-promoted addition reactions to unsaturated substrates.

Ketyl radical reactivity via atom transfer catalysis

Single-electron reduction of a carbonyl to a ketyl enables access to a polarity-reversed platform of reactivity for this cornerstone functional group. However, the synthetic utility of the ketyl radical is hindered by the strong reductants necessary for its generation, which also limit its reactivity to net reductive mechanisms. We report a strategy for net redox-neutral generation and reaction of ketyl radicals. The in situ conversion of aldehydes to α-acetoxy iodides lowers their reduction potential by more than 1 volt, allowing for milder access to the corresponding ketyl radicals and an oxidative termination event. Upon subjecting these iodides to a dimanganese decacarbonyl precatalyst and visible light irradiation, an atom transfer radical addition (ATRA) mechanism affords a broad scope of vinyl iodide products with high Z-selectivity.

Pushing the frontiers: boron-11 NMR as a method for quantitative boron analysis and its application to determine boric acid in commercial biocides

Quantitative boron-11 NMR (11B qNMR) spectroscopy has been introduced for the first time as a method to determine boric acid content in commercial biocides. Validation of the method affords a limit of detection of 0.02% w/w and a limit of quantification of 0.04% w/w, which are low enough to determine boric acid in commercial biocides. Other figures of merit such as linearity (R2 > 0.99), recovery (93.6%-106.2%), intra- and inter-day precision (from 0.7 to 2.0%), uncertainty (3.7 to 4.4%) and matrix effects were also evaluated. This method was successfully applied to determine boric acid in five different commercial biocides in a wide range of concentrations (<0.05 to 10% w/w) providing excellent results when they were compared with those obtained using inductively coupled plasma-mass spectrometry (ICP-MS). The suitability of this method for a fast and reliable quantification of boric acid in commercial biocide preparations has been demonstrated. The absence of the matrix effect allows the application of this validated method for the determination of boric acid in other matrices of diverse composition.

A Green Approach for Allylations of Aldehydes and Ketones: Combining Allylborate, Mechanochemistry and Lanthanide Catalyst

Secondary and tertiary alcohols synthesized via allylation of aldehydes and ketones are important compounds in bioactive natural products and industry, including pharmaceuticals. Development of a mechanochemical method using potassium allyltrifluoroborate salt and water, to successfully perform the allylation of aromatic and aliphatic carbonyl compounds is reported for the first time. By controlling the grinding parameters, the methodology can be selective, namely, very efficient for aldehydes and ineffective for ketones, but by employing lanthanide catalysts, the reactions with ketones can become practically quantitative. The catalyzed reactions can also be performed under mild aqueous stirring conditions. Considering the allylation agent and its by-products, aqueous media, energy efficiency and use of catalyst, the methodology meets most of the green chemistry principles.

Reaction of a 2,4,6-triphenylphosphinine ferrate anion with electrophiles: a new route to phosphacyclohexadienyl complexes

Electrophilic attack at π-coordinated 2,4,6-triphenylphosphinine afforded a range of novel complexes with substituted η⁵-phosphacyclohexadienyl ligands.

Nickel-catalyzed borylation of halides and pseudohalides with tetrahydroxydiboron [B2(OH)4]

Arylboronic acids are gaining increased importance as reagents and target structures in a variety of useful applications. Recently, the palladium-catalyzed synthesis of arylboronic acids employing the atom-economical tetrahydroxydiboron (BBA) reagent has been reported. The high cost associated with palladium, combined with several limitations of both palladium- and copper-catalyzed processes, prompted us to develop an alternative method. Thus, the nickel-catalyzed borylation of aryl and heteroaryl halides and pseudohalides using tetrahydroxydiboron (BBA) has been formulated. The reaction proved to be widely functional group tolerant and applicable to a number of heterocyclic systems. To the best of our knowledge, the examples presented here represent the only effective Ni-catalyzed Miyaura borylations conducted at room temperature.

Allylation of functionalized aldehydes by potassium allyltrifluoroborate catalyzed by 18-crown-6 in aqueous media

An efficient method for the allylation of aldehydes containing a broad range of functional groups using potassium allyltrifluoroborate is described. The reaction utilizes a catalytic amount of 18-C-6 in biphasic media under open atmosphere and room temperature to provide the corresponding homoallylic alcohols in high yields and without the necessity of any subsequent purification.