Polyamide/Carbon Nanoparticles Nanocomposites: A Review

Effect of Interfacial Compatibility on Mechanical Property of Polyamide 6 Modified by Polyborosiloxane

The interfacial properties of blends play a crucial role in determining the mechanical characteristics of polyamide alloys. This study focused on the preparation of PA6/PBS alloys via a melt blending method, utilizing 3-aminopropyltriethoxysilane (KH550) as the compatibilizer to examine the impact of KH550 on the interfacial and mechanical properties of these binary blends. The results demonstrated that the amino groups in KH550 reacted with the terminal carboxyl groups in polyamide 6 (PA6) and the B-OH in polyborosiloxane (PBS), which significantly enhanced interfacial adhesion between the two phases. A reduction in the particle size and interparticle distance of PBS particles was related to increased interfacial adhesion within the blends. The superior dispersion and robust interfacial adhesion caused a notable improvement in the notched Izod impact strength, rising from 7.9 kJ/m2 to 29.7 kJ/m2 at 25 °C and from 6.3 kJ/m2 to 16.6 kJ/m2 at -50 °C. Consequently, KH550 proved to be an effective toughening agent for the PA6/PBS system. Furthermore, the PA6/PBS blends containing a high content of KH550 induced a morphological transformation from a "sea-island" structure to a partially interpenetrating polymer network, leading to the absence of a double-yield phenomenon in the tensile curve.

Advances in Monte Carlo Method for Simulating the Electrical Percolation Behavior of Conductive Polymer Composites with a Carbon-Based Filling

Conductive polymer composites (CPCs) filled with carbon-based materials are widely used in the fields of antistatic, electromagnetic interference shielding, and wearable electronic devices. The conductivity of CPCs with a carbon-based filling is reflected by their electrical percolation behavior and is the focus of research in this field. Compared to experimental methods, Monte Carlo simulations can predict the conductivity and analyze the factors affecting the conductivity from a microscopic perspective, which greatly reduces the number of experiments and provides a basis for structural design of conductive polymers. This review focuses on Monte Carlo models of CPCs with a carbon-based filling. First, the theoretical basis of the model's construction is introduced, and a Monte Carlo simulation of the electrical percolation behaviors of spherical-, rod-, disk-, and hybridfilled polymers and the analysis of the factors influencing the electrical percolation behavior from a microscopic point of view are summarized. In addition, the paper summarizes the progress of polymer piezoresistive models and polymer foaming structure models that are more relevant to practical applications; finally, we discuss the shortcomings and future research trends of existing Monte Carlo models of CPCs with carbon-based fillings.

Synthesis of High-Value Bio-Based Polyamide 12,36 Microcellular Foams with Excellent Dimensional Stability and Shape Recovery Properties

The search for alternatives to petroleum-based thermoplastic polyamide elastomers (TPAEs) has recently drawn great interest. In this study, a bio-massed TPAE, PA12,36, was synthesized using 1,12-dodecanediamine (DDA) and fatty dimer acid (FDA, PripolTM1009) precursors via catalyst and solvent-free melt polycondensation. The molecular structure and molecular weight of the PA12,36 were characterized by 1H NMR, FTIR, and GPC. PA12,36 displayed a low melting temperature of 85.8 °C, an initial degradation temperature of 425 °C, and a glass-transition temperature of 30.4 °C, whereas it sustained satisfactory tensile strength (10.0 MPa) and superior strain at break (1378%). Furthermore, PA12,36 was foamed by supercritical CO2, and the cell size, cell density, and porosity were determined. The entangled long-chained FDA component generated a physically crosslinked network, which promoted the melt viscosity of PA12,36 against elongations of foam cell growth and increased foamability significantly. As a result, uniform structured cellular foams with a cell diameter of 15-24 µm and high cell density (1011 cells/cm3-1012 cells/cm3) were successfully achieved. The foaming window was widened from 76 to 81 °C, and the expansion ratio was increased from 4.8 to 9.6. Additionally, PA12,36 foam with a physically crosslinked structure presented a better creep shape recovery percentage (92-97.9%) and sturdier dimensional stability. This bio-based PA12,36 foam is a promising candidate to replace petroleum-based thermoplastic elastomer foams for engineering applications, particularly shoe soles.

Development and Characterization of High Environmentally Friendly Composites of Bio-Based Polyamide 1010 with Enhanced Fire Retardancy Properties by Expandable Graphite

Bio-based polyamide 1010 was melt-compounded with different percentages (2.5 to 10.0 wt.%) of expandable graphite (EGr) as an environmentally friendly solution to improve the flame retardancy properties. The mechanical, morphological, thermal and fire retardancy properties (among others) are analysed. The novelty of the article lies in the use of fully removable polyamide. The effect of the incorporation of EGr in the properties of this polymer was analysed and characterised. The incorporation of EGr into the PA1010 matrix led to very promising results. Mechanically, the EGr provided increased stiffness and a tensile strength up to 7.5 wt.%, verifying good mechanical performance. The DMTA results also show how the incorporation of EGr in the PA1010 matrix clearly increases the stiffness of the composites over the entire temperature range analysed. In terms of physical properties, water absorption of PA1010 was reduced particularly in the 10% EGr, which reduces the water absorption of PA1010 by 20%. In terms of flame retardant properties, with the incorporation of EGr, a significant reduction in the heat release rate (HRR) values as the concentration of the additive increases and a reduction in the maximum peak heat release rate (pHRR) can be observed for all compounds. In particular, it goes from 934 kW/m2 for neat polyamide to a value of 374 kW/m2 with 10% EGr. Finally, an improvement in the UL-94 rating of the 7.5 and 10% EGr composites was also observed, going from V-2 in the PA to V-1 in these composites.

Effect of Terminal Groups on Thermomechanical and Dielectric Properties of Silica-Epoxy Composite Modified by Hyperbranched Polyester

To study the effect of hyperbranched polyester with different kinds of terminal groups on the thermomechanical and dielectric properties of silica-epoxy resin composite, a molecular dynamics simulation method was utilized. Pure epoxy resin and four groups of silica-epoxy resin composites were established, where the silica surface was hydrogenated, grafted with silane coupling agents, and grafted with hyperbranched polyester with terminal carboxyl and terminal hydroxyl, respectively. Then the thermal conductivity, glass transition temperature, elastic modulus, dielectric constant, free volume fraction, mean square displacement, hydrogen bonds, and binding energy of the five models were calculated. The results showed that the hyperbranched polyester significantly improved the thermomechanical and dielectric properties of the silica-epoxy composites compared with other surface treatments, and the terminal groups had an obvious effect on the enhancement effect. Among them, epoxy composite modified by the hyperbranched polyester with terminal carboxy exhibited the best thermomechanical properties and lowest dielectric constant. Our analysis of the microstructure found that the two systems grafted with hyperbranched polyester had a smaller free volume fraction (FFV) and mean square displacement (MSD), and the larger number of hydrogen bonds and greater binding energy, indicating that weaker strength of molecular segments motion and stronger interfacial bonding between silica and epoxy resin matrix were the reasons for the enhancement of the thermomechanical and dielectric properties.

Micro-Structure and Thermomechanical Properties of Crosslinked Epoxy Composite Modified by Nano-SiO₂: A Molecular Dynamics Simulation

Establishing the relationship among the composition, structure and property of the associated materials at the molecular level is of great significance to the rational design of high-performance electrical insulating Epoxy Resin (EP) and its composites. In this paper, the molecular models of pure Diglycidyl Ether of Bisphenol A resin/Methyltetrahydrophthalic Anhydride (DGEBA/MTHPA) and their nanocomposites containing nano-SiO₂ with different particle sizes were constructed. The effects of nano-SiO₂ dopants and the crosslinked structure on the micro-structure and thermomechanical properties were investigated using molecular dynamics simulations. The results show that the increase of crosslinking density enhances the thermal and mechanical properties of pure EP and EP nanocomposites. In addition, doping nano-SiO₂ particles into EP can effectively improve the properties, as well, and the effectiveness is closely related to the particle size of nano-SiO₂. Moreover, the results indicate that the glass transition temperature (Tg) value increases with the decreasing particle size. Compared with pure EP, the Tg value of the 6.5 Å composite model increases by 6.68%. On the contrary, the variation of the Coefficient of Thermal Expansion (CTE) in the glassy state demonstrates the opposite trend compared with Tg. The CTE of the 10 Å composite model is the lowest, which is 7.70% less than that of pure EP. The mechanical properties first increase and then decrease with the decreasing particle size. Both the Young's modulus and shear modulus reach the maximum value at 7.6 Å, with noticeable increases by 12.60% and 8.72%, respectively compared to the pure EP. In addition, the thermal and mechanical properties are closely related to the Fraction of Free Volume (FFV) and Mean Squared Displacement (MSD). The crosslinking process and the nano-SiO₂ doping reduce the FFV and MSD value in the model, resulting in better thermal and mechanical properties.

Polymers and Related Composites via Anionic Ring-Opening Polymerization of Lactams: Recent Developments and Future Trends

This paper presents a comprehensive overview of polymers and related (nano)composites produced via anionic ring opening polymerization (AROP) of lactams. It was aimed at surveying and showing the important research and development results achieved in this field mostly over the last two decades. This review covers the chemical background of the AROP of lactams, their homopolymers, copolymers, and in situ produced blends. The composites produced by AROP were grouped into nanocomposites, discontinuous fiber, continuous fiber, textile fabric, and self-reinforced composites. The manufacturing techniques were introduced and the most recent developments highlighted. Based on this state-of-art survey some future trends were deduced and as their "driving forces" novel and improved manufacturing techniques identified.