Dual Optoelectronic Organic Field-Effect Device: Combination of Electroluminescence and Photosensitivity

Merging the functionality of an organic field-effect transistor (OFET) with either a light emission or a photoelectric effect can increase the efficiency of displays or photosensing devices. In this work, we show that an organic semiconductor enables a multifunctional OFET combining electroluminescence (EL) and a photoelectric effect. Specifically, our computational and experimental investigations of a six-ring thiophene-phenylene co-oligomer (TPCO) revealed that this material is promising for OFETs, light-emitting, and photoelectric devices because of the large oscillator strength of the lowest-energy singlet transition, efficient luminescence, pronounced delocalization of the excited state, and balanced charge transport. The fabricated OFETs showed a photoelectric response for wavelengths shorter than 530 nm and simultaneously EL in the transistor channel, with a maximum at ~570 nm. The devices demonstrated an EL external quantum efficiency (EQE) of ~1.4% and a photoelectric responsivity of ~0.7 A W-1, which are among the best values reported for state-of-the-art organic light-emitting transistors and phototransistors, respectively. We anticipate that our results will stimulate the design of efficient materials for multifunctional organic optoelectronic devices and expand the potential applications of organic (opto)electronics.

Selective Detection of Functionalized Carbon Particles based on Polymer Semiconducting and Conducting Devices as Potential Particulate Matter Sensors

This paper reports a new mechanism for particulate matter detection and identification. Three types of carbon particles are synthesized with different functional groups to mimic the real particulates in atmospheric aerosol. After exposing polymer-based organic devices in organic field effect transistor (OFET) architectures to the particle mist, the sensitivity and selectivity of the detection of different types of particles are shown by the current changes extracted from the transfer curves. The results indicate that the sensitivity of the devices is related to the structure and functional groups of the organic semiconducting layers, as well as the morphology. The predominant response is simulated by a model that yielded values of charge carrier density increase and charge carriers delivered per unit mass of particles. The research points out that polymer semiconductor devices have the ability to selectively detect particles with multiple functional groups, which reveals a future direction for selective detection of particulate matter.

Recent Progress in Gas Sensors Based on P3HT Polymer Field-Effect Transistors

In recent decades, the rapid development of the global economy has led to a substantial increase in energy consumption, subsequently resulting in the emission of a significant quantity of toxic gases into the environment. So far, gas sensors based on polymer field-effect transistors (PFETs), a highly practical and cost-efficient strategy, have garnered considerable attention, primarily attributed to their inherent advantages of offering a plethora of material choices, robust flexibility, and cost-effectiveness. Notably, the development of functional organic semiconductors (OSCs), such as poly(3-hexylthiophene-2,5-diyl) (P3HT), has been the subject of extensive scholarly investigation in recent years due to its widespread availability and remarkable sensing characteristics. This paper provides an exhaustive overview encompassing the production, functionalization strategies, and practical applications of gas sensors incorporating P3HT as the OSC layer. The exceptional sensing attributes and wide-ranging utility of P3HT position it as a promising candidate for improving PFET-based gas sensors.

Flexible organic field-effect transistors-based biosensors: progress and perspectives

Organic field-effect transistors (OFETs) have been proposed beyond three decades while becoming a research hotspot again in recent years because of the fast development of flexible electronics. Many novel flexible OFETs-based devices have been reported in these years. Among these devices, flexible OFETs-based sensors made great strides because of the extraordinary sensing capability of FET. Most of these flexible OFETs-based sensors were designed for biological applications due to the advantages of flexibility, reduced complexity, and lightweight. This paper reviews the materials, fabrications, and applications of flexible OFETs-based biosensors. Besides, the challenges and opportunities of the flexible OFETs-based biosensors are also discussed.

Stable Organic Radical for Enhancing Metal-Monolayer-Semiconductor Junction Performance

The preparation of monolayers based on an organic radical and its diamagnetic counterpart has been pursued on hydrogen-terminated silicon surfaces. The functional monolayers have been investigated as solid-state metal/monolayer/semiconductor (MmS) junctions showing a characteristic diode behavior which is tuned by the electronic characteristics of the organic molecule. The eutectic gallium-indium liquid metal is used as a top electrode to perform the transport measurements and the results clearly indicate that the SOMO-SUMO molecular orbitals impact the device performance. The junction incorporating the radical shows an almost two orders of magnitude higher rectification ratio (R(|J_1V/J_-1V|) = 10^4.04) in comparison with the nonradical one (R(|J_1V/J_-1V|) = 10^2.30). The high stability of the fabricated MmS allows the system to be interrogated under irradiation, evidencing that at the wavelength where the photon energy is close to the band gap of the radical there is a clear enhancement of the photoresponse. This is translated into an increase of the photosensitivity (S_ph) value from 68.7 to 269.0 mA/W for the nonradical and radical based systems, respectively.

Trapping of single diffusing particles by a circular disk on a reflecting flat surface. Absorbing hemisphere approximation

Recent progress in biophysics (for example, in studies of chemical sensing and spatiotemporal cell-signaling) poses new challenges to statistical theory of trapping of single diffusing particles. Here we deal with one of them, namely, trapping kinetics of single particles diffusing in a half-space bounded by a reflecting flat surface containing an absorbing circular disk. This trapping problem is essentially two-dimensional and the question of the angular dependence of the kinetics on the particle starting point is highly nontrivial. We propose an approximate approach to the problem that replaces the absorbing disk by an absorbing hemisphere of a properly chosen radius. This replacement makes the problem angular-independent and essentially one-dimensional. After the replacement one can find an exact solution for the particle propagator (Green's function) that allows one to completely characterize the kinetics. Extensive testing of the theoretical predictions based on the absorbing hemisphere approximation against three-dimensional Brownian dynamics simulations shows excellent agreement between the analytical and simulation results when the particle starts sufficiently far away from the disk. Our approach fails and the angular dependence of the kinetics is important when the distance of the particle starting point from the disk center is comparable with the disk radius. However, even when the initial distance is only two disk radii, the maximum relative error of the theoretical predictions is about 10%. The relative error rapidly decreases as the initial distance increases.

High-Performance Nitric Oxide Gas Sensors Based on an Ultrathin Nanoporous Poly(3-hexylthiophene) Film

Conjugated polymer (CP)-based organic field-effect transistors (OFETs) have been considered a potential sensor platform for detecting gas molecules because they can amplify sensing signals by controlling the gate voltage. However, these sensors exhibit significantly poorer oxidizing gas sensing performance than their inorganic counterparts. This paper presents a high-performance nitric oxide (NO) OFET sensor consisting of a poly(3-hexylthiophene) (P3HT) film with an ultrathin nanoporous structure. The ultrathin nonporous structure of the P3HT film was created via deposition through the shear-coating-assisted phase separation of polymer blends and selective solvent etching. The ultrathin nonporous structure of the P3HT film enhanced NO gas diffusion, adsorption, and desorption, resulting in the ultrathin nanoporous P3HT-film-based OFET gas sensor exhibiting significantly better sensing performance than pristine P3HT-film-based OFET sensors. Additionally, upon exposure to 10 ppm NO at room temperature, the nanoporous P3HT-film-based OFET gas sensor exhibited significantly better sensing performance (i.e., responsivity ≈ 42%, sensitivity ≈ 4.7% ppm^-1, limit of detection ≈ 0.5 ppm, and response/recovery times ≈ 6.6/8.0 min) than the pristine P3HT-film-based OFET sensors.

Intelligent wearable devices based on nanomaterials and nanostructures for healthcare

Emerging classes of flexible electronic sensors as alternatives to conventional rigid sensors offer a powerful set of capabilities for detecting and quantifying physiological and physical signals from human skin in personal healthcare. Unfortunately, the practical applications and commercialization of flexible sensors are generally limited by certain unsatisfactory aspects of their performance, such as biocompatibility, low sensing range, power supply, or single sensory function. This review intends to provide up-to-date literature on wearable devices for smart healthcare. A systematic review is provided, from sensors based on nanomaterials and nanostructures, algorithms, to multifunctional integrated devices with stretchability, self-powered performance, and biocompatibility. Typical electromechanical sensors are investigated with a specific focus on the strategies for constructing high-performance sensors based on nanomaterials and nanostructures. Then, the review emphasizes the importance of tailoring the fabrication techniques in order to improve stretchability, biocompatibility, and self-powered performance. The construction of wearable devices with high integration, high performance, and multi-functionalization for multiparameter healthcare is discussed in depth. Integrating wearable devices with appropriate machine learning algorithms is summarized. After interpretation of the algorithms, intelligent predictions are produced to give instructions or predictions for smart implementations. It is desired that this review will offer guidance for future excellence in flexible wearable sensing technologies and provide insight into commercial wearable sensors.

Organic Disordered Semiconductors as Networks Embedded in Space and Energy

Organic disordered semiconductors have a growing importance because of their low cost, mechanical flexibility, and multiple applications in thermoelectric devices, biosensors, and optoelectronic devices. Carrier transport consists of variable-range hopping between localized quantum states, which are disordered in both space and energy within the Gaussian disorder model. In this paper, we model an organic disordered semiconductor system as a network embedded in both space and energy so that a node represents a localized state while a link encodes the probability (or, equivalently, the Miller-Abrahams hopping rate) for carriers to hop between nodes. The associated network Laplacian matrix allows for the study of carrier dynamics using edge-centric random walks, in which links are activated by the corresponding carrier hopping rates. Our simulation work suggests that at room temperature the network exhibits a strong propensity for small-network nature, a beneficial property that in network science is related to the ease of exchanging information, particles, or energy in many different systems. However, this is not the case at low temperature. Our analysis suggests that there could be a parallelism between the well-known dependence of carrier mobility on temperature and the potential emergence of the small-world property with increasing temperature.

Recent Advances in Graphene-Based Nanocomposites for Ammonia Detection

The increasing demand to mitigate the alarming effects of the emission of ammonia (NH3) on human health and the environment has highlighted the growing attention to the design of reliable and effective sensing technologies using novel materials and unique nanocomposites with tunable functionalities. Among the state-of-the-art ammonia detection materials, graphene-based polymeric nanocomposites have gained significant attention. Despite the ever-increasing number of publications on graphene-based polymeric nanocomposites for ammonia detection, various understandings and information regarding the process, mechanisms, and new material components have not been fully explored. Therefore, this review summarises the recent progress of graphene-based polymeric nanocomposites for ammonia detection. A comprehensive discussion is provided on the various gas sensor designs, including chemiresistive, Quartz Crystal Microbalance (QCM), and Field-Effect Transistor (FET), as well as gas sensors utilising the graphene-based polymer nanocomposites, in addition to highlighting the pros and cons of graphene to enhance the performance of gas sensors. Moreover, the various techniques used to fabricate graphene-based nanocomposites and the numerous polymer electrolytes (e.g., conductive polymeric electrolytes), the ion transport models, and the fabrication and detection mechanisms of ammonia are critically addressed. Finally, a brief outlook on the significant progress, future opportunities, and challenges of graphene-based polymer nanocomposites for the application of ammonia detection are presented.

Printing Technologies as an Emerging Approach in Gas Sensors: Survey of Literature

Herein, we review printing technologies which are commonly approbated at recent time in the course of fabricating gas sensors and multisensor arrays, mainly of chemiresistive type. The most important characteristics of the receptor materials, which need to be addressed in order to achieve a high efficiency of chemisensor devices, are considered. The printing technologies are comparatively analyzed with regard to, (i) the rheological properties of the employed inks representing both reagent solutions or organometallic precursors and disperse systems, (ii) the printing speed and resolution, and (iii) the thickness of the formed coatings to highlight benefits and drawbacks of the methods. Particular attention is given to protocols suitable for manufacturing single miniature devices with unique characteristics under a large-scale production of gas sensors where the receptor materials could be rather quickly tuned to modify their geometry and morphology. We address the most convenient approaches to the rapid printing single-crystal multisensor arrays at lab-on-chip paradigm with sufficiently high resolution, employing receptor layers with various chemical composition which could replace in nearest future the single-sensor units for advancing a selectivity.

Butterfly-Like Triarylamines with High Hole Mobility and On/Off Ratio in Bottom-Gated OFETs

Highly π-extended butterfly-shaped triarylamine dyads with aryleneethynylene spacer were constructed using an efficient synthetic route. These aryleneethynylene-bridged dyads are highly fluorescent and exhibited high HOMO levels, and low bandgaps, which are suitable for high-performance p-type OFETs. The field-effect transistors were fabricated through a solution-processable method and exhibited promising p-type performance with field-effect mobility up to 4.3 cm² /Vs and high I_on/off of 10⁸ under ambient conditions.

Facile Functionalization Strategy for Ultrasensitive Organic Protein Biochips in Multi-Biomarker Determination

In recent years, organic field-effect transistors (OFETs) have shown great potential for advanced protein biochips due to their inherent biocompatibility and high-throughput detectability. However, the development of OFET-based protein biochips is still at an early stage. On the one hand, single-biomarker determination is not sufficient for the diagnosis of cancer; thus, simultaneous monitoring of electrical signals toward multi-biomarkers is widely concerned and explored. On the other hand, an optimized functionalization strategy for efficient protein immobilization is another key to make OFET-based protein biochips accessible with improved detection performance. Herein, a facile functionalization strategy is developed for excellent charge-transport thin films by suppressing the gelation of diketopyrrolopyrrole (DPP)-based polymer semiconductors with the addition of the glutaraldehyde cross-linking agent. Besides, functional groups are introduced on the device surface for efficient attachment of antibodies as receptors via a condensation reaction, enabling simultaneous determination of α-fetoprotein biomarker and carcinoembryonic antigen biomarker with improved sensitivity and reliability. Therefore, the proposed high-throughput OFET-based protein biochip has the potential to be widely utilized in early liver cancer diagnosis.