States of water, surface and rheological characterisation of a new biohydrogel as articular cartilage substitute

Preparation, characterization and antioxidant activity of cobalt polysaccharides from Qingzhuan Dark Tea

The paradoxical effects of cobalt in biological processes have caused controversy regarding the application of cobalt-based biomaterials. Cobalt has recently been shown to be a trace element that promotes bone growth. Qingzhuan Dark Tea polysaccharides (TPS) has been shown to be a biomaterial with antioxidant and immunomodulatory effects. In order to develop a novel immunomodulatory biomaterial, we synthesized polysaccharide cobalt complex (TPS-Co) to prevent the paradoxical effects of cobalt while maintaining its beneficial effects, and evaluated its morphology, structure, and antioxidant activity. Fourier-transform infrared spectroscopy, X-ray diffraction and X-ray photoelectron spectroscopy demonstrated that cobalt complexed successfully with TPS. Scanning electron microscopy and atomic mechanical microscopy demonstrated that TPS-Co has a more homogeneous and concentrated morphological distribution compared to TPS. Thermal performance analysis demonstrated that TPS-Co has higher thermal stability. Atomic absorption spectroscopy showed a cobalt content of 3.8%. Ultraviolet spectroscopy indicated that TPS-Co does not contain nucleic acids and proteins. Antioxidant activity assays showed that TPS-Co has better antioxidant activity than TPS in the concentration range of 0.4-2 mg/mL. Proliferation assay of MC3T3-E1 cells demonstrated that TPS-Co has the best cell proliferation effect at a cobalt concentration of 2 ppm. Therefore, TPS-Co may have potential applications in bone regeneration.

Fabrication and Characterization of Chicken- and Bovine-Derived Chondroitin Sulfate/Sodium Alginate Hybrid Hydrogels

The physicochemical properties and microstructure of hybrid hydrogels prepared using sodium alginate (SA) and chondroitin sulfate (CS) extracted from two animal sources were investigated. SA-based hybrid hydrogels were prepared by mixing chicken- and bovine-derived CS (CCS and BCS, respectively) with SA at 1/3 and 2/3 (w/w) ratios. The results indicated that the evaporation water loss rate of the hybrid hydrogels increased significantly upon the addition of CS, whereas CCS/SA (2/3) easily absorbed moisture from the environment. The thermal stability of the BCS/SA (1/3) hybrid hydrogel was higher than that of CCS/SA (1/3) hybrid hydrogel, whereas the hardness and adhesiveness of the CCS/SA (1/3) hybrid hydrogel were lower and higher, respectively, than those of the BCS/SA (1/3) hybrid hydrogel. Low-field nuclear magnetic resonance experiments demonstrated that the immobilized water content of the CCS/SA (1/3) hybrid hydrogel was higher than that of the BCS/SA (1/3) hybrid hydrogel. FTIR showed that S=O characteristic absorption peak intensity of BCS/SA (2/3) was obviously higher, suggesting that BCS possessed more sulfuric acid groups than CCS. SEM showed that the hybrid hydrogels containing CCS have more compact porous microstructure and better interfacial compatibility compared to BCS.

Click-Chemistry Cross-Linking of Hyaluronan Graft Copolymers

An easy and viable crosslinking procedure by click-chemistry (click-crosslinking) of hyaluronic acid (HA) was developed. In particular, the clickable propargyl groups of hyaluronane-based HA-FA-Pg graft copolymers showing low and medium molecular weight values were exploited in crosslinking by click-chemistry by using a hexa(ethylene glycol) spacer. The resulting HA-FA-HEG-CL materials showed an apparent lack of in vitro cytotoxic effects, tuneable water affinity, and rheological properties according to the crosslinking degree that suggests their applicability in different biomedical fields.

Crosslinkers for polysaccharides and proteins: Synthesis conditions, mechanisms, and crosslinking efficiency, a review

Polysaccharides and proteins are important macromolecules for developing hydrogels devoted to biomedical applications. Chemical hydrogels offer chemical, mechanical, and dimensional stability than physical hydrogels due to the chemical bonds among the chains mediated by crosslinkers. There are many crosslinkers to synthesize polysaccharides and proteins based on hydrogels. In this review, we revisited the crosslinking reaction mechanisms between synthetic or natural crosslinkers and polysaccharides or proteins. The selected synthetic crosslinkers were glutaraldehyde, carbodiimide, boric acid, sodium trimetaphosphate, N,N'-methylene bisacrylamide, and polycarboxylic acid, whereas the selected natural crosslinkers included transglutaminase, tyrosinase, horseradish peroxidase, laccase, sortase A, genipin, vanillin, tannic acid, and phytic acid. No less important are the reactions involving click chemistry and the macromolecular crosslinkers for polysaccharides and proteins. Literature examples of polysaccharides or proteins crosslinked by the different strategies were presented along with the corresponding highlights. The general mechanism involved in chemical crosslinking mediated by gamma and UV radiation was discussed, with particular attention to materials commonly used in digital light processing. The evaluation of crosslinking efficiency by gravimetric measurements, rheology, and spectroscopic techniques was presented. Finally, we presented the challenges and opportunities to create safe chemical hydrogels for biomedical applications.

Sodium hyaluronate-g-2-((N-(6-aminohexyl)-4-methoxyphenyl)sulfonamido)-N-hydroxyacetamide with enhanced affinity towards MMP12 catalytic domain to be used as visco-supplement with increased degradation resistance

The present paper describes the functionalization of sodium hyaluronate (NaHA) with a small molecule (2-((N-(6-aminohexyl)-4-methoxyphenyl)sulfonamido)-N-hydroxyacetamide) (MMPI) having proven inhibitory activity against membrane metalloproteins involved in inflammatory processes (i.e. MMP12). The obtained derivative (HA-MMPI) demonstrated an increased resistance to the in-vitro degradation by hyaluronidase, viscoelastic properties close to those of healthy human synovial fluid, cytocompatibility towards human chondrocytes and nanomolar affinity towards MMP 12. Thus, HA-MMPI can be considered a good candidate as viscosupplement in the treatment of knee osteoarticular disease.

Water content quantification by FTIR in carboxymethyl cellulose food additive

Water content quantification of raw polysaccharide materials for food processing is generally performed by gravimetric analysis or titrimetric methods, which are time- and energy-consuming, non-eco-friendly and sample destructive. The present study develops and validates a new approach, based on the use of Fourier transform infrared (FTIR) spectroscopy, resulting in a model of the water content of carboxymethyl cellulose (CMC) polysaccharides. Samples of CMC were exposed to different relative humidity conditions. Water content was determined by standard gravimetric methods (OIV-Oeno 404-2010) and compared with the area of FTIR absorption in the range 3675-2980 cm^-1, attributed to the stretching of OH groups. The strong correlation between gravimetric results and FTIR area (R² = 0.88) showed no signs of bias across the water content range. A cross-validation technique to predict the water content by band area was assessed obtaining a general equation: y = 2.12 x + 2.80 with a high repetitively and good prediction of the tested models.

Extraction and Characterization of Collagen from Elasmobranch Byproducts for Potential Biomaterial Use

With the worldwide increase of fisheries, fish wastes have had a similar increase, alternatively they can be seen as a source of novel substances for the improvement of society's wellbeing. Elasmobranchs are a subclass fished in high amounts, with some species being mainly bycatch. They possess an endoskeleton composed mainly by cartilage, from which chondroitin sulfate is currently obtained. Their use as a viable source for extraction of type II collagen has been hypothesized with the envisaging of a biomedical application, namely in biomaterials production. In the present work, raw cartilage from shark (Prionace glauca) and ray (Zeachara chilensis and Bathyraja brachyurops) was obtained from a fish processing company and submitted to acidic and enzymatic extractions, to produce acid-soluble collagen (ASC) and pepsin-soluble collagen (PSC). From all the extractions, P. glauca PSC had the highest yield (3.5%), followed by ray ASC (0.92%), ray PSC (0.50%), and P. glauca ASC (0.15%). All the extracts showed similar properties, with the SDS-PAGE profiles being compatible with the presence of both type I and type II collagens. Moreover, the collagen extracts exhibited the competence to maintain their conformation at human basal temperature, presenting a denaturation temperature higher than 37 °C. Hydrogels were produced using P. glauca PSC combined with shark chondroitin sulfate, with the objective of mimicking the human cartilage extracellular matrix. These hydrogels were cohesive and structurally-stable at 37 °C, with rheological measurements exhibiting a conformation of an elastic solid when submitted to shear strain with a frequency up to 4 Hz. This work revealed a sustainable strategy for the valorization of fisheries' by-products, within the concept of a circular economy, consisting of the use of P. glauca, Z. chilensis, and B. brachyurops cartilage for the extraction of collagen, which would be further employed in the development of hydrogels as a proof of concept of its biotechnological potential, ultimately envisaging its use in marine biomaterials to regenerate damaged cartilaginous tissues.

Effects of alginate/chondroitin sulfate-based hydrogels on bone defects healing

Repairing bone defects remains challenging in orthopedics. Here, strontium (Sr) alginate hydrogels containing chondroitin sulfate (CS) were fabricated for enhancing bone defects repair. The effects of CS incorporation ratio on the morphology, structure, thermal stability, water uptake and mechanical performance of Sr-CS/alginate hydrogels were also evaluated. Increasing CS incorporation ratio, Sr-CS/alginate hydrogels exhibit decreasing mechanical properties and lower water retention capacity. In vitro results suggest that Sr-CS/alginate hydrogels with higher CS ratio facilitate the proliferation of osteoblasts. Additionally, the osteogenic genes expressions were investigated by real-time quantitative polymerase chain reaction (RT-qPCR). The results reveal that Sr-CS/alginate hydrogels should have positive effects on modulating the osteogenic factors. Moreover, by employing repair femoral cylindrical defects rabbit model, the efficiency of as-fabricated Sr-CS/alginate hydrogels in bone regeneration was evaluated. The animal study suggests that Sr-CS/alginate hydrogel could significantly facilitate bone defects repair and therefore should potentially be useful for osteochondral tissue engineering.

Enriched Gellan Gum hydrogel as visco-supplement

Viscosupplementation, i.e. intra-articular injection of hyaluronic acid derivatives, is considered as the most effective treatment for patients with mild to moderate osteoarthritis. Even if hyaluronic acid is still considered as the gold standard, research is now focusing on the development of new products with enhanced injectability and yet reasonable viscoelastic behavior for OA treatment. A Gellan Gum (GG) hydrogel was synthesized and coated with crosslinked polyvinyl alcohol (PVA) to protect the polysaccharide from degradation during sterilization and improve its performance for the foreseen application. Thermal analyses indicated that mixed hydrogel showed a higher degree of structuring than the bare polysaccharide core without losing its swelling properties, thanks to the hydrophylicity of both coating and cross-linking agent. The PVA coating increased elastic and viscous moduli of the polysaccharide core conferring it a higher resistance to shear and compression and better thixotropic properties. Despite the double crosslinking, hydrogel was injectable. Cytocompatibility towards chondrocytes was verified.

Biodegradable, anti-adhesive and tough polyurethane hydrogels crosslinked by triol crosslinkers

The mechanical and biodegradable properties of hydrogels are two essential properties for practical biomaterial applications. In this work, a series of biodegradable polyurethane (PU) hydrogels were successfully synthesized using two kinds of triol crosslinkers with different chain structures. One crosslinker is normal glycerol (GC) with short chain length, and the other is biodegradable poly (ε-caprolactone)-triol (CAPA) with long chain length. All PU hydrogels showed considerable water uptake around ~60%, excellent strength (above 3 MPa), advisable modulus (0.9~1.7 MPa), high elasticity (above 700%), as well as good biodegradability and biocompatibility. Hydrogen bonds served as reversible sacrificial bonds in the PU hydrogels endow them good toughness with partial hysteresis during deformation. The biodegradable long chain crosslinker CAPA can certainly accelerate the degradation of PU hydrogels compared with the GC crosslinked hydrogels. The degradation of these hydrogels was a process of continuous erosion from the surface to interior, which contributes to the high remain of mechanical properties after 30 days-degradation. Besides, the hydrogels also show excellent antifouling ability of protein and anti-adhesion of cells. Therefore, these hydrogels suggest great potential used as biological anti-adhesive membranes or catheters.

Distribution of Gadolinium in Rat Heart Studied by Fast Field Cycling Relaxometry and Imaging SIMS

Research on microcirculatory alterations in human heart disease is essential to understand the genesis of myocardial contractile dysfunction and its evolution towards heart failure. The use of contrast agents in magnetic resonance imaging is an important tool in medical diagnostics related to this dysfunction. Contrast agents significantly improve the imaging by enhancing the nuclear magnetic relaxation rates of water protons in the tissues where they are distributed. Gadolinium complexes are widely employed in clinical practice due to their high magnetic moment and relatively long electronic relaxation time. In this study, the behavior of gadolinium ion as a contrast agent was investigated by two complementary methods, relaxometry and secondary ion mass spectrometry. The study examined the distribution of blood flow within the microvascular network in ex vivo Langendorff isolated rat heart models, perfused with Omniscan® contrast agent. The combined use of secondary ion mass spectrometry and relaxometry allowed for both a qualitative mapping of agent distribution as well as the quantification of gadolinium ion concentration and persistence. This combination of a chemical mapping and temporal analysis of the molar concentration of gadolinium ion in heart tissue allows for new insights on the biomolecular mechanisms underlying the microcirculatory alterations in heart disease.

Thixotropic PVA hydrogel enclosing a hydrophilic PVP core as nucleus pulposus substitute

A thixotropic polyvinyl alcohol (PVA) hydrogel, containing a hydrophilic poly-vinyl pyrrolidone (PVP) core, was obtained in order to develop a preformed 3D network able to maintain injectability. PVA was mixed with PVP in two different molar ratios (1:1 and 1:3) and chemically cross-linked using trisodium trimetaphosphate (STMP), which is able to react only with PVA component. A combination of Time of Flight- Secondary Ion Mass Spectrometry (ToF-SIMS), elemental analysis and UV spectroscopy permitted to determine both the cross-linking arm length and the crosslinking degree. Hydrogels were characterized in terms of swelling pressurization, rheological and mechanical behaviour. In particular, the viscoelastic behaviour of the hydrogel was analysed in shear and compression stress under dynamic conditions and compared with the performance of healthy human nucleus pulposus. In conclusion, the study demonstrated that the scaffold obtained mixing PVA and PVP in a molar ratio 1:1 can be considered a promising material to be utilised in the replacement of nucleus pulposus.

Alginate-gelatin formulation to modify lovastatin release profile from red yeast rice for hypercholesterolemia therapy

AIM

The preparation of a delivery system able to guarantee a delayed release of lovastatin from red yeast rice (RYR) is mandatory to counteract cholesterol biosynthesis effectively.

MATERIALS & METHODS

Polymeric formulations were prepared mixing alginate and gelatin, in different ratios, with RYR. The effect of different composition on stiffness, viscosity, swelling behavior and mesostructure of matrices was analyzed.

RESULTS

Formulations obtained combining polymers in comparable amount (i.e., 60/40 and 50/50) guaranteed a delayed release of lovastatin from RYR, a prolonged inhibitory activity toward 3-hydroxy-3-methylglutaryl-coenzyme A reductase and a decreased cholesterol synthesis.

CONCLUSION

The formulation obtained combining 60% gelatin and 40% of alginate showed physicochemical properties suitable to lead a lovastatin release profile compatible with cholesterol biosynthesis.

Efficacy of collagen and alginate hydrogels for the prevention of rat chondrocyte dedifferentiation

Dedifferentiation of chondrocytes remains a major problem in cartilage tissue engineering. The development of hydrogels that can preserve chondrogenic phenotype and prevent chondrocyte dedifferentiation is a meaningful strategy to solve dedifferentiation problem of chondrocytes. In the present study, three gels were prepared (alginate gel (Alg gel), type I collagen gel (Col gel), and their combination gel (Alg/Col gel)), and the in vitro efficacy of chondrocytes culture while preserving their phenotypes was investigated. While Col gel became substantially contracted with time, the cells encapsulated in Alg gel preserved the shape over the culture period of 14 days. The mechanical and cell-associated contraction behaviors of Alg/Col gel were similar to those of Alg. The cells in Alg and Alg/Col gels exhibited round morphology, whereas those in Col gel became elongated (i.e. fibroblast-like) during cultures. The cells proliferated with time in all gels with the highest proliferation being attained in Col gel. The expression of chondrogenic genes, including SOX9, type II collagen, and aggrecan, was significantly up-regulated in Alg/Col gel and Col gel, particularly in Col gel. However, the chondrocyte dedifferentiation markers, type I collagen and alkaline phosphatase (ALP), were also expressed at significant levels in Col gel, which being contrasted with the events in Alg and Alg/Col gels. The current results suggest the cells cultured in hydrogels can express chondrocyte dedifferentiation markers as well as chondrocyte markers, which draws attention to choose proper hydrogels for chondrocyte-based cartilage tissue engineering.

Hydrogels for Cartilage Regeneration, from Polysaccharides to Hybrids

The aims of this paper are: (1) to review the current state of the art in the field of cartilage substitution and regeneration; (2) to examine the patented biomaterials being used in preclinical and clinical stages; (3) to explore the potential of polymeric hydrogels for these applications and the reasons that hinder their clinical success. The studies about hydrogels used as potential biomaterials selected for this review are divided into the two major trends in tissue engineering: (1) the use of cell-free biomaterials; and (2) the use of cell seeded biomaterials. Preparation techniques and resulting hydrogel properties are also reviewed. More recent proposals, based on the combination of different polymers and the hybridization process to improve the properties of these materials, are also reviewed. The combination of elements such as scaffolds (cellular solids), matrices (hydrogel-based), growth factors and mechanical stimuli is needed to optimize properties of the required materials in order to facilitate tissue formation, cartilage regeneration and final clinical application. Polymer combinations and hybrids are the most promising materials for this application. Hybrid scaffolds may maximize cell growth and local tissue integration by forming cartilage-like tissue with biomimetic features.

Continuous multilayered composite hydrogel as osteochondral substitute

Cartilage is a highly organized avascular soft tissue that assembles from nano-to macro-scale to produce a complex structural network. To mimic cartilage tissue, we developed a stable multilayered composite material, characterized by a tailored gradient of mechanical properties. The optimized procedure implies chemical crosslinking of each layer directly onto the previous one and ensures a drastic reduction of the material discontinuities and brittleness. The multilayered composite was characterized by infrared spectroscopy, differential scanning calorimetry, thermogravimetry, and scanning electron microscopy in order to compare its physico-chemical characteristics with those of cartilage tissue. The rheological behavior of the multilayered composite was similar to that of human cartilage. Finally its cytocompatibility toward chondrocytes and osteoblasts was evaluated.