Understanding structural distortions in hybrid layered perovskites with the n = 1 Ruddlesden-Popper structure

A symmetry mode analysis yields 47 symmetrically distinct patterns of octahedral tilting in hybrid organic-inorganic layered perovskites that adopt the n = 1 Ruddlesden-Popper (RP) structure. The crystal structures of compounds belonging to this family are compared with the predictions of the symmetry analysis. Approximately 88% of the 140 unique structures have symmetries that agree with those expected based on octahedral tilting alone, while the remaining compounds have additional structural features that further lower the symmetry, such as asymmetric packing of bulky organic cations, distortions of metal-centered octahedra or a shift of the inorganic layers that deviates from the a/2 + b/2 shift associated with the RP structure. The structures of real compounds are heterogeneously distributed amongst the various tilt systems, with only 9 of the 47 tilt systems represented. No examples of in-phase ψ-tilts about the a and/or b axes of the undistorted parent structure were found, while at the other extreme ∼66% of the known structures possess a combination of out-of-phase φ-tilts about the a and/or b axes and θ-tilts (rotations) about the c axis. The latter combination leads to favorable hydrogen bonding interactions that accommodate the chemically inequivalent halide ions within the inorganic layers. In some compounds, primarily those that contain either Pb²⁺ or Sn²⁺, favorable hydrogen bonding interactions can also be achieved by distortions of the octahedra in combination with θ-tilts.

Functional materials design: octahedral tilts in hybrid n = 1 Ruddlesden-Popper phases

The exciting properties offered by hybrid perovskite-related materials have motivated Liu et al. [(2023). IUCrJ, 10, 385-396] to explore the crystallography of hybrid n = 1 Ruddlesden-Popper phases. Their investigation explores the structures (and symmetries) expected to result from typical distortions and gives design strategies to target specific symmetries.

Controllable Connection of Fe2Se3 Double Chains and Fe(dien)2 Complexes for Organic-Inorganic Hybrid Ferrimagnet with a Large Coercivity

Organic-inorganic hybrid materials built by inorganic and organic building units have attracted intensive interest in the past decades due to unique chemical and physical properties. However, rare organic-inorganic hybrid materials show excellent permanent magnetic properties. Here, we develop a facile chemical solution method to bottom-up synthesize a new hybrid (Fe₂Se₃)₂[Fe(dien)₂]_0.9. This hybrid phase with the space group P2₁/c (14) possesses a rodlike shape with a diameter of 100-2000 nm and a length of 5-50 µm. The hybrid rods are ferrimagnetic with a Curie temperature (T_C) of 11 K. They show a high coercivity (H_C) of 4.67 kOe and a saturation magnetization (M_S) of 13.5 emu/g at 2 K. Compared with orthorhombic (FeSe₂)₂Fe(dien)₂, the excellent magnetic performance of the hybrid rods is ascribed to the monoclinic hybrid structure built by Fe(dien)₂ complexes and Fe₂Se₃ double chains. Our study provides guidance for connecting inorganic fragments of FeSe₂ single chains, Fe₂Se₃ double chains or β-Fe₃Se₄ layers with Fe(dien)₂ complexes for organic-inorganic hybrid phases with varied crystal structures and magnetic properties.

Dexamethasone-Loaded Ureasil Hydrophobic Membrane for Bone Guided Regeneration

Physical barrier membranes have been used to release active substances to treat critical bone defects; however, hydrophilic membranes do not present a prolonged release capacity. In this sense, hydrophobic membranes have been tested. Thus, this study aimed to develop hydrophobic membranes based on mixtures of ureasil-polyether-type materials containing incorporated dexamethasone (DMA) for the application in guided bone regeneration. The physicochemical characterization and biological assays were carried out using small-angle X-ray scattering (SAXS), an in vitro DMA release study, atomic force microscopy (AFM), a hemolysis test, and in vivo bone formation. The swelling degree, SAXS, and release results revealed that the u-PPO400/2000 membrane in the proportion of 70:30 showed swelling (4.69% ± 0.22) similar to the proportions 90:10 and 80:20, and lower than the proportion 60:40 (6.38% ± 0.49); however, an equal release percentage after 134 h was observed between the proportions 70:30 and 60:40. All u-PPO materials presented hemocompatibility (hemolysis ≤2.8%). AFM results showed that the treatments with or without DMA did not present significant differences, revealing a flat/smooth surface, with no pores and/or crystalline precipitates. Finally, in vivo results revealed that for both the commercial hydrophilic membrane and u-PPO400/2000 (70:30) after 60 days, the bone formation volume was 21%. In conclusion, hybrid membranes present unique characteristics for treating critical bone defects, considering the delayed and prolonged release results associated with the physical barrier capacity.

On the Combined Effect of Both the Reinforcement and a Waste Based Interfacial Modifier on the Matrix Glass Transition in iPP/a-PP-pPBMA/Mica Composites

This work deals with the changes of the glass transition temperature (T_g) of the polymer in polypropylene/mica composites due to the combined and synergistic effect of the reinforcement and the interfacial modifier. In our case, we studied the effect on T_g of platy mica and an interfacial modifier with p-phenylen-bis-maleamic acid (pPBMA) grafted groups onto atactic polypropylene (aPP-pPBMA). This one contains 5.0 × 10^-4 g·mol^-1 (15% w/w) grafted pPBMA and was previously obtained by the author's labs by using industrial polymerization wastes (aPP). The objective of the article must be perceived as two-fold. On one hand, the determination of the changes in the glass transition temperature of the isotactic polypropylene phase (iPP) due to both the reinforcement and the agent as determined form the damp factor in DMA analysis. On the other hand, forecasting the variation of this parameter (T_g) as a function of both the interfacial agent and reinforcement content. For such purposes, and by assuming the complex character of the iPP/aPP-pPBMA/Mica system, wherein interaction between the components will define the final behaviour, a Box-Wilson experimental design considering the amount of mica particles and of interface agent as the independent variables, and the T_g as the dependent one, has been used. By taking in mind that the glass transition is a design threshold for the ultimate properties of parts based in this type of organic-inorganic hybrid materials, the final purpose of the work is the prediction and interpretation of the effect of both variables on this key parameter.

Recent Advances and Trends of Nanofilled/Nanostructured Epoxies

This paper aims at reviewing the works published in the last five years (2016–2020) on polymer nanocomposites based on epoxy resins. The different nanofillers successfully added to epoxies to enhance some of their characteristics, in relation to the nature and the feature of each nanofiller, are illustrated. The organic–inorganic hybrid nanostructured epoxies are also introduced and their strong potential in many applications has been highlighted. The different methods and routes employed for the production of nanofilled/nanostructured epoxies are described. A discussion of the main properties and final performance, which comprise durability, of epoxy nanocomposites, depending on chemical nature, shape, and size of nanoparticles and on their distribution, is presented. It is also shown why an efficient uniform dispersion of the nanofillers in the epoxy matrix, along with strong interfacial interactions with the polymeric network, will guarantee the success of the application for which the nanocomposite is proposed. The mechanisms yielding to the improved properties in comparison to the neat polymer are illustrated. The most important applications in which these new materials can better exploit their uniqueness are finally presented, also evidencing the aspects that limit a wider diffusion.

Effect of Humidity on Light-Activated NO and NO2 Gas Sensing by Hybrid Materials

Air humidity is one of the main factors affecting the characteristics of semiconductor gas sensors, especially at low measurement temperatures. In this work we analyzed the influence of relative humidity on sensor properties of the hybrid materials based on the nanocrystalline SnO₂ and In₂O₃ and Ru (II) heterocyclic complex and verified the possibility of using such materials for NO (0.25–4.0 ppm) and NO₂ (0.05–1.0 ppm) detection in high humidity conditions (relative humidity (RH) = 20%, 40%, 65%, 90%) at room temperature during periodic blue (λ_max = 470 nm) illumination. To reveal the reasons for the different influence of humidity on the sensors’ sensitivity when detecting NO and NO₂, electron paramagnetic resonance (EPR) spectroscopy and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) investigations were undertaken. It was established that the substitution of adsorbed oxygen by water molecules causes the decrease in sensor response to NO in humid air. The influence of humidity on the interaction of sensitive materials with NO₂ is determined by the following factors: the increase in charge carrier’s concentration, the decrease in the number of active sites capable of interacting with gases, and possible substitution of chemisorbed oxygen with NO₂⁻ groups.

Interfacial charge transfer processes in 2D and 3D semiconducting hybrid perovskites: azobenzene as photoswitchable ligand

In the vast majority of studies on semiconductor particles ligands or capping agents are used that bind to the surface of the particles covering them with an electrically insulating shell. Since the transport of charge carriers and/or energy across interfaces is desirable for a variety of applications, the use of π-conjugated ligands becomes increasingly interesting. Among them are compounds that react to external stimuli. Molecular switches in particular are fascinating because the properties of the interfaces can be potentially adjusted as required. However, there is debate about how the properties of such special ligands are influenced by the presence of a semiconductor and vice versa. Here ammonium-modified azobenzene compounds were selected as prototypes for molecular switches and organic-inorganic hybrid perovskites as semiconductor materials. The class of ammonium-lead-halide phases as prototypes is peculiar because, in addition to the surface functionalization of 3D crystals, organic compounds can actually be incorporated into the crystal as 2D phases. Thus, for example, layered Ruddlesden-Popper phases are obtained. We present photoswitchable azobenzene ligands with different head-group lengths for the synthesis of 2D and 3D hybrid perovskite phases. The energy transfer mechanisms are influenced by the length of the molecular spacer moiety, which determines the distance between the π system and the semiconductor surfaces. We find huge differences in the photoswitching behaviour between the free, surface-coordinated and integrated ligands between the perovskite layers. Photoswitching of azobenzene ligands incorporated in 2D phases is nearly quenched, while the same mechanism for surface-coordinating ligands is greatly improved, compared to the free ligands. The improvement originates from an energy transfer from perovskite to azobenzene, which is strongly distance-dependent. This study provides evidence for the photoswitching of azobenzenes as ligands of hybrid perovskites, which depends on the spacing between the chromophore and the perovskite phase.

Organic-Inorganic Hybrid Materials for Room Temperature Light-Activated Sub-ppm NO Detection

Nitric oxide (NO) is one of the main environmental pollutants and one of the biomarkers noninvasive diagnosis of respiratory diseases. Organic-inorganic hybrids based on heterocyclic Ru (II) complex and nanocrystalline semiconductor oxides SnO2 and In2O3 were studied as sensitive materials for NO detection at room temperature under periodic blue light (λmax = 470 nm) illumination. The semiconductor matrixes were obtained by chemical precipitation with subsequent thermal annealing and characterized by XRD, Raman spectroscopy, and single-point BET methods. The heterocyclic Ru (II) complex was synthesized for the first time and characterized by 1H NMR, 13C NMR, MALDI-TOF mass spectrometry and elemental analysis. The HOMO and LUMO energies of the Ru (II) complex are calculated from cyclic voltammetry data. The thermal stability of hybrids was investigated by thermogravimetric analysis (TGA)-MS analysis. The optical properties of Ru (II) complex, nanocrystalline oxides and hybrids were studied by UV-Vis spectroscopy in transmission and diffuse reflectance modes. DRIFT spectroscopy was performed to investigate the interaction between NO and the surface of the synthesized materials. Sensor measurements demonstrate that hybrid materials are able to detect NO at room temperature in the concentration range of 0.25-4.0 ppm with the detection limit of 69-88 ppb.

Mercapto-Functionalized Porous Organosilica Monoliths Loaded with Gold Nanoparticles for Catalytic Application

Porous organosilica monoliths have attracted much attention from both the academic and industrial fields due to their porous structure; excellent mechanical property and easily functionalized surface. A new mercapto-functionalized silicone monolith from a precursor mixture containing methyltrimethoxysilane; 3-mercaptopropyltrimethoxysilane; and 3-mercaptopropyl(dimethoxy)methylsilane prepared via a two-step acid/base hydrolysis–polycondensation process was reported. Silane precursor ratios and surfactant type were varied to control the networks of porous monolithic gels. Gold nanoparticles were loaded onto the surface of the porous organosilica monolith (POM). Versatile characterization techniques were utilized to investigate the properties of the synthesized materials with and without gold nanoparticles. Scanning electron microscopy was used to investigate the morphology of the as-synthesized porous monolith materials. Fourier transform infrared spectroscopy was applied to confirm the surface chemistry. ²⁹Si nuclear magnetic resonance was used to investigate the hydrolysis and polycondensation of organosilane precursors. Transmission electron microscopy was carried out to prove the existence of well-dispersed gold nanoparticles on the porous materials. Ultraviolet–visible spectroscopy was utilized to evaluate the high catalytic performance of the as-synthesized Au/POM particles

Water-Dispersible Bismuth-Organic Materials with Computed Tomography Contrast Properties

Two bismuth-organic network polymers were synthesized by means of a one-step polycondensation reaction between an aromatic dithiol/trithiol and triphenylbismuth. The materials were characterized by solid-state UV-vis spectroscopy, Raman spectroscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy, powder X-ray diffraction, elemental microanalysis, and thermogravimetric analysis. Uniform dispersion of the hydrophobic and water-insoluble bismuth-containing polymers in aqueous media was achieved by the addition of 2 kDa poly(ethylene glycol) methyl ether thiol. This enabled quantitative phantom imaging experiments on a clinical computed tomography (CT) scanner, which showed that the coordination polymers possessed strong CT contrast properties. The observed X-ray attenuation properties of each coordination polymer were correlated with its bismuth payload. The X-ray opacity, thermal and chemical stabilities, and aqueous dispersibility of this novel class of bismuth-organic materials make them potentially useful as biomedical CT contrast agents and radiopaque materials.

Photosensitive Organic-Inorganic Hybrid Materials for Room Temperature Gas Sensor Applications

In this work, the hybrids based on nanocrystalline SnO₂ or In₂O₃ semiconductor matrixes and heterocyclic Ru(II) complex are studied as materials for gas sensors operating at room temperature under photoactivation with visible light. Nanocrystalline semiconductor oxides are obtained by chemical precipitation with subsequent thermal annealing and characterized by XRD, SEM and single-point BET methods. The heterocyclic Ru(II) complex is synthesized for the first time and investigated by ¹H NMR, ¹³C NMR APT, MALDI-MS analysis, and UV-Vis spectroscopy. The HOMO and LUMO energies of the Ru(II) complex are calculated from cyclic voltammetry data. The hybrid materials are characterized by TGA-MS analysis and EDX mapping. The optical properties of hybrids are studied by UV-Vis spectroscopy in the diffuse reflection mode. The investigation of spectral dependencies of photoconductivity of hybrid samples demonstrates that the role of organic dye consists in shifting the photosensitivity range towards longer wavelengths. Sensor measurements demonstrate that hybrid materials are able to detect NO₂ in the concentration range of 0.25⁻2 ppm without the use of thermal heating under periodic illumination with even low-energy long-wavelength (red) light.

Further Theoretical Insight into the Mechanical Properties of Polycaprolactone Loaded with Organic-Inorganic Hybrid Fillers

Experimental/theoretical analyses have already been performed on poly(ε-caprolactone) (PCL) loaded with organic-inorganic fillers (PCL/TiO₂ and PCL/ZrO₂) to find a correlation between the results from the small punch test and Young's modulus of the materials. PCL loaded with Ti2 (PCL = 12, TiO₂ = 88 wt %) and Zr2 (PCL = 12, ZrO₂ = 88 wt %) hybrid fillers showed better performances than those obtained for the other particle composition. In this context, the aim of current research is to provide further insight into the mechanical properties of PCL loaded with sol-gel-synthesized organic-inorganic hybrid fillers for bone tissue engineering. For this reason, theoretical analyses were performed by the finite element method. The results from the small punch test and Young's modulus of the materials were newly correlated. The obtained values of Young's modulus (193 MPa for PCL, 378 MPa for PCL/Ti2 and 415 MPa for PCL/Zr2) were higher than those obtained from a previous theoretical modelling (144 MPa for PCL, 282 MPa for PCL/Ti2 and 310 MPa for PCL/Zr2). This correlation will be an important step for the evaluation of Young's modulus, starting from the small punch test data.

H₂S Sensing by Hybrids Based on Nanocrystalline SnO₂ Functionalized with Cu(II) Organometallic Complexes: The Role of the Ligand Platform

This paper deals with the functionalization of nanocrystalline SnO₂ with Cu(II) complexes with organic ligands, aimed at the improvement of sensor selectivity towards gas molecules. For the synthesis of metalorganic/SnO₂ hybrid material complexes of Cu(II) with phthalocyanine, porphyrinines, bipyridine and azadithiacrown etherwere used. The analysis of gas sensor properties showed the possibility of increasing the sensitivity and selectivity of hybrid materials in H₂S detection due to the electron transfer from SnO₂ to an adsorbed organic molecule, which changes during the interaction between H₂S and Cu(II) ions.

Controlling the dispersion of supported polyoxometalate heterogeneous catalysts: impact of hybridization and the role of hydrophilicity-hydrophobicity balance and supramolecularity

The hybridization of polyoxometalates (POMs) through an organic-inorganic association offers several processing advantages in the design of heterogeneous catalysts. A clear understanding of the organization of these hybrid materials on solid surfaces is necessary to optimise their properties. Herein, we report for the first time the organization of Keggin phosphotungstic [PW12O40](3-) and Wells-Dawson (WD) phosphomolybdic [P2Mo18O62](6-) anions deposited on mica (hydrophilic), and highly oriented pyrolytic graphite (HOPG) (hydrophobic) surfaces. Next, the supramolecular organization of the organic-inorganic hybrid materials formed from the association of POM anions and dimethyldioctadecylammonium bromide (DODA) is investigated as a function of the hydrophilic or hydrophobic nature of the surfaces. The height of the Keggin-POM anions, measured with tapping mode (TM-AFM) is always in good agreement with the molecular dimension of symmetric Keggin-POM anions (ca. 1 nm). However, the asymmetric WD-POM anions form monolayer assemblies on the surfaces with the orientation of their long molecular axis (ca. 1.6 nm) depending on the hydrophilic or hydrophobic properties of the substrate. Namely, the long axis is parallel on mica, and perpendicular on HOPG. When hybridized with DODA, the organization of the hybrid material is dictated by the interaction of the alkyl side chains of DODA with the substrate surface. On HOPG, the DODA-POM hybrid forms small domains of epitaxially arranged straight nanorod structures with their orientation parallel to each other. Conversely, randomly distributed nanospheres are formed when the hybrid material is deposited on freshly cleaved mica. Finally, a UV-ozone treatment of the hybrid material allows one to obtain highly dispersed isolated POM entities on both hydrophilic and hydrophobic surfaces. The hybridization strategy to prevent the clustering of POMs on various supports would enable to develop highly dispersed POM-based heterogeneous catalysts with enhanced functionalities.

The organic-inorganic hybrid material 1-cyclohexylpiperazine-1,4-diium tetrachloridozincate

In the crystal structure of the title organic-inorganic hybrid material, (C10H22N2)[ZnCl4], the tetrachloridozincate anions and 1-cyclohexylpiperazine-1,4-diium dications are interconnected via N-H...Cl and C-H...Cl hydrogen bonds to form layers parallel to the (001) plane. The cyclohexyl groups from adjacent chains interdigitate, thus building the three-dimensional structure. The piperazinium and cyclohexyl rings exhibit regular spatial chair conformations. The title salt was also characterized by FT-IR and Raman spectroscopic analyses.