Hierarchy of hybrid materials. Part-II: The place of organics-on-inorganics in it, their composition and applications

Hybrid materials or hybrids incorporating organic and inorganic constituents are emerging as a very potent and promising class of materials due to the diverse but complementary nature of their properties. This complementarity leads to a perfect synergy of properties of the desired materials and products as well as to an extensive range of their application areas. Recently, we have overviewed and classified hybrid materials describing inorganics-in-organics in Part-I (Saveleva, et al., Front. Chem., 2019, 7, 179). Here, we extend that work in Part-II describing organics-on-inorganics, i.e., inorganic materials modified by organic moieties, their structure and functionalities. Inorganic constituents comprise of colloids/nanoparticles and flat surfaces/matrices comprise of metallic (noble metal, metal oxide, metal-organic framework, magnetic nanoparticles, alloy) and non-metallic (minerals, clays, carbons, and ceramics) materials; while organic additives can include molecules (polymers, fluorescence dyes, surfactants), biomolecules (proteins, carbohydtrates, antibodies and nucleic acids) and even higher-level organisms such as cells, bacteria, and microorganisms. Similarly to what was described in Part-I, we look at similar and dissimilar properties of organic-inorganic materials summarizing those bringing complementarity and composition. A broad range of applications of these hybrid materials is also presented whose development is spurred by engaging different scientific research communities.

A decade of developing applications exploiting the properties of polyelectrolyte multilayer capsules

Transferring the layer-by-layer (LbL) coating approach from planar surfaces to spherical templates and subsequently dissolving these templates leads to the fabrication of polyelectrolyte multilayer capsules. The versatility of the coatings of capsules and their flexibility upon bringing in virtually any material into the coatings has quickly drawn substantial attention. Here, we provide an overview of the main developments in this field, highlighting the trends in the last decade. In the beginning, various methods of encapsulation and release are discussed followed by a broad range of applications, which were developed and explored. We also outline the current trends, where the range of applications is continuing to grow, including addition of whole new and different application areas.

Fabrication and characterization of core-shell microparticles containing an aqueous core

Core-shell microparticles containing an aqueous core have demonstrated their value for microencapsulation and drug delivery systems. The most important step in generating these uniquely structured microparticles is the formation of droplets and double emulsion. The droplet generator must meet the performance and reliability requirements, including accurate size control with tunability and monodispersity. Herein, we present a facile technique to generate surfactant-free core-shell droplets with an aqueous core in a microfluidic device. We demonstrate that the geometry of the core-shell droplets can be precisely adjusted by the flow rates of the droplet components. As the shell is polymerized after the formation of the core-shell droplets, the resulting solid microparticles ensure the encapsulation of the aqueous core and prevent undesired release. We then study experimentally and theoretically the behaviour of resultant microparticles under heating and compression. The microparticles demonstrate excellent stability under both thermal and mechanical loads. We show that the rupture force can be quantitatively predicted from the shell thickness relative to the outer shell radius. Experimental results and theoretical predictions confirm that the rupture force scales directly with the shell thickness.

Nanoarchitectonics beyond perfect order - not quite perfect but quite useful

Nanoarchitectonics, like architectonics, allows the design and building of structures, but at the nanoscale. Unlike those in architectonics, and even macro-, micro-, and atomic-scale architectonics, the assembled structures at the nanoscale do not always follow the projected design. In fact, they do follow the projected design but only for self-assembly processes producing structures with perfect order. Here, we look at nanoarchitectonics allowing the building of nanostructures without a perfect arrangement of building blocks. Here, fabrication of structures from molecules, polymers, nanoparticles, and nanosheets to polymer brushes, layer-by-layer assembly structures, and hydrogels through self-assembly processes is discussed, where perfect order is not necessarily the aim to be achieved. Both planar substrate and spherical template-based assemblies are discussed, showing the challenging nature of research in this field and the usefulness of such structures for numerous applications, which are also discussed here.

Modification of Surfaces with Vaterite CaCO3 Particles

Former studies have demonstrated a strong interest toward the crystallization of CaCO₃ polymorphs in solution. Nowadays, CaCO₃ crystallization on solid surfaces is extensively being studied using biomolecules as substrates for the control of the growth aiming at various applications of CaCO₃. Calcium carbonate exists in an amorphous state, as three anhydrous polymorphs (aragonite, calcite and vaterite), and as two hydrated polymorphs (monohydrocalcite and ikaite). The vaterite polymorph is considered as one of the most attractive forms due to its large surface area, biocompatibility, mesoporous nature, and other features. Based on physical or chemical immobilization approaches, vaterite can be grown directly on solid surfaces using various (bio)molecules, including synthetic polymers, biomacromolecules such as proteins and peptides, carbohydrates, fibers, extracellular matrix components, and even biological cells such as bacteria. Herein, the progress on the modification of solid surfaces by vaterite CaCO₃ crystals is reviewed, focusing on main findings and the mechanism of vaterite growth initiated by various substances mentioned above, as well as the discussion of the applications of such modified surfaces.

The influence of Ca/Mg ratio on autogelation of hydrogel biomaterials with bioceramic compounds

Hydrogels, which are versatile three-dimensional structures containing polymers and water, are very attractive for use in biomedical fields, but they suffer from rather weak mechanical properties. In this regard, biocompatible particles can be used to enhance their mechanical properties. The possibility of loading such particles with drugs (e.g. enzymes) makes them a particularly useful component in hydrogels. In this study, micro/nanoparticles containing various ratios of Ca²⁺/Mg²⁺ with sizes ranging from 1 to 8 μm were prepared and mixed with gellan gum (GG) solution to study the in-situ formation of hydrogel-particle composites. The particles provide multiple functionalities: 1) they efficiently crosslink GG to induce hydrogel formation through the release of the divalent cations (Ca²⁺/Mg²⁺) known to bind to GG polymer chains; 2) they enhance mechanical properties of the hydrogel from 2 up to 100 kPa; 3) the samples most efficiently promoting cell growth were found to contain two types of minerals: vaterite and hydroxymagnesite, which enhanced cells proliferation and hydroxyapatite formation. The results demonstrate that such composite materials are attractive candidates for applications in bone regeneration.

Nanoparticles in Polyelectrolyte Multilayer Layer-by-Layer (LbL) Films and Capsules—Key Enabling Components of Hybrid Coatings

Originally regarded as auxiliary additives, nanoparticles have become important constituents of polyelectrolyte multilayers. They represent the key components to enhance mechanical properties, enable activation by laser light or ultrasound, construct anisotropic and multicompartment structures, and facilitate the development of novel sensors and movable particles. Here, we discuss an increasingly important role of inorganic nanoparticles in the layer-by-layer assembly—effectively leading to the construction of the so-called hybrid coatings. The principles of assembly are discussed together with the properties of nanoparticles and layer-by-layer polymeric assembly essential in building hybrid coatings. Applications and emerging trends in development of such novel materials are also identified.

Layer-By-Layer Assemblies of Biopolymers: Build-Up, Mechanical Stability and Molecular Dynamics

Rapid development of versatile layer-by-layer technology has resulted in important breakthroughs in the understanding of the nature of molecular interactions in multilayer assemblies made of polyelectrolytes. Nowadays, polyelectrolyte multilayers (PEM) are considered to be non-equilibrium and highly dynamic structures. High interest in biomedical applications of PEMs has attracted attention to PEMs made of biopolymers. Recent studies suggest that biopolymer dynamics determines the fate and the properties of such PEMs; however, deciphering, predicting and controlling the dynamics of polymers remains a challenge. This review brings together the up-to-date knowledge of the role of molecular dynamics in multilayers assembled from biopolymers. We discuss how molecular dynamics determines the properties of these PEMs from the nano to the macro scale, focusing on its role in PEM formation and non-enzymatic degradation. We summarize the factors allowing the control of molecular dynamics within PEMs, and therefore to tailor polymer multilayers on demand.

Polymer- and Hybrid-Based Biomaterials for Interstitial, Connective, Vascular, Nerve, Visceral and Musculoskeletal Tissue Engineering

In this review, materials based on polymers and hybrids possessing both organic and inorganic contents for repairing or facilitating cell growth in tissue engineering are discussed. Pure polymer based biomaterials are predominantly used to target soft tissues. Stipulated by possibilities of tuning the composition and concentration of their inorganic content, hybrid materials allow to mimic properties of various types of harder tissues. That leads to the concept of "one-matches-all" referring to materials possessing the same polymeric base, but different inorganic content to enable tissue growth and repair, proliferation of cells, and the formation of the ECM (extra cellular matrix). Furthermore, adding drug delivery carriers to coatings and scaffolds designed with such materials brings additional functionality by encapsulating active molecules, antibacterial agents, and growth factors. We discuss here materials and methods of their assembly from a general perspective together with their applications in various tissue engineering sub-areas: interstitial, connective, vascular, nervous, visceral and musculoskeletal tissues. The overall aims of this review are two-fold: (a) to describe the needs and opportunities in the field of bio-medicine, which should be useful for material scientists, and (b) to present capabilities and resources available in the area of materials, which should be of interest for biologists and medical doctors.

Hybrids of Polymer Multilayers, Lipids, and Nanoparticles: Mimicking the Cellular Microenvironment

Here we address research directions and trends developed following novel concepts in 2D/3D self-assembled polymer structures established in the department led by Helmuth Möhwald. These functional structures made of hybrids of polymer multilayers, lipids, and nanoparticles stimulated research in the design of the cellular microenvironment. The composition of the extracellular matrix (ECM) and dynamics of biofactor presentation in the ECM can be recapitulated by the hybrids. Proteins serve as models for protein-based biofactors such as growth factors, cytokines, hormones, and so forth. A fundamental understanding of complex intermolecular interactions and approaches developed for the externally IR-light-triggered release offers a powerful tool for controlling the biofactor presentation. Pure protein beads made via a mild templating on vaterite CaCO₃ crystals can mimic cellular organelles in terms of the compartmentalization of active proteins. We believe that an integration of the approaches developed and described here offers a strong tool for engineering and mimicking both extra- and intracellular microenvironments.

The Future of Layer-by-Layer Assembly: A Tribute to ACS Nano Associate Editor Helmuth Möhwald

Layer-by-layer (LbL) assembly is a widely used tool for engineering materials and coatings. In this Perspective, dedicated to the memory of ACS Nano associate editor Prof. Dr. Helmuth Möhwald, we discuss the developments and applications that are to come in LbL assembly, focusing on coatings, bulk materials, membranes, nanocomposites, and delivery vehicles.

Janus-micromotor-based on-off luminescence sensor for active TNT detection

An active TNT (2,4,6-trinitrotoluene) catalytic sensor based on Janus upconverting nanoparticle (UCNP)-functionalized micromotor capsules, displaying "on-off" luminescence with a low limit of detection has been developed. The Janus capsule motors were fabricated by layer-by-layer assembly of UCNP-functionalized polyelectrolyte microcapsules, followed by sputtering of a platinum layer onto one half of the capsule. By catalytic decomposition of hydrogen peroxide to oxygen bubbles, the Janus UCNP capsule motors are rapidly propelled with a speed of up to 110 μm s^-1. Moreover, the Janus motors display efficient on-off luminescent detection of TNT. Owing to the unique motion of the Janus motor with bubble generation, the likelihood of collision with TNT molecules and the reaction rate between them are increased, resulting in a limit of detection as low as 2.4 ng mL^-1 TNT within 1 minute. Such bubble-propelled Janus UCNP capsule motors have great potential for contaminated water analysis.

Optical monitoring of adipose tissue destruction under encapsulated lipase action

Enzymatic destruction of adipose tissue has been achieved by encapsulation of lipase into the polymeric microcapsules. Adipose tissue destruction was delayed while lipase is encapsulated comparing with the direct lipase action as demonstrated by optical microscopy and optical coherence tomography in in vitro studies. Raman spectroscopy confirms that triglycerides in fat tissue were cleaved into free fatty acids, glycerol, and possible di- and monoglyceride residues. The results underpin the concept of local and controlled treatment of tissues via encapsulation. Effect of lipase encapsulation into the polymeric microcapsules on adipose tissue destruction compared to free lipase application.

Microfluidic fabrication of microparticles for biomedical applications

Droplet microfluidics offers exquisite control over the flows of multiple fluids in microscale, enabling fabrication of advanced microparticles with precisely tunable structures and compositions in a high throughput manner. The combination of these remarkable features with proper materials and fabrication methods has enabled high efficiency, direct encapsulation of actives in microparticles whose features and functionalities can be well controlled. These microparticles have great potential in a wide range of bio-related applications including drug delivery, cell-laden matrices, biosensors and even as artificial cells. In this review, we briefly summarize the materials, fabrication methods, and microparticle structures produced with droplet microfluidics. We also provide a comprehensive overview of their recent uses in biomedical applications. Finally, we discuss the existing challenges and perspectives to promote the future development of these engineered microparticles.

The mechanism of catalase loading into porous vaterite CaCO3 crystals by co-synthesis

The mechanism of catalase loading into vaterite CaCO₃ crystals through co-synthesis is deciphered showing the crucial role of Ca²⁺-induced catalase aggregation.

Binding Mechanism of the Model Charged Dye Carboxyfluorescein to Hyaluronan/Polylysine Multilayers

Biopolymer-based multilayers become more and more attractive due to the vast span of biological application they can be used for, e.g., implant coatings, cell culture supports, scaffolds. Multilayers have demonstrated superior capability to store enormous amounts of small charged molecules, such as drugs, and release them in a controlled manner; however, the binding mechanism for drug loading into the multilayers is still poorly understood. Here we focus on this mechanism using model hyaluronan/polylysine (HA/PLL) multilayers and a model charged dye, carboxyfluorescein (CF). We found that CF reaches a concentration of 13 mM in the multilayers that by far exceeds its solubility in water. The high loading is not related to the aggregation of CF in the multilayers. In the multilayers, CF molecules bind to free amino groups of PLL; however, intermolecular CF-CF interactions also play a role and (i) endow the binding with a cooperative nature and (ii) result in polyadsorption of CF molecules, as proven by fitting of the adsorption isotherm using the BET model. Analysis of CF mobility in the multilayers by fluorescence recovery after photobleaching has revealed that CF diffusion in the multilayers is likely a result of both jumping of CF molecules from one amino group to another and movement, together with a PLL chain being bound to it. We believe that this study may help in the design of tailor-made multilayers that act as advanced drug delivery platforms for a variety of bioapplications where high loading and controlled release are strongly desired.

Encapsulation of Spherical Cross-Linked Phenylalanine Ammonia Lyase Aggregates in Mesoporous Biosilica

Cross-linked enzyme aggregates (CLEAs) have recently emerged as a promising tool for enzyme immobilization because of their simplicity and low cost. However, a lack of good size and morphological control over the as-prepared CLEAs has limited their practical applications. For example, the prepared CLEAs exhibit amorphous large clusters that would cause significant mass-transfer limitations, which lead to a low catalytic efficiency. Here, inspired by biomineralized core-shell structures in nature, we develop a novel mesoporous spherical CLEA with a biosilica shell by using phenylalanine ammonia lyase based on CaCO₃ microtemplates and biomimetic mineralization. The resultant CLEAs exhibited a spherical structure with good monodispersity instead of the amorphous clusters of conventional CLEAs and showed activity higher than that of conventional CLEAs. Moreover, the thermostability, tolerance against denaturants, and mechanical stability of the spherical CLEAs with a biosilica shell were enhanced significantly compared with those of conventional CLEAs. In particular, the spherical CLEAs with a biosilica shell retained 70% of their original activity after 13 cycles, whereas the conventional CLEAs retained only 35% of their original activity. This approach could be an efficient strategy for improving the catalytic properties of CLEAs.

Temperature effect on the build-up of exponentially growing polyelectrolyte multilayers. An exponential-to-linear transition point

In this study, the effect of temperature on the build-up of exponentially growing polyelectrolyte multilayer films was investigated. It aims at understanding the multilayer growth mechanism as crucially important for the fabrication of tailor-made multilayer films. Model poly(L-lysine)/hyaluronic acid (PLL/HA) multilayers were assembled in the temperature range of 25-85 °C by layer-by-layer deposition using a dipping method. The film growth switches from the exponential to the linear regime at the transition point as a result of limited polymer diffusion into the film. With the increase of the build-up temperature the film growth rate is enhanced in both regimes; the position of the transition point shifts to a higher number of deposition steps confirming the diffusion-mediated growth mechanism. Not only the faster polymer diffusion into the film but also more porous/permeable film structure are responsible for faster film growth at higher preparation temperature. The latter mechanism is assumed from analysis of the film growth rate upon switching of the preparation temperature during the film growth. Interestingly, the as-prepared films are equilibrated and remain intact (no swelling or shrinking) during temperature variation in the range of 25-45 °C. The average activation energy for complexation between PLL and HA in the multilayers calculated from the Arrhenius plot has been found to be about 0.3 kJ mol(-1) for monomers of PLL. Finally, the following processes known to be dependent on temperature are discussed with respect to the multilayer growth: (i) polymer diffusion, (ii) polymer conformational changes, and (iii) inter-polymer interactions.

Programmable Modulation of Membrane Permeability of Proteinosome upon Multiple Stimuli Responses

Membrane permeability is a necessary and overarching attribute for all the hollow microcompartments toward the application as nanoreactors or artificial cells. Differing from the widely reported various stimuli models, in this study we describe a way to generate a multistimuli proteinosome capable of being triggered in sequence of temperature, redox species, and pH, thus, showing a continuous modulation on the membrane permeability. Studies showed that the molecular weight cutoff of the constructed proteinosome membrane could be continuously turned up from 78 to 102 kDa and to 142 kDa, and then turned down to 35.2 kDa upon different stimuli. As a proof of concept, such continuous modulated behavior allows a well-controlled programmed release upon the encapsulation of a FITC-labeled dextran into proteinosomes. It is anticipated that such designed proteinosomes equipped with programmed modulation of membrane permeability are promising candidates for the further development of artificial model design, such as cellular communication or metabolism in which stuff exchange is required to support in situ procedures.

Subdiffraction-Resolution Optical Measurements of Molecular Transport in Thin Polymer Films

The measurement of molecular transport within polymer films yields information about the internal structural organization of the films and is useful in applications such as the design of polymeric capsules for drug delivery. Layer-by-layer assembly of polyelectrolyte multilayer films has been widely used in such applications where the multilayer structure often exhibits anisotropic transport resulting in different diffusivities in the lateral (parallel to the film) and transverse (normal to the film) directions. Although lateral transport can be probed using techniques such as fluorescence recovery after photobleaching (FRAP), it cannot be applied to probing transverse diffusivity in polymer films smaller than the diffraction limit of light. Here we present a technique to probe the transport of molecules tagged with fluorphores in polymer films thinner than the optical diffraction limit using the modulation of fluorescence emission depending on the distance of the tagged molecules from a metal surface. We have used this technique to probe the diffusion of proteins biotin and bovine serum albumin (BSA) in polyelectrolyte multilayer films. We also studied the interdiffusion of chains in multilayer films using this technique. We observed a 3 order of magnitude increase in interdiffusion as a function of the ionic strength of the medium. This technique, along with FRAP, will be useful in studying anisotropic transport in polymer films, even those thinner than the diffraction limit, because the signal in this technique arises only from transverse and not lateral transport. Finally, this technique is also applicable to studying the diffusion of chromophore-labeled species within a polymer film. We demonstrate this aspect by measuring the transverse diffusion of methylene blue in the PAH-PAA multilayer system.

Composite SERS-based satellites navigated by optical tweezers for single cell analysis

Herein, we have designed composite SERS-active micro-satellites, which exhibit a dual role: (i) effective probes for determining cellular composition and (ii) optically movable and easily detectable markers. The satellites were synthesized by the layer-by-layer assisted decoration of silica microparticles with metal (gold or silver) nanoparticles and astralen in order to ensure satellite SERS-based microenvironment probing and satellite recognition, respectively. A combination of optical tweezers and Raman spectroscopy can be used to navigate the satellites to a certain cellular compartment and probe the intracellular composition following cellular uptake. In the future, this developed approach may serve as a tool for single cell analysis with nanometer precision due to the multilayer surface design, focusing on both extracellular and intracellular studies.

Hyaluronic Acid/Poly-l-Lysine Multilayers as Reservoirs for Storage and Release of Small Charged Molecules

Polyelectrolyte multilayer films are nowadays very attractive for bioapplications due to their tunable properties and ability to control cellular response. Here we demonstrate that multilayers made of hyaluronic acid and poly-l-lysine act as high-capacity reservoirs for small charged molecules. Strong accumulation within the film is explained by electrostatically driven binding to free charges of polyelectrolytes. Binding and release mechanisms are discussed based on charge balance and polymer dynamics in the film. Our results show that transport of molecules through the film-solution interface limits the release rate. The multilayers might serve as an effective platform for drug delivery and tissue engineering due to high potential for drug loading and controlled release.

Bioresorbable polyelectrolytes for smuggling drugs into cells

There is ample evidence that biodegradable polyelectrolyte nanocapsules are multifunctional vehicles which can smuggle drugs into cells, and release them upon endogenous activation. A large number of endogenous stimuli have already been tested in vitro, and in vivo research is escalating. Thus, the interest in the design of intelligent polyelectrolyte multilayer (PEM) drug delivery systems is clear. The need of the hour is a systematic translation of PEM-based drug delivery systems from the lab to clinical studies. Reviews on multifarious stimuli that can trigger the release of drugs from such systems already exist. This review summarizes the available literature, with emphasis on the recent progress in PEM-based drug delivery systems that are receptive in the presence of endogenous stimuli, including enzymes, glucose, glutathione, pH, and temperature, and addresses different active and passive drug targeting strategies. Insights into the current knowledge on the diversified endogenous approaches and methodological challenges may bring inspiration to resolve issues that currently bottleneck the successful implementation of polyelectrolytes into the catalog of third-generation drug delivery systems.

Near infrared-modulated propulsion of catalytic Janus polymer multilayer capsule motors

The use of a near-infrared (NIR) laser for reversible modulation of a bubble-driven Janus polymer capsule motor is demonstrated.

Glucose-induced decomposition of layer-by-layer films composed of phenylboronic acid-bearing poly(allylamine) and poly(vinyl alcohol) under physiological conditions

Phenylboronic acid-bearing poly(allylamine)/poly(vinyl alcohol) layer-by-layer films coupled with glucose oxidase decomposed in the presence of glucose under physiological conditions.

Protein loading into porous CaCO3 microspheres: adsorption equilibrium and bioactivity retention

Here we focus on understanding protein interactions with mesoporous CaCO₃ microspheres (vaterite form), which are nowadays very actively used as decomposable templates for biomolecule encapsulation under mild conditions.

Temperature-induced molecular transport through polymer multilayers coated with PNIPAM microgels

Composite polymer films with temperature controlled permeability are designed by coating soft polyelectrolyte multilayers with PNIPAM microgels.

Optical trapping and manipulation of plasmonic nanoparticles: fundamentals, applications, and perspectives

This feature article discusses the optical trapping and manipulation of plasmonic nanoparticles, an area of current interest with potential applications in nanofabrication, sensing, analytics, biology and medicine. We give an overview over the basic theoretical concepts relating to optical forces, plasmon resonances and plasmonic heating. We discuss fundamental studies of plasmonic particles in optical traps and the temperature profiles around them. We place a particular emphasis on our own work employing optically trapped plasmonic nanoparticles towards nanofabrication, manipulation of biomimetic objects and sensing.

Magneto-responsive nanocomposites: preparation and integration of magnetic nanoparticles into films, capsules, and gels

This review reports on the latest developments in the field of magnetic nanocomposites, with a special focus on the potentials introduced by the incorporation of magnetic nanoparticles into polymer and supramolecular matrices. The general notions and the state of the art of nanocomposite materials are summarized and the results reported in the literature over the last decade on magnetically responsive films, capsules and gels are reviewed. The most promising concepts that have inspired the design of magneto-responsive nanocomposites are illustrated through remarkable examples where the integration of magnetic nanoparticles into organic architectures has successfully taken to the development of responsive multifunctional materials.

CaCO₃ templated micro-beads and -capsules for bioapplications

Porous CaCO₃ vaterite microparticles have been introduced a decade ago as sacrificial cores and becoming nowadays as one of the most popular templates to encapsulate bioactive molecules. This is due to the following beneficial features: i) mild decomposition conditions, ii) highly developed surface area, and iii) controlled size as well as easy and chip preparation. Such properties allow one to template and design particles with well tuned material properties in terms of composition, structure, functionality -- the parameters crucially important for bioapplications. This review presents a recent progress in utilizing the CaCO₃ cores for the assembly of micrometer-sized beads and capsules with encapsulated both small drugs and large biomacromolecules. Bioapplications of all the particles for drug delivery, biotechnology, and biosensing as well as future perspectives for templating are addressed.

Stability and cell uptake of calcium carbonate templated insulin microparticles

Therapeutic proteins are an integral part of today's pharmaceutical practice, but they still present challenges from the drug delivery point of view. In this work, a new approach is studied based on hard templating for fabrication of microparticles composed of pure insulin, which may enable effective delivery, for instance pulmonary delivery. The approach is both simple and versatile: the protein particles are prepared by selective precipitation into porous CaCO3 microtemplates, followed by full decomposition of the template at the isoelectric point of the protein (pH 5.2). Control over the main material parameters (mechanical properties, porosity, morphology and stability at physiological conditions) are critical for the envisioned application in drug delivery. It is demonstrated that these critical parameters can be significantly tuned by a slight final pH variation around the isoelectric point (pH range 4-6) and by the denaturation degree of insulin. Electrostatic interactions and inter-protein crosslinking in the protein particles as well as their internal structure are considered, to explain the variation in the particle properties. The particle property parameters are explored using atomic force microscopy, optical microscopy and circular dichroism spectra. Finally, phagocytic clearance of the protein particles in vitro was studied to explore possible enhancements in particle fabrication to improve the efficiency of insulin delivery by inhalation.

Aggregation inhibition for graphene oxide nanosheets in polyelectrolyte solutions and assembly of nanocapsules with graphene oxide nanosheets as template

A strategy for inhibiting aggregation of graphene oxide (GO) nanosheets is proposed in this work, which is important to understand the physical chemistry of the stability of GO and related factors.

25th anniversary article: Dynamic interfaces for responsive encapsulation systems

Encapsulation systems are urgently needed both as micrometer and sub-micrometer capsules for active chemicals' delivery, to encapsulate biological objects and capsules immobilized on surfaces for a wide variety of advanced applications. Methods for encapsulation, prolonged storage and controllable release are discussed in this review. Formation of stimuli responsive systems via layer-by-layer (LbL) assembly, as well as via mobile chemical bonding (hydrogen bonds, chemisorptions) and formation of special dynamic stoppers are presented. The most essential advances of the systems presented are multifunctionality and responsiveness to a multitude of stimuli - the possibility of formation of multi-modal systems. Specific examples of advanced applications - drug delivery, diagnostics, tissue engineering, lab-on-chip and organ-on-chip, bio-sensors, membranes, templates for synthesis, optical systems, and antifouling, self-healing materials and coatings - are provided. Finally, we try to outline emerging developments.

Layer-by-layer polyelectrolyte deposition: a mechanism for forming biocomposite materials

Complex coacervates prepared from poly(aspartic acid) (polyAsp) and poly-l-histidine (polyHis) were investigated as models of the metastable protein phases used in the formation of biological structures such as squid beak. When mixed, polyHis and polyAsp form coacervates whereas poly-l-glutamic acid (polyGlu) forms precipitates with polyHis. Layer-by-layer (LbL) structures of polyHis-polyAsp on gold substrates were compared with those of precipitate-forming polyHis-polyGlu by monitoring with iSPR and QCM-D. PolyHis-polyAsp LbL was found to be stiffer than polyHis-polyGlu LbL with most water evicted from the structure but with sufficient interfacial water remaining for molecular rearrangement to occur. This thin layer is believed to be fluid and like preformed coacervate films, capable of spreading over both hydrophilic ethylene glycol as well as hydrophobic monolayers. These results suggest that coacervate-forming polyelectrolytes deserve consideration for potential LbL applications and point to LbL as an important process by which biological materials form.