A review of environmentally friendly rubber production using different vegetable oils

Rubber oily liquids as transdermal and periodontal pocket drug delivery systems

This study investigates the incorporation of block natural rubber (NR) as a viscosity-inducing agent in NR oily liquids designed for drug delivery systems. A variety of liquids, encompassing natural oils, synthetic and non-oil liquids, and a eutectic mixture, were incorporated with NR using solvent displacement technique. Successful formulations were achieved for several oily liquids, with viscosity correlating to NR concentration. Particularly, a eutectic mixture of menthol and camphor exhibited optimal viscosity by direct dissolving enabling the development of transdermal ibuprofen delivery and injectable azithromycin for periodontitis treatment. NR prolonged the release of both drugs. The extended-release ibuprofen system holds promise for transdermal applications, while the azithromycin system displayed inhibitory effects against Staphylococcus aureus, Streptococcus mutans, and Porphyromonas gingivalis, suggesting potential for periodontitis treatment. Overall, this investigation advances the development of NR oily liquids as a versatile drug delivery system that can be applied both on the skin and for the local injection into the periodontal pocket, showcasing promise for various therapeutic applications.

Utilization of Plant Oils for Sustainable Polyurethane Adhesives: A Review

The utilization of plant oils as a renewable resource for the production of polyurethane adhesives presents a promising way to improve sustainability and reduce environmental impact. This review explores the potential of various vegetable oils, including waste oils, in the synthesis of polyurethanes as an alternative to conventional petroleum-based raw materials. The investigation highlights the environmental challenges associated with conventional polyurethane production and highlights the benefits of switching to bio-renewable oils. By examining the feasibility and potential applications of vegetable oil-based polyurethanes, this study emphasizes the importance of further research and development in this area to realize the full potential of sustainable polyurethane adhesives. Further research and development in this area are key to overcoming the challenges and realizing the full potential of plant-oil-based polyurethanes in various industrial applications.

Vulcanization kinetics and reinforcement behaviour of natural rubber-carbon black composites: Addition of Shea-butter versus aromatic oil as plasticizers

This work is a comparative study between Shea butter (SB) and treated distillate aromatic extract oil (TDAE) as plasticizers in the vulcanization of natural rubber (NR)- carbon black (CB) vulcanizates (-CB-S-NR-). The plasticized -CB-S-NR- composites extended scorch (Ts2) and optimum (T90) curing times. The delays in crosslinking reaction were suspected to be due to the increased viscosity (ML) and insulation of the reacting species (NR, CB, Sulfur and other curing aids) by the films of plasticizers. This effect increased the activation energy (Ea (KJ/mol)) for vulcanization. The -CB-S-NR- without plasticizer SB (SBO), showed higher ML, crosslinking density index (ΔM), rheological strength (MH) and low cure reversion properties than others. In comparison, the SB loaded -CB-S-NR- composites showed improvement in ML, ΔM, T90, with lowers Ea (KJ/mol) than TDAE samples. Also, the SB compounds exhibited higher Young's modulus Eo(MPa) than SBO and TDAE compounds. For instance, the Eo(MPa) of SB5 was over 7 and 1200 % higher than SBO and STD5 respectively. However, -CB-S-NR- filled with TDAE generally showed higher strength(MPa), attributed to stronger CB-NR interactions. Therefore, environmentally friendly SB could replace petroleum based oils for compounding rubbers.

Property Improvements of Silica-Filled Styrene Butadiene Rubber/Butadiene Rubber Blend Incorporated with Fatty-Acid-Containing Palm Oil

Using vegetable oils as a plasticizer or processing aid in green rubber products is becoming popular due to environmental concerns. However, differences in vegetable oil processing result in varying amounts of low-molecular-weight (low-MW) free fatty acids (FFAs) in their composition, which range from 2% to 30%. This research investigated how the properties of silica-filled styrene butadiene rubber (SBR) and butadiene rubber (BR) blends were affected by the presence of FFAs in palm oil (PO). The rubber compounds containing a 70/30 SBR/BR blend, 30 phr of silica, and 2 phr of bis-(3-triethoxysilylpropyl) tetrasulfide (TESPT), and the vulcanizing agents were prepared and tested. The PO content was kept constant at 20 phr, while the number of FFAs, i.e., lauric acid (LA), palmitic acid (PA), and oleic acid (OA), in PO varied from 10-30%. The viscosity, dynamic mechanical properties, morphology, cure characteristics, and mechanical properties of the rubber blend were then measured. Regardless of the FFA types, increasing FFA content in PO decreased scorch time, cure time, minimum torque, and viscosity. As the FFA content increased, the torque difference and crosslink density also increased, which led to higher hardness, modulus, tensile strength, and abrasion resistance. The FFA types had a slight effect on the vulcanizate properties, even though LA showed slightly better mechanical properties than PA and OA. The results reveal that FFAs in PO not only improve processability but also function as a co-activator in silica-filled sulfur-vulcanized SBR/BR blend compounds.

Unfilled Natural Rubber Compounds Containing Bio-Oil Cured with Different Curing Systems: A Comparative Study

This study focuses on the properties of unfilled natural rubber compounds containing bio-oils cured with a peroxide curing system and then discusses the comparisons to those cured using the sulfur system from our previous work. Two types of bio-oils, i.e., palm oil and soybean oil, were used, and distillate aromatic extract (DAE)-based petroleum oil was employed as a reference. The bio-oils caused no significant change in the vulcanization of rubber compounds cured using peroxide. However, the compounds containing bio-oils and cured with sulfur showed a faster vulcanization than the ones with DAE. The bio-oils strongly affected the crosslink density of rubber compounds in both curing systems. The use of bio-oils caused a low crosslink density due to the possible implication of curing agents to bio-oil molecules. The properties of rubber compounds dependent on the different levels of crosslink density were also investigated. The results revealed that when the crosslink density increased, the modulus, tensile strength, and hardness of the rubber compounds increased and the elongation at break and compression set decreased. The use of bio-oils in the rubber compounds cured with different curing systems gave low modulus at 300% strain, tensile strength, and hardness but high elongation at break and compression set when compared to the ones with DAE. However, no significant change was observed for the compression set of the rubber compounds cured using sulfur. With the presence of bio-oils, the properties of rubber compounds cured with sulfur system deteriorated less than those of the ones cured with peroxide.

Semiquantitative Solid-State NMR Study of the Adsorption of Soybean Oils on Silica and Its Significance for Rubber Processing

Soybean oil (SBO) is a renewable material used as an alternative to conventional petroleum-derived oils in the processing of rubber composites. Upon chemical modifications, such as epoxidation, its performance in the processing of rubber can be significantly improved, as indicated by a considerable reduction of the mixing energy. Although it has been hypothesized that hydrogen bonding between functional groups (e.g., epoxy) of SBOs and silanols present on the silica surface plays a key role, there is still a lack of direct evidence supporting this hypothesis. In this work, it is demonstrated that there is an overall correlation between the epoxy concentration of SBOs and the mixing energy, consistent with the long-held hypothesis. In particular, a correlation between the SBO-silica adsorption affinity and the degree of epoxidation is revealed by a set of surface-selective solid-state nuclear magnetic resonance (ssNMR) experiments. In addition, the surface-selective ssNMR technique demonstrated in this work could also be used to evaluate the adsorption affinity of other oils and/or additives more broadly.

Preservation of geochemical markers during co-combustion of hard coal and various domestic waste materials

Combustion of domestic waste for heating purposes in non-adapted furnaces is a common environmental problem all over the world since it leads to significant emission of harmful substances to the atmosphere. In this project fly and bottom ash from hard coal and domestic waste co-combustion were investigated on the occurrence and distribution of geochemical markers, polycyclic aromatic hydrocarbons (PAHs), and their alkyl derivatives. Hard coal with a domestic waste admixture (paper, ethylene propylene diene rubber, tire rubber, polyethylene, polyvinyl chloride) was combusted in a certified domestic central heating furnace equipped with a control and measurement system. Fly ash was collected on glass microfiber filters inside the flue gas chimney. Raw fuels, fly and bottom ash extracts were analyzed with gas chromatography-mass spectrometry (GC-MS). Geochemical markers survived the coal/domestic waste combustion and can be identified despite the presence of other organic compounds derived from domestic waste thermal decay. The highest changes in distribution and values of geochemical ratios concern light-weight compounds, i.e. lighter n-alkanes and acyclic isoprenoids (pristane and phytane), with distinct differences between fly and bottom ash. n-Alkanes expulsion significantly decreased values of Pr/n-C₁₇ and Ph/n-C₁₈ ratios. Due to their high molecular weight pentacyclic triterpanes mostly retained their original distributions; however, some shifts in values of their thermal maturity ratios occurred due to artificial maturation of organic matter under the heat of combustion. PAHs diagnostic ratios showed variable utility in the indication of domestic waste admixture to hard coal combusted. The highest sensitivity was found for BaP/BghiP, MPI-1, and MPI-3 whereas Fl/(Fl + Py) rather pointed out at hard coal dominating in the fuel mixture. The addition of EPDM and tires significantly worsened the quality of combustion, which is reflected in high extract yields and the retained hard coal geochemical features such as the Pr/Ph value closest to the raw coal value.