The mechanism of the oxidative polymerization of aniline and the formation of supramolecular polyaniline structures

Pitfalls and challenges of peptide nucleic acid immobilisation on carbon surfaces for sequence-specific capturing of nucleic acid biomarkers

Nucleic acid sensors based on a peptide nucleic acid (PNA) probe have seen a surge in interest since their discovery in the 1990s, and after the patent protecting them expired in 2013. The appeal of PNA as capture and/or sensing probes as an alternative to standard DNA or RNA oligonucleotides originates from their superior chemical stability and affinity for complementary oligonucleotides, as well as their increased responsiveness to single base mismatches. The implementation of PNA probes onto optical and electrochemical sensors has showed great promise although progress has been hampered by issues mostly associated with surface chemistry, probe accessibility and non-specific binding. Herein, we report on a systematic comparison between various PNA immobilisation strategies on carbon substrates based on both covalent and non-covalent chemistries. Besides the use of standard electrochemical techniques to characterise the extent of surface modification, the ability of immobilised PNAs to engage in chemical interactions with freely diffusing molecules was also investigated. Using original chemical tags, this study provides a unique insight into the impact of immobilisation chemistries on PNA's (bio)availability. Rapid immobilisation of biotinylated PNA oligomers on screen-printed carbon electrode (SPCE) coated with adsorbed polystreptavidin (pSA) demonstrated highest efficiency and ease in the preparation process. An original nucleic acid sensor using this immobilisation chemistry is reported that is based on a sandwich assay between a surface bound PNA capture probe and a freely diffusing electrochemically active PNA sensing probe.

Chitosan-Polyaniline (Bio)Polymer Hybrids by Two Pathways: A Tale of Two Biocomposites

Previous research highlights the potential of polyaniline-based biocomposites as unique adsorbents for humidity sensors. This study examines several preparative routes for creating polyaniline (PANI) and chitosan (CHT) composites: Type 1-in situ polymerization of aniline with CHT; Type 2-molecular association in acidic aqueous media; and a control, Type 3-physical mixing of PANI and CHT powders (without solvent). The study aims to differentiate the bonding nature (covalent vs. noncovalent) within these composites, which posits that noncovalent composites should exhibit similar physicochemical properties regardless of the preparative route. The results indicate that Type 1 composites display features consistent with covalent and hydrogen bonding, which result in reduced water swelling versus Type 2 and 3 composites. These findings align with spectral and thermogravimetric data, suggesting more compact structure for Type 1 materials. Dye adsorption studies corroborate the unique properties for Type 1 composites, and 1H NMR results confirm the role of covalent bonding for the in situ polymerized samples. The structural stability adopts the following trend: Type 1 (covalent and noncovalent) > Type 2 (possible trace covalent and mainly noncovalent) > Type 3 (noncovalent). Types 2 and 3 are anticipated to differ based on solvent-driven complex formation. This study provides greater understanding of structure-function relationships in PANI-biopolymer composites and highlights the role of CHT as a template that involves variable (non)covalent contributions with PANI, according to the mode of preparation. The formation of composites with tailored bonding modalities will contribute to the design of improved adsorbent materials for environmental remediation to versatile humidity sensor systems.

Ferroelastic ionic organic crystals that self-heal to 95

The realm of self-healing materials integrates chemical and physical mechanisms that prevent wear and fracturing and extend the operational lifetime. Unlike the favorable rheology of amorphous soft materials that facilitates efficient contact between fragments, the efficiency of recovery of atomistically ordered materials is restricted by slower interfacial mass transport and the need for ideal physical alignment, which limits their real-world application. We report drastic enhancements in efficiency and recovery time in the self-healing of anilinium bromide, challenging these limitations. Crystals of this material recovered up to 49% within seconds and up to 95% after 100 min via ferroelastic detwinning. The spatial evolution of strain during cracking and healing was measured in real time using digital image correlation. Favorable alignment and strong ionic bonding across the interface of partially fractured crystals facilitate self-healing. This study elevates organic crystals close to the best-in-class self-healing polymers and sets an approach for durable crystal-based optoelectronics.

Evidence for Superoxide-Initiated Oxidation of Aniline in Water by Pulsed, Atmospheric Pressure Plasma

Plasma-driven solution electrochemistry (PDSE) uses plasma-generated reactive species to drive redox reactions in solution. Nonthermal, atmospheric pressure plasmas, when irradiating water, produce many redox species. While PDSE is a promising chemical tool, there is limited insight into the mechanisms of the reactions due to the variety of short-lived reagents produced. In this study, we use aniline as a model system for studying redox mechanisms of PDSE. We show that the plasma irradiation of aqueous aniline solutions drives the formation of polyaniline oligomer, which is suppressed under acidic starting conditions. The addition of (2,2,6,6-Tetramethylpiperidin-1-yl)oxyl (TEMPO), a radical scavenger, decreases the formation of oligomer by 80%, and the addition of superoxide dismutase fully hinders oligomerization. These results lead us to conclude that the oligomerization of aniline by plasma irradiation is initiated by superoxide. This discovery provides novel insights into PDSE mechanisms and illustrates a potential method of harnessing superoxide for chemical reactions.

Fabrication of a tailor-made conductive polyaniline/ascorbic acid-coated nanofibrous mat as a conductive and antioxidant cell-free cardiac patch

Polyaniline (PANI) wasin-situpolymerized on nanofibrous polycaprolactone mats as cell-free antioxidant cardiac patches (CPs), providing electrical conductivity and antioxidant properties. The fabricated CPs took advantage of intrinsic and additive antioxidant properties in the presence of PANI backbone and ascorbic acid as a biocompatible dopant of PANI. The antioxidant nature of CPs may reduce the serious repercussions of oxidative stress, produced during the ischemia-reperfusion (I/R) process following myocardial infarction. The polymerization parameters were considered as aniline (60 mM, 90 mM, and 120 mM), ascorbic acid concentrations ([aniline]:[ascorbic acid] = 3:0, 3:0.5, 3:1, 3:3), and polymerization time (1 h and 3 h). Mainly, the more aniline concentrations and polymerization time, the less sheet resistance was obtained. 1,1 diphenyl-2-picrylhydrazyl (DPPH) assay confirmed the dual antioxidant properties of prepared samples. The advantage of the employedin-situpolymerization was confirmed by the de-doping/re-doping process. Non-desirable groups were excluded based on their electrical conductivity, antioxidant properties, and biocompatibility. The remained groups protected H9c2 cells against oxidative stress and hypoxia conditions. Selected CPs reduced the intracellular reactive oxygen species content and mRNA level of caspase-3 while the Bcl-2 mRNA level was improved. Also, the selected cardiac patch could attenuate the hypertrophic impact of hydrogen peroxide on H9c2 cells. Thein vivoresults of the skin flap model confirmed the CP potency to attenuate the harmful impact of I/R.

Synthesis and Characterization of a Novel Nanosized Polyaniline

Polyaniline (PANI) is a conductive polymer easily converted into a conducting state. However, its limited mechanical properties have generated interest in fabricating PANI composites with other polymeric materials. In this study, a PANI-prevulcanized latex composite film was synthesized and fabricated in two phases following chronological steps. The first phase determined the following optimum parameters for synthesizing nanosized PANI, which were as follows: an initial molar ratio of 1, a stirring speed of 600 rpm, a synthesis temperature of 25 °C, purification via filtration, and washing using dopant acid, acetone, and distilled water. The use of a nonionic surfactant, Triton X-100, at 0.1% concentration favored PANI formation in a smaller particle size of approximately 600 nm and good dispersibility over seven days of observation compared to the use of anionic sodium dodecyl sulfate. Ultraviolet-visible spectroscopy (UV-Vis) showed that the PANI synthesized using a surfactant was in the emeraldine base form, as the washing process tends to decrease the doping level in the PANI backbone. Our scanning electron microscopy analysis showed that the optimized synthesis parameters produced colloidal PANI with an average particle size of 695 nm. This higher aspect ratio explained the higher conductivity of nanosized PANI compared to micron-sized PANI. Following the chronological steps to determine the optimal parameters produced a nanosized PANI powder. The nanosized PANI had higher conductivity than the micron-sized PANI because of its higher aspect ratio. When PANI is synthesized in smaller particle sizes, it has higher conductivity. Atomic force microscopy analysis showed that the current flow is higher across a 5 µm2 scanned area of nanosized PANI because it has a larger surface area. Thus, more sites for the current to flow through were present on the nanosized PANI particles.

A New Strong-Acid Free Route to Produce Xanthan Gum-PANI Composite Scaffold Supporting Bioelectricity

Conductive hybrid xanthan gum (XG)-polyaniline (PANI) biocomposites forming 3D structures able to mimic electrical biological functions are synthesized by a strong-acid free medium. In situ aniline oxidative chemical polymerizations are performed in XG water dispersions to produce stable XG-PANI pseudoplastic fluids. XG-PANI composites with 3D architectures are obtained by subsequent freeze-drying processes. The morphological investigation highlights the formation of porous structures; UV-vis and Raman spectroscopy characterizations assess the chemical structure of the produced composites. I-V measurements evidence electrical conductivity of the samples, while electrochemical analyses point out their capability to respond to electric stimuli with electron and ion exchanges in physiological-like environment. Trial tests on prostate cancer cells evaluate biocompatibility of the XG-PANI composite. Obtained results demonstrate that a strong acid-free route produces an electrically conductive and electrochemically active XG-PANI polymer composite. The investigation of charge transport and transfer, as well as of biocompatibility properties of composite materials produced in aqueous environments, brings new perspective for exploitation of such materials in biomedical applications. In particular, the developed strategy can be used to realize biomaterials working as scaffolds that require electrical stimulations for inducing cell growth and communication or for biosignals monitoring and analysis.

(Electro)catalytic oxidation of sulfide and recovery of elemental sulfur from sulfide-laden streams

MnxOy coated over TiO2 nanotube array substrate was doped with Mo and polyaniline (PANI) and applied for electrochemical desulfurization of concentrated sulfide (HS-) solutions at basic pH, typical of biogas scrubbing solutions and industrial wastewater. Mo and PANI co-dopants significantly enhanced the anode activity towards sulfide oxidation and ensured its complete stability even in highly corrosive sulfide solutions (e.g., 200 mM HS-). This was due to the increased electrochemically active surface area, improved coating conductivity and reduced charge transfer resistance. The (electro)catalytic oxidation of HS- demonstrated robust performance with very limited impact of different operational parameters (e.g., dissolved oxygen, anode potential, HS- concentration). Due to the formation of elemental sulfur (S0) layer at the anode surface at basic pH, longer term anode usage requires its periodic removal. Chemical dissolution of S0 with toluene allows its rapid removal without affecting the anode activity, and easy recrystallization and recovery of pure sulfur.

Nanostructured Polyaniline Films Functionalized through Auxiliary Nitrogen Addition in Atmospheric Pressure Plasma Polymerization

Polyaniline (PANI) was synthesized from liquid aniline, a nitrogen-containing aromatic compound, through the atmospheric pressure (AP) plasma process using a newly designed plasma jet array with wide spacing between plasma jets. To expand the area of the polymerized film, the newly proposed plasma jet array comprises three AP plasma jet devices spaced 7 mm apart in a triangular configuration and an electrodeless quartz tube capable of applying auxiliary gas in the center of the triangular plasma jets. The vaporized aniline monomer was synthesized into a PANI film using the proposed plasma array device. The effects of nitrogen gas addition on the morphological, chemical, and electrical properties of PANI films in AP argon plasma polymerization were examined. The iodine-doped PANI film was isolated from the atmosphere through encapsulation. The constant electrical resistance of the PANI film indicates that the conductive PANI film can achieve the desired resistance by controlling the atmospheric exposure time through encapsulation.

Photoredox-Enabled Dearomatization of Protected Anilines: Access to Cyclohexadienone Imines with Contiguous Quaternary Centers

A photoredox-enabled alkylative dearomatization of protected anilines is reported. Under Ir catalysis and light irradiation, an N-carbamoyl-protected aniline and an α-bromocarbonyl compound could be simultaneously activated, and the two resulting radical species then recombine with each other to afford a dearomatized cyclohexadienone imine as the major product. A series of such imines with contiguous quaternary carbon centers were prepared, which can be further converted into cyclohexadienones, cyclohexadienols, and cyclohexyl amines.

Novel Electrically Conductive Cellulose Nanocrystals with a Core-Shell Nanostructure Towards Biodegradable Electronics

Electronic waste (e-waste) is the fastest growing waste stream and its negative impact on the environment and human health is major because of the toxicity and non-biodegradability of its constituents. For their biodegradability and nontoxicity, bio-based materials have been proposed as potential material candidates in the field of electronics. Among these, cellulose nanocrystals (CNCs) have many interesting properties including biodegradability, high mechanical strength, and possibility to functionalize. In terms of electrical properties, CNCs are electrically insulated, limiting their potential in electronics. This work aims to build up a poly(o-toluidine)-like shell around the CNCs to render them conductive. For this goal, the surface of the CNCs was carbamated using 2,4-toluene diisocyanate through the para-isocyanates and the ortho-isocyanates were later hydrolyzed to amine groups using HCl-acidified dimethylsulfoxide. The resultant o-toluidine-like molecules on the CNC surface were then polymerized using ammonium persulfate to form an electrically conductive shell around each CNC. The resultant CNCs were then characterized for their chemical, morphological, and electrical properties. Fourier-transform infrared analysis of the CNCs at each stage confirmed the expected chemical changes upon carbamation, hydrolysis, and polymerization and X-ray diffraction confirmed the permanence of the native crystalline structure of the CNCs. The atomic force microscopy images showed that the obtained CNCs were on average slightly thicker than the original ones, possibly due to the growth of the poly(o-toluidine) shell around them. Finally, using the four-point method, the obtained CNCs were electrically conductive with a conductivity of 0.46 S/cm. Such novel electrically conductive CNCs should have great potential in a wide range of applications including electronics, sensing, and medicine.

Exploiting poly(safranine) and poly(luminol) for sensing applications. A mini review

Sensor applications have captivated numerous scientists in the electroactivity field lately. Between toxic target analytes and biomolecules, many articles investigated the function of the obtained products in sensing utilization and the ability of applying the gained sensor in real sample tests. Safranine and luminol have a unique polymeric constructor combined with different nanomaterials and have been explored as sensors for different analytes through electrochemical and chemical techniques. This work presents the first review of poly(safranine) and poly(luminol) in sensor applications toward assorted analytes. An illustration for the two main types of oxidative polymerization synthetic methods for our targeted compounds has been displayed including chemical and electrochemical techniques. Furthermore, a comprehensive summary for their impressive impact as electrochemical sensors in the last few decades has been additionally introduced.

Safranine and luminol having a unique polymeric constructor combined with different nanomaterials were explored as sensors for different analytes through electrochemical and chemical techniques.

Recent Advances in the Removal of Organic Dyes from Aqueous Media with Conducting Polymers, Polyaniline and Polypyrrole, and Their Composites

Water pollution by organic dyes, and its remediation, is an important environmental issue associated with ever-increasing scientific interest. Conducting polymers have recently come to the forefront as advanced agents for removing dye. The present review reports on the progress represented by the literature published in 2020-2022 on the application of conducting polymers and their composites in the removal of dyes from aqueous media. Two composites, incorporating the most important polymers, polyaniline, and polypyrrole, have been used as efficient dye adsorbents or photocatalysts of dye decomposition. The recent application trends are outlined, and future uses also exploiting the electrical and electrochemical properties of conducting polymers are offered.

Silver sulfide decorated carbonaceous sawdust/ES-PANI composites as salt-resistant solar steam generator

Solar steam generation (SSG) is a potential approach for resolving the global water and energy crisis while causing the least amount of environmental damage. However, using adaptable photothermal absorbers with salt resistance through a simple, scalable, and cost-effective production approach is difficult. Herein, taking advantage of the ultra-fast water transportation in capillaries, and the large seawater storage capacity of wood, we develop a highly efficient natural evaporator. The wood wastes (sawdust) were carbonized at low temperatures to fabricate a green and low-cost carbonaceous porous material (CW). To enhance the salt resistance in high saline water, this evaporator was coated with polyaniline emeraldine salt (ES-PANI) which was synthesized through facile and cost-effective one-step oxidation of aniline. Furthermore, the composite was decorated with silver sulfide to increase the evaporation rate which reached up to 1.1 kg m⁻² h⁻¹ under 1 sun irradiation with 91.5% efficiency. Besides, the evaporator performs exceptionally well over 10 cycles due to the salt resistance capability of ES-PANI which generates a “Donnan exclusion” effect against cations in saline water. The Ag₂S@PANI/CW evaporator may be a viable large-scale generator of drinking water due to its high efficiency for energy conversion, simple and low-cost fabrication approach, salt-resistance, and durability.

Solar steam generation (SSG) is a potential approach for resolving the global water and energy crisis while causing the least amount of environmental damage.

Biomimetic Synthesis of PANI/Graphitic Oxidized Carbon Nitride for Supercapacitor Applications

Polyaniline (PANI) composites have gained momentum as supercapacitive materials due to their high energy density and power density. However, some drawbacks in their performance remain, such as the low stability after hundreds of charge-discharge cycles and limitations in the synthesis scalability. Herein, we report for the first time PANI-Graphitic oxidized carbon nitride composites as potential supercapacitor material. The biomimetic polymerization of aniline assisted by hematin, supported by phosphorous and oxygen-modified carbon nitrides (g-POCN and g-OCN, respectively), achieved up to 89% yield. The obtained PAI/g-POCN and PANI/g-OCN show enhanced electrochemical properties, such as conductivity of up to 0.0375 S/cm, specific capacitances (C_s) of up to 294 F/g (at high current densities, 5 A/g) and a stable operation after 500 charge-discharge cycles (at 3 A/g). In contrast, the biomimetic synthesis of Free PANI, assisted by stabilized hematin in cosolvents, exhibited lower performance properties (65%). Due to their structural differences, the electrochemical properties of Free PANI (conductivity of 0.0045 S/cm and C_s of up to 82 F/g at 5 A/g) were lower than those of nanostructured PANI/g-POCN and g-OCN supports, which provide stability and improve the properties of biomimetically synthesized PANI. This work reveals the biomimetic synthesis of PANI, assisted by hematin supported by modified carbon nitrides, as a promising strategy to produce nanostructured supercapacitors with high performance.

Copper-Catalyzed Synthesis of Functionalized Aryl Sulfonamides from Sodium Sulfinates in Green Solvents

Functionalized aryl sulfonamides are important building blocks in the pharmaceutical industry. A one-step synthesis catalyzed by a copper salt was developed using stable solid commodity chemicals in sulfolane or, alternatively, in green solvents such as γ-valerolactone, iPrOAc, or nBuOAc with acetic acid. The method tolerated diverse functional groups commonly presented in current medicines and drug intermediates. The mechanistic study showed a radical coupling pathway between the sulfonyl and anilinium radicals through the use of K₂S₂O₈ and copper catalyst, respectively.

Polymerization of aniline hydrochloride in reverse of microemulsion by batch and semicontinuous process using ionic and nonionic surfactants

The polymerization of aniline hydrochloride by inverse microemulsion in a batch process and the semicontinuous process was studied as a function of the surfactant ionic and nonionic. Polymerizations were carried out at 60°C for 4 h with a yield polymer of circa 67 and 27% wt. for ionic and nonionic surfactants. The conductivity of synthesized polyaniline by the semicontinuous process is higher up to three orders of magnitude than that of the batch process for both surfactants. The calculating degree of oxidation by UV-Vis showed the relative intensities of the quinoid to benzenoid unit around one. The morphology was determined by Scanning Electron Microscopy (SEM) and observed that the formation of the different morphologies is due to the self-assembly behavior of surfactant. The diameter z-average particle size (Dz) was studied by Transmission Electron Microscopy (TEM), which determined that the diameter particle in a semicontinuous state is larger than the one produced in a batch; this is due to the control of monomer addition in the system. These findings suggest that the polymerization process and the type of surfactant influence the properties of polyaniline.

Circular Discovery in Small Molecule and Conjugated Polymer Synthetic Methodology

Simple and efficient methods are a key consideration for small molecule and polymer syntheses. Direct arylation polymerization (DArP) is of increasing interest for preparing conjugated polymers as an effective approach compared to conventional cross-coupling polymerizations. As DArP sees broader utilization, advancements are needed to access materials with improved properties and different monomer structures and to improve the scalability of conjugated polymer synthesis. Presented herein are considerations for developing new methods of conjugated polymer synthesis from small molecule transformations, exploring how DArP has successfully used this approach, and presenting how emerging polymerization methodologies are developing similarly. While it is common to adapt small molecule methods to polymerizations, we demonstrate the ways in which information gained from studying polymerizations can inform and inspire greater advancements in small molecule transformations. This circular approach to organic synthetic method development underlines the value of collaboration between small molecule and polymer-based synthetic research groups.

Starch/Polyaniline Biopolymer Film as Potential Intelligent Food Packaging with Colourimetric Ammonia Sensor

The use of petroleum-based plastics in food packaging leads to various environmental impacts, while spoilage of food and misinterpretation of food-date labelling account for food insecurity; therefore, a biopolymer capable of indicating food edibility is prepared to resolve these issues. In this research, starch/polyaniline (starch/PANI) biopolymer film was synthesised and investigated as an ammonia sensor for potential application as intelligent food packaging. FT-IR and XRD were used to confirm the composition of the biopolymer films, while UV-Vis spectrometry was applied to identify the oxidation state of PANI in emeraldine form. PANI was successfully incorporated into the starch matrix, leading to better thermal stability (TGA) but decreasing the crystallinity of the matrix (DSC). The performance of the polymer-film sensor was determined through ammonia-vapour sensitivity analysis. An obvious colour change from green to blue of starch/PANI films was observed upon exposure to the ammonia vapour. Starch/PANI 0.4% is the optimum composition, having the best sensor performance with good linearity (R2 = 0.9459) and precision (RSD = 8.72%), and exhibiting excellent LOD (245 ppm). Furthermore, the starch/PANI films are only selective to ammonia. Therefore, the starch/PANI films can be potentially applied as colourimetric ammonia sensors for intelligent food packaging.

Semi-Polycrystalline–Polyaniline Empowered Electrochemical Capacitor

We report on the formation of semi-polycrystalline polyaniline, a novel electroactive polymeric material synthesized by a modified surfactant-free chemical route and its enhanced electrochemical capacitive behavior. The material exhibits uniformly arranged spindle-shaped morphology in scanning electron microscopy and well-defined crystallographic lattices in the high-resolution transmission electron microscopy images. The X-ray diffraction spectrum reveals sharp peaks characteristic of a crystalline material. The characteristic chemical properties of polyaniline are recorded using Fourier transform infrared technology and laser Raman spectroscopies. The cyclic voltammetry curves exhibit features of surface-redox pseudocapacitance. The specific capacitance calculated for the material is 551 F g−1 at a scan rate of 10 mV s−1. The cycle stability and the coulombic efficiency recorded at a current density of 12 A g−1 exhibited good stability (90.3% and 99.5%, respectively) over 3000 cycles.

A Reversible Plasmonic Nanoprobe for Dynamic Imaging of Intracellular pH during Endocytosis

Understanding the pH evolution during endocytosis is essential for our comprehension of the fundamental processes of biology as well as effective nanotherapeutic design. Herein, we constructed a plasmonic Au@PANI core-shell...

Rh2(II)-Catalyzed Intermolecular N-Aryl Aziridination of Olefins Using Nonactivated N Atom Precursors

The development of the first intermolecular Rh₂(II)-catalyzed aziridination of olefins using anilines as nonactivated N atom precursors and an iodine(III) reagent as the stoichiometric oxidant is reported. This reaction requires the transfer of an N-aryl nitrene fragment from the iminoiodinane intermediate to a Rh₂(II) carboxylate catalyst; in the absence of a catalyst only diaryldiazene formation was observed. This N-aryl aziridination is general and can be successfully realized by using as little as 1 equiv of the olefin. Di-, tri-, and tetrasubstituted cyclic or acylic olefins can be employed as substrates, and a range of aniline and heteroarylamine N atom precursors are tolerated. The Rh₂(II)-catalyzed N atom transfer to the olefin is stereospecific as well as chemo- and diastereoselective to produce the N-aryl aziridine as the only amination product. Because the chemistry of nonactivated N-aryl aziridines is underexplored, the reactivity of N-aryl aziridines was explored toward a range of nucleophiles to stereoselectively access privileged 1,2-stereodiads unavailable from epoxides, and removal of the N-2,4-dinitrophenyl group was demonstrated to show that functionalized primary amines can be constructed.

Unveiling the Actual Catalytic Sites in Nanozyme-Catalyzed Oxidation of o-Phenylenediamine

Nanozymes have offered remarkable advantages over natural enzymes and found widespread applications including biosensors, immunoassays, nanomedicines, and environmental remediation. Oxidation of o-phenylenediamine (OPD) by nanozymes has been listed as a standard protocol for determining nanozyme activities. Given the complexity of OPD oxidation processes, however, the mechanism of nanozyme-catalyzed oxidation of OPD remains elusive. In this report, mechanistic studies of nanozyme-catalyzed oxidation of OPD are performed and a distinguishably different mechanism from that of natural enzymes is found. A combination of Fourier transform infrared spectroscopy, nuclear magnetic resonance, electrospray ionization mass spectrometry, and electron microscopic studies provides compelling evidence that polymerization of OPD occurs on the surface of several different nanozymes. The unexpected polymerization causes a dense coating layer of poly(o-phenylenediamine) (POPD) on nanozymes renders the intrinsic properties of nanozymes. Therefore, this fundamental discovery raise serious concerns using OPD-based colorimetric method for determining nanozyme activities. Without examining the surface change of nanozymes after catalytic reactions, the use of OPD-based colorimetric method for determining nanozyme activities is strongly discouraged. Furthermore, POPD is discovered as a new oxidase mimic, and this new mechanism also provides a general and robust method to coat nanomaterials with POPD polymers of enzyme-mimicking properties.

The Role of Alkyl Chain Length and Halide Counter Ion in Layered Dion-Jacobson Perovskites with Aromatic Spacers

Layered hybrid perovskites based on Dion-Jacobson phases are of interest to various optoelectronic applications. However, the understanding of their structure-property relationships remains limited. Here, we present a systematic study of Dion-Jacobson perovskites based on (S)PbX₄ (n = 1) compositions incorporating phenylene-derived aromatic spacers (S) with different anchoring alkylammonium groups and halides (X = I, Br). We focus our study on 1,4-phenylenediammonium (PDA), 1,4-phenylenedimethylammonium (PDMA), and 1,4-phenylenediethylammonium (PDEA) spacers. Systems based on PDA did not form a well-defined layered structure, showing the formation of a 1D structure instead, whereas the extension of the alkyl chains to PDMA and PDEA rendered them compatible with the formation of a layered structure, as shown by X-ray diffraction and solid-state NMR spectroscopy. In addition, the control of the spacer length affects optical properties and environmental stability, which is enhanced for longer alkyl chains and bromide compositions. This provides insights into their design for optoelectronic applications.

Polyaniline/Biopolymer Composite Systems for Humidity Sensor Applications: A Review

The development of polyaniline (PANI)/biomaterial composites as humidity sensor materials represents an emerging area of advanced materials with promising applications. The increasing attention to biopolymer materials as desiccants for humidity sensor components can be explained by their sustainability and propensity to absorb water. This review represents a literature survey, covering the last decade, which is focused on the interrelationship between the core properties and moisture responsiveness of multicomponent polymer/biomaterial composites. This contribution provides an overview of humidity-sensing materials and the corresponding sensors that emphasize the resistive (impedance) type of PANI devices. The key physicochemical properties that affect moisture sensitivity include the following: swelling, water vapor adsorption capacity, porosity, electrical conductivity, and enthalpies of adsorption and vaporization. Some key features of humidity-sensing materials involve the response time, recovery time, and hysteresis error. This work presents a discussion on various types of humidity-responsive composite materials that contain PANI and biopolymers, such as cellulose, chitosan and structurally related systems, along with a brief overview of carbonaceous and ceramic materials. The effect of additive components, such as polyvinyl alcohol (PVA), for film fabrication and their adsorption properties are also discussed. The mechanisms of hydration and proton transfer, as well as the relationship with conductivity is discussed. The literature survey on hydration reveals that the textural properties (surface area and pore structure) of a material, along with the hydrophile-lipophile balance (HLB) play a crucial role. The role of HLB is important in PANI/biopolymer materials for understanding hydration phenomena and hydrophobic effects. Fundamental aspects of hydration studies that are relevant to humidity sensor materials are reviewed. The experimental design of humidity sensor materials is described, and their relevant physicochemical characterization methods are covered, along with some perspectives on future directions in research on PANI-based humidity sensors.

Enhanced Storage Performance of PANI and PANI/Graphene Composites Synthesized in Protic Ionic Liquids

Polyaniline (PANI) was synthesized using oxidative polymerization in a mixture of water with pyrrolidinium hydrogen sulfate [Pyrr][HSO₄], which is a protic ionic liquid PIL. The obtained PANI (PANI/PIL) was compared with conventional PANI (PANI/HCl and PANI/HSO₄) in terms of their morphological, structural, and storage properties. The results demonstrate that the addition of this PIL to a polymerization medium leads to a fiber-like morphology, instead of a spherical-like morphology, of PANI/HSO₄ or an agglomerated morphology of PANI/HCl. In addition, PAN/PIL exhibits an improvement of the charge transfer kinetic and storage capability in H₂SO₄ 1 mol·L^-1, compared to PANI/HCl. The combination of PANI/PIL and graphene oxide (GO), on the other hand, was investigated by optimizing the PANI/GO weight ratio to achieve the nanocomposite material with the best performance. Our results indicate that the PANI/PIL/GO containing 16 wt% of GO material exhibits a high performance and stability (223 F·g^-1 at 10 A·g^-1 in H₂SO₄ 1 mol·L^-1, 4.9 Wh·Kg^-1, and 3700 W·Kg^-1 @ 10 A·g^-1). The obtained results highlight the beneficial role of PIL in building PANI and PANI/GO nanocomposites with excellent performances for supercapacitor applications.

One-step synthesis, characterization and properties of novel hybrid electromagnetic nanomaterials based on polydiphenylamine and Co-Fe particles in the absence and presence of single-walled carbon nanotubes

A one-step preparation method for hybrid electromagnetic nanomaterials based on polydiphenylamine (PDPA) and bimetallic Co-Fe particles in the absence and presence of single-walled carbon nanotubes (SWCNT) was proposed. During IR heating of PDPA in the presence of Co(ii) and Fe(iii) salts in an inert atmosphere at T = 450-600 °C, the polycondensation of diphenylamine (DPA) oligomers and dehydrogenation of phenyleneamine units of the polymer with the formation of C[double bond, length as m-dash]N bonds and reduction of metals by evolved hydrogen with the formation of bimetallic Co-Fe particles dispersed in a polymer matrix occur simultaneously. When carbon nanotubes are introduced into the reaction system, a nanocomposite material is formed, in which bimetallic Co-Fe particles immobilized on SWCNT are distributed in the matrix of the polymer. According to XRD data, reflection peaks of bimetallic Co-Fe particles at diffraction scattering angles 2θ = 69.04° and 106.5° correspond to a solid solution based on the fcc-Co crystal lattice. According to SEM and TEM data, a mixture of particles with sizes of 8-30 nm and 400-800 nm (Co-Fe/PDPA) and 23-50 nm and 400-1100 nm (Co-Fe/SWCNT/PDPA) is formed in the nanocomposites. The obtained multifunctional Co-Fe/PDPA and Co-Fe/SWCNT/PDPA nanomaterials demonstrate good thermal, electrical and magnetic properties. The saturation magnetization of the nanomaterials is M S = 14.99-31.32 emu g-1 (Co-Fe/PDPA) and M S = 29.48-48.84 emu g-1 (Co-Fe/SWCNT/PDPA). The electrical conductivity of the nanomaterials reaches 3.5 × 10-3 S cm-1 (Co-Fe/PDPA) and 1.3 S cm-1 (Co-Fe/SWCNT/PDPA). In an inert medium, at 1000 °C the residue is 71-77%.

Effective tetracycline removal from liquid streams of dairy manure via hierarchical poly (vinyl alcohol-co-ethylene)/polyaniline metal complex nanofibrous membranes

Antibiotic residues from animal wastes enter underground and surface water streams, posing high risks to public health. Novel technologies capable of removing the residues from the matrix of concern such as animal waste should be developed. This research investigates the development of nanofiber absorbent for removing tetracycline (TC) antibiotic residues from liquid streams of dairy manure produced in a typical dairy farm. Hierarchically structured nanofibrous adsorbent was developed through growing a uniform polyaniline (PAni) nanodots on poly (vinyl alcohol-co-ethylene) (EVOH) nanofiber membrane (NFM). Moreover, Cu²⁺ ions were chelated on the developed EVOH/PAni-Cl NFM to improve TC adsorption efficiency and selectivity. The TC adsorption capacities of EVOH/PAni-Cl-Cu²⁺ and EVOH/PAni-Cl) NFM were 1100 mg g^-1 and 600 mg g^-1 within 120 min., respectively. The NFMs adsorption efficiency was investigated using dairy wastewater. Initial TC concentrations in dairy wastewater sample varied between 20 and 50 ppm. The EVOH/PAni-Cl-Cu²⁺ NFM showed TC removal of 86% from dairy manure samples at 25 ppm initial TC concentration within 60 min. during batch mode treatment. Results showed that the dynamic binding efficiency of 450 mg g^-1 can be achieved at an initial TC concentration of 50 ppm. Furthermore, the NFM displayed efficient chemical and physical stability even after 8 cycles of reusing without significant changes in its performance or hazardous Cu²⁺ leaching.

Effect of face-to-face and side-to-side interchain interactions on the electron transport in emeraldine salt polyaniline

Polyaniline (PANI) is a conductive polymer that has been studied intensively due to its high conductivity, ease of synthesis, fascinating doping mechanism, and a broad spectrum of applications. Polyaniline doped HCl was synthesized by a common direct-oxidation method of aniline using ammonium persulfate as the oxidant in HCl solution at various temperatures. This study focused on conductivity alteration of PANI-ES (emeraldine salt) due to the interchain interaction observed at different reaction temperatures from room temperature down to -15 °C. The molecular structure of PANI-ES was determined by FTIR and Raman spectroscopy. At low reaction temperature, the electronic transport properties improve significantly as reflected by its conductivity. X-ray diffraction (XRD) analysis shows that the value d_{(110)} and β play an important role in electron transport through face-to-face and side-to-side interactions, respectively. Scanning electron microscopy (SEM) analysis shows that the morphology of the synthesized PANI-ES consists of granules that are interconnected by nanofibers. Here, the correlation between electronic transport properties, structure, and morphology induced by reaction temperature was analyzed and discussed in detail. Moreover, PANI ES synthesized at 0 °C was applied as an electrocatalytic active layer in the DSSC's counter-electrode with a promising result.

Possible competitive modes of decarboxylation in the annulation reactions of ortho-substituted anilines and arylglyoxylates

Annulation reactions of ortho-substituted anilines and arylglyoxylates to the tandem synthesis of nitrogen heterocycles in the presence of K₂S₂O₈ have been investigated, which occur via decarboxylation before or after the reaction with anilines.

Semiflexible polymer scaffolds: an overview of conjugation strategies

Semiflexible polymers are excellent scaffolds for the presentation of a wide variety of (bio)molecules. This manuscript reviews advantages and challenges of the most common conjugation strategies for the major classes of semiflexible polymers.

A Novel Approach for Effective Alteration of Morphological Features of Polyaniline through Interfacial Polymerization for Versatile Applications

Morphological characteristics of any nanomaterial are critical in defining its properties. In this context, a method to control morphological parameters of polyaniline (PANI) has been investigated by producing its composite with gold nanoparticles (AuNPs). Herein, we report for the first time the successful control on the physical/chemical properties of PANI composites synthesized via interfacial polymerization through functionalization of its AuNP composite component with citrate, ascorbate, glutathione (GSH), and cetyl trimethyl ammonium bromide (CTAB). A significant difference in the polymerization pattern, morphologies, and electrical properties was recognized in these composites according to the functionality of the modified AuNPs. The obtained composites of AuNPs/PANI exhibited highly diverse morphologies (e.g., nodule, hollow hemisphere, flake, and spider-web galaxy type) and electrical characteristics according to functionalization. Hence, this study is expected to offer better insight into control of the polymerization pattern of AuNP/PANI composites and their associated properties.

Self-Assembly and Cascade Catalysis by a Soft-Oxometalate (SOM) System

Cascade catalysis has gained importance due to its various applications. In this work, cascade catalysis was performed using a self-assembled soft-oxometalate (SOM) as a model system. At first, we synthesized an oxometalate (OM) hybrid with a polymerizable organic cation, namely tetrakis(4-aminophenyl)methane, and an OM, K8[SiW11O39]. The hybrid in turn was converted into SOM in water, DMSO mixture, and characterized by different techniques, ranging from electron microscopy to DLS. The SOM state is endowed with the ability to polymerize the aniline based counter ions associated with it in the presence of UV-light. This polymerization is possible due to the presence of photocatalytic OMs (oxometalates) in the SOMs. The polymer-SOM hybrid in cascade oxidizes selectively aniline to nitrobenzene and nitrite to nitrate owing to the residual oxidizing property of the OM constituents in it. This is the first example of cascade catalysis in SOM chemistry.

Preparation of Hybrid Polyaniline/Nanoparticle Membranes for Water Treatment Using an Inverse Emulsion Polymerization Technique under Sonication

This manuscript describes a novel in situ interfacial dynamic inverse emulsion polymerization process under sonication of aniline in the presence of carbon nanotubes (CNT) and graphene nanoparticles in ethanol. This polymerization method is simple and very rapid (up to 10 min) compared to other techniques reported in the literature. During polymerization, the nanoparticles are coated with polyaniline (PANI), forming a core-shell structure, as confirmed by high-resolution scanning electron microscopy (HRSEM) and Fourier-Transform Infrared (FTIR) measurements. The membrane pore sizes range between 100–200 nm, with an average value of ~119 ± 28.3 nm. The film resistivity decreased when treated with alcohol, and this behavior was used for selection of the most efficient alcohol as a solvent for this polymerization technique. The membrane permeability of the PANI grafted CNT was lower than the CNT reference, thus demonstrating better membranal properties. As measured by water permeability, these are ultrafiltration membranes. An antimicrobial activity test showed that whereas the reference nanoparticle Bucky paper developed a large bacterial colony, the PANI grafted CNT sample had no bacterial activity. The thicker, 2.56 mm membranes exhibited high salt removal properties at a low pressure drop. Such active membranes comprise a novel approach for future water treatment applications.

Deposition Behavior of Polyaniline on Carbon Nanofibers by Oxidative Chemical Vapor Deposition

Oxidative chemical vapor deposition (oCVD) offers unique advantages as a liquid-free processing technique in synthesizing and integrating conducting polymers, including polyaniline (PANI), by enabling conformal coatings onto nanostructured substrates, like carbon nanofibers. With relatively thick nanofiber mats, the challenge is to ensure uniform coating thickness through the porous substrates. Here, the substrate temperature during oCVD is found to be a primary factor influencing PANI coating uniformity. Coating uniformity is enhanced by operating at a higher substrate temperature, where monomer adsorption is believed to be limiting relative to intrinsic reaction kinetics. Also, a higher substrate temperature leads to significantly less PANI oligomers and more PANI in the emeraldine oxidation state. A systematic study of oCVD kinetics with substrate temperature shows a reaction-limited regime at lower substrate temperatures with an activation energy of 12.0 kJ/mol, which is believed to be controlled by the self-catalyzed PANI polymerization reaction that transitions at higher substrate temperatures above 90 °C to an adsorption-limited regime as indicated by a negative activation energy of -18.8 kJ/mol. Overall, by operating within an adsorption-limited oCVD regime, more uniform oCVD PANI coatings on electrospun carbon nanofiber mats have been achieved.