Thin Coatings of α- and β-Bi2O3 by Ultrasonic Spray Coating of a Molecular Bismuth Oxido Cluster and their Application for Photocatalytic Water Purification Under Visible Light

Review on synthetic approaches and PEC activity performance of bismuth binary and mixed-anion compounds for potential applications in marine engineering

Photoelectrochemical (PEC) technology in marine engineering holds significant importance due to its potential to address various challenges in the marine environment. Currently, PEC-type applications in marine engineering offer numerous benefits, including sustainable energy generation, water desalination and treatment, photodetection, and communication. Finding novel efficient photoresponse semiconductors is of great significance for the development of PEC-type techniques in the marine space. Bismuth-based semiconductor materials possess suitable and tunable bandgap structures, high carrier mobility, low toxicity, and strong oxidation capacity, which gives them great potential for PEC-type applications in marine engineering. In this paper, the structure and properties of bismuth binary and mixed-anion semiconductors have been reviewed. Meanwhile, the recent progress and synthetic approaches were discussed from the point of view of the application prospects. Finally, the issues and challenges of bismuth binary and mixed-anion semiconductors in PEC-type photodetection and hydrogen generation are analyzed. Thus, this perspective will not only stimulate the further investigation and application of bismuth binary and mixed-anion semiconductors in marine engineering but also help related practitioners understand the recent progress and potential applications of bismuth binary and mixed-anion compounds.

Development of spray pyrolysis-synthesised Bi2O3 thin films for photocatalytic applications

Photocatalysis is a green and cost-effective approach to environmental remediation. While TiO2 is considered one of the benchmark photocatalysts, alternative materials such as Bi2O3 have recently attracted increasing scientific attention as prospective visible light photocatalysts. This study aimed to develop a strategy for Bi2O3 thin film deposition via ultrasonic spray pyrolysis and systematically study process variables for the deposition of β-Bi2O3 thin films for photocatalytic applications. To achieve the aim, the precursor solution concentration as well as deposition and annealing temperature were optimised. The structural, optical, morphological, chemical and wettability properties of the obtained Bi2O3 thin films were investigated with respect to the effect on the photocatalytic oxidation of 10 ppm methyl orange (MO). The highest photocatalytic activity (48% in 5 h) under UV-A was recorded for the β-Bi2O3 film deposited using 0.1 M precursor solution at 300 °C and heat-treated for 1 h in air at 350 °C. Deposition at 300 °C resulted in an amorphous film structure, whereas annealing at 350 °C led to the formation of the β-Bi2O3 phase with the dominant facet orientation (220). These results show the suitability of spray pyrolysis for the deposition of Bi2O3 thin films with promising results for MO dye degradation, expanding the range of suitable photocatalytic materials.

Sonochemically assisted the synthesis and catalytic application of bismuth-based photocatalyst: A mini review

Recently, bismuth (Bi)-based photocatalysts have been a well-deserved hotspot in the field of photocatalysis owning to their photoelectrochemical properties driven by the distortion of the Bi 6 s orbital, while their narrow band gap and poor quantum efficiency still restrict their application. With the development of ultrasonic technology, it is expected to become a broom to clear the application obstacles of Bi-based photocatalysts. The special forces and environmental conditions brought by ultrasonic irradiation play beneficial roles in the preparation, modification and performance releasement of Bi-based photocatalysts. In this review, the role and influencing factors of ultrasound in the preparation and modification of Bi-based photocatalysts were introduced. Crucially, the mechanism of the improving the performance for various types of Bi-based photocatalysts by ultrasound in the whole process of photocatalysis was deeply analyzed. Then, the application of ultrasonic synergistic Bi-based photocatalysts in contaminants treatment and energy conversion was briefly introduced. Finally, based on an unambiguous understanding of ultrasonic technology in assisting Bi-based photocatalysts, the future directions and possibilities for ultrasonic synergistic Bi-based photocatalysts are explored.

Deposition of Nanosized Amino Acid Functionalized Bismuth Oxido Clusters on Gold Surfaces

Bismuth compounds are of growing interest with regard to potential applications in catalysis, medicine, and electronics, for which their environmentally benign nature is one of the key factors. One thing that currently hampers the further development of bismuth oxido-based materials, however, is the often low solubility of the precursors, which makes targeted immobilisation on substrates challenging. We present an approach towards the solubilisation of bismuth oxido clusters by introducing an amino carboxylate as a functional group. For this purpose, the bismuth oxido cluster [Bi38O45(NO3)20(dmso)28](NO3)4·4dmso (dmso = dimethyl sulfoxide) was reacted with the sodium salt of tert-butyloxycabonyl (Boc)-protected phenylalanine (L-Phe) to obtain the soluble and chiral nanocluster [Bi38O45(Boc–Phe–O)24(dmso)9]. The exchange of the nitrates by the amino carboxylates was proven by nuclear magnetic resonance, Fourier-transform infrared spectroscopy, as well as elemental analysis and X-ray photoemission spectroscopy. The solubility of the bismuth oxido cluster in a protic as well as an aprotic polar organic solvent and the growth mode of the clusters upon spin, dip, and drop coating on gold surfaces were studied by a variety of microscopy, as well as spectroscopic techniques. In all cases, the bismuth oxido clusters form crystalline agglomerations with size, height, and distribution on the substrate that can be controlled by the choice of the solvent and of the deposition method.

Photocatalytic water purification under visible light using carbon nitride materials and β-Bi2O3 immobilized on electrospun polyvinyl acetate fibers

We report on the immobilization of carbon nitride (CN) materials and β-Bi2O3 on electrospun polyvinyl acetate (PVAc) fiber substrates using a dispersion based dip coating process. The spinning process was optimized by variation of several parameters to finally obtain continuous droplet-free fibers at 15 kV and a flow rate of 50 µL min−1 using a needle with 1.2 mm diameter. The polymer substrates were coated with the β-Bi2O3 and CN materials, which were characterized using SEM and applied in the photocatalytic degradation of organic pollutants such as Rhodamine B (RhB), ethinyl estradiol (EE2) and triclosan using visible light irradiation. The pollutants were degraded with up to 50% of the initial concentration within 8 h. Different amounts of CN material were deposited to evaluate the photocatalytic activity per mass. Immobilized CN materials were shown to be of higher activity (2.0 × 10−10 mol mg−1 min−1) than β-Bi2O3 (1.3 × 10−10 mol mg−1 min−1) and the mixture CN/β-Bi2O3 (1.6 × 10−10 mol mg−1 min−1). Reference samples with CN particles partially embedded in the polymer fleece showed minor degradaton rates (18% RhB degradation within 8 h) as compared to coated fiber substrates (47% RhB degradation within 8 h). Minor leaching of the carbon nitride material and no leaching of β-Bi2O3 occurs as shown by NPOC (non purgeable organic carbon) and ICP-MS measurements.

Polymorphism and Visible-Light-Driven Photocatalysis of Doped Bi2O3:M (M = S, Se, and Re)

δ-Bi₂O₃:M (M = S, Se, and Re) with an oxygen-defective fluorite-type structure is obtained by a coprecipitation method starting from the bismuth oxido cluster [Bi₃₈O₄₅(OMc)₂₄(dmso)₉]·2dmso·7H₂O (A) in the presence of additives such as Na₂SO₄, Na₂SeO₄, NH₄ReO₄, Na₂SeO₃·5H₂O, and Na₂SO₃. The coprecipitation of the starting materials with aqueous NaOH results in the formation of alkaline reaction mixtures, and the cubic bismuth(III)-based oxides Bi₁₄O₂₀(SO₄) (1c), Bi₁₄O₂₀(SeO₄) (2c), Bi₁₄O₂₀(ReO_4.5) (3c), Bi_12.25O_16.625(SeO₃)_1.75 (4c), and Bi_10.51O_14.765(SO₃)_0.49(SO₄)_0.51 (5c) are obtained after microwave-assisted heating; formation of compound 5c is the result of partial oxidation of sulfur. The compounds 1c, 2c, 4c, and 5c absorb UV light only, whereas compound 3c absorbs in the visible-light region of the solar spectrum. Thermal treatment of the as-prepared metastable bismuth(III) oxide chalcogenates 1c and 2c at T = 600 °C provides a monotropic phase transition into their tetragonal polymorphs Bi₁₄O₂₀(SO₄) (1t) and Bi₁₄O₂₀(SeO₄) (2t), while compound 3c is transformed into the tetragonal modification of Bi₁₄O₂₀(ReO_4.5) (3t) after calcination at T = 700 °C. Compounds of the systems Bi₂O₃-SO_x (x = 2 and 3) and Bi₂O₃-Re₂O₇ are thermally stable up to T = 800 °C, whereas compounds of the system Bi₂O₃-SeO₃ completely lose SeO₃. Thermal treatment of 4c and 5c in air results in the oxidation of the tetravalent to hexavalent sulfur and selenium, respectively, upon heating to T = 400-500 °C. The as-prepared cubic bismuth(III)-based oxides 1c-5c were studied with regard to the photocatalytic decomposition of rhodamine B under visible-light irradiation with compound 3c showing the highest turnover and efficiency.

Thin Coatings of α- and β-Bi2O3 by Ultrasonic Spray Coating of a Molecular Bismuth Oxido Cluster and their Application for Photocatalytic Water Purification Under Visible Light

Thin coatings of Bi2O3 were deposited on glass substrates by ultrasonic spray coating of THF solutions of the molecular precursor [Bi38O45(OMc)24(DMSO)9] ⋅ 2DMSO ⋅ 7H2O (OMc=O2CC3H5) followed by hydrolysis and subsequent annealing. Depending on the synthetic protocol, the bismuth oxido cluster was transformed into either α- or β-Bi2O3. The as-synthesized Bi2O3 coatings were characterized by powder X-ray diffraction (PXRD), thickness measurements, diffuse reflectance UV-Vis spectroscopy (DRS), photoluminescence (PL) spectroscopy, Raman spectroscopy and scanning electron microscopy (SEM). The thin coatings (thickness: 5-16 μm) were compared with regard to their performance in photocatalytic rhodamine B (RhB) decomposition under visible light irradiation. The β-Bi2O3 coatings, that showed the highest photocatalytic activity, were used for the photocatalytic decomposition of other pollutants such as triclosan and ethinyl estradiol. In addition, the interplay between the photooxidation that is induced by the excitation of the catalyst using visible light and the photosensitized decomposition pathway was studied by degradation experiments of aqueous rhodamine B solutions using β-Bi2O3 coatings.