Preparation of nanosize polyaniline by solid-state polymerization and determination of crystal structure

Head-to-Tail and Head-to-Head Molecular Chains of Poly(p-Anisidine): Combined Experimental and Theoretical Evaluation

Poly(p-anisidine) (PPA) is a polyaniline derivative presenting a methoxy (-OCH3) group at the para position of the phenyl ring. Considering the important role of conjugated polymers in novel technological applications, a systematic, combined experimental and theoretical investigation was performed to obtain more insight into the crystallization process of PPA. Conventional oxidative polymerization of p-anisidine monomer was based on a central composite rotational design (CCRD). The effects of the concentration of the monomer, ammonium persulfate (APS), and HCl on the percentage of crystallinity were considered. Several experimental techniques such as X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), multifractal analysis, Nuclear Magnetic Resonance (13C NMR), Fourier-transform Infrared spectroscopy (FTIR), and complex impedance spectroscopy analysis, in addition to Density Functional Theory (DFT), were employed to perform a systematic investigation of PPA. The experimental treatments resulted in different crystal structures with a percentage of crystallinity ranging from (29.2 ± 0.6)% (PPA1HT) to (55.1 ± 0.2)% (PPA16HT-HH). A broad halo in the PPA16HT-HH pattern from 2θ = 10.0-30.0° suggested a reduced crystallinity. Needle and globular-particle morphologies were observed in both samples; the needle morphology might have been related to the crystalline contribution. A multifractal analysis showed that the PPA surface became more complex when the crystallinity was reduced. The proposed molecular structures of PPA were supported by the high-resolution 13C NMR results, allowing us to access the percentage of head-to-tail (HT) and head-to-head (HH) molecular structures. When comparing the calculated and experimental FTIR spectra, the most pronounced changes were observed in ν(C-H), ν(N-H), ν(C-O), and ν(C-N-C) due to the influence of counterions on the polymer backbone as well as the different mechanisms of polymerization. Finally, a significant difference in the electrical conductivity was observed in the range of 1.00 × 10-9 S.cm-1 and 3.90 × 10-14 S.cm-1, respectively, for PPA1HT and PPA16HT-HH.

PANI-WO3·2H2O Nanocomposite: Phase Interaction and Evaluation of Electronic Properties by Combined Experimental Techniques and Ab-Initio Calculation

The development of conjugated polymer-based nanocomposites by adding metallic particles into the polymerization medium allows the proposition of novel materials presenting improved electrical and optical properties. Polyaniline Emeraldine-salt form (ES-PANI) has been extensively studied due to its controllable electrical conductivity and oxidation states. On the other hand, tungsten oxide (WO3) and its di-hydrated phases, such as WO3·2H2O, have been reported as important materials in photocatalysis and sensors. Herein, the WO3·2H2O phase was directly obtained during the in-situ polymerization of aniline hydrochloride from metallic tungsten (W), allowing the formation of hybrid nanocomposites based on its full oxidation into WO3·2H2O. The developed ES-PANI-WO3·2H2O nanocomposites were successfully characterized using experimental techniques combined with Density Functional Theory (DFT). The formation of WO3·2H2O was clearly verified after two hours of synthesis (PW2 nanocomposite), allowing the confirmation of purely physical interaction between matrix and reinforcement. As a result, increased electrical conductivity was verified in the PW2 nanocomposite: the DFT calculations revealed a charge transfer from the p-orbitals of the polymeric phase to the d-orbitals of the oxide phase, resulting in higher conductivity when compared to the pure ES-PANI.

The mechanochemical synthesis of polymers

Mechanochemistry - the utilization of mechanical forces to induce chemical reactions - is a rarely considered tool for polymer synthesis. It offers numerous advantages such as reduced solvent consumption, accessibility of novel structures, and the avoidance of problems posed by low monomer solubility and fast precipitation. Consequently, the development of new high-performance materials based on mechanochemically synthesised polymers has drawn much interest, particularly from the perspective of green chemistry. This review covers the constructive mechanochemical synthesis of polymers, starting from early examples and progressing to the current state of the art while emphasising linear and porous polymers as well as post-polymerisation modifications.

Nanofibers of Polyaniline and Cu(II)-l-Aspartic Acid for a Room-Temperature Carbon Monoxide Gas Sensor

In the present study, the carbon monoxide (CO) sensing property of Cu(II)-l-aspartic acid nanofibers/polyaniline (PANI) nanofibers composite was investigated at room temperature. The nanofiber composite was formed through the ultrasound mixing of emeraldine salt PANI nanofibers and Cu(II)-l-aspartic acid nanofibers, which were synthesized by using a polymerization process and simple self-assembly method, respectively. The nanofibers composite demonstrated a branched structure in which the Cu(II)-l-aspartic acid nanofiber framework is similar to the trunk of a tree and the polyaniline nanofibers is like its branches. It seems that this special structure and one-dimension/one-dimension interface are suitable for gas adsorption and sensing. The performance of the prepared sensor toward CO gas was investigated at room temperature in a wide concentration range (200-8000 ppm). The experimental results indicate that the incorporation of amino acid-based copper metal-biomolecule framework nanofibers to PANI nanofibers enhances the response value (12.41% to 4000 ppm), yielding good selectivity and acceptable response and recovery characteristics (220 s/240 s) at room temperature. The detection limit of Cu(II)-l-aspartic acid nanofibers/PANI nanofibers sensor for carbon monoxide is obtained at 120 ppm.

Carboxymethyl Cellulose (CMC) as a Template for Laccase-Assisted Oxidation of Aniline

Polyaniline (PANi) is a conducting polymer which has been subject of intensive research on the exploitation of new products and applications. The main aim of the work is the development of a conductive bacterial cellulose (BC)-based material by enzymatic-assisted polymerization of aniline. For this, we study the role of carboxymethyl cellulose (CMC) as a template for the in situ polymerization of aniline. Bacterial cellulose was used as the supporting material for the entrapment of CMC and for the in situ oxidation reactions. The amount of CMC entrapped inside BC was optimized as well as the conditions for laccase-assisted oxidation of aniline. The new oligomers were evaluated by spectrometric techniques, namely 1H NMR and MALDI-TOF, and the functionalized BC surfaces were analyzed by thermogravimetric analysis (TGA), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscope (SEM), and reflectance spectrophotometry. The conductivity of the developed materials was evaluated using the four-probe methodology. The oligomers obtained after reaction in the presence of CMC as template display a similar structure as when the reaction is conducted only in BC. Though, after oxidation in the presence of this template, the amount of oligomers entrapped inside BC/CMC is considerably higher conferring to the material greater electrical conductivity and coloration. The use of CMC as a template for aniline oxidation on BC seems to be a promising and cheap strategy to improve the yield of functionalization and increment the properties of the materials, namely electrical conductivity and coloration.

Some Important Issues of the Commercial Production of 1-D Nano-PANI

One-dimensional polyaniline nano-materials (1-D nano-PANI) have great promise applications in supercapacitors, sensors and actuators, electrochromic devices, anticorrosive coatings, and other nanometer devices. Consequently, commercial production of 1-D nano-PANI at large-scale needs to be quickly developed to ensure widespread usage of this material. Until now, approaches-including hard template methods, soft template methods, interfacial polymerization, rapid mixing polymerization, dilute polymerization, and electrochemical polymerization-have been reported to be used to preparation of this material. Herein, some important issues dealing with commercial production of 1-D nano-PANI are proposed based on the complexity of the synthetic process, its characters, and the aspects of waste production and treatment in particular. In addition, potential solutions to these important issues are also proposed.