Free-breathing 3D cardiac T1 mapping with transmit B1 correction at 3T

Free-breathing 3D cardiac extracellular volume (ECV) mapping using a linear tangent space alignment (LTSA) model

PURPOSE

To develop a new method for free-breathing 3D extracellular volume (ECV) mapping of the whole heart at 3 T.

METHODS

A free-breathing 3D cardiac ECV mapping method was developed at 3 T. T1 mapping was performed before and after contrast agent injection using a free-breathing electrocardiogram-gated inversion recovery sequence with spoiled gradient echo readout. A linear tangent space alignment model-based method was used to reconstruct high-frame-rate dynamic images from (k,t)-space data sparsely sampled along a random stack-of-stars trajectory. Joint T1 and transmit B1 estimation were performed voxel-by-voxel for pre- and post-contrast T1 mapping. To account for the time-varying T1 after contrast agent injection, a linearly time-varying T1 model was introduced for post-contrast T1 mapping. ECV maps were generated by aligning pre- and post-contrast T1 maps through affine transformation.

RESULTS

The feasibility of the proposed method was demonstrated using in vivo studies with six healthy volunteers at 3 T. We obtained 3D ECV maps at a spatial resolution of 1.9 × 1.9 × 4.5 mm3 and a FOV of 308 × 308 × 144 mm3, with a scan time of 10.1 ± 1.4 and 10.6 ± 1.6 min before and after contrast agent injection, respectively. The ECV maps and the pre- and post-contrast T1 maps obtained by the proposed method were in good agreement with the 2D MOLLI method both qualitatively and quantitatively.

CONCLUSION

The proposed method allows for free-breathing 3D ECV mapping of the whole heart within a practically feasible imaging time. The estimated ECV values from the proposed method were comparable to those from the existing method.

3D B1+ corrected simultaneous myocardial T1 and T1ρ mapping with subject-specific respiratory motion correction and water-fat separation

PURPOSE

To develop a 3D free-breathing cardiac multi-parametric mapping framework that is robust to confounders of respiratory motion, fat, and B1+ inhomogeneities and validate it for joint myocardial T1 and T1ρ mapping at 3T.

METHODS

An electrocardiogram-triggered sequence with dual-echo Dixon readout was developed, where nine cardiac cycles were repeatedly acquired with inversion recovery and T1ρ preparation pulses for T1 and T1ρ sensitization. A subject-specific respiratory motion model relating the 1D diaphragmatic navigator to the respiration-induced 3D translational motion of the heart was constructed followed by respiratory motion binning and intra-bin 3D translational and inter-bin non-rigid motion correction. Spin history B1+ inhomogeneities were corrected with optimized dual flip angle strategy. After water-fat separation, the water images were matched to the simulated dictionary for T1 and T1ρ quantification. Phantoms and 10 heathy subjects were imaged to validate the proposed technique.

RESULTS

The proposed technique achieved strong correlation (T1: R2 = 0.99; T1ρ: R2 = 0.98) with the reference measurements in phantoms. 3D cardiac T1 and T1ρ maps with spatial resolution of 2 × 2 × 4 mm were obtained with scan time of 5.4 ± 0.5 min, demonstrating comparable T1 (1236 ± 59 ms) and T1ρ (50.2 ± 2.4 ms) measurements to 2D separate breath-hold mapping techniques. The estimated B1+ maps showed spatial variations across the left ventricle with the septal and inferior regions being 10%-25% lower than the anterior and septal regions.

CONCLUSION

The proposed technique achieved efficient 3D joint myocardial T1 and T1ρ mapping at 3T with respiratory motion correction, spin history B1+ correction and water-fat separation.

Cardiovascular magnetic resonance parametric mapping in the risk stratification of patients affected by chronic myocarditis

OBJECTIVES

Chronic myocardial inflammation is the substrate for arrhythmias and dilated cardiomyopathy onset, causing morbidity and mortality. Cardiovascular magnetic resonance (CMR) is the noninvasive gold standard for myocardial inflammation detection, due to the high sensitivity of the parametric mapping techniques. However, the potential prognostic capabilities of CMR mapping have not been studied in the setting of chronic myocarditis.

METHODS

This is a retrospective study on consecutive patients undergoing CMR with suspicion of chronic myocarditis from September 2017 to November 2021. CMR was acquired according to 2018 Lake Louise Criteria recommendations. The outcome (chronic heart failure, recurrent chronic myocarditic chest pain, ICD/PM implantation, arrhythmias [Lown class ≥ 2]) was collected at follow-up. The extent and degree of native T1, T2, and extracellular volume fraction alterations were used to create multivariate binary logistic regression models for outcome prediction, with or without left ventricle ejection fraction; their AUCs were compared with DeLong test. Differences between other parameters were assessed using Chi-square test, Fisher's exact test, or Mann-Whitney U-test.

RESULTS

The population included 88 patients (age 43 [32-52] yo), mostly male (53/88, 60%). After a median follow-up of 21 (17-34) months, 31/88 (35%) patients experienced the outcome. The model based on the extension of mapping alterations and LV dysfunction reached a good predictability (AUC 0.71). The model based on the intensity of mapping alterations and LV dysfunction had a very good performance (AUC 0.80).

CONCLUSION

The quantitative analysis of CMR mapping parameters indicative of myocardial damage severity may improve risk stratification in patients with chronic myocarditis.

CLINICAL RELEVANCE STATEMENT

The intensity of myocardial damage, assessed as the degree of native T1, T2, and ECV alteration, together with left ventricle dysfunction, improved patient risk stratification. Further prospective studies will be necessary for validation before clinical application.

KEY POINTS

Risk stratification of patients affected by chronic myocarditis is an unmet clinical need. Cardiovascular MRI (CMR) can role in risk stratification thanks to its multiparametric capabilities of tissue characterization. A model based on CMR parametric mapping and left ventricle ejection fraction can predict arrhythmia, heart failure, and recurrent symptoms.

Motion-compensated T1 mapping in cardiovascular magnetic resonance imaging: a technical review

T 1 mapping is becoming a staple magnetic resonance imaging method for diagnosing myocardial diseases such as ischemic cardiomyopathy, hypertrophic cardiomyopathy, myocarditis, and more. Clinically, most T 1 mapping sequences acquire a single slice at a single cardiac phase across a 10 to 15-heartbeat breath-hold, with one to three slices acquired in total. This leaves opportunities for improving patient comfort and information density by acquiring data across multiple cardiac phases in free-running acquisitions and across multiple respiratory phases in free-breathing acquisitions. Scanning in the presence of cardiac and respiratory motion requires more complex motion characterization and compensation. Most clinical mapping sequences use 2D single-slice acquisitions; however newer techniques allow for motion-compensated reconstructions in three dimensions and beyond. To further address confounding factors and improve measurement accuracy, T 1 maps can be acquired jointly with other quantitative parameters such as T 2 , T 2 ∗ , fat fraction, and more. These multiparametric acquisitions allow for constrained reconstruction approaches that isolate contributions to T 1 from other motion and relaxation mechanisms. In this review, we examine the state of the literature in motion-corrected and motion-resolved T 1 mapping, with potential future directions for further technical development and clinical translation.

3D model-based super-resolution motion-corrected cardiac T1 mapping

Objective. To provide 3D high-resolution cardiac T1 maps using model-based super-resolution reconstruction (SRR).Approach. Due to signal-to-noise ratio limitations and the motion of the heart during imaging, often 2D T1 maps with only low through-plane resolution (i.e. slice thickness of 6-8 mm) can be obtained. Here, a model-based SRR approach is presented, which combines multiple stacks of 2D acquisitions with 6-8 mm slice thickness and generates 3D high-resolution T1 maps with a slice thickness of 1.5-2 mm. Every stack was acquired in a different breath hold (BH) and any misalignment between BH was corrected retrospectively. The novelty of the proposed approach is the BH correction and the application of model-based SRR on cardiac T1 Mapping. The proposed approach was evaluated in numerical simulations and phantom experiments and demonstrated in four healthy subjects.Main results. Alignment of BH states was essential for SRR even in healthy volunteers. In simulations, respiratory motion could be estimated with an RMS error of 0.18 ± 0.28 mm. SRR improved the visualization of small structures. High accuracy and precision (average standard deviation of 69.62 ms) of the T1 values was ensured by SRR while the detectability of small structures increased by 40%.Significance. The proposed SRR approach provided T1 maps with high in-plane and high through-plane resolution (1.3 × 1.3 × 1.5-2 mm³). The approach led to improvements in the visualization of small structures and precise T1 values.

Simultaneous multi-parametric acquisition and reconstruction techniques in cardiac magnetic resonance imaging: Basic concepts and status of clinical development

Simultaneous multi-parametric acquisition and reconstruction techniques (SMART) are gaining attention for their potential to overcome some of cardiovascular magnetic resonance imaging's (CMR) clinical limitations. The major advantages of SMART lie within their ability to simultaneously capture multiple "features" such as cardiac motion, respiratory motion, T1/T2 relaxation. This review aims to summarize the overarching theory of SMART, describing key concepts that many of these techniques share to produce co-registered, high quality CMR images in less time and with less requirements for specialized personnel. Further, this review provides an overview of the recent developments in the field of SMART by describing how they work, the parameters they can acquire, their status of clinical testing and validation, and by providing examples for how their use can improve the current state of clinical CMR workflows. Many of the SMART are in early phases of development and testing, thus larger scale, controlled trials are needed to evaluate their use in clinical setting and with different cardiac pathologies.