Microencapsulation of cholesteryl alkanoate by polymerization-induced phase separation and its association with drugs

An Atomistic Study of the Tensile Deformation of Carbon Nanotube-Polymethylmethacrylate Composites

There has been growing interest in polymer/carbon nanotube (CNT) composites due to an exceptional enhancement in mechanical, structural, thermal, and electronic properties resulting from a small percentage of CNTs. However, the performance of these composites is influenced by the type of polymer used. PMMA is a polymer of particular interest among many other polymers because of its biomaterial applications due to its biocompatibility, non-toxicity, and non-biodegradability. In this research, we utilized a reactive force field to conduct molecular dynamics simulations to investigate changes in the mechanical properties of single-walled carbon nanotube (SWCNT)-reinforced Poly (methyl methacrylate) (PMMA) matrix composites. To explore the potential of SWCNT-reinforced PMMA composites in these applications, we conducted simulations with varying CNT diameters (0.542-1.08 nm), CNT volume fractions (8.1-16.5%), and temperatures (100 K-700 K). We also analyzed the dependence of Young's modulus and interaction energy with different CNT diameters, along with changes in fracture toughness with varying temperatures. Our findings suggest that incorporating a small amount of SWCNT into the PMMA polymer matrix could significantly enhance the mechanical properties of the resulting composite. It is also found that the double-walled carbon nanotube has roughly twice the tensile strength of SWCNT, while maintaining the same simulation cell dimensions.

Smart Microcapsules with Molecular Polarity- and Temperature-Dependent Permeability

Microcapsules with molecule-selective permeation are appealing as microreactors, capsule-type sensors, drug and cell carriers, and artificial cells. To accomplish molecular size- and charge-selective permeation, regular size of pores and surface charges have been formed in the membranes. However, it remains an important challenge to provide advanced regulation of transmembrane transport. Here, smart microcapsules are designed that provide molecular polarity- and temperature-dependent permeability. With capillary microfluidic devices, water-in-oil-in-water (W/O/W) double-emulsion drops are prepared, which serve as templates to produce microcapsules. The oil shell is composed of two monomers and dodecanol, which turns to a polymeric framework whose continuous voids are filled with dodecanol upon photopolymerization. One of the monomers provides mechanical stability of the framework, whereas the other serves as a compatibilizer between growing polymer and dodecanol, preventing macrophase separation. Above melting point of dodecanol, molecules that are soluble in the molten dodecanol are selectively allowed to diffuse across the shell, where the rate of transmembrane transport is strongly influenced by partition coefficient. The rate is drastically lowered for temperatures below the melting point. This molecular polarity- and temperature-dependent permeability renders the microcapsules potentially useful as drug carriers for triggered release and contamination-free microreactors and microsensors.

Chiral Photonic Crystalline Microcapsules with Strict Monodispersity, Ultrahigh Thermal Stability, and Reversible Response

Tunable photonic crystals (TPCs) reflecting selected wavelengths of visible light and responding to external stimuli are widely applied to fabricate smart optical devices. Chiral nematic liquid crystals (CNLCs) possessing response to temperature, electric field, and magnetic field are considered as one-dimensional TPCs. The encapsulation of CNLCs provides responsive photonic devices with stand-alone macroscopic structure and excellent processability. However, when CNLCs as cores are wrapped by polymeric shells to form core-shell structured microcapsules, the polydispersity of microcapsule size, the irregular spatial geometry, and the low thermal stability inevitably result in a deterioration of the optical performance and limited application at high temperatures. Herein, a combination of microfluidic emulsification and interfacial polymerization is employed to fabricate polymer wrapped photonic crystalline microcapsules (PWPCMs). The sizes and reflected colors of PWPCMs can be simultaneously controlled by adjusting the flow rates in the microfluidic chips. PWPCMs possess strictly monodispersed sizes with coefficients of variation less than 1%. The free-standing PWPCMs have high thermal stability. The deformation temperature of PWPCMs is as high as 210 °C. The colored PWPCMs also exhibit a reversible thermochromic property between the chiral nematic phase and the isotropic phase. The highly stable and tunable PWPCMs provide new opportunities for a wide range of photonic applications, including smart optical window, tunable microlasers, responsive microsensors, and various photonic devices.

Microgels for long-term storage of vitamins for extended spaceflight

Biocompatible materials that can encapsulate large amounts of nutrients while protecting them from degrading environmental influences are highly desired for extended manned spaceflight. In this study, alkaline-degradable microgels based on poly(N-vinylcaprolactam) (PVCL) were prepared and analysed with their regard to stabilise retinol which acts as a model vitamin (vitamin A₁). It was investigated whether the secondary crosslinking of the particles with a polyphenol can prevent the isomerisation of biologically active all-trans retinol to biologically inactive cis-trans retinol. Both loading with retinol and secondary crosslinking of the particles was performed at room temperature to prevent an early degradation of the vitamin. This study showed that PVCL microgels drastically improve the water solubility of hydrophobic retinol. Additionally, it is demonstrated that the highly crosslinked microgel particles in aqueous solution can be utilised to greatly retard the light- and temperature-induced isomerisation process of retinol by a factor of almost 100 compared to pure retinol stored in ethanol. The use of microgels offers various advantages over other drug delivery systems as they exhibit enhanced biocompatibility and superior aqueous solubility.

Microencapsulation using vibrating technology

For over a half a century now, microencapsulation has played a very important role in many industries and in the recent decades, this versatile technology has been applied to numerous biotechnology and medical processes. However, successful application in these areas requires a methodology which has the capability to produce mono-dispersed, homogenous-shaped capsules, with a narrow size distribution, using a short production time. The manufacture of capsules using vibrating technology has gained significant interest mainly due to its simplistic approach to produce homogenous microcapsules with the desired characteristics for biotechnological and medical processes. However, certain limitations still exist for this methodology, which include the inability to manufacture microcapsules at large quantities and/or using highly viscous polymers. In this review, a detailed description of the theoretical and practical aspects behind the production of different types of alginate-based microcapsules, for application in biotechnological and medical processes, using vibrating technology, is given.

A thermoplastic/thermoset blend exhibiting thermal mending and reversible adhesion

In this paper, we report on the development of a new and broadly applicable strategy to produce thermally mendable polymeric materials, demonstrated with an epoxy/poly(-caprolactone) (PCL) phase-separated blend. The initially miscible blend composed of 15.5 wt % PCL undergoes polymerization-induced phase separation during cross-linking of the epoxy, yielding a "bricks and mortar" morphology wherein the epoxy phase exists as interconnected spheres (bricks) interpenetrated with a percolating PCL matrix (mortar). The fully cured material is stiff, strong, and durable. A heating-induced "bleeding" behavior was witnessed in the form of spontaneous wetting of all free surfaces by the molten PCL phase, and this bleeding is capable of repairing damage by crack-wicking and subsequent recrystallization with only minor concomitant softening during that process. The observed bleeding is attributed to volumetric thermal expansion of PCL above its melting point in excess of epoxy brick expansion, which we term differential expansive bleeding (DEB). In controlled thermal-mending experiments, heating of a cracked specimen led to PCL extrusion from the bulk to yield a liquid layer bridging the crack gap. Upon cooling, a "scar" composed of PCL crystals formed at the site of the crack, restoring a significant portion of the mechanical strength. When a moderate force was applied to assist crack closure, thermal-mending efficiencies exceeded 100%. We further observed that the DEB phenomenon enables strong and facile adhesion of the same material to itself and to a variety of materials, without any requirement for macroscopic softening or flow.