Manufacturing 3D Biomimetic Tissue: A Strategy Involving the Integration of Electrospun Nanofibers with a 3D-Printed Framework for Enhanced Tissue Regeneration

3D printing and electrospinning are versatile techniques employed to produce 3D structures, such as scaffolds and ultrathin fibers, facilitating the creation of a cellular microenvironment in vitro. These two approaches operate on distinct working principles and utilize different polymeric materials to generate the desired structure. This review provides an extensive overview of these techniques and their potential roles in biomedical applications. Despite their potential role in fabricating complex structures, each technique has its own limitations. Electrospun fibers may have ambiguous geometry, while 3D-printed constructs may exhibit poor resolution with limited mechanical complexity. Consequently, the integration of electrospinning and 3D-printing methods may be explored to maximize the benefits and overcome the individual limitations of these techniques. This review highlights recent advancements in combined techniques for generating structures with controlled porosities on the micro-nano scale, leading to improved mechanical structural integrity. Collectively, these techniques also allow the fabrication of nature-inspired structures, contributing to a paradigm shift in research and technology. Finally, the review concludes by examining the advantages, disadvantages, and future outlooks of existing technologies in addressing challenges and exploring potential opportunities.

Overall perspective of electrospun semiconductor metal oxides as high-performance gas sensor materials for NOx detection

Gas sensors based on nanostructured semiconductor metal oxide (SMO) materials have been extensively investigated as key components due to their advantages over other materials, namely, high sensitivity, stability, affordability, rapid response and simplicity. However, the difficulty of working at high temperatures, response in lower concentration and their selectivity are huge challenges of SMO materials for detecting gases. Therefore, researchers have not stopped their quest to develop new gas sensors based on SMOs with higher performance. This paper begins by highlighting the importance of nitrogen monoxide (NO) and nitrogen dioxide (NO2) detection for human health and addresses the challenges associated with existing methods in effectively detecting them. Subsequently, the mechanism of SMO gas sensors, analysis of their structure and fabrication techniques focusing on electrospinning technique, as well as their advantages, difficulties, and structural design challenges are discussed. Research on enhancing the sensing performance through tuning the fabrication parameters are summarized as well. Finally, the problems and potential of SMO based gas sensors to detect NOx are revealed, and the future possibilities are stated.

Mechanisms and prospects of piezoelectric materials as smart delivery vehicles in cancer treatment

Piezoelectric materials, capable of converting mechanical energy into electrical energy and vice versa, have emerged as promising candidates for designing intelligent drug delivery vehicles. Leveraging their inherent electrical properties, these materials respond to external stimuli, such as mechanical forces and electrical signals, to control drug release. By integrating piezoelectric materials into drug delivery systems, we can achieve exacting control over drug-release mechanisms. Piezoelectric materials hold enormous promise as smart delivery vehicles in cancer treatment, responding to mechanical and electrical cues, enabling site-specific drug release, reducing systemic toxicity and enhancing therapeutic effectiveness. Further advancements in the field are expected to lead to innovative piezoelectric-based systems that can revolutionize cancer treatment strategies, as explored in this review article.

Surface-Modified Electrospun Glass Nanofibers from Silane Treatment and Their Use for High-Performance Epoxy-Based Nanocomposite Materials

As a new and promising reinforcing filler, electrospun glass nanofibers (EGNFs) have attracted attention in the field of polymer composite materials. However, the reinforcing effectiveness of surface-modified EGNFs using different silane coupling agents in epoxy resin is still not quite clear. In this research, a series of silane coupling agents with increasing chain lengths in the order of methyl trimethoxysilane (MTMS), (3-aminopropyl) triethoxysilane (APTES), (3-glycidyloxypropyl) trimethoxysilane (GPTMS), and dual silane coupling agent APTES-GPTMS were employed to carry out surface treatment on the EGNFs. The pristine and silane functionalized EGNFs were then incorporated into epoxy resin as reinforcing fillers at low loading levels, i.e., 0.25 wt.%, 0.5 wt.%, and 1 wt.%, and the mechanical properties of the resultant epoxy nanocomposites, including strength, stiffness, ductility, and toughness, were evaluated. A commercial product of glass nanoparticles (GNPs) was used as a control to compare the reinforcing effectiveness of the EGNFs and the GNPs. This study revealed that the EGNFs could provide significant reinforcing and toughening effects at ultra-low loading (0.25 wt.%) in epoxy nanocomposite materials. Furthermore, surface modification of the EGNFs with silane coupling agents with long chain lengths, e.g., by using dual silane coupling agents, APTES-GPTMS, could enhance the interfacial bonding between the EGNFs and the epoxy matrix and further increase the mechanical performance of the EGNF-reinforced epoxy nanocomposite materials. Through this research, we realized epoxy nanocomposite materials with much-improved mechanical properties, i.e., 37%, 24%, 18%, 57% improvement in strength, stiffness, ductility, and toughness, respectively, with respect to those of the cured neat epoxy material with an ultra-low loading (0.25 wt.%) of APTES-GPTMS-EGNFs. Our research paves the road for developing lighter and stronger epoxy nanocomposite materials with EGNFs.

Photoactivated plasmonic nanohybrid fibers with prolonged trapping of excited charge carriers for SERS analysis of biomolecules

The quest to enhance Raman spectroscopic signals through the rational design of plasmonic substrates has enabled the detection and characterization of pharmaceutically important molecules with low scattering cross-sections, such as amino acids and proteins, and is helping in making forays into the diverse field of biomedical sciences. This work presents a simple strategy for synthesizing silver nanoparticles-incorporated alumina nanofibers (Ag-AlNFs) utilizing controlled microwave synthesis for enhancing the surface-enhanced Raman chemical enhancement factor through photo-induced charge accumulation at the plasmonic-dielectric interface. The plasmonic-dielectric fibers serve as excellent charge carrier trappers, as evident from the ultrafast transient absorption spectroscopy studies. Apart from chemical enhancement, the increase in electronic surface charge also enables the protein disulfide bonds to capture these electrons and form a transient disulfide electron adduct radical, which converts to free thiol radical on dissociation. This allows protein molecules to bind to the nanoparticle's surface with the favorable silver thiol bond leading to greater surface affinity and larger SERS enhancement. The proposed Ag-AlNFs represent a cost-effective material that can be potentially used to probe biological systems in a label-free manner by photoactivating the SERS substrate for obtaining higher enhancement factors.

Advances in Noble Metal-Decorated Metal Oxide Nanomaterials for Chemiresistive Gas Sensors: Overview

Highly sensitive gas sensors with remarkably low detection limits are attractive for diverse practical application fields including real-time environmental monitoring, exhaled breath diagnosis, and food freshness analysis. Among various chemiresistive sensing materials, noble metal-decorated semiconducting metal oxides (SMOs) have currently aroused extensive attention by virtue of the unique electronic and catalytic properties of noble metals. This review highlights the research progress on the designs and applications of different noble metal-decorated SMOs with diverse nanostructures (e.g., nanoparticles, nanowires, nanorods, nanosheets, nanoflowers, and microspheres) for high-performance gas sensors with higher response, faster response/recovery speed, lower operating temperature, and ultra-low detection limits. The key topics include Pt, Pd, Au, other noble metals (e.g., Ag, Ru, and Rh.), and bimetals-decorated SMOs containing ZnO, SnO2, WO3, other SMOs (e.g., In2O3, Fe2O3, and CuO), and heterostructured SMOs. In addition to conventional devices, the innovative applications like photo-assisted room temperature gas sensors and mechanically flexible smart wearable devices are also discussed. Moreover, the relevant mechanisms for the sensing performance improvement caused by noble metal decoration, including the electronic sensitization effect and the chemical sensitization effect, have also been summarized in detail. Finally, major challenges and future perspectives towards noble metal-decorated SMOs-based chemiresistive gas sensors are proposed.

A Sequential Electrospinning of a Coaxial and Blending Process for Creating Double-Layer Hybrid Films to Sense Glucose

This study presents a glucose biosensor based on electrospun core-sheath nanofibers. Two types of film were fabricated using different electrospinning procedures. Film F1 was composed solely of core-sheath nanofibers fabricated using a modified coaxial electrospinning process. Film F2 was a double-layer hybrid film fabricated through a sequential electrospinning and blending process. The bottom layer of F2 comprised core-sheath nanofibers fabricated using a modified process, in which pure polymethacrylate type A (Eudragit L100) was used as the core section and water-soluble lignin (WSL) and phenol were loaded as the sheath section. The top layer of F2 contained glucose oxidase (GOx) and gold nanoparticles, which were distributed throughout the polyvinylpyrrolidone K90 (PVP K90) nanofibers through a single-fluid blending electrospinning process. The study investigated the sequential electrospinning process in detail. The experimental results demonstrated that the F2 hybrid film had a higher degradation efficiency of β-D-glucose than F1, reaching a maximum of over 70% after 12 h within the concentration range of 10-40 mmol/L. The hybrid film F2 is used for colorimetric sensing of β-D-glucose in the range of 1-15 mmol/L. The solution exhibited a color that deepened gradually with an increase in β-D-glucose concentration. Electrospinning is flexible in creating structures for bio-cascade reactions, and the double-layer hybrid film can provide a simple template for developing other sensing nanomaterials.

Electrospun Materials Based on Polymer and Biopolymer Blends-A Review

This review covers recent developments and progress in polymer and biopolymer blending and material preparation by electrospinning. Electrospinning is a technique that is used to produce nanofibers to improve the quality of membranes. Electrospun nanofibers are highly applicable in biomedical sciences, supercapacitors, and in water treatment following metal ion adsorption. The key affecting factors of electrospinning have been checked in the literature to obtain optimal conditions of the electrospinning process. Future research directions and outlooks have been suggested to think about innovative ideas for research in this field.

Impact of the Morphology of Electrospun Lignin/Ethylcellulose Nanostructures on Their Capacity to Thicken Castor Oil

This study reports on a novel strategy for manufacturing thickened gel-like castor oil formulations by dispersing electrospun lignin/ethylcellulose nanostructures. These thickened formulations were rheologically and tribologically evaluated with the aim of being proposed as alternative ecofriendly lubricating greases. Low-sulfonate kraft lignin (LSL) and ethylcellulose (EC) were dissolved in a DMAc:THF mixture at different concentrations (8, 10, and 15 wt.%) and LSL:EC ratios (50:50, 70:30, and 90:10) and subjected to electrospinning. The resulting electrospun nanostructures were morphologically characterized. EC acting as the cospinning polymer improved both LSL spinnability and the oil structuring ability. Solutions with a high lignin content achieved microsized particles connected by fibrils, whereas solutions with a high EC content (50:50 ratio) and LSL/EC total concentration (10 and 15 wt.%) yielded beaded or bead-free nanofibers, due to enhanced extensional viscoelastic properties and nonNewtonian characteristics. The gel-like properties of electrospun nanostructure dispersions in castor oil were strengthened with the nanostructure concentration and the EC:LSL ratio, as a result of the formation of a more interconnected fiber network. The oleodispersions studied exhibited a satisfactory frictional response in a tribological contact, with friction coefficient values that were comparable to those achieved with traditional lithium-lubricating greases.

Recent advances and remaining barriers to the development of electrospun nanofiber and nanofiber composites for point-of-use and point-of-entry water treatment systems

In this review, we focus on electrospun nanofibers as a promising material alternative for the niche application of decentralized, point-of-use (POU) and point-of-entry (POE) water treatment systems. We focus our review on prior work with various formulations of electrospun materials, including nanofibers of carbon, pure metal oxides, functionalized polymers, and polymer-metal oxide composites, that exhibit analogous performance to media (e.g., activated carbon, ion exchange resins) commonly used in commercially available, certified POU/POE devices for contaminants including organic pollutants, metals (e.g., lead) and persistent oxyanions (e.g., nitrate). We then analyze the relevant strengths and remaining research and development opportunities of the relevant literature based on an evaluation framework that considers (i) performance comparison to commercial analogs; (ii) appropriate pollutant targets for POU/POE applications; (iii) testing in flow-through systems consistent with POU/POE applications; (iv) consideration of water quality effects; and (v) evaluation of material strength and longevity. We also identify several emerging issues in decentralized water treatment where nanofiber-based POU/POE devices could help meet existing needs including their use for treatment of uranium, disinfection, and in electrochemical treatment systems. To date, research has demonstrated promising material performance toward relevant targets for POU/POE applications, using appropriate aquatic matrices and considering material stability. To fully realize their promise as an emerging treatment technology, our analysis of the available literature reveals the need for more work that benchmarks nanofiber performance against established commercial analogs, as well as fabrication and performance validation at scales and under conditions simulating POU/POE water treatment.

Recent Progress in Protective Membranes Fabricated via Electrospinning: Advanced Materials, Biomimetic Structures, and Functional Applications

Electrospinning is a significant micro/nanofiber processing technology and has been rapidly developing in the past 2 decades. It has several applications, including advanced sensing, intelligent manufacturing, and high-efficiency catalysis. Here, multifunctional protective membranes fabricated via electrospinning in terms of novel material design, construction of novel structures, and various protection requirements in different environments are reviewed. To achieve excellent comprehensive properties, such as, high water vapor transmission, high hydrostatic pressure, optimal mechanical property, and air permeability, combinations of novel materials containing nondegradable/degradable materials and functional structures inspired by nature have been investigated for decades. Currently, research is mainly focused on conventional protective membranes with multifunctional properties, such as, anti-UV, antibacterial, and electromagnetic-shielding functions. However, important aspects, such as, the properties of electrospun monofilaments, development of "green electrospinning solutions" with high solid content, and approaches for enhancing adhesion between hydrophilic and hydrophobic layers are not considered. Based on this systematic review, the development of electrospinning for protective membranes is discussed, the existing gaps in research are discussed, and solutions for the development of technology are proposed. This review will assist in promoting the diversified development of protective membranes and is of great significance for fabricating advanced materials for intelligent protection.

Multifunctional Membranes-A Versatile Approach for Emerging Pollutants Removal

This paper presents a comprehensive literature review surveying the most important polymer materials used for electrospinning processes and applied as membranes for the removal of emerging pollutants. Two types of processes integrate these membrane types: separation processes, where electrospun polymers act as a support for thin film composites (TFC), and adsorption as single or coupled processes (photo-catalysis, advanced oxidation, electrochemical), where a functionalization step is essential for the electrospun polymer to improve its properties. Emerging pollutants (EPs) released in the environment can be efficiently removed from water systems using electrospun membranes. The relevant results regarding removal efficiency, adsorption capacity, and the size and porosity of the membranes and fibers used for different EPs are described in detail.

Flexible Ceramic Fibers: Recent Development in Preparation and Application

Flexible ceramic fibers (FCFs) have been developed for various advanced applications due to their superior mechanical flexibility, high temperature resistance, and excellent chemical stability. In this article, we present an overview on the recent progress of FCFs in terms of materials, fabrication methods, and applications. We begin with a brief introduction to FCFs and the materials for preparation of FCFs. After that, various methods for preparation of FCFs are discussed, including centrifugal spinning, electrospinning, solution blow spinning, self-assembly, chemical vapor deposition, atomic layer deposition, and polymer conversion. Recent applications of FCFs in various fields are further illustrated in detail, including thermal insulation, air filtration, water treatment, sound absorption, electromagnetic wave absorption, battery separator, catalytic application, among others. Finally, some perspectives on the future directions and opportunities for the preparation and application of FCFs are highlighted. We envision that this review will provide readers with some meaningful guidance on the preparation of FCFs and inspire them to explore more potential applications.

Development of Electrospun Nanofibrous Filters for Controlling Coronavirus Aerosols

Airborne transmission of SARS-CoV-2 plays a critical role in spreading COVID-19. To protect public health, we designed and fabricated electrospun nanofibrous air filters that hold promise for applications in personal protective equipment (PPE) and the indoor environment. Due to ultrafine nanofibers (∼300 nm), the electrospun air filters had a much smaller pore size in comparison to the surgical mask and cloth masks (a couple of micrometers versus tens to hundreds of micrometers). A coronavirus strain served as a SARS-CoV-2 surrogate and was used to generate aerosols for filtration efficiency tests, which can better represent SARS-CoV-2 in comparison to other agents used for aerosol generation in previous studies. The electrospun air filters showed excellent performance by capturing up to 99.9% of coronavirus aerosols, which outperformed many commercial face masks. In addition, we observed that the same electrospun air filter or face mask removed NaCl aerosols equivalently or less effectively in comparison to the coronavirus aerosols when both aerosols were generated from the same system. Our work paves a new avenue for advancing air filtration by developing electrospun nanofibrous air filters for controlling SARS-CoV-2 airborne transmission.

The synthesis and characterization of Fe2O3@SiO2-SO3H nanofibers as a novel magnetic core-shell catalyst for formamidine and formamide synthesis

Over the past several decades, the fabrication of novel ceramic nanofibers applicable in different areas has been a frequent focus of scientists around the world. Aiming to introduce novel ceramic core-shell nanofibers as a magnetic solid acid catalyst, Fe2O3@SiO2-SO3H magnetic nanofibers were prepared in this study using a modification of Fe2O3@SiO2 core-shell nanofibers with chlorosulfonic acid to increase the acidic properties of these ceramic nanofibers. The products were characterized by scanning electron microscope (SEM), transmission electron microscope (TEM), energy dispersive X-ray spectroscope (EDS), vibrating sample magnetometer (VSM), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR). The prepared nanofibers were used as catalysts in formamide and formamidine synthesis. The treatment of aqueous formic acid using diverse amines with a catalytic amount of Fe2O3@SiO2-SO3H nanofibers as a reusable, magnetic and heterogeneous catalyst produced high yields of corresponding formamides at room temperature. Likewise, the reaction of diverse amines with triethyl orthoformate led to the synthesis of formamidine derivatives in excellent yields using this novel catalyst. The catalytic system was able to be recovered and reused at least five times without any catalytic activity loss. Thus, novel core-shell nanofibers can act as efficient solid acid catalysts in different organic reactions capable of being reused several times due to their easy separation by applying magnet.

Nanosized SnO2 Prepared by Electrospinning: Influence of the Polymer on Both Morphology and Microstructure

An electrospinning (ES) procedure of polymeric solutions containing metal oxide precursors, followed by thermal treatments, was exploited to obtain SnO₂ nanofibers. Attention was focused on the effect of different templating polymers (polyvinyl pyrrolidone (PVP), polyethylene oxide (PEO) and polyvinyl acetate (PVAc)) on the morphologies and particle size distributions of SnO₂. We demonstrated that with different polymers, the final oxide's morphology and crystallite size change. Defined fibers, with homogeneous diameter, were obtained with each polymer, but, after calcination, the morphology of the oxide changes, leading to fibers, "flakes" or "sphere-shaped" particles when PVP, PEO or PVAc were used, respectively, as evidenced by SEM images. Data from HR-TEM and XRD measurements confirm that SnO₂ samples consist of crystalline cassiterite, with small mean particle dimensions calculated by Debye-Scherrer equation, i.e., 30, 11 and 25 nm with PVP, PEO and PVAc, respectively. TEM measurements put in evidence lower average particle sizes and for SnO₂ obtained with PEO average size of 8.5 nm with a standard deviation of ±4.9 nm was evidenced. By applying different calcination temperatures on fiber mat obtained by the same polymer, i.e., PEO, the influence of polymer not only on the final shape of the oxide particles but also on the crystallite size was definitively demonstrated.

A Review on Electrospun PVC Nanofibers: Fabrication, Properties, and Application

Polyvinyl chloride (PVC) is a widely used polymer, not only in industry, but also in our daily life. PVC is a material that can be applied in many different fields, such as building and construction, health care, and electronics. In recent decades, the success of electrospinning technology to fabricate nanofibers has expanded the applicability of polymers. PVC nanofibers have been successfully manufactured by electrospinning. By changing the initial electrospinning parameters, it is possible to obtain PVC nanofibers with diameters ranging from a few hundreds of nanometers to several micrometers. PVC nanofibers have many advantages, such as high porosity, high mechanical strength, large surface area, waterproof, and no toxicity. PVC nanofibers have been found to be very useful in many fields with a wide variety of applications such as air filtration systems, water treatment, oil spill treatment, batteries technology, protective clothing, corrosion resistance, and many others. This paper reviews the fabricating method, properties, applications, and prospects of PVC nanofibers.

A Mini-Review: Needleless Electrospinning of Nanofibers for Pharmaceutical and Biomedical Applications

Electrospinning (ES) is a convenient and versatile method for the fabrication of nanofibers and has been utilized in many fields including pharmaceutical and biomedical applications. Conventional ES uses a needle spinneret for the generation of nanofibers and is associated with many limitations and drawbacks (i.e., needle clogging, limited production capacity, and low yield). Needleless electrospinning (NLES) has been proposed to overcome these problems. Within the last two decades (2004–2020), many research articles have been published reporting the use of NLES for the fabrication of polymeric nanofibers intended for drug delivery and biomedical tissue engineering applications. The objective of the present mini-review article is to elucidate the potential of NLES for designing such novel nanofibrous drug delivery systems and tissue engineering constructs. This paper also gives an overview of the key NLES approaches, including the most recently introduced NLES method: ultrasound-enhanced electrospinning (USES). The technologies underlying NLES systems and an evaluation of electrospun nanofibers are presented. Even though NLES is a promising approach for the industrial production of nanofibers, it is a multivariate process, and more research work is needed to elucidate its full potential and limitations.

Continuous fiberizing by laser melting (Cofiblas): Production of highly flexible glass nanofibers with effectively unlimited length

The development of nanofibers is expected to foster the creation of outstanding lightweight nanocomposites and flexible and transparent composites for applications such as optoelectronics. However, the reduced length of existing nanofibers and nanotubes limits mechanical strengthening and effective manufacturing. Here, we present an innovative method that produces glass nanofibers with lengths that are, effectively, unlimited by the process. The method uses a combination of a high-power laser with a supersonic gas jet. We describe the experimental setup and the physical processes involved, and, with the aid of a mathematical simulation, identify and discuss the key parameters which determine its distinctive features and feasibility. This method enabled the production of virtually unlimited long, solid, and nonporous glass nanofibers that display outstanding flexibility and could be separately arranged and weaved.

Electrospinning Piezoelectric Fibers for Biocompatible Devices

The field of nanotechnology has been gaining great success due to its potential in developing new generations of nanoscale materials with unprecedented properties and enhanced biological responses. This is particularly exciting using nanofibers, as their mechanical and topographic characteristics can approach those found in naturally occurring biological materials. Electrospinning is a key technique to manufacture ultrafine fibers and fiber meshes with multifunctional features, such as piezoelectricity, to be available on a smaller length scale, thus comparable to subcellular scale, which makes their use increasingly appealing for biomedical applications. These include biocompatible fiber-based devices as smart scaffolds, biosensors, energy harvesters, and nanogenerators for the human body. This paper provides a comprehensive review of current studies focused on the fabrication of ultrafine polymeric and ceramic piezoelectric fibers specifically designed for, or with the potential to be translated toward, biomedical applications. It provides an applicative and technical overview of the biocompatible piezoelectric fibers, with actual and potential applications, an understanding of the electrospinning process, and the properties of nanostructured fibrous materials, including the available modeling approaches. Ultimately, this review aims at enabling a future vision on the impact of these nanomaterials as stimuli-responsive devices in the human body.

Nanopiezoelectric Devices for Energy Generation Based on ZnO Nanorods/Flexible-Conjugated Copolymer Hybrids Using All Wet-Coating Processes

In this study, nanopiezoelectric devices based on ZnO nanorod array/conducting polymers are fabricated for wearable power generation application. To replace the inorganic rigid indium-tin oxide (ITO) conducting coating commonly used in the nanogenerator devices, a series of flexible polyaniline-based conducting copolymers underlying the perpendicularly-oriented ZnO nanorod arrays has been synthesized with improved electric conductivity by the copolymerization of aniline and 3,4-ethylenedioxythiophene (EDOT) monomers in order to optimize the piezoelectric current collection efficiency of the devices. It is found that significantly higher conductivity can be obtained by small addition of EDOT monomer into aniline monomer solution using an in-situ oxidative polymerization method for the synthesis of the copolymer coatings. The highest conductivity of aniline-rich copolymer is 65 S/cm, which is 2.5 times higher than that for homopolymer polyaniline coating. Subsequently, perpendicularly-oriented ZnO nanorod arrays are fabricated on the polyaniline-based copolymer substrates via a ZnO nanoparticle seeded hydrothermal fabrication process. The surface morphology, crystallinity, orientation, and crystal size of the synthesized ZnO nanorod arrays are fully examined with various synthesis parameters for copolymer coatings with different monomer compositions. It is found that piezoelectric current generated from the devices is at least five times better for the device with improved electric conductivity of the copolymer and the dense formation of ZnO nanorod arrays on the coating. Therefore, these results demonstrate the advantage of using flexible π-conjugated copolymer films with enhanced conductivity to further improve piezoelectric performance for future wearable energy harvesting application based on all wet chemical coating processes.

Preparation of Zirconia Nanofibers by Electrospinning and Calcination with Zirconium Acetylacetonate as Precursor

For the first time, zirconia nanofibers with an average diameter of about 75 nm have been fabricated by calcination of electrospun zirconium acetylacetonate/polyacrylonitrile fibers in the range of 500-1100 °C. Composite and ceramic filaments have been characterized by scanning electron microscopy, thermogravimetric analysis, nitrogen adsorption analysis, energy-dispersive X-ray spectroscopy, and X-ray diffractometry. The stages of the transition of zirconium acetylacetonate to zirconia have been revealed. It has been found out that a rise in calcination temperature from 500 to 1100 °C induces transformation of mesoporous tetragonal zirconia nanofibers with a high specific surface area (102.3 m²/g) to non-porous monoclinic zirconia nanofibers of almost the same diameter with a low value of specific surface area (8.3 m²/g). The tetragonal zirconia nanofibers with high specific surface area prepared at 500 °C can be considered, for instance, as promising supports for heterogeneous catalysts, enhancing their activity.

Fabrication of Designable and Suspended Microfibers via Low-Voltage 3D Micropatterning

Building two-dimensional (2D) and three-dimensional (3D) fibrous structures in the micro- and nanoscale will offer exciting prospects for numerous applications spanning from sensors to energy storage and tissue engineering scaffolds. Electrospinning is a well-suited technique for drawing micro- to nanoscale fibers, but current methods of building electrospun fibers in 3D are restrictive in terms of printed height, design of macroscopic fiber networks, and choice of polymer. Here, we combine low-voltage electrospinning and additive manufacturing as a method to pattern layers of suspended mesofibers. Layers of fibers are suspended between 3D-printed supports in situ in multiple fiber layers and designable orientations. We examine the key working parameters to attain a threshold for fiber suspension, use those behavioral observations to establish a "fiber suspension indicator", and demonstrate its utility through design of intricate suspended fiber architectures. Individual fibers produced by this method approach the micrometer/submicrometer scale, while the overall suspended 3D fiber architecture can span over a centimeter in height. We demonstrate an application of suspended fiber architectures in 3D cell culture, utilizing patterned fiber topography to guide the assembly of suspended high-cellular-density structures. The solution-based fiber suspension patterning process we report offers a unique competence in patterning soft polymers, including extracellular matrix-like materials, in a high resolution and aspect ratio. The platform could thus offer new design and manufacturing capabilities of devices and functional products by incorporating functional fibrous elements.

Electrospinning Fabricating Au/TiO2 Network-like Nanofibers as Visible Light Activated Photocatalyst

Exploiting photocatalysts with characteristics of low cost, high reactivity and easy recovery offer great potentials for complete elimination of toxic chemicals and environmental remediation. In this work, Au/TiO2 network-like nanofibers were fabricated using a facile electrospinning technique followed by calcinations in air. Photocatalytic tests indicate that the Au/TiO2 network-like nanofibers possess an excellent photodegradation rate of rhodamine B (RB) under UV, visible and natural light radiation. The enhanced photocatalytic activity can be attributed to the plasmonic resonance absorption of Au nanoparticles, and photogenerated electrons and holes are effectively separated by the Au/TiO2 heterojunction structures. Furthermore, the three-dimensional network structure can provide a large number of active sites for RB degradation.

Study on Nanofibrous Catalysts Prepared by Electrospinning for Methane Partial Oxidation

Electrospinning is a simple and efficient technique for fabricating fibrous catalysts. The effects of preparation parameters on catalyst performance were investigated on fibrous Ni/Al2O3 catalysts. The catalyst prepared with H2O/C2H5OH solvent showed higher catalytic activity than that with DMF/C2H5OH solvent because of the presence of NiO in the catalyst prepared with DMF/C2H5OH solvent. The metal ion content of the precursor also influences catalyst properties. In this work, the Ni/Al2O3 catalyst prepared with a solution containing the metal ion content of 30 wt % demonstrated the highest Ni dispersion and therefore the highest catalytic performance. Additionally, the Ni dispersion decreased as calcination temperature was enhanced from 700 to 900 °C due to the increased Ni particle sizes, which also caused a high reduction temperature and low catalytic activity in methane partial oxidation. Finally, the fibrous Ni/Al2O3 catalysts can achieve high syngas yields at high reaction temperatures and high gas flow rates.

Electrospinning and Electrospun Nanofibers: Methods, Materials, and Applications

Electrospinning is a versatile and viable technique for generating ultrathin fibers. Remarkable progress has been made with regard to the development of electrospinning methods and engineering of electrospun nanofibers to suit or enable various applications. We aim to provide a comprehensive overview of electrospinning, including the principle, methods, materials, and applications. We begin with a brief introduction to the early history of electrospinning, followed by discussion of its principle and typical apparatus. We then discuss its renaissance over the past two decades as a powerful technology for the production of nanofibers with diversified compositions, structures, and properties. Afterward, we discuss the applications of electrospun nanofibers, including their use as "smart" mats, filtration membranes, catalytic supports, energy harvesting/conversion/storage components, and photonic and electronic devices, as well as biomedical scaffolds. We highlight the most relevant and recent advances related to the applications of electrospun nanofibers by focusing on the most representative examples. We also offer perspectives on the challenges, opportunities, and new directions for future development. At the end, we discuss approaches to the scale-up production of electrospun nanofibers and briefly discuss various types of commercial products based on electrospun nanofibers that have found widespread use in our everyday life.

Fabrication of Ultrafine PPS Fibers with High Strength and Tenacity via Melt Electrospinning

Electrospinning (e-spinning) is an emerging technique to prepare ultrafine fibers. Polyphenylene sulfide (PPS) is a high-performance resin which does not dissolve in any solvent at room temperature. Commercial PPS fibers are produced mainly by meltblown or spunbonded process to give fibers ~20 μm in diameter. In this research, an in-house designed melt electrospinning device was used to fabricate ultrafine PPS fibers, and the e-spinning operation conducted under inert gas to keep PPS fibers from oxidizing. Under the optimum e-spinning conditions (3 mm of nozzle diameter, 30 kV of electrostatic voltage, and 9.5 cm of tip-to-collector distance), the as-spun fibers were less than 8.0 μm in diameter. After characterization, the resultant PPS fibers showed uniform diameter and structural stability. Compared with commercial PPS staple fibers, the obtained fibers had a cold crystallization peak and 10 times higher storage modulus, thereby offering better tensile tenacity and more than 400% elongation at break.

The fabrication of a 3D current collector with bitter melon-like TiO2-NCNFs for highly stable lithium-sulfur batteries

The conductive 3D freestanding N-doped carbon nanofibers (NCNFs) current collector was embedded with homogeneously polar TiO2 nanoparticles. This current collector used for the sulfur cathode exhibits strong chemical adsorption for hindering the shuttle effect of polysulfides, and demonstrates a high specific capacity of 865 mA h g-1 at 0.2C and excellent cycle performance (200 cycles with capacity retention of 91%).

A non-enzymatic glucose sensor based on electrospun 3-D copper oxide micro-nanofiber network films using carboxylic-functionalized poly(arylene ether ketone)s as templates

3-D network films of rope-like CuO-MNFs with high surface-to-volume ratio were prepared. The product is a promising electrode material for fabrication of amperometric enzymeless glucose sensors.

Electrospun porous hybrid CuO/CdO nanofibers using carboxylic-functionalized poly(arylene ether ketone)s as a template for glucose determination

As a high performance polymer, PCA-poly(arylene ether ketone) (PAEK) was first used as a template to fabricate hybrid copper oxide (CuO)/cadmium oxide (CdO) nanofibers (NFs) via electrospinning and subsequent calcination. Porous NFs with a mean diameter of 463 nm were obtained. The formation of morphology was decided by the ion exchange reaction between the functional groups on polymer template and metal ions, which was proved by Fourier transform infrared spectra. Energy-dispersive X-ray spectrometer and X-ray powder diffractometry spectra demonstrated the obtained substance was CuO/CdO compound. The products were then investigated in detail for direct electrocatalytic oxidation of glucose, which was evaluated by cyclic voltammetry and chronoamperometry. Results revealed a similar anti-interference, higher sensitive, and faster response of glucose than the fibers produced from traditional template at +0.40 V. The improved performances were ascribed to the porous morphology which increased the surface-to-volume ratio. The porous morphology was found to be decided by the immobilization of metal ions onto PCA-PAEK. In conclusion, the functional group on PCA-PAEK side chain was the decisive factor to prepare CuO/CdO NFs with special morphology and good electrooxidation performances.

Graphene Oxide as a Nanocarrier for Controlled Loading and Targeted Delivery of Typhonium giganteum Drugs

In this study, Typhonium giganteum containing dual-function nanofibers composed of poly(butylene carbonate), polylactic acid, and graphene oxide (PBC/PLA/GO) were successfully fabricated by electrospinning. The results from thermogravimetric analysis (TG), differential scanning calorimetry (DSC), and Fourier-transform infrared spectroscopy (FTIR) indicate that no interactions occurred between PBC and PLA. The nanofiber microstructure upon which graphene oxide was evenly distributed was studied by scanning electron microscopy (SEM) and showed good silk properties. The nanofibers can be used as a drug carrier since loaded Typhonium giganteum fibers possess excellent biocompatibility. Such nanofibers are effective in inhibiting the proliferation of A549 lung cancer cells, and thus they have potential for replacing chemotherapy-based treatments of lung cancer. In addition, the PBC/PLA/GO nanofibers degrade in physiological and natural environments, which is an important feature when engineering tissues and environment-friendly materials.

Static-Aligned Piezoelectric Poly (Vinylidene Fluoride) Electrospun Nanofibers/MWCNT Composite Membrane: Facile Method

Polyvinylidene Fluoride (PVDF) piezoelectric electrospun nanofibers have been intensively used for sensing and actuation applications in the last decade. However, in most cases, random PVDF piezoelectric nanofiber mats have moderate piezoelectric response compared to aligned PVDF nanofibers. In this work, we demonstrate the effect of alignment conducted by a collector setup composed of two-metal bars with gab inside where the aligned fiber can be formed. That is what we called static aligned nanofibers, which is distinct from the dynamic traditional technique using a high speed rotating drum. The two-bar system shows a superior alignment degree for the PVDF nanofibers. Also, the effect of added carbon nanotubes (CNTs) of different concentrations to PVDF nanofibers is studied to observe the enhancement of piezoelectric response of PVDF nanofibers. Improvement of β-phase content of aligned (PVDF) nanofibers, as compared to randomly orientated fibers, is achieved. Significant change in the piezoelectricity of PVDF fiber is produced with added CNTs with saturation response in the case of 0.3 wt % doping of CNTs, and piezoelectric sensitivity of 73.8 mV/g with applied masses down to 100 g.

Electrospun p-Type Nickel Oxide Semiconducting Nanowires for Low-Voltage Field-Effect Transistors

One-dimensional metal-oxide nanowires are regarded as important building blocks in nanoscale electronics, because of their unique mechanical and electrical properties. In this work, p-type nickel oxide nanowires (NiO NWs) were fabricated by combining sol-gel and electrospinning processes. The poly(vinylpyrrolidone) (PVP) with a molecular weight of 1 300 000 was used as the polymer matrix to increase the viscosity of a NiO precursor solution. The formation and properties of the as-spun NiO/PVP composite NWs before/after calcination treatment were investigated using various techniques. Because of the enhanced adhesion properties between ultraviolet (UV)-treated NiO NWs and the substrate, the field-effect transistors (FETs) based on NiO NWs were found to exhibit satisfying p-channel behaviors. For the fabrication of aligned NiO NW arrays, two parallel conducting Si strips were grounded as NW collector. The integrated FETs based on aligned NiO NWs were demonstrated to exhibit superior electrical performance, compared to the disordered counterparts with the comparable NW coverage. By employing high- k aluminum oxide (Al₂O₃) as a dielectric layer, instead of conventional SiO₂, the devices with an aligned NiO NW array exhibit a high hole mobility of 2.8 cm²/(V s) with a low operating voltage of 5 V, fast switching speed, and successful modulation of light emission over external light-emitting diodes. To the best of our knowledge, this is the first work demonstrating the low-voltage transistors based on p-type oxide NWs, which represents a great step toward the development of sensors and CMOS logic circuits.

Synergism of fictitious forces on nickel cobaltite nanofibers: electrospinning forces revisited

The morphology and structure of electrospun NiCo₂O₄ nanofibers were tuned by an appropriate choice of collector and modifying relevant physical forces.

Electrospun nanofiber reinforced composites: a review

High performance electrospun nanofibers could be used to fabricate nanofiber reinforced composites.

Ultrasonic-assisted dyeing of Nylon-6 nanofibers

We first time report ultrasonic dyeing of the Nylon 6 nanofibers with two disperse dyes CI Disperse blue 56 and CI Disperse Red 167:1 by utilising ultrasonic energy during dyeing process. The Nylon 6 nanofibers were fabricated via electrospinning and dyed via batchwise method with and without sonication. Results revealed that ultrasonic dyeing produce higher color yield (K/S values) and substantially reduces dyeing time from 60min for conventional dyeing to 30min can be attributed to breakage of dye aggregate, transient cavitation near nanofiber surface and mass transfer within/between nanofibers. Color fastness results exhibited good to very good dye fixation. SEM images exhibit insignificant effect of sonication on morphology of the nanofibers. Our research results demonstrate ultrasonic dyeing as a better dyeing technique for Nylon 6 nanofibers with higher color yield and substantially reduced dyeing time.