Emerging Trends in the Chemistry of End-to-End Depolymerization

Over the past couple of decades, polymers that depolymerize end-to-end upon cleavage of their backbone or activation of a terminal functional group, sometimes referred to as "self-immolative" polymers, have been attracting increasing attention. They are of growing interest in the context of enhancing polymer degradability but also in polymer recycling as they allow monomers to be regenerated in a controlled manner under mild conditions. Furthermore, they are highly promising for applications as smart materials due to their ability to provide an amplified response to a specific signal, as a single sensing event is translated into the generation of many small molecules through a cascade of reactions. From a chemistry perspective, end-to-end depolymerization relies on the principles of self-immolative linkers and polymer ceiling temperature (Tc). In this article, we will introduce the key chemical concepts and foundations of the field and then provide our perspective on recent exciting developments. For example, over the past few years, new depolymerizable backbones, including polyacetals, polydisulfides, polyesters, polythioesters, and polyalkenamers, have been developed, while modern approaches to depolymerize conventional backbones such as polymethacrylates have also been introduced. Progress has also been made on the topological evolution of depolymerizable systems, including the introduction of fully depolymerizable block copolymers, hyperbranched polymers, and polymer networks. Furthermore, precision sequence-defined oligomers have been synthesized and studied for data storage and encryption. Finally, our perspectives on future opportunities and challenges in the field will be discussed.

Self-Immolative Polymers: An Emerging Class of Degradable Materials with Distinct Disassembly Profiles

Self-immolative polymers are an emerging class of macromolecules with distinct disassembly profiles that set them apart from other general degradable materials. These polymers are programmed to disassemble spontaneously from head to tail, through a domino-like fragmentation, upon response to extremal stimuli. In the time since we first reported this unique type of molecule, several groups around the world have developed new, creative molecular structures that perform analogously to our pioneering polymers. Self-immolative polymers are now widely recognized as an important class of stimuli-responsive materials for a wide range of applications such as signal amplification, biosensing, drug delivery, and materials science. The quinone-methide elimination was shown to be an effective tool to achieve rapid domino-like fragmentation of polymeric molecules. Thus, numerous applications of self-immolative polymers are based on this disassembly chemistry. Although several other fragmentation reactions achieved the function requested for sequential disassembly, we predominantly focused in this Perspective on examples of self-immolative polymers that disassemble through the quinone-methide elimination. Selected examples of self-immolative polymers that disassembled through other chemistries are briefly described. The growing demand for stimuli-responsive degradable materials with novel molecular backbones and enhanced properties guarantees the future interest of the scientific community in this unique class of polymers.

Poly(carboxypyrrole)s That Depolymerize from Head to Tail in the Solid State in Response to Specific Applied Signals

This Article describes the design, synthesis, and analysis of a new class of polymer that is capable of depolymerizing continuously, completely, and cleanly from head to tail when a detection unit on the head of the polymer is exposed to a specific applied signal. The backbone of this polymer consists of 1,3-disubstituted pyrroles and carboxy linkages similar to polyurethanes. Diverse side chains or reactive end-groups can be introduced readily, which provides modular design of polymer structure. The designed depolymerization mechanism proceeds through spontaneous release of carbon dioxide and azafulvene in response to a single triggering reaction with the detection unit. These poly(carboxypyrrole)s depolymerize readily in nonpolar environments, and even in the bulk as solid-state plastics.

Dynamic pH responsivity of triazole-based self-immolative linkers

Gating the release of chemical payloads in response to transient signals is an important feature of ‘smart’ delivery systems. Herein, we report a triazole-based self-immolative linker that can be reversibly paused or slowed and restarted throughout its elimination cascade in response to pH changes in both organic and organic-aqueous solvents. The linker is conveniently prepared using the alkyne–azide cycloaddition reaction, which introduces a 1,4-triazole ring that expresses a pH-sensitive intermediate during its elimination sequence. Using a series of model compounds, we demonstrate that this intermediate can be switched between active and dormant states depending on the presence of acid or base, cleanly gating the release of payload in response to a fluctuating external stimulus.

Triazole-based self-immolative linkers can be reversibly paused and restarted throughout their elimination cascades in response to environmental pH changes.

Synthesis and mechanistic investigations of pH-responsive cationic poly(aminoester)s

The synthesis and degradation mechanisms of a class of pH-sensitive, rapidly degrading cationic poly(α-aminoester)s are described. These reactive, cationic polymers are stable at low pH in water, but undergo a fast and selective degradation at higher pH to liberate neutral diketopiperazines. Related materials incorporating oligo(α-amino ester)s have been shown to be effective gene delivery agents, as the charge-altering degradative behavior facilitates the delivery and release of mRNA and other nucleic acids in vitro and in vivo. Herein, we report detailed studies of the structural and environmental factors that lead to these rapid and selective degradation processes in aqueous buffers. At neutral pH, poly(α-aminoester)s derived from N-hydroxyethylglycine degrade selectively by a mechanism involving sequential 1,5- and 1,6-O→N acyl shifts to generate bis(N-hydroxyethyl) diketopiperazine. A family of structurally related cationic poly(aminoester)s was generated to study the structural influences on the degradation mechanism, product distribution, and pH dependence of the rate of degradation. The kinetics and mechanism of the pH-induced degradations were investigated by 1H NMR, model reactions, and kinetic simulations. These results indicate that polyesters bearing α-ammonium groups and appropriately positioned N-hydroxyethyl substituents are readily cleaved (by intramolecular attack) or hydrolyzed, representing dynamic "dual function" materials that are initially polycationic and transform with changing environment to neutral products.

Disulfide-Based Self-Immolative Linkers and Functional Bioconjugates for Biological Applications

It is of vital importance to reversibly mask and selectively activate bioactive agents for advanced therapeutic and diagnostic purposes, aiming to efficiently suppress background interferences and attenuate systemic toxicity. This strategy has been involved in diverse applications spanning from chemical/biological sensors and diagnostics to drug delivery nanocarriers. Among these, redox-responsive disulfide linkages have been extensively utilized by taking advantage of extracellular and intracellular glutathione (GSH) gradients. However, direct conjugation of cleavable triggers to bioactive agents through disulfide bonds suffers from bulky steric hindrance and limited choice of trigger-drug combinations. Fortunately, the emergence of disulfide self-immolative linkers (DSILs) provides a general and robust strategy to not only mask various bioactive agents through the formation of dynamic disulfide linkages but also make it possible to be selectively activated upon disulfide cleavage in the reductive cytoplasmic milieu. In this review, recent developments in DSILs are focused with special attention on emerging chemical design strategies and functional applications in the biomedical field.

Functionalizable, Side Chain-Immolative Poly(benzyl ether)s

Herein, we report a poly(benzyl ether)-based self-immolative polymer (SIP) with pendant pyridine disulfide groups. Cleavage of the side-chain disulfides leads to the formation of phenolates, which initiate depolymerization from the side chain. Due to the higher density of the disulfide groups compared to that of the chain-end-capping group, which normally is responsible for initiating depolymerization of SIPs, the side chain-immolative polymer (ScIP) can be readily degraded in the solid state where the mobility of polymer chains is substantially limited. The ScIP was also further modified through the thiol-disulfide exchange reaction to prepare ScIP-g-poly(ethylene glycol) graft polymers and organogels, which were also able to undergo complete reductive self-immolative degradation.

Photoinduced Degradation of Polymer Films Using Polyglyoxylate-Polyester Blends and Copolymers

Polymeric coatings are commonly employed to alter surface properties. While some coatings are designed to remain stable over a prolonged period, in applications such as pharmaceuticals or fertilizers, the coating is designed to erode and reveal or release the underlying material. Self-immolative polymers (SIPs) undergo depolymerization following the cleavage of stimuli-responsive end-caps from their termini, enabling controlled depolymerization in the solid state and in solution. Poly(ethyl glyoxylate) (PEtG) is a promising SIP because of its depolymerization to benign products, but its amorphous structure and low glass-transition temperature make it unsuitable alone for coating applications. This study explored the blending of PEtG with polyesters including polycaprolactone (PCL), poly(l-lactic acid), and poly(R-3-hydroxybutyrate). Block copolymers of PEtG with PCL were also synthesized and studied. It was found that the phase separation behavior and consequently the thermal and mechanical properties of the materials could be tuned according to the composition of the blend, while the stimuli-responsive degradation of PEtG was retained in the blends. This work therefore provides a framework for the application of PEtG-based coatings in applications ranging from pharmaceuticals to agricultural products.

Hybrid Polyester Self-Immolative Polymer Nanoparticles for Controlled Drug Release

Delivery systems have been developed to address problematic properties of drugs, but the specific release of drugs at their targets is still a challenge. Polymers that depolymerize end-to-end in response to the cleavage of stimuli-responsive end-caps from their termini, commonly referred to as self-immolative polymers, offer high sensitivity to stimuli and have potential for the development of new high-performance delivery systems. In this work, we prepared hybrid particles composed of varying ratios of self-immolative poly(ethyl glyoxylate) (PEtG) and slowly degrading poly(d,l-lactic acid) (PLA). These systems were designed to provide a dual release mechanism consisting of a rapid burst release of drug from the PEtG domains and a slower release from the PLA domains. Using end-caps responsive to UV light and reducing thiols, it was found that triggered particles exhibited partial degradation, as indicated by a reduction in their dynamic light-scattering count rate that depended on the PEtG:PLA ratio. The particles were also shown to release the hydrophobic dye Nile red and the drug celecoxib in a manner that depended on triggering and the PEtG:PLA ratio. In vitro toxicity assays showed an effect of the stimuli on the toxicity of the celecoxib-loaded particles but also suggested it would be ideal to replace the sodium cholate surfactant that was used in the particle synthesis procedure in order to reduce the background toxicity of the delivery system. Overall, these hybrid systems show promise for tuning and controlling the release of drugs in response to stimuli.

Redox-Responsive Polymer with Self-Immolative Linkers for the Release of Payloads

Previous couplings of corrosion inhibitors to redox-responsive polymers via covalent bonding suffer from several drawbacks. It is presented here novel redox-responsive polymer-corrosion inhibitor conjugates that contain self-immolative linkers in their side chains. Very fast redox-induced release of tryptamine, a drug and a corrosion inhibitor, is observed after applying a reductive trigger.

Tuning the hydrophobic cores of self-immolative polyglyoxylate assemblies

Amphiphilic block copolymers containing different self-immolative polyglyoxylates were synthesized and self-assembled to provide drug carriers with variable celecoxib loading capacities and release rates, as well as different in vitro toxicities.

Biomimetic antimicrobial polymers: recent advances in molecular design

The increasing prevalence of antibiotic-resistant bacterial infections, coupled with the decline in the number of new antibiotic drug approvals, has created a therapeutic gap that portends an emergent public health crisis.

Novel Biodegradable Polymer with Redox-Triggered Backbone Cleavage Through Sequential 1,6-Elimination and 1,5-Cyclization Reactions

In the past decade, the self-immolative biodegradable polymer arose as a novel paradigm for its efficient degradation mechanism and vast potential for advanced biomedical applications. This study reports successful synthesis of a novel biodegradable polymer capable of self-immolative backbone cleavage. The monomer is designed by covalent conjugations of both pendant redox-trigger (p-nitrobenzyl alcohol) and self-immolative linker (p-hydroxybenzyl alcohol) to the cyclization spacer (n-2-(hydroxyethyl)ethylene diamine), which serves as the structural backbone. The polymerization of the monomer with hexamethylene diisocyanate yields a linear redox-sensitive polymer that can systemically degrade via sequential 1,6-elimination and 1,5-cyclization reactions within an effective timeframe. Ultimately, the polymer's potential for biomedical application is simulated through in vitro redox-triggered release of paclitaxel from polymeric nanoparticles.

Low-Ceiling-Temperature Polymer Microcapsules with Hydrophobic Payloads via Rapid Emulsion-Solvent Evaporation

We report a microencapsulation procedure based on rapid solvent evaporation to prepare microcapsules with hydrophobic core materials and low-ceiling-temperature polymer shell wall of cyclic poly(phthalaldehyde) (cPPA). We use and compare microfluidic and bulk emulsions. In both methods, rapid solvent evaporation following emulsification resulted in kinetically trapped core-shell microcapsules, whereas slow evaporation resulted in acorn morphology. Through the systematic variation of encapsulation parameters, we found that polymer-to-core weight ratios higher than 1 and polymer concentrations higher than 4.5 wt % in the oil phase were required to obtain a core-shell structure. This microencapsulation procedure enabled the fabrication of microcapsules with high core loading, controlled size, morphology, and stability. This procedure is versatile, allowing for the encapsulation of other hydrophobic core materials, i.e., mineral oil and organotin catalyst, or using an alternative low-ceiling-temperature polymer shell wall, poly(vinyl tert-butyl carbonate sulfone).

Self-immolative spacers: kinetic aspects, structure-property relationships, and applications

Self-immolative spacers are covalent assemblies tailored to correlate the cleavage of two chemical bonds after activation of a protective part in a precursor: Upon stimulation, the protective moiety is removed, which generates a cascade of disassembling reactions leading to the temporally sequential release of smaller molecules. Originally introduced to overcome limitations for drug delivery, self-immolative spacers have gained wide interest in medicinal chemistry, analytical chemistry, and material science. For most applications, the kinetics of the disassembly of the activated self-immolative spacer governs functional properties. This Review addresses kinetic aspects of self-immolation. It provides information for selecting a particular self-immolative motif for a specific demand. Moreover, it should help researchers design kinetic experiments and fully exploit the rich perspectives of self-immolative spacers.

Multiresponsive Azobenzene End-Cap for Self-Immolative Polymers

Azobenzene was introduced as a new multiresponsive end-cap for self-immolative polymers. Using small-molecule model compounds, it was demonstrated that reducing agents including hydrazine and dithiothreitol could reduce the azobenzene to the corresponding hydrazobenzene, resulting in a 1,6-elimination reaction with the potential to initiate the depolymerization of self-immolative polycarbamates. An activated azobenzene derivative was then prepared, allowing for its incorporation as an end-cap for polycarbamates based on alternating N,N'-dimethylethylene diamine and 4-hydroxybenzyl alcohol. Upon treatment with hydrazine, depolymerization proceeded. To demonstrate the versatility of this end-cap, the chemistry was also applied to polycarbamates based on 4-aminobenzyl alcohol. In addition to allowing triggered depolymerization, the azobenzene end-cap also provides a visual signal upon triggering owing to the strong visible absorption of the azobenzene, which shifts to the UV range upon reduction. Furthermore, azobenzene is capable of undergoing trans-cis isomerization in response to UV light, providing multiple functions in a single end-cap.

Redox-sensitive materials for drug delivery: targeting the correct intracellular environment, tuning release rates, and appropriate predictive systems

SIGNIFICANCE

The development of responsive drug delivery systems (DDS) holds great promise as a tool for improving the pharmacokinetic properties of drug compounds. Redox-sensitive systems are particularly attractive given the rich variety of redox gradients present in vivo. These gradients, where the circulation is generally considered oxidizing and the cellular environment is substantially more reducing, provide attractive options for targeted, specific cargo delivery.

RECENT ADVANCES

Experimental evidence suggests that a "one size fits all" redox gradient does not exist. Rather, there are subtle differences in redox potential within a cell, while the chemical nature of reducing agents in these microenvironments varies. Recent works have demonstrated an ability to modulate the degradation rate of redox-susceptible groups and, hence, provide new tools to engineer precision-targeted DDS.

CRITICAL ISSUES

Modern synthetic and macromolecular chemistry provides access to a wide range of redox-susceptible architectures. However, in order to utilize these in real applications, the actual chemical nature of the redox-susceptible group, the sub-cellular location being targeted, and the redox microenvironment being encountered should be considered in detail. This is critical to avoid the over-simplification possible when using non-biological reducing agents, which may provide inaccurate kinetic information, and to ensure these materials can be advanced beyond simple "on/off" systems. Furthermore, a strong case can be made for the use of biorelevant reducing agents such as glutathione when demonstrating a materials redox response.

FUTURE DIRECTIONS

A further understanding of the complexities of the extra- and intracellular microenvironments would greatly assist with the design and application of DDS.

Continuous Head-to-Tail Depolymerization: An Emerging Concept for Imparting Amplified Responses to Stimuli-Responsive Materials

Polymers that depolymerize continuously and completely from head-to-tail when a reaction-based detection unit is cleaved from the polymer provide both selective and amplified responses, a rare combination, to stimuli-responsive polymeric materials. This Viewpoint contextualizes this new class of depolymerizable polymers and outlines the key areas for growth and innovation.

Depolymerizable, adaptive supramolecular polymer nanoparticles and networks

Depolymerizable polymers are appended with supramolecular cross-linking motifs to enable preparation of tunable single-chain polymeric nanoparticles and degradable polymer networks.

Amplified release through the stimulus triggered degradation of self-immolative oligomers, dendrimers, and linear polymers

In recent years, numerous delivery systems based on polymers, dendrimers, and nano-scale assemblies have been developed to improve the properties of drug molecules. In general, for the drug molecules to be active, they must be released from these delivery systems, ideally in a selective manner at the therapeutic target. As the changes in physiological conditions are relatively subtle from one tissue to another and the concentrations of specific enzymes are often quite low, a release strategy involving the amplification of a biological signal is particularly attractive. This article describes the development of oligomers, dendrimers, and linear polymers based on self-immolative spacers. This new class of molecules is designed to undergo a cascade of intramolecular reactions in response to the cleavage of a trigger moiety, resulting in molecular fragmentation and the release of multiple reporter or drug molecules. Progress in the development of these materials as drug delivery vehicles and sensors will be highlighted.