Polymeric superabsorbing composite prepared using a glow-discharge electrolysis plasma for the removal of divalent heavy metal ions from aqueous solutions and its swelling properties

Effect of chain structures of monomer on hydroxyethyl cellulose-based superabsorbent properties and improvement of chickpeas plant growth of water deficit-stressed

The aim of this research was evaluation of the influence of distance between zwitterionic monomer ions on the performance of superabsorbents. For this purpose, two zwitterionic monomers 4-(3-aminopropyl) amino-4-oxo-2-butenoic acid (APOB) and 4-(6-aminohexyl) amino-4-oxo-2-butenoic acid (AHOB) were prepared and applied for synthesis of two new superabsorbents through graft copolymerization onto hydroxyethyl cellulose (HEC) in the presence of acrylic acid (AA). In synthesis of superabsorbents factors such as the highest water absorbency capacity, absorbency rate, gel strength, and environmental problems should be resolved or improved. The results demonstrated that the water absorbency capacity and rate parameters (τ) of HEC-g-p(AA-co-APOB) and HEC-g-p(AA-co-AHOB) in distilled water were 986.62, 664.38 g/g, and 98.04, 140.84 min, respectively. The biodegradability of HEC-g-p(AA-co-APOB) was approximately 4 times more than HEC-g-p(AA-co-AHOB). However, based on the rheological analyses (G'/G″) HEC-g-p(AA-co-AHOB) was stronger than the other. Additionally, studies of water retention on soil containing HEC-g-p(AA-co-AHOB) superabsorbent (soil with 0.25 wt% material) showed that the after 30 days has ≤5 % water while soil in the absence of superabsorbent after 10 days completely dried. Studies of the growth of plants in soil demonstrated in the presence of HEC-g-p(AA-co-AHOB) the average length of shoots was 36 cm while without superabsorbent were 25 cm.

Novel reusable hydrogel adsorbents for precious metal recycle

A novel polyethylene glycol diacrylate-allylthiourea (ATU-PEGDA) hydrogel was simply synthesized through photo-reaction. Modified thiourea simultaneously employed chelation and electrostatic force to selectively recycle Ag(I) and Pd(II) from electrolytic wastewater. Sorption efficiency was nearly 100% for Ag(I) and Pd(II), which occurred at initial pH of 1 within 300 min. The adsorption characteristics of ATU-PEGDA followed Langmuir isotherm model and the maximum adsorption capacity of Ag(I) and Pd(II) achieved 83.33 and 152.81 mg g-1 sorbent, respectively where Pseudo-first order model demonstrate the adsorption kinetics. In the presence of other heavy metals, ATU-PEGDA performed high selectivity, 0.89 and 1.31 towards Ag(I) and Pd(II). ATU-PEGDA can be completely regenerated within 120 min using 0.5 M thiourea-0.001 M HNO3 and 1 M thiourea-4 M HCl after the adsorption of Ag(I) and Pd(II), respectively. Thiourea-branched structure was created after regeneration, improving the adsorption capacity. Compared to initial hydrogel, the adsorption capacity of Ag(I) and Pd(II) increased 31.83 ± 3.08% and 75.12 ± 11.02%, respectively. Over 10 consecutive adsorption-desorption cycles, ATU-PEGDA performed 111.34 and 263.79 mg g-1 sorbent in adsorption capacity of Ag(I) and Pd(II). Chromism of ATU-PEGDA hydrogel was a benefit to determine adsorption saturation and completely desorption of Ag(I) and Pd(II). Potentially, ATU-PEGDA can be extended to industrial applications.

A review on grafting of hydroxyethylcellulose for versatile applications

Hydroxyethylcellulose (HEC) is a biocompatible, biodegradable, nontoxic, hydrophilic, non- ionic water soluble derivative of cellulose. It is broadly used in biomedical field, paint industry, as a soil amendment in agriculture, coal dewatering, cosmetics, absorbent pads, wastewater treatment and gel electrolyte membranes. Industrial uses of HEC can be extended by the its grafting with different polymers including poly acrylic acid, polyacrylamide, polylactic acid, polyethyleneglycol, polydimethyleamide, polycaprolactone, polylactic acid and dimethylamino ethylmethacrylate. This permits the formation of new biomaterials with improved properties and versatile applications. In this article, a comprehensive overview of graft copolymers of HEC with other polymers/compounds and their applications in drug delivery, stimuli sensitive hydrogels, super absorbents, personal hygiene products and coal dewatering is presented.

Simple and green technique for sequestration and concentration of silver nanoparticles by polysaccharides immobilized on glass beads in aqueous media

BACKGROUND

Engineered nanoparticles have unique properties compared to bulk materials and their commercial uses growing rapidly. They represent a potential risk for environment and health and could be eventually released in water. Silver nanoparticles (Ag NP) are applied in various products and are well-known for their antibacterial properties. Nowadays, pre-concentration and separation methods for Ag NP possess some limitations. Here, we present a simple, green method to sequestrate and concentrate Ag NP from different aqueous media.

RESULTS

Supported polysaccharides on glass beads synthesized in water by a single step reaction show high sequestration capacity of citrate-coated Ag NP in aqueous media. Supported polysaccharides were characterized by infrared spectroscopy, scanning electron microscopy (SEM) and elemental analysis. Sequestration of 83.0 % of Ag NP was attained from a 20 μg.L(-1) aqueous solution with supported chitosan in water whereas supported 2-hydroxyethylcellulose (HEC) reached 64.0 % in synthetic seawater in 2 h. The influence of polymer/glass beads ratio and molecular weight of polysaccharides was also studied. The effect of the salinity and humic acids on sequestration of Ag NP was investigated. Supported polymers have shown high performance for sequestration of ionic silver. Sequestration of 82.5 % and 80.8 % were obtained from a 60 μg.L(-1) silver ion (as nitrate salt) with supported HEC and chitosan, respectively. Sequestrated Ag NP was characterized with transmission electron microscopy (TEM) where images showed Ag NP with unchanged size and shape.

CONCLUSIONS

This sequestration method, involving green synthesis, allows efficient concentration and characterization of Ag NP from different aqueous media. This simple and fast method is a potential sustainable technique for elimination of Ag NP and ionic silver from waste waters and waters at different salinities.

Glow discharge electrolysis plasma initiated preparation of temperature/pH dual sensitivity reed hemicellulose-based hydrogels

The temperature/pH dual sensitivity reed hemicellulose-based hydrogels have been prepared through glow discharge electrolysis plasma (GDEP). The effect of different discharge voltages on the temperature and pH response performance of reed hemicellulose-based hydrogels was inspected, and the formation mechanism, deswelling behaviors of reed hemicellulose-based hydrogels were also discussed. At the same time, infrared spectroscopy (FT-IR), scanning differential thermal analysis (DSC) and scanning electron microscope (SEM) were adopted to characterize the structure, phase transformation behaviors and microstructure of hydrogels. It turned out to be that all reed hemicellulose-based hydrogels had a double sensitivity to temperature and pH, and their phase transition temperatures were all approximately 33 °C, as well as the deswelling dynamics met the first model. In addition, the hydrogel (TPRH-3), under discharge voltage 600 V, was more sensitive to temperature and pH and had higher deswelling ratio.

Glow discharge electrolysis plasma induced synthesis of cellulose-based ionic hydrogels and their multiple response behaviors

The cellulose-based hydrogel which was prepared through glow discharge electrolysis plasma showed excellent swelling performance and multiple response behaviors.

Recent progress in the application of glow-discharge electrolysis plasma

Non-equilibrium plasma makes it is possible to modify surface chemistry, synthetize polymer materials, and oxidize some organic compounds completely by generation of energetic and chemically active species in gas or liquid phases. Glow-discharge electrolysis plasma (GDEP) has been intensely studied for applications in chemistry and in material, environmental, and biomedical engineering during the last few years because of the very highly active chemical species produced during the glow-discharge electrolysis (GDE) process. A brief review is already available regarding applications of glow-discharge electrolysis plasma technique in chemistry and environmental science during the past decade. For convenience of discussion, some papers from prior years are also cited. The contents of this review are focused on the degradation of persistent pollutants, surface modification of materials, and preparation of functional polymers.