The effect of ap-phenylen-bis-maleamic acid grafted atactic polypropylene interfacial agent on the dynamic-mechanical properties of iPP/Mica composites measured at the polymer transitions

Polymer Waste-Based Highly Efficient Maleated Interfacial Modifier in iPP/SCF Composites—Some Notes on the Role of Processing in Their Thermal and Dynamic Mechanical Properties

This work has a two-fold objective. First, it attempts to present the excellent efficiency of a maleated interfacial agent (obtained by the authors by using atactic polypropylene industrial waste) when used as interfacial additive in polypropylene/short carbon fiber composites (iPP/SCF). Second, in this paper, we pay attention to the role played by processing in the final properties of the composite. This work has been performed by considering the emerging crystalline morphologies generated by the different shear forces that the molten material suffers depending on the molding method employed. The interfacial agent analyzed here consists of an atactic polypropylene containing succinic anhydride grafts obtained through a chemical modification process performed in solution. It incorporates different types of succinic grafts, such as succinic bridges between aPP chains and backbone and terminal grafts (aPP-SASA) in its structure, and contains 5.6% (5.6 × 10−4 g/mol) of grafted polar groups in total. The adhesion of the polyamide SCF sizing and the succinic units is followed by Field Emission Scanning Electronic Microscopy (FESEM) and Synchrotron Infrared Microscopy (SIRM). However, the main objective of this work is the study of the thermal and the dynamic mechanical behavior of the materials of a series of both compression- and injection-molded samples to ascertain the enhanced interfacial interactions in the material and further comparison between the results obtained by both processing operations. Therefore, we detect improvements of 200% in stiffness and 400% in the viscous response of the same SCF content composites caused by aPP-SASA, depending on the processing method used.

The Variance of the Polypropylene α Relaxation Temperature in iPP/a-PP-pPBMA/Mica Composites

By considering that the α relaxation related to the glass to rubber transition (obtained by dynamic mechanical analysis) of isotactic polypropylene (iPP) can be identified with the thermal history of the material (and so, with the processing step), this work deals with the changes in this transition temperature (Tα) in polypropylene/mica composites caused by the mutual effect of the other components (mica and interfacial additive). Here, the additive used is a p-phenylen-bis-maleamic grafted atactic polypropylene (aPP-pPBMA) obtained from polymerization wastes (aPP) by the authors. This additive contains 5.0·10−4 g.mol−1 (15% w/w) grafted pPBMA. In essence, this article has two different objectives: (1) To observe and discuss the changes in Tα of the polymer matrix (iPP) caused by the combined effect of the other components (mica and aPP-pPBMA); and (2) predicting the values for Tα in terms of both aPP-pPBMA and mica content for whatever composition in the experimental space scanned. This task was undertaken by employing a Box–Wilson experimental design assuming the complex character of the interactions between the components of the iPP/aPP-pPBMA/mica system, which define the ultimate properties of the composite.

Collar E. On the Combined Effect of Both the Reinforcement and a Waste Based Interfacial Modifier on the Matrix Glass Transition in iPP/a-PP-pPBMA/Mica Composites

This work deals with the changes of the glass transition temperature (T_g) of the polymer in polypropylene/mica composites due to the combined and synergistic effect of the reinforcement and the interfacial modifier. In our case, we studied the effect on T_g of platy mica and an interfacial modifier with p-phenylen-bis-maleamic acid (pPBMA) grafted groups onto atactic polypropylene (aPP-pPBMA). This one contains 5.0 × 10^-4 g·mol^-1 (15% w/w) grafted pPBMA and was previously obtained by the author's labs by using industrial polymerization wastes (aPP). The objective of the article must be perceived as two-fold. On one hand, the determination of the changes in the glass transition temperature of the isotactic polypropylene phase (iPP) due to both the reinforcement and the agent as determined form the damp factor in DMA analysis. On the other hand, forecasting the variation of this parameter (T_g) as a function of both the interfacial agent and reinforcement content. For such purposes, and by assuming the complex character of the iPP/aPP-pPBMA/Mica system, wherein interaction between the components will define the final behaviour, a Box-Wilson experimental design considering the amount of mica particles and of interface agent as the independent variables, and the T_g as the dependent one, has been used. By taking in mind that the glass transition is a design threshold for the ultimate properties of parts based in this type of organic-inorganic hybrid materials, the final purpose of the work is the prediction and interpretation of the effect of both variables on this key parameter.