Functional modification of biodegradable polyesters through a chemoselective approach: application to biomaterial surfaces

Main Structural Targets for Engineering Lipase Substrate Specificity

Microbial lipases represent one of the most important groups of biotechnological biocatalysts. However, the high-level production of lipases requires an understanding of the molecular mechanisms of gene expression, folding, and secretion processes. Stable, selective, and productive lipase is essential for modern chemical industries, as most lipases cannot work in different process conditions. However, the screening and isolation of a new lipase with desired and specific properties would be time consuming, and costly, so researchers typically modify an available lipase with a certain potential for minimizing cost. Improving enzyme properties is associated with altering the enzymatic structure by changing one or several amino acids in the protein sequence. This review detailed the main sources, classification, structural properties, and mutagenic approaches, such as rational design (site direct mutagenesis, iterative saturation mutagenesis) and direct evolution (error prone PCR, DNA shuffling), for achieving modification goals. Here, both techniques were reviewed, with different results for lipase engineering, with a particular focus on improving or changing lipase specificity. Changing the amino acid sequences of the binding pocket or lid region of the lipase led to remarkable enzyme substrate specificity and enantioselectivity improvement. Site-directed mutagenesis is one of the appropriate methods to alter the enzyme sequence, as compared to random mutagenesis, such as error-prone PCR. This contribution has summarized and evaluated several experimental studies on modifying the substrate specificity of lipases.

Scaffolding polymeric biomaterials: Are naturally occurring biological macromolecules more appropriate for tissue engineering?

Nowadays, tissue and organ failures resulted from injury, aging accounts, diseases or other type of damages is one of the most important health problems with an increasing incidence worldwide. Current treatments have limitations including, low graft efficiency, shortage of donor organs, as well as immunological problems. In this context, tissue engineering (TE) was introduced as a novel and versatile approach for restoring tissue/organ function using living cells, scaffold and bioactive (macro-)molecules. Among these, scaffold as a three-dimensional (3D) support material, provide physical and chemical cues for seeding cells and has an essential role in cell missions. Among the wide verity of scaffolding materials, natural or synthetic biopolymers are the most commonly biomaterials mainly due to their unique physicochemical and biological features. In this context, naturally occurring biological macromolecules are particular of interest owing to their low immunogenicity, excellent biocompatibility and cytocompatibility, as well as antigenicity that qualified them as popular choices for scaffolding applications. In this review, we highlighted the potentials of natural and synthetic polymers as scaffolding materials. The properties, advantages, and disadvantages of both polymer types as well as the current status, challenges, and recent progresses regarding the application of them as scaffolding biomaterials are also discussed.

A Functionalized Cyclic Lactide Monomer for Synthesis of Water-Soluble Poly(Lactic Acid) and Amphiphilic Diblock Poly(Lactic Acid)

Biodegradable and bioabsorbable poly(lactic acid)s are one of the most important biomedical materials. However, it is difficult to introduce the functional groups into poly(lactic acid)s in order to improve their hydrophilicity and degradation rate. Here the authors describe the synthesis of functionalized cyclic lactide monomer 3,6-bis(benzyloxymethyl)-1,4-dioxane-2,5-dione (BnLA) using an advanced synthetic route. Water-soluble hydroxyl-functionalized homopoly(lactic acid) (P(OH)LA) is synthesized via ring-opening polymerization (ROP) of BnLA, followed by a hydrogenolytic deprotection reaction. Amphiphilic diblock poly(lactic acid) (P(OH)LA-PLA) is synthesized via ROP of DL-lactide using PBnLA as an initiator, followed by a hydrogenolytic deprotection reaction. P(OH)LA-PLA is able to form polymeric micelles with the diameter of sub-100 nm.

Genome mining of fungal lipid-degrading enzymes for industrial applications

Lipases are interesting enzymes, which contribute important roles in maintaining lipid homeostasis and cellular metabolisms. Using available genome data, seven lipase families of oleaginous and non-oleaginous yeast and fungi were categorized based on the similarity of their amino acid sequences and conserved structural domains. Of them, triacylglycerol lipase (patatin-domain-containing protein) and steryl ester hydrolase (abhydro_lipase-domain-containing protein) families were ubiquitous enzymes found in all species studied. The two essential lipases rendered signature characteristics of integral membrane proteins that might be targeted to lipid monolayer particles. At least one of the extracellular lipase families existed in each species of yeast and fungi. We found that the diversity of lipase families and the number of genes in individual families of oleaginous strains were greater than those identified in non-oleaginous species, which might play a role in nutrient acquisition from surrounding hydrophobic substrates and attribute to their obese phenotype. The gene/enzyme catalogue and relevant informative data of the lipases provided by this study are not only valuable toolboxes for investigation of the biological role of these lipases, but also convey potential in various industrial applications.

Polylactide-graft-doxorubicin nanoparticles with precisely controlled drug loading for pH-triggered drug delivery

Nanoparticles (NPs) with high drug loading and pH-responsivity were prepared by nanoprecipitation of a hydrophobic polymer-drug conjugate (PDC). The PDC, polylactide-graft-doxorubicin (PLA-g-DOX), was synthesized by azide-alkyne click reaction to transform acetylene-functionalized PLA into PLA-graft-aldehyde (PLA-g-ALD), followed by DOX conjugation to form acid-sensitive Schiff base linkage between drug moieties and polymer scaffold. The DOX loading amount in PLA-g-DOX PDC was determined to be 32 wt % by (1)H NMR and UV-vis spectroscopies. PLA-g-DOX PDC was further used to prepare NPs with precisely controlled drug loading by nanoprecipitation in the presence of a PEGylated surfactant. The effects of organic solvent, PLA-g-DOX PDC concentration and PLA-g-DOX/surfactant mass ratio on size and size distribution of NPs were systematically examined based on analysis by dynamic light scattering (DLS) and transmission electron microscopy (TEM). NPs prepared under the optimal conditions exhibited well-defined spherical morphology with volume-average hydrodynamic diameter (Dh) around 100 nm. Due to the Schiff base conjugation linkage in PLA-g-DOX PDC, acid-sensitive drug release behavior of the NPs was observed. In vitro studies against MCF-7 breast cancer cells showed that the NPs can be readily taken up and result in enhanced therapeutic efficiency as compared to DOX·HCl, indicating their promising potential applications as anticancer nanomedicines.

Benzyl β-malolactonate polymers: a long story with recent advances

Benzyl β-malolactonate (MLABe) and its corresponding poly(benzyl β-malolactonate) (PMLABe) homopolymers and copolymers of the poly(hydroxyalkanoate) (PHA) family.

Facile Synthesis of Functionalized Lactones and Organocatalytic Ring-Opening Polymerization

A facile one-step synthesis of functionalized valerolactones was carried out by the conjugate addition of thiols to the α,β-unsaturated valerolactone 5,6-dihydro-2H-pyran-2-one. The resultant 3-mercaptovalerolactones undergo ring-opening polymerization in solution or in the melt to generate polyesters functionalized either with benzyl mercaptans or oligoethylene glycol pendant groups. The copolymerization of the 3-mercaptovalerolactones with ε-caprolactone generates random copolymers.

Evolving the use of peptides as components of biomaterials

This manuscript is part of a debate on the statement that "the use of short synthetic adhesion peptides, like RGD, is the best approach in the design of biomaterials that guide cell behavior for regenerative medicine and tissue engineering". We take the position that although there are some acknowledged disadvantages of using short peptide ligands within biomaterials, it is not necessary to discard the notion of using peptides within biomaterials entirely, but rather to reinvent and evolve their use. Peptides possess advantageous chemical definition, access to non-native chemistries, amenability to de novo design, and applicability within parallel approaches. Biomaterials development programs that require such aspects may benefit from a peptide-based strategy.

Surface investigation on biomimetic materials to control cell adhesion: the case of RGD conjugation on PCL

The cell recognition of bioactive ligands immobilized on polymeric surfaces is strongly dependent on ligand presentation at the cell/material interface. While small peptide sequences such as Arg-Gly-Asp (RGD) are being widely used to obtain biomimetic interfaces, surface characteristics after immobilization as well as presentation of such ligands to cell receptors deserve more detailed investigation. Here, we immobilized an RGD-based sequence on poly(epsilon-caprolactone) (PCL), a largely widespread polymeric material used in biomedical applications, after polymer aminolysis. The surface characteristics along with the efficacy of the functionalization was monitored by surface analysis (FTIR-ATR, contact angle measurements, surface free energy determination) and spectrophotometric assays specially adapted for the analytical quantification of functional groups and/or peptides at the interface. Particular attention was paid to the evaluation of a number, morphology, and penetration depth of immobilized functional groups and/or peptides engrafted on polymeric substrates. In particular, a typical morphology in peptide distribution was evidenced on the surface raised from polymer crystallites, while a significant penetration depth of the engrafted molecules was revealed. NIH3T3 fibroblast adhesion studies verified the correct presentation of the ligand with enhanced cell attachment after peptide conjugation. Such work proposes a morphological and analytical approach in surface characterization to study the surface treatment and the distribution of ligands immobilized on polymeric substrates.

A functionalizable polyester with free hydroxyl groups and tunable physiochemical and biological properties

Polyesters with free functional groups allow facile modifications with biomolecules, which can lead to versatile biomaterials that afford controlled interactions with cells and tissues. Efficient synthesis of functionalizable polyesters (Functionalizable polymer is defined as a polymer with functional groups that readily react with biomolecules and functionalized biomaterial as one already modified with biomolecules.) is still a challenge that greatly limits the availability and widespread applications of biofunctionalized synthetic polymers. Here we report a simple route to prepare a functionalizable polyester, poly(sebacoyl diglyceride) (PSeD) bearing free hydroxyl groups. The key synthetic step is an epoxide ring-opening polymerization, instead of the traditional polycondensation that produces poly(glycerol sebacate) (PGS) (Wang YD, Ameer GA, Sheppard BJ, Langer R. A tough biodegradable elastomer. Nat Biotechnol 2002;20(6):602-6). PSeD has a more defined structure with mostly linear backbone, more free hydroxyl groups, higher molecular weight, and lower polydispersity than PGS. Crosslinking PSeD with sebacic acid yields a polymer five times tougher and more elastic than cured PGS. PSeD exhibits good cytocompatibility in vitro. Furthermore, functionalization by glycine proceeds with high efficiency. This versatile synthetic platform can offer a large family of biodegradable, functionalized polymers with tunable physiochemical and biological properties useful for a wide range of biomedical applications.

Micellar carrier based on methoxy poly(ethylene glycol)-block-poly(epsilon-caprolactone) block copolymers bearing ketone groups on the polyester block for doxorubicin delivery

Block copolymers of Methoxy poly(ethylene glycol)-block-poly(epsilon-caprolactone) bearing ketone groups (MPEG-b-P(CL-co-OPD)) are synthesized and evaluated for its potential to form micelles containing doxorubicin (DOX), a representative anticancer drug, by using an in vitro method based on membrane dialysis to emulate drug release in vivo. The (1)H NMR spectra of the prepared block copolymers in D(2)O solution exhibit peaks due to the P(OPD-co-CL) in decreased intensity, indicates that the polymers form micelle particles containing the hydrophilic segments in their external parts. The CMC of the copolymer decrease with an increase in the content of ketone groups in the hydrophobic chain. Drug-free and drug-loaded solutions of structurally related copolymers indicate the polymeric aggregation into micellar-type constructs. The size of the drug-loaded micelles is found to be larger than corresponding drug-free micelles. The release rate of MPEG-b-PCL micelles is faster than MPEG-b-P(OPD-co-CL) micelles in pH 7.4 buffered solution and they have a similar release rate in pH 5.0 buffered solution. This study, therefore, confirms the potential of a novel functional block copolymers, Methoxy poly(ethylene glycol)-block-poly(epsilon-caprolactone) bearing ketone Groups, for the formation of polymeric micelles for drug delivery.

PEGylated polymers for medicine: from conjugation to self-assembled systems

Synthetic polymers have transformed society in many areas of science and technology, including recent breakthroughs in medicine. Synthetic polymers now offer unique and versatile platforms for drug delivery, as they can be "bio-tailored" for applications as implants, medical devices, and injectable polymer-drug conjugates. However, while several currently used therapeutic proteins and small molecule drugs have benefited from synthetic polymers, the full potential of polymer-based drug delivery platforms has not yet been realized. This review examines both general advantages and specific cases of synthetic polymers in drug delivery, focusing on PEGylation in the context of polymer architecture, self-assembly, and conjugation techniques that show considerable effectiveness and/or potential in therapeutics.

Excimer laser chemical ammonia patterning on PET film

Laser is a promising technique used for biopolymer surface modification with micro and/or nano features. In this work, a 193 nm excimer laser was used for poly (ethylene terephthalate) (PET) surfaces chemical patterning. The ablation threshold of the PET film used in the experiments was 62 mJ/cm(2) measured before surface modification. Surface chemical patterning was performed by irradiating PET film in a vacuum chamber filled with ammonia at the flux of 10, 15, 20, 25 ml/min. Roughness of the surface characterized by profilometry showed that there were no significant observed change after modification comparing original film. But the hydrophilicity of the surface increased after patterning and a minimum water contact angle was obtained at the gas flux of 20 ml/min. FT-IR/ATR results showed the distinct amino absorption bands presented at 3352 cm(-1)and 1613 cm(-1) after modification and XPS binding energies of C(1s) at 285.5 eV and N(1s) at 399.0 eV verified the existence of C-N bond formation on the PET film surface. Tof-SIMS ions mapping used to identify the amine containing fragments corroborates that amino grafting mainly happened inside the laser irradiation area of the PET surface. A hypothesized radical reaction mechanism proposes that the collision between radicals in ammonia and on the PET surface caused by the incident laser provokes the grafting of amino groups.

Addition of Biological Functionality to Poly(ε-caprolactone) Films

Biodegradable polyesters such as poly(epsilon-caprolactone) (PCL) have a number of biomedical applications; however, their usage is often limited by a lack of biological functionality. In this paper, a PCL-based polymer containing pendent groups activated by 4-nitrophenyl chloroformate (NPC) and reactive toward primary amines has been cast into thin films. The reactivity of the films toward poly(l-lysine) and the cell adhesion peptide, GRGDS, was assessed, and their cell adhesive capabilities were characterized. ATR-FTIR analysis found that NPC functional groups were present on the surface of the cast film, and the synthesis, conjugation, and visualization of a fluorescent molecule on these films further demonstrated the success of this functionalization methodology. The immersion of these films into a solution of either poly(l-lysine) (PLL) or GRGDS in PBS (pH 7.4) and subsequent 3T3 fibroblast adhesion studies demonstrated significant improvement in cell adhesion and spreading over films cast from unmodified PCL. This investigation has shown that this novel NPC-containing polymer can be utilized in many applications where increased cellular adhesion is required, or the coupling of specific molecules to polymer surfaces is of interest.