Chemistry of polydopamine analogues

Polydopamine Applications in Biomedicine and Environmental Science

This manuscript explores the multifaceted applications of polydopamine (PDA) across various scientific and industrial domains. It covers the chemical aspects of PDA and its potential in bone tissue engineering, implant enhancements, cancer treatment, and nanotechnology. The manuscript investigates PDA's roles in tissue engineering, cell culture technologies, surface modifications, drug delivery systems, and sensing techniques. Additionally, it highlights PDA's contributions to microfabrication, nanoengineering, and environmental applications. Through detailed testing and assessment, the study identifies limitations in PDA-related research, such as synthesis complexity, incomplete mechanistic understanding, and biocompatibility variability. It also proposes future research directions aimed at improving synthesis techniques, expanding biomedical applications, and enhancing sensing technologies to optimize PDA's efficacy and scalability.

Mechanism of Self-Oxidative Copolymerization and its Application with Polydopamine-pyrrole Nano-copolymers

Currently, the copolymer of dopamine (DA) and pyrrole (PY) via chemical and electrochemical oxidation usually requires additional oxidants, and lacks flexibility in regulating the size and morphology, thereby limiting the broad applications of DA-PY copolymer in biomedicine. Herein, the semiquinone radicals produced by the self-oxidation of DA is ingeniously utilized as the oxidant to initiate the following copolymerization with PY, and a series of quinone-rich polydopamine-pyrrole copolymers (PDAm-nPY) with significantly enhanced absorption in near-infrared (NIR) region without any additional oxidant assistance is obtained. Moreover, the morphology and size of PDAm-nPY can be regulated by changing the concentration of DA and PY, thereby optimizing nanoscale PDA0.05-0.15PY particles (≈ 150 nm) with excellent NIR absorption and surface modification activity are successfully synthesized. Such PDA0.05-0.15PY particles show effective photoacoustic (PA) imaging and photothermal therapy (PTT) against 4T1 tumors in vivo. Furthermore, other catechol derivatives can also copolymerize with PY under the same conditions. This work by fully utilizing the semiquinone radical active intermediates produced through the self-oxidation of DA reduces the dependence on external oxidants in the synthesis of composite materials and predigests the preparation procedure, which provides a novel, simple, and green strategy for the synthesis of other newly catechol-based functional copolymers.

A post-synthetic modification strategy for enhancing Pt adsorption efficiency in MOF/polymer composites

Growing polymers inside porous metal-organic frameworks (MOFs) can allow incoming guests to access the backbone of otherwise non-porous polymers, boosting the number and/or strength of available adsorption sites inside the porous support. In the present work, we have devised a novel post-synthetic modification (PSM) strategy that allows one to graft metal-chelating functionality onto a polymer backbone while inside MOF pores, enhancing the material's ability to recover Pt(iv) from complex liquids. For this, polydopamine (PDA) was first grown inside of a MOF, known as Fe-BTC (or MIL-100 Fe). Next, a small thiol-containing molecule, 2,3-dimercapto-1-propanol (DIP), was grafted to the PDA via a Michael addition. After the modification of the PDA, the Pt adsorption capacity and selectivity were greatly enhanced, particularly in the low concentration regime, due to the high affinity of the thiols towards Pt. Moreover, the modified composite was found to be highly selective for precious metals (Pt, Pd, and Au) over common base metals found in electronic waste (i.e., Pb, Cu, Ni, and Zn). X-ray photoelectron spectroscopy (XPS) and in situ X-ray absorption spectroscopy (XAS) provided insight into the Pt adsorption/reduction process. Last, the PSM was extended to various thiols to demonstrate the versatility of the chemistry. It is hoped that this work will open pathways for the future design of novel adsorbents that are fine-tuned for the rapid, selective retrieval of high-value and/or critical metals from complex liquids.

Dipole-Dipole Tuned Electronic Reconfiguration of Defective Carbon Sites for Efficient Oxygen Reduction into H2O2

Metal-free carbon-based materials are one of the most promising electrocatalysts toward 2-electron oxygen reduction reaction (2e-ORR) for on-site production of hydrogen peroxide (H2O2), which however suffer from uncontrollable carbonizations and inferior 2e-ORR selectivity. To this end, a polydopamine (PDA)-modified carbon catalyst with a dipole-dipole enhancement is developed via a calcination-free method. The H2O2 yield rate outstandingly reaches 1.8 mol gcat -1 h-1 with high faradaic efficiency of above 95% under a wide potential range of 0.4-0.7 VRHE, overwhelming most of carbon electrocatalysts. Meanwhile, within a lab-made flow cell, the synthesized ORR electrode features an exceptional stability for over 250 h, achieved a pure H2O2 production efficacy of 306 g kWh-1. By virtue of its industrial-level capabilities, the established flow cell manages to perform a rapid pulp bleaching within 30 min. The superior performance and enhanced selectivity of 2e-ORR is experimentally revealed and attributed to the electronic reconfiguration on defective carbon sites induced by non-covalent dipole-dipole influence between PDA and carbon, thereby prohibiting the cleavage of O-O in OOH intermediates. This proposed strategy of dipole-dipole effects is universally applicable over 1D carbon nanotubes and 2D graphene, providing a practical route to design 2e-ORR catalysts.

A graft-to strategy of poly(vinylphosphonates) on dopazide-coated gold nanoparticles using in situ catalyst activation

A modular synthetic pathway for poly(diethyl vinylphosphonates) grafting-to gold nanoparticles is presented. Utilising an azide-dopamine derivative as nanoparticle coating agent, alkyne-azide click conditions were used to covalently tether the polymer to gold nanoparticles leading to stable and well distributed colloids for different applications.

Functional hemostatic hydrogels: design based on procoagulant principles

Uncontrolled hemorrhage results in various complications and is currently the leading cause of death in the general population. Traditional hemostatic methods have drawbacks that may lead to ineffective hemostasis and even the risk of secondary injury. Therefore, there is an urgent need for more effective hemostatic techniques. Polymeric hemostatic materials, particularly hydrogels, are ideal due to their biocompatibility, flexibility, absorption, and versatility. Functional hemostatic hydrogels can enhance hemostasis by creating physical circumstances conducive to hemostasis or by directly interfering with the physiological processes of hemostasis. The procoagulant principles include increasing the concentration of localized hemostatic substances or establishing a physical barrier at the physical level and intervention in blood cells or the coagulation cascade at the physiological level. Moreover, synergistic hemostasis can combine these functions. However, some hydrogels are ineffective in promoting hemostasis or have a limited application scope. These defects have impeded the advancement of hemostatic hydrogels. To provide inspiration and resources for new designs, this review provides an overview of the procoagulant principles of hemostatic hydrogels. We also discuss the challenges in developing effective hemostatic hydrogels and provide viewpoints.

Pyrrole-Doped Polydopamine-Pyrrole (PDA-nPY) Nanoparticles with Tunable Size and Improved NIR Absorption for Photothermal Therapy

Polydopamine (PDA) as a melanin-like biomimetic material with excellent biocompatibility, full spectrum light absorption capacity and antioxidation property has been extensively applied in the biomedical field. Based on the high reactivity of dopamine (DA), exploiting new strategies to fabricate novel PDA-based nano-biomaterials with controllable size and improved performance is valuable and desirable. Herein, we reported a facile way to synthesize pyrrole-doped polydopamine-pyrrole nanoparticles (PDA-nPY NPs) with tunable size and enhanced near-infrared (NIR) absorption capacity through self-oxidative polymerization of DA with PY in an alkaline ethanol/H2O/NH4OH solution. The PDA-nPY NPs maintain excellent biocompatibility and surface reactivity as PDA. By regulating the volume of added PY, PDA-150PY NPs with a smaller size (<100 nm) and four-fold higher absorption intensity at 808 nm than that of PDA can be successfully fabricated. In vitro and in vivo experiments effectively further demonstrate that PDA-150PY NPs can effectively inhibit tumor growth and completely thermally ablate a tumor. It is believed that these PY doped PDA-nPY NPs can be a potential photothermal (PT) agent in biomedical application.

Laser-Induced Graphitization of Polydopamine on Titania Nanotubes

Since the discovery of laser-induced graphite/graphene, there has been a notable surge of scientific interest in advancing diverse methodologies for their synthesis and applications. This study focuses on the utilization of a pulsed Nd:YAG laser to achieve graphitization of polydopamine (PDA) deposited on the surface of titania nanotubes. The partial graphitization is corroborated through Raman and XPS spectroscopies and supported by water contact angle, nanomechanical, and electrochemical measurements. Reactive molecular dynamics simulations confirm the possibility of graphitization in the nanosecond time scale with the evolution of NH3, H2O, and CO2 gases. A thorough exploration of the lasing parameter space (wavelength, pulse energy, and number of pulses) was conducted with the aim of improving either electrochemical activity or photocurrent generation. Whereas the 532 nm laser pulses interacted mostly with the PDA coating, the 365 nm pulses were absorbed by both PDA and the substrate nanotubes, leading to a higher graphitization degree. The majority of the photocurrent and quantum efficiency enhancement is observed in the visible light between 400 and 550 nm. The proposed composite is applied as a photoelectrochemical (PEC) sensor of serotonin in nanomolar concentrations. Because of the suppressed recombination and facilitated charge transfer caused by the laser graphitization, the proposed composite exhibits significantly enhanced PEC performance. In the sensing application, it showed superior sensitivity and a limit of detection competitive with nonprecious metal materials.

Oxidative Polymerization of 3,4-Dihydroxybenzylamine─The Lower Homolog of Dopamine

Polydopamine (PDA) formed by oxidative polymerization of dopamine has attracted wide interest because of its unique properties, in particular its strong adhesion to almost all types of surfaces. 3,4-Dihydroxybenzylamine (DHBA) as the lower homolog of PDA also contains a catechol unit and an amino group and thus can be expected to exhibit a similar adhesion and reaction behavior. In fact, autoxidation of DHBA with air in 2-amino-2-hydroxymethyl-propane-1,3-diol (Tris) buffer gives rise to deeply colored oligomer/polymer products (poly(3,4-dihydroxybenzylamine) (PDHBA)) that strongly adhere to several surfaces. Here, the material is characterized by solid-state NMR spectroscopy, Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), electron spin resonance (ESR) spectroscopy, mass spectrometry, and atomic force microscopy (AFM). Reaction pathways were rationalized taking into consideration the analytical results that show similarity to PDA chemistry, but also considering differences, leading to a more complex reaction behavior and thus to new structures not found in PDA.

Antifouling Surface Coating on Various Substrates by Inducing Tyrosinase-Mediated Oxidation of a Tyrosine-Conjugated Sulfobetaine Derivative

Inspired by the melanogenesis occurring in nature, we report tyrosinase-mediated antifouling surface coating by synthesizing a tyrosine-conjugated sulfobetaine derivative (Tyr-SB). Synthetic Tyr-SB contains zwitterionic sulfobetaine and tyrosine, whose phenolic amine group acts as a dormant coating precursor. In contrast to catecholamine derivatives, tyrosine derivatives are stable against auto-oxidation and are enzymatically oxidized only in the presence of tyrosinase to initiate melanin-like oxidation. When the surface of interest was applied during the course of Tyr-SB oxidation, a superhydrophilic poly(Tyr-SB) film was coated on the surfaces, thereby showing antifouling performance against proteins or adherent cells. Because the oxidation of Tyr-SB occurred under mild aqueous conditions (pH 6-7) without the use of any chemical oxidants, such as sodium periodate or ammonium persulfate, we anticipate that the coating method described herein will serve as a biocompatible tool in the field of biosensors, cell surface engineering, and medical devices, whose interfaces differ in chemistry.

Fabrication and Characterization of Polyelectrolyte Coatings by Polymerization and Co-Deposition of Acrylic Acid Using the Dopamine in Weak Acid Solution

Existing medical materials (such as silicone rubber, glass slides, etc.) fail to meet the functional requirements of biosensing, cell culture, and drug delivery due to their poor wettability. The preparation of polyelectrolyte coatings with excellent wettability and protein adsorption helps broaden the application of medical materials. Poly(acrylic acid) (PAA) is a common polyelectrolyte with stronger protein adsorption, but the existing methods for obtaining PAA coating have certain shortcomings to limit their industrial applications. In this study, dopamine (DA) was used to polymerize and co-deposit acrylic acid (AA) in weak acid solution to functionalize the surface of materials, and the effects of different mass ratios of DA/AA on the wettability and protein adsorption of the coating were deeply investigated. The results demonstrate that PDA/PAA coating is successfully prepared on the surface of four substrates and greatly reduces the water contact angle of these surfaces. Moreover, these coatings show excellent protein adsorption, and the amount of adsorbed protein on the coated QCM chip is increased by 57.74% than the uncoated QCM chip. In addition, the coating has a certain pH responsiveness, and its wettability and protein adsorption are closely related to the pH of the solution. The preparation strategy proposed is simple and substrate-independent, which provides valuable insights into the application of the one-step polymerization and co-deposition strategy under weak acid conditions.

Potential of sodium dodecyl sulfate micellar solutions as eluents in magnetic dispersive micro-solid phase extraction with polydopamine-coated magnetite nanoparticles. Application to antidepressant drugs

In this paper, the potential of micellar solutions of the anionic surfactant sodium dodecyl sulfate (SDS) as eluents in dispersive micro-solid phase extraction (D-μSPE) using polydopamine-coated magnetite nanoparticles (Fe₃O₄@PDA NPs) for the extraction and preconcentration of seven basic drugs (bupropion, citalopram, fluoxetine, mianserin, nomifensine, trimipramine, and viloxazine) is explored for the first time (to the best to our knowledge) and compared with conventional hydro-organic eluents. The impact of the sample solution pH, Fe₃O₄@PDA NPs and PDA coating amounts and extraction time on the extraction efficiency (EE), as well as the composition of the eluent on the overall efficiency (OE) are studied. Under the selected experimental conditions (50 mg of Fe₃O₄@PDA NPs, 100 μL of 1 M NH₃, 5 min of extraction time and 0.15 M SDS at pH 2.6 as eluent), EE and OE values were higher than 90% for all compounds and for the most hydrophobic compounds (trimipramine, fluoxetine and mianserin), respectively. The results shown in this paper demonstrate the suitability of Fe₃O₄@PDA NPs as a sorbent for the extraction of antidepressants as well as the advantages of using SDS micellar solutions over classic hydro-organic eluents containing methanol, acetonitrile or tetrahydrofuran. Finally, the stability and reusability of the Fe₃O₄@PDA NPs is proven.

Effect of N-Methylation on Dopamine Surface Chemistry

Dopamine (DA) surface chemistry has received significant attention because of its applicability in a wide range of research fields and the ability to graft functional molecules onto numerous solid surfaces. Various DA derivatives have been newly synthesized to identify key factors affecting the coating efficiency and to advance the coating system development. The oxidation of catechol into quinone followed by internal cyclization via the nucleophilic attack of primary amine is crucial for DA-based surface coating. Thus, it is expected that the amine group's nucleophilicity control directly affects the coating efficiency. However, it has not been systematically investigated, and most studies have been conducted with the focus on the transformation of amines into amides, despite such approaches decreasing the coating efficiency; the nitrogen in amides is less nucleophilic than that in free amines. In this study, we investigated the effect of N-alkylation on dopamine surface chemistry. N,N-Dimethyldopamine (DMDA) was newly synthesized, and the coating efficiency was systematically compared with DA and N-methyldopamine (MDA). DA N-monomethylation improved the coating rate by increasing the nitrogen nucleophilicity, whereas N,N-dimethylation dramatically decreased the DA surface coating property. In addition, MDA remained capable of universal surface coating and secondary reactions using the surface catechols. This study provides opportunities for developing coating materials with advanced functions and an improved coating rate.

Development of Universal and Clickable Film by Mimicking Melanogenesis: On-Demand Oxidation of Tyrosine-Based Azido Derivative by Tyrosinase

In this study, we synthesized a tyrosine-based azido derivative (TBAD) that permits both substrate-independent surface coating and clickable film functionalization by mimicking natural melanogenesis. In contrast to catechol derivatives, which are generally susceptible to oxidation by air under ambient conditions, the monophenol-based TBAD remains stable under alkaline and neutral conditions, and is activated to oxidized quinone in situ by tyrosinase to initiate melanin-like polymerization. The resulting poly(TBAD) film can be formed on various substrates including noble metals, metal oxides, and synthetic polymers, which can undergo click reaction with terminal alkyne moieties on the entire surface or a specific region through Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC). The enzyme-mediated coating can rapidly form thin films (∼10 nm) and produce a uniform film morphology, which are important aspects in surface chemistry. This on-demand, clickable coating may become a significant tool for bioconjugation, soft lithography, and labeling techniques. This article is protected by copyright. All rights reserved.

Wireless Rehabilitation Training Sensor Arrays Made with Hot Screen-Imprinted Conductive Hydrogels with a Low Percolation Threshold

Herein, we propose a highly sensitive wireless rehabilitation training ball with a piezoresistive sensor array for patients with Parkinson's disease (PD). The piezoresistive material is a low percolation threshold conductive hydrogel which is formed with polypyrrole (PPy) nanofibers (NFs) as a conductive filler derived from a polydopamine (PDA) template. The proton acid doping effect and molecular template of PDA are essential for endowing PPy NFs with a high aspect ratio, leading to a low percolation threshold (∼0.78 vol %) and a low Young's 004Dodulus of 37.69 kPa and hence easy deformation. The piezoresistive sensor exhibited a static and dynamic stability of 10,000 s and 15,000 cycle times, respectively. This stability could be attributed to the increased hydrophilicity of conductive fillers, enhancing the interfacial strength between the conductive filler and the matrix. The interaction between the PDA-PPy NFs and the hydrogel matrix endows the hydrogel with toughness and ensures the stability of the device. Additionally, the microdome structure of the conductive hydrogel, produced by hot screen-imprinting, dramatically improves the sensitivity of the piezoresistive sensor (∼856.14 kPa^-1). The microdome conductive hydrogel can distinguish a subtle pressure of 15.40 Pa compared to the control hydrogel without a microstructure. The highly sensitive piezoresistive sensor has the potential to monitor the hand-grip force, which is not well controlled by patients with PD. The rehabilitation training ball assembled with a sensor array on the surface and a wireless chip for communication inside is built and used to monitor the pressure in real time through the WeChat applet. Thus, this work has significantly broadened the application of hydrogel-based flexible piezoresistive sensors for human activity monitoring, which provides a promising strategy to realize next-generation electronics.

Replacing amine by azide: Dopamine azide polymerization triggered by sodium periodate

Polydopamine (PDA) have been widely described for a range of biomedical and surface engineering applications. However the structure of PDA remains elusive due to the insoluble nature of the polymer....

Recent developments in mussel-inspired materials for biomedical applications

Over the decades, researchers have strived to synthesize and modify nature-inspired biomaterials, with the primary aim to address the challenges of designing functional biomaterials for regenerative medicine and tissue engineering. Among these challenges, biocompatibility and cellular interactions have been extensively investigated. Some of the most desirable characteristics for biomaterials in these applications are the loading of bioactive molecules, strong adhesion to moist areas, improvement of cellular adhesion, and self-healing properties. Mussel-inspired biomaterials have received growing interest mainly due to the changes in mechanical and biological functions of the scaffold due to catechol modification. Here, we summarize the chemical and biological principles and the latest advancements in production, as well as the use of mussel-inspired biomaterials. Our main focus is the polydopamine coating, the conjugation of catechol with other polymers, and the biomedical applications that polydopamine moieties are used for, such as matrices for drug delivery, tissue regeneration, and hemostatic control. We also present a critical conclusion and an inspired view on the prospects for the development and application of mussel-inspired materials.

Recent Advances in Antioxidant Polymers: From Sustainable and Natural Monomers to Synthesis and Applications

Advances in technology have led to the production of sustainable antioxidants and natural monomers for food packaging and targeted drug delivery applications. Of particular importance is the synthesis of lignin polymers, and graft polymers, dopamine, and polydopamine, inulin, quercetin, limonene, and vitamins, due to their free radical scavenging ability, chemical potency, ideal functional groups for polymerization, abundance in the natural environment, ease of production, and activation of biological mechanisms such as the inhibition of the cellular activation of various signaling pathways, including NF-κB and MAPK. The radical oxygen species are responsible for oxidative damage and increased susceptibility to cancer, cardiovascular, degenerative musculoskeletal, and neurodegenerative conditions and diabetes; such biological mechanisms are inhibited by both synthetic and naturally occurring antioxidants. The orientation of macromolecules in the presence of the plasticizing agent increases the suitability of quercetin in food packaging, while the commercial viability of terpenes in the replacement of existing non-renewable polymers is reinforced by the recyclability of the precursors (thyme, cannabis, and lemon, orange, mandarin) and marginal ecological effect and antioxidant properties. Emerging antioxidant nanoparticle polymers have a broad range of applications in tumor-targeted drug delivery, food fortification, biodegradation of synthetic polymers, and antimicrobial treatment and corrosion inhibition. The aim of the review is to present state-of-the-art polymers with intrinsic antioxidant properties, including synthesis scavenging activity, potential applications, and future directions. This review is distinct from other works given that it integrates different advances in antioxidant polymer synthesis and applications such as inulin, quercetin polymers, their conjugates, antioxidant-graft-polysaccharides, and polymerization vitamins and essential oils. One of the most comprehensive reviews of antioxidant polymers was published by Cirillo and Iemma in 2012. Since then, significant progress has been made in improving the synthesis, techniques, properties, and applications. The review builds upon existing research by presenting new findings that were excluded from previous reviews.

Metal Cluster-Based Electrochemical Biosensing System for Detecting Epithelial-to-Mesenchymal Transition

N-cadherin serves as an important oncobiomarker of epithelial-to-mesenchymal transition (EMT) progression, which identifies invasion and metastasis of malignant tumor cells. Although many efforts have been devoted to quantitative detection of N-cadherin, efforts to analyzing the protein of interest at intact cellular levels are scarce. Herein, a metal cluster-based electrochemical biosensing system is developed to determine the expressing levels of N-cadherin during the EMT process of tumor cells. To be specific, a peptide with a unique sequence and function is designed as a reductant and an anchor to synthesize metal clusters in a precise manner. Consequently, peptide-modified metal clusters possess N-cadherin-targeting, photoluminescence, and electrocatalytic properties. Especially, the redox-active metal clusters function as both an electron-transfer mediator and an electronic conductor for enhanced electrochemical sensing. These favorable features enable them as a rapid, sensitive, and reliable whole-cell biosensor, which integrates the fluorescence and electrochemical signals. This cytosensor can accurately quantify the expression levels of N-cadherin on at least 5000 tumor cells. Further, the current signals of model cancer cells gradually increase with EMT progression, indicating tumor cell-type evolution. Our study represents the advanced bioprobe and analytical methods for accurate quantitation of a biomarker to identify tumor progression.

Polydopamine Films with 2D-like Layered Structure and High Mechanical Resilience

Highly oriented, layered, and mechanically resilient films of polydopamine (PDA) have been synthesized from the air/water interface. The films show a unique layered structure, as shown by scanning and transmission electron studies (SEM/TEM) and X-ray diffraction analysis (XRD), which resemble that of 2D layered materials. The films exhibit a composition typical of PDA-based materials, as evidenced by X-ray photoelectron spectroscopy (XPS); moreover, the samples present the distinctive resonance modes of PDA-based nanomaterials in Raman and infrared spectroscopy (FTIR) experiments. The presence of highly ordinated 3-4 protomolecule stacking, taking place at the air/water interface, with a unique eumelanin-like supramolecular arrangement is presented. Moreover, the films show superior mechanical resilience with E = 13 ± 4 GPa and H = 0.21 ± 0.03 GPa, as revealed by nanoindentation experiments, making them highly resilient and easily transferable. Finally, the ordering induced by the interface opens many possibilities for further studies, including those regarding the supramolecular structure on PDA due to their similarity to 2D layered materials.

Enhancing the Oil-Fouling Resistance of Polymeric Membrane Ion-Selective Electrodes by Surface Modification of a Zwitterionic Polymer-Based Oleophobic Self-Cleaning Coating

Due to the frequent oil spill accidents and pollution of industrial oily wastewater, oil fouling has become a great challenge to polymeric membrane ion-selective electrodes (ISEs) for applications in oil-contaminated areas. Herein, a simple approach is proposed to enhance the oil-fouling resistance of polymeric membrane ISEs by surface modification of a zwitterionic polymer-based underwater oleophobic coating. As a proof-of-concept, a classical poly(vinyl chloride) membrane-based calcium ion-selective electrode (Ca²⁺-ISE) is chosen as a model sensor. The zwitterionic polymer-based coating can be readily modified on the sensor's surface by immersion of the electrode into a mixture solution of dopamine and a zwitterionic acrylate monomer (i.e., sulfobetaine methacrylate, SBMA). The formed poly(SBMA) (PSBMA) coating alters the oleophilic membrane surface to an oleophobic one, which endows the surface with excellent self-cleaning properties without loss of the sensor's analytical performance. Compared to the pristine Ca²⁺-ISE, the PSBMA-modified Ca²⁺-ISE exhibits an improved analytical stability when exposed to oil-containing wastewater. The proposed approach can be explored to enhance the oil-fouling resistance of other polymeric membrane-based electrochemical sensors for use in the oil-polluted environment.

Melanins as Sustainable Resources for Advanced Biotechnological Applications

Melanins are a class of biopolymers that are widespread in nature and have diverse origins, chemical compositions, and functions. Their chemical, electrical, optical, and paramagnetic properties offer opportunities for applications in materials science, particularly for medical and technical uses. This review focuses on the application of analytical techniques to study melanins in multidisciplinary contexts with a view to their use as sustainable resources for advanced biotechnological applications, and how these may facilitate the achievement of the United Nations Sustainable Development Goals.

Injectable zwitterionic thermosensitive hydrogels with low-protein adsorption and combined effect of photothermal-chemotherapy

Injectable hydrogels have been developed as biomedical materials in various fields but the biofouling on their surface limits applications in vivo. In this work, a zwitterionic structure was introduced into an injectable hydrogel based on thermosensitive nanogels to overcome the foreign body reaction. The hydrodynamic diameter of the resultant poly(N-isopropylacrylamide-co-sulfobetaine methacrylate) (PNS) nanogels was ca. 105 nm. The aqueous dispersion with a high content of PNS nanogels showed a flowable sol state at room temperature, and turned into a hydrogel in situ at ∼36 °C due to the thermosensitivity of the PNS nanogels. In particular, the resulting hydrogel exhibited lower biofouling both in vitro and in vivo in comparison with similar hydrogels without a zwitterionic structure. Polydopamine nanoparticles (PDA NPs) as a photothermal agent and an anti-tumour drug could be easily co-loaded in the injectable hydrogel. Under near-infrared (NIR) irradiation for 10 min, the temperature of the PNS system containing PDA NPs could reach ca. 38 °C. The drug release from the in situ-forming hydrogel could be accelerated by NIR laser irradiation, and showed a sustainable release behavior and adjustability. The results of intratumoral injection of the as-prepared injectable hydrogel containing PDA NPs and an anti-tumour drug showed significant anticancer effects combining photothermal therapy and local chemotherapy. This constructed injectable zwitterionic thermosensitive hydrogel is easy to use with the advantage of low-fouling and may become a promising platform for various biomedical applications.

Single-step formulation of levodopa-based nanotheranostics - strategy for ultra-sensitive high longitudinal relaxivity MRI guided switchable therapeutics

Nanotheranostics (combined diagnosis and therapy) is emerging as an integral part of future therapeutic strategies. However, the development and fabrication of a nanotheranostic module involves multistep processes and always faces formulation challenges. The complexity involved in its multi-step formulations hinders its reproducible industrial production and clinical translation. Therefore, a facile synthesis of multifunctional nanotheranostics is critical to its translational success. In this report, we have developed a one-pot facile strategy to prepare a MRI-visible photothermal theranostic switchable module (T-SWITCH). These nanoparticles are synthesized through polymerization of levodopa together with the reduction of KMnO4 in the presence of silk sericin for the formation of manganese dioxide particles within the T-SWITCH. The synthesized T-SWITCH showed a uniform size distribution of around 95.77 nm and high longitudinal relaxivity coefficient (r1) of up to 61.94 mM-1 s-1. The reported r1 of the T-SWITCH is exceedingly higher than that of any other previously reported manganese-based contrast agents with first-rate in vitro and in vivo contrast enhancement capability. The T-SWITCH can be activated to switch its therapeutic mode using near-infrared (NIR) light. It exhibited strong excitable absorption in the safer and biological NIR window between 650 and 900 nm. We have validated the significant anti-cancer therapeutic efficacy of T-SWITCH both in vitro and in vivo through switchable photothermal therapy.

Laser-induced graphitization of polydopamine leads to enhanced mechanical performance while preserving multifunctionality

Polydopamine (PDA) is a simple and versatile conformal coating material that has been proposed for a variety of uses; however in practice its performance is often hindered by poor mechanical properties and high roughness. Here, we show that blue-diode laser annealing dramatically improves mechanical performance and reduces roughness of PDA coatings. Laser-annealed PDA (LAPDA) was shown to be >100-fold more scratch resistant than pristine PDA and even better than hard inorganic substrates, which we attribute to partial graphitization and covalent coupling between PDA subunits during annealing. Moreover, laser annealing provides these benefits while preserving other attractive properties of PDA, as demonstrated by the superior biofouling resistance of antifouling polymer-grafted LAPDA compared to PDA modified with the same polymer. Our work suggests that laser annealing may allow the use of PDA in mechanically demanding applications previously considered inaccessible, without sacrificing the functional versatility that is so characteristic of PDA.

Development of Stimulus-Responsive Degradable Film via Codeposition of Dopamine and Cystamine

Herein, we report a degradable film that can be coated on various substrates by the codeposition of dopamine and cystamine. The thickness of the resulting film (pDC) varies depending on the initial ratio of dopamine/cystamine dissolved in a solution; the thickest film (ca. 60 nm) is obtained under optimized codeposition conditions. Selective degradation of pDC occurs in the presence of tris(2-carboxyethyl)phosphine (TCEP), the reaction kinetics of which are highly dependent on the TCEP concentration. For further application as a drug-delivery platform, doxorubicin can be loaded within the pDC film, which is released actively under film degradation in response to TCEP. We expect that the developed pDC film will be a useful tool for developing drug delivery cargo, antibacterial surface, and cell surface coating for various biomedical applications.

Synthesis and photoluminescence properties of hybrid 1D core-shell structured nanocomposites based on ZnO/polydopamine

In the present work, we report on the modelling of processes at the zinc oxide and polydopamine (ZnO/PDA) interface. The PDA layer was deposited onto ZnO nanorods (NRs) via chemical bath deposition. The defect concentrations in ZnO before and after PDA deposition were calculated and analysed. The ZnONRs/PDA core–shell nanostructures were studied by transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman and Fourier-transform infrared (FTIR) spectroscopy, photoluminescence (PL) measurements, and diffuse reflectance spectroscopy. The TEM and electron energy loss spectroscopy (EELS) measurements confirmed the conformal coating of PDA, while the PL emission from ZnO and ZnONRs/PDA samples showed a reduction of intensity after the PDA deposition. The decrease of defect concentration participating in PL and quantum efficiency explains the PL reduction. Finally, the observed decrease of activation energies and a shift of the PL peaks are attributed to the formation of an additional local electrical field between the PDA and ZnO nanostructures.

The results shown in this study provide a unique insight into the optical and electronic processes of the ZnO/PDA interface.

Anchorable phosphorylcholine copolymer synthesis and cell membrane mimetic antifouling coating fabrication for blood compatible applications

Protein adsorption and platelet activation on biomedical devices contacting blood may lead to the formation of thrombus. The thrombogenicity of biomaterials could be minimized or prevented by anchoring a cell membrane mimetic antifouling coating (CMMAC). Here, we report the construction of a CMMAC by a newly designed 2-methacryloyloxyethyl phosphorylcholine (MPC) copolymer (PMPCC) containing 5-20 carboxylic long arm side chains. The long arm provides its end carboxylic group with more freedom and a larger reaction space for an easier and more efficient surface anchoring. With the assistance of mussel-inspired universal adhesive polydopamine (PDA), different material surfaces precoated with PDA can immobilize the PMPCC via multipoint anchoring of the randomly distributed carboxylic side chains. The multipoint anchoring results in a stabilized and condensed PDA-PMPCC coating. The phosphorylcholine zwitterions of the densely immobilized PMPCC polymers form a cell outer membrane mimetic interface in an aqueous environment, endowing excellent properties of resisting protein adsorption, platelet activation and blood cell adhesion. More importantly, the PDA-PMPCC-coated glass surface can suppress thrombus formation for more than 24 h, while the bare glass surface forms obvious thrombus in 6 h tested in the same blood. Furthermore, the fabrication of the PDA-PMPCC coating is simple and material-independent. Therefore, the simple synthesis, facile surface coating and excellent hemocompatibility of the PMPCC make it a promising material for biomimetic surface modification.

Universal Strategy for Efficient Fabrication of Blood Compatible Surfaces via Polydopamine-Assisted Surface-Initiated Activators Regenerated by Electron Transfer Atom-Transfer Radical Polymerization of Zwitterions

Implant and blood-contacting biomaterials are challenged by biofouling and thrombus formation at their interface. Zwitterionic polymer brush coating can achieve excellent hemocompatibility, but the preparation often involves tedious, expensive, and complicated procedures that are designed for specific substrates. Here, we report a facile and universal strategy of creating zwitterionic polymer brushes on variety of materials by polydopamine (PDA)-assisted and surface-initiated activators regenerated by electron transfer atom-transfer radical polymerization (PDA-SI-ARGET-ATRP). A PDA adhesive layer is first dipcoated on a substrate, followed by covalent immobilization of 3-trimethoxysilyl propyl 2-bromo-2-methylpropionate (SiBr, ATRP initiator) on the PDA via condensation. Meanwhile, the trimethoxysilyl group of SiBr also cross-links the PDA oligomers forming stabilized PDA/SiBr complex coating. Finally, SI-ARGET-ATRP is performed in a zwitterionic monomer solution catalyzed by the parts per million level of CuBr₂ without deoxygenization. The conveniently fabricated zwitterionic polymer brush coatings are demonstrated to have stable, ultralow fouling, and extremely blood compatible and functionalizable characteristics. This facile, versatile, and universal surface modification strategy is expected to be widely applicable in various advanced biomaterials and devices.

One-Pot Decoration of Cupric Oxide on Activated Carbon Fibers Mediated by Polydopamine for Bacterial Growth Inhibition

Despite the widespread application of activated carbon fiber (ACF) filters in air cleaning owing to their high surface area and low price, they have certain limitations in that they facilitate bacterial growth upon prolonged use as ACF filters can provide favorable conditions for bacterial survival. The deposition of cupric oxide (CuO) on ACFs can be an effective way of resolving this problem because CuO can inhibit the proliferation of bacteria owing to its antimicrobial properties. However, finding a new method that allows the simple and uniform coating of CuO on ACF filters is challenging. Here, we demonstrate one-pot CuO deposition mediated by polydopamine (PD) to realize an ACF filter with antimicrobial activity. Scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), and X-ray photoelectron spectroscopy (XPS) analyses reveal that CuO and PD are uniformly deposited on the ACF surface. The amount of CuO formed on the ACFs is measured by thermogravimetric analysis (TGA). Finally, the changes in surface area, pressure drop, and antimicrobial activity after coating PD-CuO on the ACFs are evaluated. The use of PD-CuO on the ACFs effectively suppresses the growth of bacteria and enhances the mechanical properties without significantly sacrificing the original characteristics of the ACF filter.

Facile synthesis of polydivinylbenzene coated magnetic polydopamine coupled with pressurized liquid extraction for the extraction and cleanup of polycyclic aromatic hydrocarbons in soils

Due to the trace levels of polycyclic aromatic hydrocarbons (PAHs) in soil and the complexity of soil matrices, effective sample pretreatment methods are of great significance to obtain accurate analytical results. In this paper, polydopamine (PDA) encapsulated Fe₃O₄ particles were used as seeds for in situ polymerization of divinylbenzene (DVB) to derive magnetic hybrid material Fe₃O₄@PDA@PDVB. Coupled with pressurized liquid extraction, Fe₃O₄@PDA@PDVB was investigated as a selective adsorbent for the extraction and cleanup of PAHs in soil. The prepared magnetic material was characterized and demonstrated to possess strong hydrophobicity and superparamagnetism. Under optimal conditions, Fe₃O₄@PDA@PDVB can effectively extract 15 PAHs from a 30% methanol solution within 2 min, and it is more selective for PAHs than for n-alkane in soil extracts. The matrix effect significantly decreased after extraction by the prepared material, which showed superiority to a silica gel column method (EPA 3630C Method). The developed method was linear (5-1000 ng g^-1) with coefficient of determination (R²) ranging from 0.9986-0.9998, and the limits of detection were 0.13-0.54 ng g^-1. Additionally, repetitive experiments indicated that the prepared material was reproducible and reusable with relative standard deviations below 8.4% and 8.6%, respectively. Finally, the new method was successfully employed to determine the concentrations of PAHs in genuine soil and standard reference material, and the results were comparable to those of widely utilized EPA methodology.

Highly efficient removal of Cr(vi) ions from wastewater by the pomegranate-like magnetic hybrid nano-adsorbent of polydopamine and Fe3O4 nanoparticles

Fe₃O₄ nanoparticles have attracted extensive attention for solving Cr(vi) pollution because they can effectively reduce Cr(vi) to the less toxic and less soluble Cr(iii)-containing species.

Facile Synthesis of Water-Soluble Fullerene (C60) Nanoparticles via Mussel-Inspired Chemistry as Efficient Antioxidants

Rational design and modification of the all-carbon fullerene cages to meliorate their nature of hydrophobicity is critical for biomedical applications. The outstanding electron affinity of fullerenes enables them to effectively eliminate reactive oxygen species (ROS), the excess of which may lead to health hazards or biological dysfunction. Herein reported is a facile, mild, and green approach to synthesizing the favorable water-soluble C60 nanoparticles capable of ROS-scavenging by combining the mussel-inspired chemistry with the Michael addition reaction. Various characterization techniques, including Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectra (XPS), thermogravimetric analysis (TGA), transmission electron cryomicroscopy (Cryo-TEM), and dynamic laser scattering (DLS) were carried out to confirm the satisfactory preparation of the hybrid C60-PDA-GSH nanoparticles, which exhibited apparent scavenging capacity of DPPH and hydroxyl radicals in vitro. Additionally, the biocompatible C60-PDA-GSH nanoparticles entered into cells and displayed a universal cytoprotective effect against oxidative press induced by H2O2 in four kinds of human cells at a low concentration of 2 μg/mL. The ease and versatility of the strategy present in this work will not only trigger more fullerene-based materials by the immobilization of diverse functional molecules, but will also extend their possible applications.

Functionalized theranostic nanocarriers with bio-inspired polydopamine for tumor imaging and chemo-photothermal therapy

Nanocarriers sensitive to near infrared light (NIR) are useful templates for chemo-photothermal therapy (PTT) and imaging of tumors due to the ability to change the absorbed NIR energy to heat. The conventional photo-absorbing reagents lack the efficient loading and release of drug before reaching the target site leading to insufficient therapeutic outcomes. To overcome these limitations, the surface of nanocarriers can be modified with different polymers with wide functionalities to provide systems with diagnostic, therapeutic, and theranostic capabilities. Among various polymers, polydopamine (PDA) has been more interested due to complex structure with various chemical moieties, and the capacity to be used through different coating mechanism. In this review, we describe the complex structure, chemical properties, and coating mechanisms of PDA. Moreover, the advantage and surface modification of some relevant nanosystems based on carbon materials, gold, iron oxide, manganese, and upconverting nanomaterials by using PDA will be discussed, in detail.

Synergistic effect of polydopamine-polyethylenimine copolymer coating on graphene oxide for EVA nanocomposites and high-performance triboelectric nanogenerators

While the demand for lightweight high-strength nanocomposites is immense, their progress has been severely limited due to inferior filler dispersion and filler-matrix interface adhesion. This article reports a novel modification of graphene oxide (GO) encapsulated by the copolymer of polydopamine (PD) and polyethylenimine (PEI) via a Michael addition reaction, aiming to create robust ethylene vinyl acetate copolymer (EVA) nanocomposites even at very low amounts of filler loading by overcoming the above hindrances. It has been found that the addition of only 1.2 wt% modified GO (i.e., PD-PEI-rGO) increased the tensile strength, Young's modulus and storage modulus of EVA composites by 80%, 50% and 24%, respectively. These increments surpass many recent claims on relevant composites. Excellent molecular level dispersion was also observed from the fracture surface SEM images. Being amine-rich with high electron-donating capability and mechanically robust, the nanocomposite served as an outstanding tribopositive material, thereby generating 7.49 V and 4.06 μA output voltage and current, respectively, when employed in a triboelectric nanogenerator (TENG). The high electrical outputs led the device to light up 43 blue LEDs instantaneously upon hand pressing, demonstrating that the nanocomposite is indeed a promising candidate for harvesting green energy. Moreover, the nanogenerator displayed outstanding cyclic performance stability (even after 8000 cycles) and environmental durability.

Development of Cu-Modified PVC and PU for Catalytic Generation of Nitric Oxide

Nitric oxide (NO) generating surfaces are potentially promising for improving haemocompatibility of blood-contacting biomaterials. In the present report, Cu-modified poly(vinyl chloride) (PVC) and polyurethane (PU) were prepared via polydopamine (pDA)-assisted chelation. The copper content on the PVC and PU modified surfaces, assessed by inductively coupled plasma - optical emission spectrometry (ICP-OES), were about 3.86 and 6.04 nmol·cm−2, respectively. The Fourier-transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) data suggest that copper is attached to the polymer surface through complex formation with pDA. The cumulative leaching of copper from modified PVC and PU during the five day incubation in phosphate buffered saline (PBS), measured by inductively coupled plasma mass spectrometry (ICP-MS), was about 50.7 ppb and 48 ppb, respectively which is within its physiological level. Modified polymers were tested for their ability to catalytically generate NO by decomposing of endogenous S-nitrosothiol (GSNO). The obtained data show that Cu-modified PVC and PU exhibited the capacity to generate physiological levels of NO which could be a foundation for developing new biocompatible materials with NO-based therapeutics.

Dynamic Nitroxide Functional Materials

A substrate-independent and versatile coating platform for (spatially resolved) surface functionalization, based on nitroxide radical coupling (NRC) reactions and the formation of thermo-labile alkoxyamine functional groups, was introduced. Nitroxide-decorated poly(glycidyl methacrylate) (PGMA) microspheres, obtained through bioinspired copolymer surface deposition using dopamine and a nitroxide functional dopamine derivative as monomers, were conjugated with small functional groups in a rewritable process. Reversible coding of the nitroxide functional microspheres by NRC and decoding through thermal alkoxyamine fission were monitored and characterized by electron paramagnetic resonance (EPR) spectroscopy and X-ray photoelectron spectroscopy (XPS). In addition, this nitroxide coating system was exploited in "grafting-to" polymer surface ligations of poly(methyl methacrylate) (PMMA) and poly(2,2,2-trifluoroethyl methacrylate) (PTFEMA) in spatially confined areas. Polymer strands terminated with an Irgacure 2959 (2-hydroxy-4'-(2-hydroxyethoxy)-2-methylpropiophenone) photoinitiator were obtained through chain-transfer polymerization, and subsequently coupled to nitroxide-immobilized poly(dopamine) (PDA)-coated silicon substrates by using rapid photoclick NRC reactions. Light-driven polymer surface coding was visualized by time-of-flight secondary ion mass spectrometry (ToF-SIMS) and XPS imaging.

1st Symposium on Polydopamine and NanoTech Poland 2018: Conference Report

The NanoTech Poland is an annual international conference with a strong scientific agenda focused on nanotechnology in energy, environment, and biomedicine. The Nanotech Poland 2018 was held at the NanoBioMedical Centre and Department of Physics at Adam Mickiewicz University in Poznań from June 6th to June 9th. The aim of NanoTech Poland 2018 was to bring together the scientific community's principal investigators, scientists, researchers, analysts, clinicians, policy makers, industry experts, and well-established and budding entrepreneurs to discuss the present and future perspectives in nanotechnology and nanoscience research and development. This year, the 1st Symposium on Polydopamine was held on June 6th. This forum was dedicated to the application of polydopamine and related catechol materials in a variety of research fields, both at the nano- and macroscale. The symposium gathered leading scientists from this important research field from top universities and institutions that have been involved in the research revolved around polydopamine. With over 200 national and international participants, NanoTech Poland 2018 and the 1st Symposium on Polydopamine provided a forum to present and discuss the latest scientific news from the field of nanotechnology with a strong interdisciplinary aspect and bioinspired materials.

Dendrimer based theranostic nanostructures for combined chemo- and photothermal therapy of liver cancer cells in vitro

Here we report the synthesis of multifunctional nanocarriers based on PAMAM dendrimers generation (G) 4.0, 5.0 and 6.0 fixed to polydopamine (PDA) coated magnetite nanoparticles (Fe₃O₄). Synthesized nanoplatforms were characterized by transmission electron microscopy (TEM), the electrokinetic (zeta) potential, Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS) and magnetic resonance imaging (MRI). Further, we show as a proof of concept that nanocarriers functionalized with G 5.0 could be successfully applied in combined chemo- and photothermal therapy (CT-PTT) of the liver cancer cells. The cooperative effect of the modalities mentioned above led to higher mortality of cancer cells when compared to their individual performance. Moreover, the performed in vitro studies revealed that the application of dual therapy triggered the desired cell death mechanism-apoptosis. Furthermore, performed tests using Magnetic Resonance Imaging (MRI) showed that our materials have competitive contrast properties. Overall, the functionality of dendrimers has been extended by merging them with magnetic nanoparticles resulting in multifunctional hybrid nanostructures that are promising smart drug delivery system for cancer therapy.