Structural investigation of the antibiotic sporaviridin: 11—Molecular secondary ion mass spectral studies on the constituent pentasaccharides viridopentaoses

Electrospray ionization mass spectrometric analysis of microcystins, cyclic heptapeptide hepatotoxins: modulation of charge states and [M + H]+ to [M + Na]+ ratio

Electrospray ionization mass spectrometry was used to develop a rapid, sensitive, and accurate method for determination and identification of hepatotoxic microcystins, cyanobacterial cyclic heptapeptides. To optimize the electrospray ionization conditions, factors affecting charge state distribution, such as amino acid components of sample, proton affinity of the additives, and additive concentration, were investigated in detail and a method for controlling charge states was developed to provide molecular-related ions for assignment of molecular weight and reasonably abundant precursor ions for MS/MS analysis. A procedure for identification of microcystins consisting of known amino acids was proposed: for microcystins giving abundant [M + 2H]2+ ions, the addition of nitrogen-containing bases to the aqueous sample solution is effective to obtain an increased intensity of [M + H]+ ions, whereas the addition of Lewis acids containing nitrogen can produce increased abundances of [M + 2H]2+ ions for microcystins giving weak [M + 2H]2+ ions. Microcystins possessing no arginine residue always give sodium adduct ions [M + Na]+ as the base peak, and these are difficult to fragment via low energy collision-induced dissociation to yield structurally informative products; the addition of oxalic acid increases [M + H]+ ion abundances, and these fragment readily.

Use of nonvolatile buffers in liquid chromatography/mass spectrometry: advantages of capillary-scale particle beam interfacing

The use of nonvolatile buffers like phosphate and citrate is usually incompatible with mass spectrometric detection or may heavily interfere with ion generation. In the case of conventional HPLC flow rates, the continuous buffer deposition produces fouling of the mass spectrometer ion source and may worsen the performance of any LC/MS interface as well. Our research group demonstrated that reducing the mobile phase flow rate in a particle beam interface improves the nebulization and enhances the overall performance. We have also assumed that such a modification may better handle potentially instrument harmful solvents or nonvolatile HPLC buffers. Since the presence of salts does not interfere with the electron ionization process, the particle beam interface can be considered, in principle, particularly suitable for those chromatographic separations that benefit from nonvolatile buffers. The microscale flow rate interface, developed in our laboratory, generates an aerosol from 1 microL/min of mobile phase flow rate. Under these conditions, the absolute amount of a nonvolatile buffer actually introduced into the system is approximately 1/1000 of that carried by a conventional HPLC column, slowing its deposition. This assumption was verified with a real-world application requiring the use of a phosphate buffer at a maximum concentration of 10 mM. It involved the determination of dexamethasone, an anti-inflammatory drug, in human blood after its administration to a patient. Several crucial mass spectral and chromatographic parameters were monitored during a 35-day period of intense use. Neither appreciable signal modification nor evident buffer deposition was observed during the test period, with only a normal and limited run-by-run and day-by-day variation of the instrument response.

On-line buffer removal and fraction selection in gradient capillary high-performance liquid chromatography prior to electrospray mass spectrometry of peptides and proteins

The technique for on-line removal of buffers and for fraction selection to eliminate source clogging and suppression of electrospray ionization by unwanted constituents consisted of: (i) selecting the initial mobile phase composition to retain analytes on top of a capillary high-performance liquid chromatography (HPLC) column; (ii) washing the buffer isocratically to waste, using a two-way micro dump valve; (iii) starting the gradient and switching the dump valve to introduce analytes into the source. Peptide and protein mixtures were prepared in 0.05-0.5 M phosphate and 0.55 mM tris-based buffers, and water. After buffer removal, chromatograms and electrospray spectra were indistinguishable from those of aqueous controls, down to 1 pmol (acidic fibroblast growth factor) consumed, and up to 78 kDa (bovine transferrin) molecular weight. Aided by the dump valve, 100 fmol of angiotensin could be fractionated and identified on the slope of a 10 x 10(6) fmol of leucine enkephalin HPLC peak. On-line buffer removal and fraction selection eliminate the need for additional preparation steps than can lead to excessive sample losses.

A simple desalting procedure for fast atom bombardment mass spectrometry

A simple and efficient procedure for desalting samples prior to fast atom bombardment mass spectrometry utilizes low-pressure reverse-phase chromatography with disposable high-capacity mini-columns. Microscale (0.1-10 mumol) sample purification with high analyte recovery is possible for nucleosides, nucleotides and peptides. Salt removal has been evaluated both by conductivity and mass spectral methods and is greater than 99% for the model compounds cytidine, adenosine and AMP, even when they are contaminated with a 10 molar excess of NaCl. This procedure is also applicable to a range of small peptides as demonstrated with pyro-Glu-His-Gly and methionine enkephalin.