Rose petal effect: A subtle combination of nano‐scale roughness and chemical variability

Wetting transitions in adhesive surfaces of polystyrene: The petal effect

HYPOTHESIS

The petal effect is a well-known natural phenomenon in surface science and has served as inspiration for the creation of several materials with superhydrophobic qualities and high adhesion. As surface roughness has a crucial role in these properties, being able to modulate it could help us design materials at will. Capillary penetration frustrates diffusion and promotes large contact angles as well as high adhesion.

EXPERIMENTS

Polystyrene surfaces were created using the spin-coating technique. By varying the polymer concentration, the surface roughness was modified. To determine the roughness parameters, atomic force microscopy was used. We recorded advancing and receding contact angles using water and glycerol as test liquids to study contact angle hysteresis, the work of adhesion and the apparent surface energy, which was determined with the Chibowski and Perea-Carpio method. For the purpose of elucidating the wetting states, captive bubble experiments were conducted.

FINDINGS

Using an easy method, we create polystyrene surfaces with both superhydrophobicity and strong adhesion, where the roughness area factor regulates wetting transitions from Cassie-Baxter to Wenzel. The receding contact angle suggests capillary penetration, which we demonstrate by captive bubble experiments. In addition, a link was found between the surface roughness and apparent surface energy.

Turning Non-Sticking Surface into Sticky Surface: Correlation between Surface Topography and Contact Angle Hysteresis

We present a surface modification technique that turns CuNi foam films with a high contact angle and non-sticking property into a sticky surface. By decorating with mesh-like biaxially oriented polypropylene (BOPP) and adjusting the surface parameters, the surface exhibits water-retaining capability even when being held upside down. The wetting transition process of droplets falling on its surface were systematically studied using the finite element simulation method. It is found that the liquid filled the surface microstructure and curvy three-phase contact line. Moreover, we experimentally demonstrated that this surface can be further applied to capture underwater air bubbles.

Understanding the petal effect: Wetting properties and surface structure of natural rose petals and rose petal-derived surfaces

The petal effect is identified as a non-wetting state with high drop adhesion. The wetting behavior of petal surfaces is attributed to the papillose structure of their epidermis, which leads to a Cassie-Baxter regime combined with strong pinning sites. Under this scenario, sessile drops are pearl shaped and, unlike lotus-like surfaces, firmly attached to the surface. Petal surfaces are used as inspiration for the fabrication of functional parahydrophobic surfaces such as antibacterial or water-harvesting surfaces. In this work, two types of rose petals were replicated by using a templating technique based in Polydimethylsiloxane (PDMS) nanocasting. The topographic structure, the condensation mechanism under saturated environments and the wetting properties of the natural rose petal and their negative and positive replicas were analyzed. Finally, we performed prospective ice adhesion studies to elucidate whether petal-like surfaces may be used as deicing solutions.

Chemical and structural heterogeneity of olive leaves and their trichomes

Many biological surfaces have hairs, known as trichomes in plants. Here, the wettability and macro- and micro-scale features of olive leaves are analyzed. The upper leaf side has few trichomes, while the lower side has a high trichome density. By combining different techniques including electron and atomic force microscopy, trichome surfaces are found to be chemically (hydrophilic-hydrophobic) heterogeneous at the nano-scale. Both olive leaf surfaces are wettable by water, having a high water contact angle hysteresis and great drop adhesion. The ultra-structural pattern observed for epidermal pavement cells differs from the reticulate cuticle structure of trichomes which shows that leaf surface areas may be substantially different despite being located nearby. Our study provides evidence for the nano-scale chemical heterogeneity of a trichome which may influence the functional properties of biological surfaces, such as water and solute permeability or water capture as discussed here for plants.

Leaf wettability is the main driver for foliar P uptake in P-deficient maize

Foliar fertilisation is an alternative form of nutrient application, which is of particular interest for phosphorus (P), where the efficiency of soil fertilisation is low. However, the uptake of foliar-applied nutrients is insufficiently characterised. The aim of this study was to investigate the individual and combined significance of wettability, foliar fertiliser properties and surfactant on foliar P uptake in P-deficient maize (Zea mays L.). Sorption and desorption properties of two P salts used as foliar fertilisers (KH2PO4, K2HPO4) were determined with dynamic vapor sorption isotherms. Leaf surfaces and foliar spray depositions of two differently wettable maize cultivars were investigated by scanning electron microscopy and contact angle measurement. Phosphorus uptake was then linked to leaf and fertiliser solution properties and its effect on cell ultrastructure was characterised by transmission electron microscopy. Wettability was the key factor for P absorption, as all foliar fertilisers were taken up reaching a tissue-P level of adequately nourished plants. For unwettable leaves, only solutions with surfactant, especially the combination of surfactant and hygroscopic P salt (K2HPO4) were taken up. This study provides novel insights into the significance of leaf surface and fertiliser properties, which can thus contribute to an improvement of P fertilisation strategies.

Leaf surface features of maize cultivars and response to foliar phosphorus application: effect of leaf stage and plant phosphorus status

Soil phosphorus (P) application is the most common fertilisation technique but may involve constraints due to chemical fixation and microbial immobilisation. Furthermore, excessive P fertilisation leads to P runoff into water bodies, threatening ecosystems, so targeted foliar P fertilisation is an interesting alternative. This study aimed to determine the importance of leaf surface characteristics for foliar P uptake in P-deficient maize (Zea mays L.). The leaf surface of four maize cultivars was characterised by electron microscopy, Fourier transform infrared spectroscopy and contact angle measurements. Uptake of foliar-applied P by maize cultivars was estimated, measuring also leaf photosynthetic rates after foliar P spraying. Plants of cultivar P7948 were found to be wettable from the 4th leaf in acropetal direction, whereas other cultivars were unwettable until the 6th leaf had developed. Minor variations in stomatal number and cuticle composition were recorded, but no differences in foliar P absorption were observed between cultivars. Nevertheless, cultivars showed variation in the improvement of photosynthetic capacity following foliar P application. Phosphorus deficiency resulted in ultrastructural disorganisation of mesophyll cells and chloroplasts, which impaired photosynthetic performance, yet there was no effect on stomatal frequency and leaf wettability. This study provides new insights into the influence of P deficiency and cultivar on leaf surface characteristics, foliar P uptake and its effect on physiological processes. Understanding the relationships between leaf characteristics and P uptake allows a more targeted evaluation of foliar P fertilisation as an application technique and contributes to the understanding of foliar uptake mechanisms.

Biomimetic surfaces: Insights on the role of surface topography and wetting properties in bacterial attachment and biofilm formation

The study explores the impact of biomimetic surfaces on bacterial attachment and biofilm formation. Specifically, it investigates the effects of topographic scale and wetting behavior on the attachment and growth of Staphylococcus aureus and Escherichia coli on four different biomimetic surfaces: rose petals, Paragrass leaves, shark skin, and goose feathers. Using soft lithography, epoxy replicas with surface topographies similar to those of the natural surfaces were created. The static water contact angles of the replicas exceeded the hydrophobic threshold of 90°, while the hysteresis angles were found to be in the order of goose feathers, shark skin, Paragrass leaves, and rose petals. The results showed that bacterial attachment and biofilm formation were the lowest on rose petals and the highest on goose feathers, regardless of the bacterial strain. Additionally, the study revealed that surface topography had a significant impact on biofilm formation, with smaller feature sizes inhibiting biofilm formation. Hysteresis angle, rather than static water contact angle, was identified as a critical factor to consider when evaluating bacterial attachment behavior. These unique insights have the potential to lead to the development of more effective biomimetic surfaces for the prevention and eradication of biofilms, ultimately improving human health and safety.

Evaluating Leaf Wettability and Salt Hygroscopicity as Drivers for Foliar Absorption

The objective of this study was to evaluate the rate of foliar absorption of magnesium (Mg) salts with different deliquescence and efflorescence relative humidity values (DRH and ERH, also known as point of deliquescence (POD) and point of efflorescence (POE), respectively) when supplied to leaves of model plants with different wettability properties. For this purpose, a greenhouse pot experiment was conducted with lettuce (very wettable), broccoli (highly unwettable) and leek (highly unwettable). Foliar sprays contained 0.1% surfactant plus 100 mM Mg supplied as MgCl₂·6H₂O, Mg(NO₃)₂·6H₂O or MgSO₄·7H₂O. Leaf Mg concentrations were determined 1 and 7 days after foliar application. Anion concentrations were also measured in lettuce where a significant foliar Mg absorption was detected. Leaf wettability, leaf surface free energy and fertilizer drop deposit appearance onto the foliage were assessed. It is concluded that despite including a surfactant in the spray formulation, leaf wettability plays a major role in foliar Mg absorption.

Droplet Impact Dynamics on Biomimetic Replica of Yellow Rose Petals: Rebound to Micropinning Transition

Rose petals exhibit a phenomenal wetting property of being sticky and superhydrophobic simultaneously. A recent study has shown that for short timescales, associated with drop impact phenomenon, lotus leaf and rose petal replicas exhibit similar wettability, thereby highlighting the difference between long and short time wettability. Also, short time wetting on rose petals of different colors remains completely unaddressed, as almost all existing study on wetting of rose petals have been performed with the classical red rose (Rosa chinensis). In this paper, we compare the drop impact studies on replicas of a yellow rose petal, with those on extensively studied red rose petal replicas and the lotus leaf over a wide range of Weber number (We), by varying the height of fall (h) from 10 to 375 mm. Our results reveal that over the replica of a yellow rose petal, the initial impact outcome varies from complete rebound to micro pinning and eventually complete pinning depending on the kinetic energy of the impacting drop, in contrast to that on red rose petal replica on which the droplet always pinned. Based on experimental finding, we present a comprehensive regime phase map of the post impact behavior of the drop on different surfaces as a function of impact height. We also present a simple scaling analysis to understand the combined effect of pattern height and periodicity on the critical h corresponding to wetting regime transition. Additionally, variation of maximum spreading diameter and spreading time with the h for the different surfaces is also discussed. The results highlight that the initial impact dynamics of a water drop over a topographically patterned substrate is a strong function of the topographical parameters and can be very different from the equilibrium wetting state.

Characterization of leaf trichomes and their influence on surface wettability of Salsola ferganica, an annual halophyte in the desert

Many organisms use functional surfaces to collect water from the atmosphere. Salsola ferganica Drob. is one of the most abundant plants in desert regions and thrives in extreme environments with multiple but limited water resources, including dew and fog; however, its mechanisms of water harvesting remain unclear. We investigated trichome structural characteristics and their influence on the surface wettability of S. ferganica leaves using a variety of approaches (scanning electron microscopy, optical microscopy, immunolabelling staining, X-ray diffractometry, and infrared spectroscopy). Microstructural observations revealed that the trichomes of S. ferganica presented a curved upper part, the 'spindle node'-like structure in the middle, and the micro-grooves structure in between; such unique structures may aid in capturing moisture from the air. The physicochemical characteristics of the trichome surface, including hydrophobic functional groups, hydrophilic pectins, and low crystallinity, may enhance the adhesion of water drops to trichomes. Furthermore, we discovered that the piliferous S. ferganica leaves were more effective in retaining water than the glabrous S. aralocaspica leaves, and the dense trichome layer exhibited a significantly unwettable surface (high contact angle with droplets), whereas the individual trichomes retained water effectively (more so under drought conditions). The combination of these two properties is consistent with the 'rose petal effect', which describes rough surfaces that are hydrophobic but exhibit high adhesion with water. These factors suggest that the evolutionary optimisation of water acquisition by coupling relevant microstructures with the physicochemical properties of trichomes enables S. ferganica to survive harsh conditions in the seedling stage.

What is missing to advance foliar fertilization using nanotechnology?

An urgent challenge within agriculture is to improve fertilizer efficiency in order to reduce the environmental footprint associated with an increased production of crops on existing farmland. Standard soil fertilization strategies are often not very efficient due to immobilization in the soil and losses of nutrients by leaching or volatilization. Foliar fertilization offers an attractive supplementary strategy as it bypasses the adverse soil processes, but implementation is often hampered by a poor penetration through leaf barriers, leaf damage, and a limited ability of nutrients to translocate. Recent advances within bionanotechnology offer a range of emerging possibilities to overcome these challenges. Here we review how nanoparticles can be tailored with smart properties to interact with plant tissue for a more efficient delivery of nutrients.

Leaf wettability, anatomy and ultra-structure of Nothofagus antarctica and N. betuloides grown under a CO2 enriched atmosphere

Increasing CO₂ air concentration may affect wettability, anatomy and ultra-structure of leaves of Patagonian forest species, evergreen and deciduous plants potentially responding differently to such CO₂ increases. In this study, we analysed the wettability, anatomy and ultra-structure of leaves of Nothofagus antarctica (deciduous) and N. betuloides (evergreen) grown under high CO₂ concentrations. Leaf wettability was affected by increasing CO₂, in different directions depending on species and leaf side. In both species, soluble cuticular lipid concentrations per unit leaf area raised with higher CO₂ levels. Stomatal parameters (density, size of guard cells and pores) showed different responses to CO₂ increasing depending on the species examined. In both species, leaf tissues showed a general trend to diminish with higher CO₂ concentration. Cuticle thickness was modified with higher CO₂ concentration in N. betuloides, but not in N. antarctica leaves. In both species, chloroplasts were often damaged with the increase in CO₂ concentration. Our results show that several surface and internal leaf parameters can be modified in association with an increase in atmospheric CO₂ concentration which may very among plant species.

Cuticle structure and chemical composition of waxes in Phaeoceros laevis (L.) Prosk (Notothyladaceae, Anthocerotophyta)

The development of a hydrophobic cuticle covering the epidermis was a crucial evolutionary novelty ensuring the establishment of land plants. However, there is little information about its structure and chemical composition, as well as its functional implications in avascular lineages such as Anthocerotophyta. The main goal of the present study was to compare the gametophyte and sporophyte cuticles of Phaeoceros laevis. Semithin sections were analyzed through light microscopy (LM), cuticle structure was evaluated by transmission electron microscopy (TEM) and epicuticular wax morphology was analyzed by scanning electron microscopy (SEM). Total waxes were analyzed by CG/MS, and the components were identified based on the mass spectra. A thin lipophilic layer was detected on the sporophyte surface, structured as a stratified cuticular layer, similar to the well-known structure described for vascular plants. On the other hand, the gametophyte cuticle was observed only with TEM as a thin osmiophilic layer. SEM analyses showed a film-type wax on the surface of both life phases. The wax layer was eight-fold thicker on the sporophyte (0.8 µg cm^-2) than on gametophyte (0.1 µg cm^-2). Possible mechanical and/or drought protection are discussed. Fatty acids, primary alcohols, and steroids were identified in both life phases, while the kauren-16-ene diterpene (3%) was detected only on the sporophyte. Although no alkanes were detected in P. laevis, our findings unveil great similarity of the sporophyte cuticle of this hornwort species with the general data described for vascular plants, reinforcing the conservative condition of this character and supporting the previous idea that the biosynthetic machinery involved in the synthesis of wax compounds is conserved since the ancestor of land plants.