Preparation of degradable chemically cross-linked polylactic acid films and its application on disposable straws

The semi-rigidity of the polylactic acid (PLA) molecular chain makes it brittle, poor impact resistance and barrier properties, which severely limits its practical applications. In this paper, a bio-based reactive plasticizer epoxy soybean oil (ESO) was used to improve the mechanical and barrier properties of maleic anhydride grafted polylactic acid (MAPLA) by the chemical reaction between the epoxy and anhydride group. Firstly, the optimum curing conditions were 93.5 °C, 100 °C, and 110.8 °C for 2 h. The effects of different mass fractions of ESO on the properties of MAPLA-ESO (ME) films were systematically investigated. It was found that when the content of ESO was 10 wt%, the tensile properties of the resulting ME films were the best, with a tensile strength of 35.2 MPa. And it had an elongation at break of 20.0 % and toughness of 5.4 MJ/m3, which increased to 690 % and 675 %, respectively, compared with pure MAPLA films. The chemically crosslinked ME films also displayed excellent water resistance, well degradation, low migration properties, and better performance than that of commercial paper straws and PLA straws, exhibiting great application potential as degradable disposable straws. Therefore, this work provides an effective way to develop high-performance, green, and degradable PLA films and products.

3D biodegradable shape changing composite scaffold with programmable porous structures for bone engineering

This study developed a biodegradable composite porous polyurethane scaffold based on polycaprolactone and polyethylene glycol by sequential in-situ foaming salt leaching and freeze-drying process with responsive shape changing performance. Biomineral hydroxyapatite (HA) was introduced into the polyurethane matrix as inorganic fillers. Infrared spectroscopy results proved a successful synthesis, scanning electron microscopy showed that the scaffold’s porosity decreased with the addition of HA while the average pore size increased. X-ray diffraction and differential scanning calorimetry showed that the addition of HA lowered the melting point of the scaffold, resulting in a transition temperature close to the human body temperature. From the bending experiments, it could be demonstrated that PUHA20 has excellent shape memory performance with shape fixity ratio >98.9% and shape recovery ratio >96.2%. Interestingly, the shape-changing capacity could be influenced by the porous structures with variation of HA content. The shape recovery speed was further accelerated when the material was immersed in phosphate buffered saline at 37 °C. Additionally, in vitro mineralization experiments showed that the scaffold incorporating HA had good osteoconductivity, and implantation assessment proved that scaffolds had good in vivo biocompatibility. This scaffold is a promising candidate for implantation of bone defects.

Clay-Based Polymer Nanocomposites: Essential Work of Fracture

This work details the general structure of the clays used as a reinforcement phase in polymer nanocomposites. Clays are formed by the molecular arrangement of atomic planes described through diagrams to improve their visualization. The molecular knowledge of clays can facilitate the selection of the polymer matrix and achieve a suitable process to obtain clay-based polymer nanocomposite systems. This work highlights the development of polymer nanocomposites using the melt intercalation method. The essential work of fracture (EWF) technique has been used to characterize the fracture behavior of materials that show ductility and where complete yielding of the ligament region occurs before the crack propagation. In this sense, the EWF technique characterizes the post-yielding fracture mechanics, determining two parameters: the specific essential work of fracture (we), related to the surface where the actual fracture process occurs, and the specific non-essential work of fracture (wp), related to the plastic work carried out in the outer zone of the fracture zone. The EWF technique has been used successfully in nano-reinforced polymers to study the influence of different variables on fracture behavior. In this work, the fundamentals of the EWF technique are described, and some examples of its application are compiled, presenting a summary of the most relevant contributions in recent years.