High-throughput analysis of GST-fusion protein expression and activity-dependent protein interactions on GST-fusion protein arrays with a spectral surface plasmon resonance biosensor

A Double-Stranded Aptamer for Highly Sensitive Fluorescent Detection of Glutathione S-Transferases

Aptamer-based biosensors have been widely constructed and applied to detect diverse targets. Glutathione S-transferase (GST), a pivotal phase II metabolic enzyme, plays a critical role in biotransformation in vivo, and aberrant GST expression is associated with various health risks. Herein, aptamers targeting GST were systematically selected from a randomized single-stranded DNA (ssDNA) library of 79 nucleotides (nt) using a biotinylated GST-immobilized streptavidin agarose (SA) bead SELEX technology. Following rigorous screening across eight rounds, four aptamers with strikingly similar secondary structures emerged. Among these, Seq3 exhibited the highest affinity towards GST and was selected for further optimization. A semi-rational post-SELEX truncation strategy was then employed based on base composition analysis, secondary structure analysis and affinity assessment. This strategy enabled the systematic removal of redundant nucleotides in Seq3 without compromising its affinity, ultimately yielding a truncated aptamer, Seq3-3, which retains its specificity with a compact 39nt length. Building upon Seq3-3, a double-stranded fluorescent aptamer probe was ingeniously designed for the in vitro detection of GST. The detection mechanism hinges on the competitive displacement of the complementary chain from the probe, mediated by the target protein, leading to the separation of the antisense oligonucleotide from the double-stranded complex. This process triggers the restoration of the fluorescence signal, enabling sensitive detection, and the probe exhibits excellent response within a linear range of GST activity ranging from 0 to 1500 U/L. The results show that not only an efficient strategy for screening robust and practicable aptamers but also an ultrahighly sensitive detection platform for GST was established.

Tagging Recombinant Proteins to Enhance Solubility and Aid Purification

Protein fusion technology has had a major impact on the efficient production and purification of individual recombinant proteins. The use of genetically engineered affinity and solubility-enhancing polypeptide "tags" has a long history, and there is a considerable repertoire of these that can be used to address issues related to the expression, stability, solubility, folding, and purification of their fusion partner. In the case of large-scale proteomic studies, the development of purification procedures tailored to individual proteins is not practicable, and affinity tags have become indispensable tools for structural and functional proteomic initiatives that involve the expression of many proteins in parallel. In this chapter, the rationale and applications of a range of established and more recently developed solubility-enhancing and affinity tags is described.

Tagging Recombinant Proteins to Enhance Solubility and Aid Purification

Protein fusion technology has had a major impact on the efficient production and purification of individual recombinant proteins. The use of genetically engineered affinity and solubility-enhancing polypeptide "tags" has increased greatly in recent years and there now exists a considerable repertoire of these that can be used to solve issues related to the expression, stability, solubility, folding, and purification of their fusion partner. In the case of large-scale proteomic studies, the development of purification procedures tailored to individual proteins is not practicable, and affinity tags have therefore become indispensable tools for structural and functional proteomic initiatives that involve the expression of many proteins in parallel. Here, the rationale and applications of a range of established and more recently developed solubility-enhancing and affinity tags is described.

Identification of transglutaminase 2 kinase substrates using a novel on-chip activity assay

Transglutaminase 2 (TG2) is an enzyme that plays a critical role in a wide variety of cellular processes through its multifunctional activities. TG2 kinase has emerged as an important regulator of apoptosis, as well as of chromatin structure and function. However, systematic investigation of TG2 kinase substrates is limited due to a lack of a suitable TG2 kinase activity assays. Thus, we developed a novel on-chip TG2 kinase activity assay for quantitative determination of TG2 kinase activity and for screening TG2 kinase substrate proteins in a high-throughput manner. Quantitative TG2 kinase activity was determined by selective detection of substrate protein phosphorylation on the surface of well-type amine arrays. The limit of detection (LOD) of this assay was 4.34μg/ml. We successfully applied this new activity assay to the kinetic analysis of 27 TG2-related proteins for TG2 kinase activity in a high-throughput manner and determined Michaelis-Menten constants (Km) of these proteins. We used the Km values and cellular locations of the TG2-related proteins to construct a substrate affinity map for TG2 kinase. Therefore, this on-chip TG2 kinase activity assay has a strong potential for the systematic investigation of substrate proteins and will be helpful for studying new physiological functions.

[Protocols of proteins interactomics: molecular fishing on optical chips and magnetic nanoparticles]

Now it is absolutely clear, that the majority of proteins in living systems function due to interaction with each other in stable or dynamic proteins complexes. Therefore necessity of deeper studies of proteins functions causes expansion of protein-protein interaction research. In the present review the brief description and comparative estimation of experimental methods and protocols of protein interactomics, based on technology of molecular fishing on an optical chips and paramagnetic nanoparticles is given.

Integrative proteomic profiling of protein activity and interactions using protein arrays

Proteomic studies based on abundance, activity, or interactions have been used to investigate protein functions in normal and pathological processes, but their combinatory approach has not been attempted. We present an integrative proteomic profiling method to measure protein activity and interaction using fluorescence-based protein arrays. We used an on-chip assay to simultaneously monitor the transamidating activity and binding affinity of transglutaminase 2 (TG2) for 16 TG2-related proteins. The results of this assay were compared with confidential scores provided by the STRING database to analyze the functional interactions of TG2 with these proteins. We further created a quantitative activity-interaction map of TG2 with these 16 proteins, categorizing them into seven groups based upon TG2 activity and interaction. This integrative proteomic profiling method can be applied to quantitative validation of previously known protein interactions, and in understanding the functions and regulation of target proteins in biological processes of interest.

Quantification of proteins on gold nanoparticles by combining MALDI-TOF MS and proteolysis

Protein-coated nanoparticles have been used in many studies, including those related to drug delivery, disease diagnosis, therapeutics, and bioassays. The number and density of proteins on the particles' surface are important parameters that need to be calculable in most applications. While quantification methods for two-dimensional surface-bound proteins are commonly found, only a few methods for the quantification of proteins on three-dimensional surfaces such as nanoparticles have been reported. In this paper, we report on a new method of quantifying proteins on nanoparticles using matrix assisted laser desorption/ionization time of flight (MALDI-TOF) mass spectrometry (MS). In this method, the nanoparticle-bound proteins are digested by trypsin and the resulting peptide fragments are analyzed by MALDI-TOF MS after the addition of an isotope-labeled internal standard (IS) which has the same sequence as a reference peptide of the surface-bound protein. Comparing the mass intensities between the reference peptide and the IS allows the absolute quantification of proteins on nanoparticles, because they have the same molecular milieu. As a model system, gold nanoparticles were examined using bovine serum albumin (BSA) as a coating protein. We believe that our strategy will be a useful tool that can provide researchers with quantitative information about the proteins on surfaces of three-dimensional materials.

Tagging recombinant proteins to enhance solubility and aid purification

Protein fusion technology has enormously facilitated the efficient production and purification of individual recombinant proteins. The use of genetically engineered affinity and solubility-enhancing polypeptide "tags" has increased greatly in recent years and there now exists a considerable repertoire of these that can be used to solve issues related to the expression, stability, solubility, folding, and purification of their fusion partner. In the case of large-scale proteomic studies, the development of purification procedures tailored to individual proteins is not practicable, and affinity tags have therefore become indispensable tools for structural and functional proteomic initiatives that involve the expression of many proteins in parallel. Here, the rationale and applications of a range of established and more recently developed solubility-enhancing and affinity tags are outlined.

Array-based spectral SPR biosensor: analysis of mumps virus infection

Spectral SPR biosensor is a useful system for a rapid analysis of protein arrays, as the biosensor with a fiber optic spectrometer can be easily aligned with the reflected light from protein arrays. The spectral SPR biosensor was constructed by Kretschmann geometry, based on the wavelength interrogation with various modules such as protein arrays, optical unit, programs for data acquisition and processing, and a motorized x-y stage for scanning. Protein arrays consist of glass/gold film/linker layer/protein/air. The surface of gold arrays was modified with poly(diallyldimethylammonium chloride) and 11-mercap-toundecanoic acid to immobilize mumps virus. The virus arrays were used to analyze anti-mumps virus in a buffer or human serum by the line-scanning mode of the spectral SPR biosensor. The array-based spectral SPR biosensor has a strong potential for a high-throughput serodiagnosis of infectious diseases.

Parallel scan spectral surface plasmon resonance imaging

We describe a parallel scan spectral surface plasmon resonance (SPR) imaging technique. We demonstrate experimentally, with a line-shaped light illumination, that an image acquired with an area CCD detector provides both SPR wavelength information and one-dimensional spatial distribution. Thus two-dimensional distribution of the refractive index of the entire sensing plane can be obtained with a one-dimensional optical line parallel scan. The technique offers advantages of both high sensitivity and high throughput, and could have potential applications in biochips analysis.

Expression and purification of GST fusion proteins

This unit describes the use of the glutathione-S-transferase (GST) gene fusion system as a method for high-level protein expression and purification from bacterial lysates. Several pGEX vectors are available with multiple cloning sites to allow for unidirectional insertion of the coding-region DNA into the pGEX vector. The GST fusion protein is easily purified by affinity chromatography using a glutathione-Sepharose matrix under mild conditions. Removal of the GST moiety from the protein of interest is accomplished through a specific protease cleavage site located between the GST moiety and the recombinant polypeptide. For solution digestions, GST is easily removed by a second round of chromatography on the glutathione column. Removal of proteases is facilitated by the use of a benzamidine-Sepharose column or a gel-filtration step. Purified protein has been used successfully in structural determinations, immunological studies, vaccine production, and structure-function analysis of protein-protein or DNA-protein interactions.

Surface-plasmon-resonance-based chemical proteomics: efficient specific extraction and semiquantitative identification of cyclic nucleotide-binding proteins from cellular lysates by using a combination of surface plasmon resonance, sequential elution and liquid chromatography-tandem mass spectrometry

Chemical proteomics is a powerful methodology for identifying the cellular targets of small molecules, however, it is biased towards abundant proteins. Therefore, quantitative strategies are needed to distinguish between specific and nonspecific interactions. Here, we explore the potential of the combination of surface plasmon resonance (SPR) coupled to liquid chromatography-tandem mass spectrometry (LC-MS/MS) as an alternative approach in chemical proteomics. We coupled cGMP molecules to the SPR chip, and monitored the binding and dissociation of proteins from a human lysate by using sequential elution steps and SPR. The eluted proteins were subsequently identified by LC-MS/MS. Our approach enabled the efficient and selective extraction of low-abundant cyclic-nucleotide-binding proteins such as cGMP-dependent protein kinase, and a quantitative assessment of the less- and nonspecific competitive binding proteins. The data show that SPR-based chemical proteomics is a promising alternative for the efficient specific extraction and quantitative identification of small-molecule-binding proteins from complex mixtures.

High-throughput analysis of mumps virus and the virus-specific monoclonal antibody on the arrays of a cationic polyelectrolyte with a spectral SPR biosensor

We investigated the potential use of a spectral surface plasmon resonance (SPR) biosensor in a high‐throughput analysis of mumps virus and a mumps virus‐specific mAb on the arrays of a cationic polyelectrolyte, poly(diallyldimethylammonium chloride) (PDDA). The PDDA surface was constructed by electrostatic adsorption of the polyelectrolyte onto a monolayer of 11‐mercaptoundecanoic acid (MUA). Poly‐l‐lysine was also adsorbed onto the MUA monolayer and compared with the PDDA surface in the capacity of mumps virus immobilization. The PDDA surface showed a higher adsorption of mumps virus than the poly‐l‐lysine surface. The SPR signal caused by the virus binding onto the PDDA surface was proportional to the concentration of mumps virus from 0.5 × 10⁵ to 14 × 10⁵ pfu/mL. The surface structure of the virus arrays was visualized by atomic force microscopy. Then, a dose‐dependent increase in the SPR signal was observed when various concentrations of the antimumps virus antibody in buffer or human serum were applied to the virus arrays, and their interaction was specific. Thus, it is likely that the spectral SPR biosensor based on the cationic polyelectrolyte surface may provide an efficient system for a high‐throughput analysis of intact virus and serodiagnosis of infectious diseases.