Thermal and mechanical properties of electrospun PMMA, PVC, Nylon 6, and Nylon 6,6

Mechanically Robust and Electrically Stable High-Performance Triboelectric Nanogenerator Based on Fluffy-Free EC/Nylon-11 and PTFE/PVDF Nanofibers

Electrospun nanofiber (NF)-based triboelectric nanogenerators (TENGs) have attracted significant attention in recent years due to their high specific surface area, flexibility, and facile fabrication. However, these TENGs' triboelectric (TE) layers composed of electrospun NFs fail easily due to the poor mechanical properties and fluffy characteristics of the NFs. Herein, electropositive and electronegative TE layers based on ethylcellulose-coated nylon-11 (EC/nylon-11) NFs and polytetrafluoroethylene-coated poly(vinylidene fluoride) (PTFE/PVDF) NFs are prepared via electrospinning and postcoating processes. The obtained EC/nylon-11 and PTFE/PVDF NFs are fluffy-free and exhibit 12.26 and 20.33-fold enhancements of Young's modulus compared with those of pure nylon-11 and PVDF NFs, respectively. The optimized TENG exhibits not only superior performance, including an open-circuit voltage (VOC) of 212 V, a short-circuit current (ISC) of 18.5 μA, and a maximum power density of 1.76 W/m2 but also excellent electrical durability for over 100,000 cycles. The TENG's capability is further demonstrated by continuously driving electronics for over 5 min and by being integrated into a self-powered sensor array of electric skin to detect different in vitro stimuli. This work provides an effective approach to obtaining mechanically robust and electrically stable NF-based high-performance TENGs, which may have potential applications in durable, wearable, and self-powered nanoelectronics.

Novel Core/Shell Nylon 6,6/La-TMA MOF Electrospun Nanocomposite Membrane and CO2 Capture Assessments of the Membrane and Pure La-TMA MOF

Membrane technology plays a vital, applicable, and essential role in human life and industry. The high adsorption capacity of membranes can be employed for capturing air pollutants and greenhouse gases. In this work, we tried to develop a shaped industrial form of a metal-organic framework as an adsorbent material with the ability to capture CO₂ in the laboratory phase. To do so, a core/shell Nylon 6,6/La-TMA MOF nanofiber composite membrane was synthesized. This organic/inorganic nanomembrane is a kind of nonwoven electrospun fiber that was prepared using the coaxial electrospinning approach. FE-SEM, surface area calculations, nitrogen adsorption/desorption, XRD grazing incidence on thin films, and histogram diagrams were applied to assess the quality of the membrane. This composite membrane as well as pure La-TMA MOF were assessed as CO₂ adsorbent materials. The CO₂ adsorption abilities of the core/shell Nylon 6,6/La-TMA MOF membrane and pure La-TMA MOF were as high as 0.219 and 0.277 mmol/g, respectively. As a result of preparing the nanocomposite membrane from microtubes of La-TMA MOF, the %A of the micro La-TMA MOF (% 43.060) increased to % 48.524 for Nylon 6,6/La-TMA MOF.

Preparation and Characterization of Nanofibrous Membranes Electro-Spun from Blended Poly(l-lactide-co-ε-caprolactone) and Recombinant Spider Silk Protein as Potential Skin Regeneration Scaffold

Biomaterial scaffolding serves as an important strategy in skin tissue engineering. In this research, recombinant spider silk protein (RSSP) and poly(L-lactide-co-ε-caprolactone) (PLCL) were blended in different ratios to fabricate nanofibrous membranes as potential skin regeneration scaffolds with an electro-spinning process. Scanning electron microscopy (SEM), water contact angles measurement, Fourier transform infrared (FTIR) spectroscopy, wide angle X-ray diffraction (WAXD), tensile mechanical tests and thermo-gravimetric analysis (TGA) were carried out to characterize the nanofibrous membranes. The results showed that the blending of RSSP greatly decreased the nanofibers' average diameter, enhanced the hydrophilicity, changed the microstructure and thermal properties, and could enable tailored mechanical properties of the nanofibrous membranes. Among the blended membranes, the PLCL/RSSP (75/25) membrane was chosen for further investigation on biocompatibility. The results of hemolysis assays and for proliferation of human foreskin fibroblast cells (hFFCs) confirmed the membranes potential use as skin-regeneration scaffolds. Subsequent culture of mouse embryonic fibroblast cells (NIH-3T3) demonstrated the feasibility of the blended membranes as a human epidermal growth factor (hEGF) delivery matrix. The PLCL/RSSP (75/25) membrane possessed good properties comparable to those of human skin with high biocompatibility and the ability of hEGF delivery. Further studies can be carried out on such membranes with chemical or genetic modifications to make better scaffolds for skin regeneration.

Fabrication of electrospun polyamide–weathered basalt nano-composite as a non-conventional membrane for basic and acid dye removal

Abstract

In this study, an adsorptive electrospun polyamide membrane (ESPA) and electrospun polyamide–weathered basalt composite membrane (ESPA-WB) were prepared by an electrospinning process at room temperature. Hence, the WB structure was built as a polymeric membrane separation film in combination with the ESPA matrix as a composite nano-filtration membrane. Then, the ESPA and ESPA-WB membranes were characterized using BET surface area analysis, Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy (SEM). To avoid cracks forming during the sintering process, the WB should be added in certain percentages. The microstructures of the prepared membranes were investigated to evaluate their efficiency for basic and acidic dyesʼ removal and their permeation flux. Compared with the ESPA, the ESPA-WB membrane combines the characteristics of WB and ESPA, which greatly enhances the performance of both methylene blue (MB) and methyl orange (MO) dyes removal from synthetic wastewater. The outcomes of this study indicated that the dye uptake in the case of ESPA-WB is higher than that of ESPA, and it decreases with an increase in dye concentrations. The obtained membrane ESPA-WB showed both an excellent anti-dye fouling and a good rejection property for both dyes (i.e. 90% rejection for MB and 74% for MO) with no sign of contamination by the applied dyes. It was found that the structure of the ESPA-WB membrane contains a large number of several adsorption sites which leads to an increase in the removal rate of dyes. Hence, this study demonstrated a non-conventional strategy to prepare an effective adsorptive nano-composite membrane that can be applied as a highly recyclable one for the removal of organic dyes.

Graphic abstract

Tissue engineered scaffolds for corneal endothelial regeneration: a material's perspective

Currently, the treatment of corneal diseases caused by damage to the corneal endothelium requires a donor cornea. Because of their limited availability (1 donor cornea for 70 patients in need), researchers are investigating alternative approaches that are independent of donor tissue. One of them includes the development of a tissue engineered scaffold onto which corneal endothelial cells are seeded. In order to function as a suitable substrate, some of its essential properties including thickness, permeability, transparency and mechanical strength should meet certain demands. Additionally, the membrane should be biocompatible and allow the formation of a functional endothelium on the surface. Many materials have already been investigated in this regard including natural, semi-synthetic and synthetic polymers. In the current review, we present an overview of their characteristics and provide a critical view on the methods exploited for material characterization. Next, also the suitability of scaffolds to serve their purpose is discussed along with an overview of natural tissues (e.g. amniotic membrane and lens capsule) previously investigated for this application. Eventually, we propose a consistent approach to be exploited ideally for membrane characterization in future research. This will allow a scientifically sound comparison of materials and membranes investigated by different research groups, hence benefitting research towards the creation of a suitable/optimal tissue engineered endothelial graft.

A flexible and salt-rejecting electrospun film-based solar evaporator for economic, stable and efficient solar desalination and wastewater treatment

Recently, interfacial solar evaporation has been developed for water treatment. However, the high cost and low stability of solar evaporators significantly hinder their practical applications. In this study, layered graphene and polymethylmethacrylate were used to fabricate a composited film (GF) by electrospinning, which acted as a solar absorber. Together with a water transporter (polyurethane sponge) and a thermal insulator (polystyrene foam), the GF-based evaporator was constructed for solar distillation. Taking advantage of the porous three-dimensional structure of GF, the light path could be extended, rendering an efficient broadband solar absorption (92%). More importantly, although the content of layered graphene in the GF-based evaporator (1.75 g m^-2) was only 5.8-17.5% of that in the current reported graphene-based evaporators (10-30 g m^-2), a comparable water evaporation efficiency was acquired, which was induced by the much higher utilization efficiency of photothermal nanomaterials in the GF-based evaporator than that in the reported devices, ensuring its economic feasibility. Meanwhile, more than 99.9% heavy metal ions and 99.8% organic dye could be removed by the GF-based evaporator. Combining the merits of long-term and stable evaporation, salt rejection, and resistance to harsh environment, the GF-based evaporator was promising for freshwater recycling from both seawater and wastewater.

A Review on Electrospun PVC Nanofibers: Fabrication, Properties, and Application

Polyvinyl chloride (PVC) is a widely used polymer, not only in industry, but also in our daily life. PVC is a material that can be applied in many different fields, such as building and construction, health care, and electronics. In recent decades, the success of electrospinning technology to fabricate nanofibers has expanded the applicability of polymers. PVC nanofibers have been successfully manufactured by electrospinning. By changing the initial electrospinning parameters, it is possible to obtain PVC nanofibers with diameters ranging from a few hundreds of nanometers to several micrometers. PVC nanofibers have many advantages, such as high porosity, high mechanical strength, large surface area, waterproof, and no toxicity. PVC nanofibers have been found to be very useful in many fields with a wide variety of applications such as air filtration systems, water treatment, oil spill treatment, batteries technology, protective clothing, corrosion resistance, and many others. This paper reviews the fabricating method, properties, applications, and prospects of PVC nanofibers.

Slippery Liquid-Infused Porous Polymeric Surfaces Based on Natural Oil with Antimicrobial Effect

Many polymer materials have found a wide variety of applications in biomedical industries due to their excellent mechanical properties. However, the infections associated with the biofilm formation represent serious problems resulting from the initial bacterial attachment on the polymeric surface. The development of novel slippery liquid-infused porous surfaces (SLIPSs) represents promising method for the biofilm formation prevention. These surfaces are characterized by specific microstructural roughness able to hold lubricants inside. The lubricants create a slippery layer for the repellence of various liquids, such as water and blood. In this study, effective antimicrobial modifications of polyethylene (PE) and polyurethane (PU), as commonly used medical polymers, were investigated. For this purpose, low-temperature plasma treatment was used initially for activation of the polymeric surface, thereby enhancing surface and adhesion properties. Subsequently, preparation of porous microstructures was achieved by electrospinning technique using polydimethylsiloxane (PDMS) in combination with polyamide (PA). Finally, natural black seed oil (BSO) infiltrated the produced fiber mats acting as a lubricating layer. The optimized fiber mats' production was achieved using PDMS/PA mixture at ratio 1:1:20 (g/g/mL) using isopropyl alcohol as solvent. The surface properties of produced slippery surfaces were analyzed by various microscopic and optics techniques to obtain information about wettability, sliding behavior and surface morphology/topography. The modified PE and PU substrates demonstrated slippery behavior of an impinged water droplet at a small tilting angle. Moreover, the antimicrobial effects of the produced SLIPs using black seed oil were proven against Gram-positive Staphylococcus aureus (S. aureus) and Gram-negative Escherichia coli (E. coli).

The Mechanical Properties of PVC Nanofiber Mats Obtained by Electrospinning

This paper investigates the mechanical properties of oriented polyvinyl chloride (PVC) nanofiber mats, which, were obtained by electrospinning a PVC solution. PVC was dissolved in a solvent mixture of tetrahydrofuran/dimethylformamide. Electrospinning parameters used in our work were, voltage 20 kV; flow rate 0.5 mL/h; the distance between the syringe tip and collector was 15 cm. The rotating speed of the drum collector was varied from 500 to 2500 rpm with a range of 500 rpm. Nanofiber mats were characterized by scanning electron microscope, thermogravimetric analysis, differential scanning calorimetry methods. The mechanical properties of PVC nanofiber mats, such as tensile strength, Young’s modulus, thermal degradation, and glass transition temperature were also analyzed. It was shown that, by increasing the collector’s rotation speed from 0 (flat plate collector) to 2500 rpm (drum collector), the average diameter of PVC nanofibers decreased from 313 ± 52 to 229 ± 47 nm. At the same time, it was observed that the mechanical properties of the resulting nanofiber mats were improved: tensile strength increased from 2.2 ± 0.2 MPa to 9.1 ± 0.3 MPa, Young’s modulus from 53 ± 14 to 308 ± 19 MPa. Thermogravimetric analysis measurements showed that there was no difference in the process of thermal degradation of nanofiber mats and PVC powders. On the other hand, the glass transition temperature of nanofiber mats and powders did show different values, such values were 77.5 °C and 83.2 °C, respectively.

The Role of Electrical Polarity in Electrospinning and on the Mechanical and Structural Properties of As-Spun Fibers

Electric field strength and polarity in electrospinning processes and their effect on process dynamics and the physical properties of as-spun fibers is studied. Using a solution of the neutral polymer such as poly(methyl methacrylate) (PMMA) we explored the electrospun jet motion issued from a Taylor cone. We focused on the straight jet section up to the incipient stage of the bending instability and on the radius of the disk of the fibers deposited on the collecting electrode. A new correlation formula using dimensionless parameters was found, characterizing the effect of the electric field on the length of the straight jet, L˜E~E˜0.55. This correlation was found to be valid when the spinneret was either negatively or positively charged and the electrode grounded. The fiber deposition radius was found to be independent of the electric field strength and polarity. When the spinneret was negatively charged, L˜E was longer, the as-spun fibers were wider. The positively charged setup resulted in fibers with enhanced mechanical properties and higher crystallinity. This work demonstrates that often-overlooked electrical polarity and field strength parameters influence the dynamics of fiber electrospinning, which is crucial for designing polymer fiber properties and optimizing their collection.

Noncovalent Aqua Materials Based on Perylene Diimides

Most robust functional organic materials are currently based on polymers. These materials exhibit high stability, but once formed they are difficult to modify, adapt to their environment, and recycle. Materials based on small molecules that are held together by noncovalent interactions can offer an alternative to conventional polymer materials for applications that require adaptive and stimuli-responsive features. However, it is challenging to engineer macroscopic noncovalent materials that are sufficiently robust for practical applications. This Account summarizes progress made by our group towards the development of noncovalent "aqua materials" based on well-defined organic molecules. These materials are uniquely assembled in aqueous media, where they harness the strength of hydrophobic and π-π interactions between large aromatic groups to achieve robustness. Despite their high stability, these supramolecular systems can dynamically respond to external stimuli. We discuss design principles, fundamental properties, and applications of two classes of aqua materials: (1) supramolecular gels and (2) nanocrystalline arrays. The materials were characterized by a combination of steady-state and time-resolved spectroscopic techniques, electrical measurements, molecular modeling, and high-resolution microscopic imaging, in particular cryogenic transmission electron microscopy (cryo-TEM) and cryogenic scanning electron microscopy (cryo-SEM). All investigated aqua materials are based on one key building block, perylene diimide (PDI). PDI exhibits remarkably stable intermolecular bonds, together with useful chemical and optoelectronic properties. PDI-based amphiphiles carrying poly(ethylene glycol) (PEG) were designed to form linear supramolecular polymers in aqueous media. These one-dimensional arrays of noncovalently linked molecules can entangle and form three-dimensional supramolecular networks, leading to soft gel-like materials. Tuning the strength of interactions between fibers enables dynamic adjustment of viscoelastic properties and functional characteristics. Besides supramolecular gels, we show that simple PDI-based molecules can self-assemble in aqueous medium to form robust organic nanocrystals (ONCs). The mechanical and optoelectronic properties of ONCs are distinctly different from gel-phase materials. ONCs are excellent building blocks for macroscopic free-standing materials that can be used in dry state, unlike hydrogels. Being constructed from small molecules, ONC materials are easy to fabricate and recycle. High thermal robustness, good mechanical properties, and modular design render ONC materials versatile and suitable for a variety of applications. In the future, noncovalent aqua materials can become a sustainable alternative to conventional polymer materials. Examples from our research include stimuli-responsive and recyclable filtration membranes for preparative nanoparticle separation, water purification and catalysis, light-harvesting hydrogels for solar energy conversion, and nanocrystalline films for switchable surface coatings and electronic devices.

BODIPY-embedded electrospun materials in antimicrobial photodynamic inactivation

Drug-resistant pathogens, particularly those that result in hospital acquired infections (HAIs), have emerged as a critical priority for the World Health Organization. To address the need for self-disinfecting materials to counter the threat posed by the transmission of these pathogens from surfaces to new hosts, here we investigated if a cationic BODIPY photosensitizer, embedded via electrospinning into nylon and polyacrylonitrile (PAN) nanofibers, was capable of inactivating both bacteria and viruses via antimicrobial photodynamic inactivation (aPDI). Materials characterization, including fiber morphology and the degree of photosensitizer loading, was assessed by scanning electron microscopy (SEM), thermal gravimetric analysis (TGA), and UV-visible diffuse reflectance spectroscopy (UV-Vis DRS), and demonstrated that the materials were comprised of nanofibers (125-215 nm avg. diameter) that were thermostable to >300 °C. The antimicrobial potencies of the resultant Nylon-BODIPY⁽⁺⁾ and PAN-BODIPY⁽⁺⁾ nanofiber materials were evaluated against four strains of bacteria recognized by the World Health Organization as either critical or high priority pathogens: Gram-positive strains methicillin-resistant S. aureus (MRSA; ATCC BAA-44) and vancomycin-resistant E. faecium (VRE; ATCC BAA-2320), and Gram-negative strains multidrug-resistant A. baumannii (MDRAB; ATCC BAA-1605) and NDM-1 positive K. pneumoniae (KP; ATCC BAA-2146). Our results demonstrated the detection limit (99.9999%; 6 log units reduction in CFU mL^-1) photodynamic inactivation of three strains upon illumination (30-60 min; 40-65 ± 5 mW cm^-2; 400-700 nm): MRSA, VRE, and MDRAB, but only minimal inactivation (47-75%) of KP. Antiviral studies employing PAN-BODIPY⁽⁺⁾ against vesicular stomatitis virus (VSV), a model enveloped virus, revealed complete inactivation. Taken together, the results demonstrate the potential for electrospun BODIPY⁽⁺⁾-embedded nanofiber materials as the basis for pathogen-specific anti-infective materials, even at low photosensitizer loadings.

Sacrificial Core-Based Electrospinning: a Facile and Versatile Approach to Fabricate Devices for Potential Cell and Tissue Encapsulation Applications

Electrospinning uses an electric field to produce fine fibers of nano and micron scale diameters from polymer solutions. Despite innovation in jet initiation, jet path control and fiber collection, it is common to only fabricate planar and tubular-shaped electrospun products. For applications that encapsulate cells and tissues inside a porous container, it is useful to develop biocompatible hollow core-containing devices. To this end, by introducing a 3D-printed framework containing a sodium chloride pellet (sacrificial core) as the collector and through post-electrospinning dissolution of the sacrificial core, we demonstrate that hollow core containing polyamide 66 (nylon 66) devices can be easily fabricated for use as cell encapsulation systems. ATR-FTIR and TG/DTA studies were used to verify that the bulk properties of the electrospun device were not altered by contact with the salt pellet during fiber collection. Protein diffusion investigations demonstrated that the capsule allowed free diffusion of model biomolecules (insulin, albumin and Ig G). Cell encapsulation studies with model cell types (fibroblasts and lymphocytes) revealed that the capsule supports the viability of encapsulated cells inside the capsule whilst compartmentalizing immune cells outside of the capsule. Taken together, the use of a salt pellet as a sacrificial core within a 3D printed framework to support fiber collection, as well as the ability to easily remove this core using aqueous dissolution, results in a biocompatible device that can be tailored for use in cell and tissue encapsulation applications.

Obtenção de micro e nanofibras de PVC pela técnica de Fiação por Sopro em Solução

Neste trabalho, micro e nanofibras de PVC foram obtidas pela técnica de Fiação por Sopro em Solução, uma técnica recentemente desenvolvida capaz de produzir micro e nanoestruturas poliméricas com velocidade alta e preços que rivalizam a eletrofiação. As micro e nanofibras produzidas neste trabalho, a partir de soluções de PVC em tetrahidrofurano tiveram diâmetros médios entre 217 nm e 2,5 μm. Os efeitos das condições de processamento foram avaliados, sendo que a concentração da solução polimérica foi o parâmetro de maior influência no diâmetro médio. Também foi observado que a estabilidade térmica das micro e nanofibras não foi afetada pela técnica de fiação por sopro em solução.

Processing and characterization of electrospun trans-polyisoprene nanofibers

The method of manufacturing nanofibers using the electrospinning technique from trans-polyisoprene (TPI) is presented in this study, possibly for the first time. The process parameters such as solution concentration, applied voltage, distance and feeding rate for electrospinning were investigated and optimized with respect to fiber morphology, as observed from scanning electron microscopy (SEM) photomicrographs. Smooth and uniform nanofibers were found to generate at the optimum conditions with 1% melt concentration, 15 kV of voltage, tip-to-collector distance (TCD) of 15 cm and injection rate 4 ml/h. The physicochemical properties of pure TPI and electrospun TPI fibers were characterized by differential scanning calorimetry (DSC) and Fourier transform infrared (FTIR) analysis. Both DSC and FTIR characterization results show predominant transformation of TPI crystalline structure from the β form to the α form upon electrospinning.

Structure-induced enhancement of thermal conductivities in electrospun polymer nanofibers

Polymers that are thermally insulating in bulk forms have been found to exhibit higher thermal conductivities when stretched under tension. This enhanced heat transport performance is believed to arise from the orientational alignment of the polymer chains induced by tensile stretching. In this work, a novel high-sensitivity micro-device platform was employed to determine the axial thermal conductivity of individual Nylon-11 polymer nanofibers fabricated by electrospinning and post-stretching. Their thermal conductivity showed a correlation with the crystalline morphology measured by high-resolution wide-angle X-ray scattering. The relationship between the nanofiber internal structures and thermal conductivities could provide insights into the understanding of phonon transport mechanisms in polymeric systems and also guide future development of the fabrication and control of polymer nanofibers with extraordinary thermal performance and other desired properties.

Immobilization of horseradish peroxidase on electrospun microfibrous membranes for biodegradation and adsorption of bisphenol A

Horseradish peroxidase (HRP) from roots of horseradish (Amoracia rusticana) was successfully immobilized on novel enzyme carriers, poly(methyl methacrylate-co-ethyl acrylate) (PMMA CEA) microfibrous membranes, and used for removal of bisphenol A from water. PMMA CEA fibrous membranes (PFM) with fiber diameters of 300-500 nm, were fabricated by electrospinning. HRP was covalently immobilized on the surface of microfibers previously activated by polyethylenimine and glutaraldehyde. HRP loading reached 285 mg/g, and enzyme activity was 70% of free HRP after immobilization. Both stabilities and reusability of HRP were greatly improved after immobilization. After six repeated runs, immobilized HRP retained about 50% of its initial activity. Immobilized HRP exhibited significantly higher removal efficiency for bisphenol A (BPA) in 3h (93%) compared with free HRP (61%) and PFM alone (42%). The high BPA removal can be resulted by improvement of catalytic activity of immobilized HPR with adsorption on modified PMMA CEA support.

Nitroxide-Functionalized Graphene Oxide from Graphite Oxide

A facile method for preparing functionalized graphene oxide single layers with nitroxide groups is reported herein. Highly oxidized graphite oxide (GO=90.6%) was obtained, slightly modifying an improved Hummer's method. Oxoammonium salts (OS) were investigated to introduce nitroxide groups to GO, resulting in a one-step functionalization and exfoliation. The mechanisms of functionalization/exfoliation are proposed, where the oxidation of aromatic alcohols to ketone groups, and the formation of alkoxyamine species are suggested. Two kinds of functionalized graphene oxide layers (GOFT1 and GOFT2) were obtained by controlling the amount of OS added. GOFT1 and GOFT2 exhibited a high interlayer spacing (d₀₀₀₁ = 1.12nm), which was determined by X-ray diffraction. The presence of new chemical bonds C-N (~9.5 %) and O-O (~4.3 %) from nitroxide attached onto graphene layers were observed by X-ray photoelectron spectroscopy. Single-layers of GOFT1 were observed by HRTEM, exhibiting amorphous and crystalline zones at a 50:50 ratio; in contrast, layers of GOFT2 exhibited a fully amorphous surface. Fingerprint of GOFT1 single layers was obtained by electron diffraction at several tilts. Finally, the potential use of these materials within Nylon 6 matrices was investigated, where an unusual simultaneous increase in tensile stress, tensile strain and Young's modulus was observed.

Upconversion polymeric nanofibers containing lanthanide-doped nanoparticles via electrospinning

Flexible and freestanding poly(methyl methacrylate) nanofibers containing the upconversion nanoparticles (UCNPs) of lanthanide-doped sodium yttrium fluoride have been successfully fabricated via an electrospinning process. The UCNPs in nanofibers commonly formed chain-like aggregates aligned along the fiber axes. The effect of the electrospinning process on the upconversion properties of the embedded UCNPs was explored by characterizing the time evolution of the upconversion emission following pulsed near-infrared excitation. Our study revealed that there is only a slight reduction of upconversion efficiency for the UCNPs in electrospun nanofibers, indicating that upconversion properties of the UCNPs are largely preserved in the nanofibrous films. The prepared upconversion nanocomposites (in the form of nanofibrous films) with controlled morphologies, structures, and properties could be useful for broad photonic applications.

Stress delocalization in crack tolerant electrospun nanofiber networks

The fracture toughness of a noncontinuum fibrous network produced by electrospinning polyamide 6 nanofibers is investigated. The mechanical properties of the nanofiber network is observed to be independent of various incorporated macroscopic crack lengths, resulting in an apparent increase in fracture toughness with increasing crack length as evaluated using conventional fracture mechanics. Strain mapping of the nanofiber network indicates stress delocalization mechanisms operating around these macroscopic cracks in the network. The deformation behavior of the nanofiber network will therefore depend on the volume of fibers being loaded in the network and not the number of fibers in the cross-sectional width defining continuum sample mechanics. These results indicate a propensity for both the synthetic electrospun nanofibrous network in this work and potentially other nanofibrous networks to resist failure from macroscopic cracks incorporated within the material.

Electro-active shape memory properties of poly(ε-caprolactone)/functionalized multiwalled carbon nanotube nanocomposite

One type of electroactive shape memory nanocomposite was fabricated, including cross-linked poly(ε-caprolactone) (cPCL) and conductive multiwalled carbon nanotubes (MWNTs). The cross-linking reaction of the pristine poly(ε-caprolactone) (PCL) was realized by using benzoyl peroxide (BPO) as an initiator. The raw MWNTs (Raw-M) were prefunctionalized by acid-oxidation process and covalent grafting with poly (ethylene glycol) (PEG), respectively. Three kinds of nanocomposites containing cPCL/Raw-M, cPCL/acid-oxidation MWNTs (AO-M) and cPCL/PEG grafted MWNTs (PEG-M) were obtained, and the mechanical, electrical and shape memory properties were further investigated. The influence of in vitro degradation on their shape memory and mechanical properties was also evaluated. The methyl thiazolyl tetrazolium (MTT) assay was performed to estimate their biocompatibility. The results displayed that these nanocomposites could perform favorable shape memory recovery both in hot water at 55 °C and in electric field with 50 V applied voltage. In addition, compared with cPCL/Raw-M and cPCL/AO-M, cPCL/PEG-M composite possessed more favorable properties such as mechanical, biocompatible, and electroactive shape memory functions. Therefore, the nanocomposite may be potential for application as smart bioactuators in biomedical field.

Microscopic and Spectroscopic Studies of Thermally Enhanced Electrospun PMMA Micro- and Nanofibers

Carbon nanofibers (CNFs) have been incorporated into poly(methyl methacrylate) (PMMA) through electrospinning. The resulting micro- and nanofibers have been characterized by Scanning Electron Microscopy (SEM), which confirmed fiber formation and demonstrated a core-sheath structure of the PMMA fibers. Thermogravimetric Analysis (TGA) was used to obtain the thermal properties of the materials, indicating an enhancement in the thermal properties of the composite fibers. In addition, Fourier Transform Infrared Spectroscopy (FTIR) was utilized to investigate the interactions of PMMA micro- and nanofibers with CNFs, demonstrating the preferred sites of intermolecular interactions between the polymer matrix and the filler.