Water-soluble triply-responsive homopolymers of N,N -dimethylaminoethyl methacrylate with a terminal azobenzene moiety

Acid-sensitive prodrugs; a promising approach for site-specific and targeted drug release

Drugs administered through conventional formulations are devoid of targeting and often spread to various undesired sites, leading to sub-lethal concentrations at the site of action and the emergence of undesired effects. Hence, therapeutic agents should be delivered in a controlled manner at target sites. Currently, stimuli-based drug delivery systems have demonstrated a remarkable potential for the site-specific delivery of therapeutic moieties. pH is one of the widely exploited stimuli for drug delivery as several pathogenic conditions such as tumor cells, infectious and inflammatory sites are characterized by a low pH environment. This review article aims to demonstrate various strategies employed in the design of acid-sensitive prodrugs, providing an overview of commercially available acid-sensitive prodrugs. Furthermore, we have compiled the progress made for the development of new acid-sensitive prodrugs currently undergoing clinical trials. These prodrugs include albumin-binding prodrugs (Aldoxorubicin and DK049), polymeric micelle (NC-6300), polymer conjugates (ProLindac™), and an immunoconjugate (IMMU-110). The article encompasses a broad spectrum of studies focused on the development of acid-sensitive prodrugs for anticancer, antibacterial, and anti-inflammatory agents. Finally, the challenges associated with the acid-sensitive prodrug strategy are discussed, along with future directions.

Amino acid-derived ABCBA-type antifouling biohybrid with multi-stimuli responsivity and contaminant removal capability

A multi-stimuli (pH/thermo/redox)-responsive amphiphilic poly(cysteine methacrylamide)-block-poly(N,N-dimethylaminoethyl methacrylate)-block-polybutadiene-block-poly(N,N-dimethylaminoethyl methacrylate)-block-poly(cysteine methacrylamide) (PCysMAM-b-PDMAEMA-b-PB-b-PDMAEMA-b-PCysMAM) pentablock copolymer biohybrids, based on hydrophobic PB, ampholytic redox responsive PCysMAM and dual (pH and temperature) stimuli responsive PDMAEMA segments,...

Facile access to functional polyacrylates with dual stimuli response and tunable surface hydrophobicity

Well-defined functional polyacrylates with dual stimuli response and tunable surface hydrophobicity were synthesized via the recyclable Ni–Co alloy catalyzed reversible deactivation radical polymerization technique at ambient temperature.

Dual stimuli-responsive polypeptide prepared by thiol-ene click reaction of poly(l-cysteine) and N, N-dimethylaminoethyl acrylate

Stimuli-responsive polymers that can undergo conformational changes with external triggers have enabled themselves as smart materials for various utilizations, among which biodegradability is of particular importance to be engineered for biomedical application. In this study, a thermo and pH dual responsive polypeptide (N, N-dimethylaminoethyl acrylate-modified poly(l-cysteine)) (PLC-g-DMAEA) was prepared by the combination of N-carboxyanhydride ring-open polymerization and thiol-ene click chemistry. The biodegradable poly(l-cysteine) (PLC) with pendant thiol groups provided an easily clickable backbone for postmodification, which was demonstrated by reacting with a well-known monomer of N, N-dimethylaminoethyl acrylate (DMAEA) to achieve both temperature and pH responsiveness. The irreversible thermo-response of PLC-g-DMAEA could be attributed to the ordered β-sheets formed upon heating, leading to the trapped side groups with poor water accessibility. Moreover, this copolymer precipitated at pH ranging from 7.5 to 9.7, but protonation of tertiary amine groups (pH < 7.5) and salt forming of masked thiol groups (pH > 9.7) rendered it soluble in water. Our results revealed that a ready available vinyl monomer could be easily clicked onto the biodegradable PLC and its stimuli responsiveness would be reserved. Moreover, the primary and secondary structures of PLC might influence the conformation, thus leading to the unique responsive behavior of the resulted copolymer.

Transiently thermoresponsive polymers and their applications in biomedicine

The focus of this review is on the class of transiently thermoresponsive polymers. These polymers are thermoresponsive, but gradually lose this property upon chemical transformation - often a hydrolysis reaction - in the polymer side chain or backbone. An overview of the different approaches used for the design of these polymers along with their physicochemical properties is given. Their amphiphilic properties and degradability into fully soluble compounds make this class of responsive polymers attractive for drug delivery and tissue engineering applications. Examples of these are also provided in this review.

Controllable fabrication of novel pH-, thermo-, and light-responsive supramolecular dendronized copolymers with dual self-assembly behavior

Novel tri-stimulus responsive supramolecular dendronized copolymers with dual self-assembly behavior are prepared, exhibiting fast and fully reversible phase transitions and trans–cis isomerization.

Synthesis of PNVP-Based Copolymers with Tunable Thermosensitivity by Sequential Reversible Addition⁻Fragmentation Chain Transfer Copolymerization and Ring-Opening Polymerization

Through the reversible addition⁻fragmentation chain transfer (RAFT) copolymerization of 3-ethyl-1-vinyl-2-pyrrolidone (C₂NVP) and N-vinylpyrrolidone (NVP), a series of well-defined P(C₂NVP-co-NVP) copolymers were synthesized (Mn = ca. 8000 to 16,000 and Mw/Mn <1.5) by using a difunctional chain transfer agent, S-(1-methyl-4-hydroxyethyl acetate) O-ethyl xanthate (MHEX). Copolymerizing kinetics and different monomer ratio in feeds were conducted to study the apparent monomer reaction rate and reactivity ratios of NVP and C₂NVP, which indicated similar reaction rates and predominantly ideal random copolymers for the two monomers. The Tgs of the obtaining P(C₂NVP-co-NVP) copolymers significantly corresponded to not only molecular weights MWs but also copolymer compositions. These copolymers presented characteristic lower critical solution temperatures (LCST) behavior. We then studied the cloud points (CPs) of the copolymers with varying MWs and compositions. With different MWs, the CPs were linearly decreased from ca. 51 to 45 °C. With different compositions, the CPs of the copolymers decreased from ca. 48 to 29 °C with C₂NVP content (i.e., from 60.8 to 89.9 mol %). Fitting the CPs by the theoretical equation, the result illustrated that the introduction of more hydrophobic units of C₂NVP suppressed the hydrophilic interaction between the polymer chain and water. We then successfully proceeded the chain extension through the ring-opening polymerization (ROP) of ε-caprolactone (CL) to the synthesis of a novel P(C₂NVP-co-NVP)-b-PCL amphiphilic block copolymer (Mn,NMR = 14,730 and Mw/Mn = 1.59). The critical micelle concentration (CMC) of the block copolymer had a value of ca. 1.46 × 10-4 g/L. The block copolymer micelle was traced by dynamic light scattering (DLS), obtaining thermosensitive behaviors with a particle size of ca. 240 nm at 25 °C and ca. 140 nm at 55 °C, respectively.

Oxygen and Carbon Dioxide Dual Gas-Switchable Thermoresponsive Homopolymers

Herein, we report the first oxygen (O₂) and carbon dioxide (CO₂) dual gas-switchable thermoresponsive polymers based on a newly synthesized monomer N-(2-fluoroethyl amide)-N-(2-(diethylamino)ethyl) acrylamide, that is, AM(F1EA-DEAE), which bears both O₂-switchable fluorinated ethyl amide (F1EA) and CO₂-switchable N,N-diethylamino ethyl (DEAE) moieties on its side chain. PolyAM(F1EA-DEAE) samples prepared from reversible addition-fragmentation chain transfer (RAFT) polymerization exhibited good temperature-responsive properties. Their inherent low critical solution temperature (LCST) could be reversibly tuned to different levels by respectively purging O₂ or CO₂ into its aqueous solution. The O₂-treatment shifted LCST to a higher temperature, while the CO₂-treatment made the polymer fully water-soluble. The polymer could be readily recovered to its initial state by washing off the trigger gas with an inert gas such as nitrogen. This work provides an effective monomer design approach for the preparation of O₂ and CO₂ dual gas-responsive polymers.

CO2-responsive polymeric materials: synthesis, self-assembly, and functional applications

CO2 is an ideal trigger for switchable or stimuli-responsive materials because it is benign, inexpensive, green, abundant, and does not accumulate in the system. Many different CO2-responsive materials including polymers, latexes, solvents, solutes, gels, surfactants, and catalysts have been prepared. This review focuses on the preparation, self-assembly, and functional applications of CO2-responsive polymers. Detailed discussion is provided on the synthesis of CO2-responsive polymers, in particular using reversible deactivation radical polymerization (RDRP), formerly known as controlled/living radical polymerization (CLRP), a powerful technique for the preparation of well-defined (co)polymers with precise control over molecular weight distribution, chain-end functional groups, and polymer architectural design. Self-assembly in aqueous dispersed media is highlighted as well as emerging potential applications.

Polymer nanoparticles self-assembled from photo-, pH- and thermo-responsive azobenzene-functionalized PDMAEMA

Polymer nanoparticles self-assembled from an amphiphilic azobenzene-functionalized PDMAEMA have been constructed, the morphological changes of which under stimulation of UV light, temperature and pH changes are demonstrated.

Dual thermo- and light-responsive dendron-jacketed homopolymers containing photoswitchable azobenzene groups via a macromonomer route

The novel dendron-jacketed homopolymer containing photoswitchable azobenzene groups and short oligo(ethylene glycol) (OEG) units was synthesized via a macromonomer route, which can exhibit interesting dual thermo- and light-responsive behaviours.

Triple-Stimuli-Responsive Ferrocene-Containing PEGs in Water and on the Surface

Triple-stimuli-responsive PEG-based materials are prepared by living anionic ring-opening copolymerization of ethylene oxide and vinyl ferrocenyl glycidyl ether and subsequent thiol-ene postpolymerization modification with cysteamine. The hydrophilicity of these materials can be tuned by three stimuli: (i) temperature (depending on the comonomer ratio), (ii) oxidation state of iron centers in the ferrocene moieties, and (iii) pH-value (through amino groups), both in aqueous solution and at the interface after covalent attachment to a glass surface. In such materials, the cloud point temperatures are adjustable in solution by changing oxidation state and/or pH. On the surface, the contact angle increases with increasing pH and temperature and after oxidation, making these smart surfaces interesting for catalytic applications. Also, their redox response can be switched by temperature and pH, making this material useful for catalysis and electrochemistry applications. Exemplarily, the temperature-dependent catalysis of the chemiluminescence of luminol (a typical blood analysis tool in forensics) was investigated with these polymers.

Three-Component Supramolecular System with Multistimuli-Responsive Properties in Water

Hyperbranched polyethylenimine terminated with isobutyramide groups (HPEI-IBAm), 4-(phenylazo)benzoic acid (PABA), and α-cyclodextrin (α-CD) were assembled together at pH≈7 to form the three-component supramolecular complexes that were verified by (1) H and 2D ROESY (1) H NMR spectroscopy. UV/Vis spectrometric titration experiments showed that the content of α-CD in the three-component complexes was less than the feed amount and it was difficult for all the PABA units in the complexes to further form complexes with α-CD. The obtained three-component supramolecular complexes exhibited thermoresponsive properties in water. Increasing the α-CD concentration led to a sharp increase in the cloud point temperature (Tcp ) at the beginning, but after the [α-CD]/[PABA] ratio was in the region of 1.3-1.6, the Tcp increased gradually When the concentration of α-CD was low, a higher concentration of PABA led to a lower Tcp , however, the opposite was observed when the concentration of α-CD was high. For the three-component complex, increasing the α-CD concentration at pH≈7 or at pH≈9 led to different Tcp temperatures. In the low α-CD concentration range, adjusting the pH from ≈7-≈9 resulted in an increase in the Tcp , similar but not so pronounced as that of the two-component system of HPEI-IBAm/[PABA]. When the concentration of α-CD was high, adjusting the pH from ≈7-≈9 decreased the Tcp ; this observation is different to that of the two-component system of HPEI-IBAm/[PABA]. Reversible trans-to-cis photoisomerization of azobenzene units in the complexes occurred, following irradiation with UV or visible light. Trans-to-cis isomerization of azobenzene units decreased the Tcp . However, this result differed to that of the two-component system of HPEI-IBAm/PABA.

Stimuli-induced multiple dissociation and micellization transitions of random copolymers

Upon UV irradiation, random copolymer P(NBMA-co-MEO₂MA-co-OEGMA) was converted into P(MAA-co-MEO₂MA-co-OEGMA) with disruption of the initial micelles. Further increasing the temperature or decreasing the pH induced the reformation of micelles.

Smart functional polymers – a new route towards creating a sustainable environment

Smart functional polymers have gained a huge amount of interest in recent times due to their innumerable applications in areas including sensors, actuators, switchable wettability, bio-medical and environmental applications.

Multi-stimuli responsive polymers – the all-in-one talents

The integration of several responsive moieties within one polymer yields smart polymers exhibiting a multifaceted responsive behaviour.

Thermo-sensitive zwitterionic block copolymers via ATRP

Novel thermo-sensitive zwitterionic block copolymers synthesized by ATRP exhibited distinct thermo-sensitivity and excellent antifouling property.

Thermo-, pH-, and Light-Responsive Supramolecular Complexes Based on a Thermoresponsive Hyperbranched Polymer

Hyperbranched polyethylenimine terminated with isobutyramide groups (HPEI-IBAm) was mixed with 4-(phenylazo)benzoic acid (PABA) to form supramolecular complexes through the neutralization reaction between the amino groups of HPEI-IBAm and the carboxylic acid group of PABA, which was verified by ¹H and 2D NOESY ¹H NMR spectroscopy. The obtained supramolecular complexes with a molar ratio of PABA to HPEI-IBAm of ≤8 were soluble in water and exhibited thermoresponsive properties. Their cloud point temperature (T_cp) was sensitive to PABA content, and PABA molecules were exchanged between HPEI-IBAm hosts. The topology of the polymer affected the change in T_cp of the complexes. At pH ∼7, increasing the PABA content decreased T_cp, whereas it caused T_cp to increase at pH ∼9. Reversible trans-to-cis photoisomerization of azobenzene units in the complexes occurred following irradiation with UV or visible light. At pH ∼7, trans-to-cis isomerization of azobenzene units increased T_cp, whereas the opposite occurred at pH ∼9.

Aqueous polymeric sensors based on temperature-induced polymer phase transitions and solvatochromic dyes

This feature article provides, for the first time, an overview of the research that guided the way from fundamental studies of the thermo-responsive phase separation of aqueous polymer solutions to polymeric sensor systems. The incorporation of solvatochromic dyes into thermoresponsive polymers as well as the concepts of polymeric sensors are presented and discussed in detail.