Bifunctional RAFT Agent Directed Preparation of Polymer/Graphene Oxide Composites

Polymer/graphene oxide (GO) composites, which combine the physical properties of GO and the processability of polymers, are of increasing interest in a variety of applications ranging from conductive foams, sensors, to bioelectronics. However, the preparation of these composites through physical blending demands the polymers with functional groups that interact strongly with the GO. Here the design and synthesis of a new bifunctional reversible addition-fragmentation chain transfer (RAFT) agent are demonstrated, which allows the synthesis of polymers with predetermined molecular weights and low dispersibilities (Ð), while having functionalities at both polymer termini that allow strong binding to GO. To access polymers with diverse thermal and mechanical properties, acrylonitrile-styrene-acrylate (ASA) copolymers with different types of acrylates, both short and long side chains, are synthesized under the control of the bifunctional RAFT agent. Furthermore, the strong binding between GO and the synthesized polymers is verified and explored to prepare polymer/GO composites with diverse tensile strengths and conductivity in the range of semiconductors. Overall, this novel RAFT agent is expected to expand the utility of polymer/GO composites by providing well-defined polymers with tunable properties and strong binding with GO.

Development of Graphene-Based Polymeric Nanocomposites: A Brief Overview

Graphene (G) and its derivatives, such as graphene oxide (GO) and reduced GO (rGO), have outstanding electrical, mechanical, thermal, optical, and electrochemical properties, owed to their 2D structure and large specific surface area. Further, their combination with polymers leads to novel nanocomposites with enhanced structural and functional properties due to synergistic effects. Such nanocomposites are becoming increasingly useful in a wide variety of fields ranging from biomedicine to the electronics and energy storage applications. In this review, a brief introduction on the aforementioned G derivatives is presented, and different strategies to develop polymeric nanocomposites are described. Several functionalization methods including covalent and non-covalent approaches to increase their interaction with polymers are summarized, and selected examples are provided. Further, applications of this type of nanocomposites in the field of energy are discussed, including lithium-ion batteries, supercapacitors, transparent conductive electrodes, counter electrodes of dye-sensitized solar cells, and active layers of organic solar cells. Finally, the challenges and future outlook for G-based polymeric nanocomposites are discussed.

Miniemulsion polymerization of styrene using carboxylated graphene quantum dots as surfactant

Carboxylated graphene quantum dots (cGQDs) were synthesized from dextrose and sulfuric acid via a hydrothermal process, and subsequently used as sole surfactant in miniemulsion polymerization of styrene.

Miniemulsion polymerization using carboxylated graphene quantum dots as surfactants: effects of monomer and initiator type

The effectiveness of carboxylated graphene quantum dots (cGQDs) as sole surfactants have been investigated in miniemulsion polymerization of 8 different vinyl monomers, initiated by oil-soluble initiator AIBN and water-soluble initiator VA-044.

Polymer grafting on graphene layers by controlled radical polymerization

In situ controlled radical polymerization (CRP) is considered as an important approach to graft polymer brushes with controlled grafting density, functionality, and thickness on graphene layers. Polymers are tethered with chain end or through its backbone to the surface or edge of graphene layers with two in situ polymerization methods of "grafting from" and "grafting through" and also a method based on coupling reactions known as "grafting to". The "grafting from" method relies on the propagation of polymer chains from the surface- or edge-attached initiators. The "grafting through" method is based on incorporation of double bond-modified graphene layers into polymer chains through the propagation reaction. The "grafting to" technique involves attachment of pre-fabricated polymer chains to the graphene substrate. Here, physical and chemical attachment approaches are also considered in polymer-modification of graphene layers. Combination of CRP mechanisms of reversible activation, degenerative (exchange) chain transfer, atom transfer, and reversible chain transfer with various kinds of grafting reactions makes it possible to selectively functionalize graphene layers. The main aim of this review is assessment of the recent advances in the field of preparation of polymer-grafted graphene substrates with well-defined polymers of controlled molecular weight, thickness, and polydispersity index. Study of the opportunities and challenges for the future works in controlling of grafting density, site-selectivity in grafting, and various topologies of the brushes with potential applications in stimuli-responsive surfaces, polymer composites, Pickering emulsions, coating technologies, and sensors is also considered.

The preparation of carbon nanofillers and their role on the performance of variable polymer nanocomposites

New synergic behavior is always inspiring scientists toward the formation of nanocomposites aiming at getting advanced materials with superior performance and/or novel properties. Carbon nanotubes (CNT), graphene, fullerene, and graphite as carbon-based are great fillers for polymeric materials. The presence of these materials in the polymeric matrix would render it several characteristics, such as electrical and thermal conductivity, magnetic, mechanical, and as sensor materials for pressure and other environmental changes. This review presents the most recent works in the use of CNT, graphene, fullerene, and graphite as filler in different polymeric matrixes. The primary emphasis of this review is on CNT preparation and its composites formation, while others carbon-based nano-fillers are also introduced. The methods of making polymer nanocomposites using these fillers and their impact on the properties obtained are also presented and discussed.

Recent advances in colloidal nanocomposite designviaheterogeneous polymerization techniques

Recent advances in colloidal nanocomposite design by heterogeneous polymerization are reviewed, with a specific focus on encapsulation and particle-based stabilization for specific materials applications.

Synthesis of polymeric nanoparticles containing reduced graphene oxide nanosheets stabilized by poly(ionic liquid) using miniemulsion polymerization

Polymeric nanoparticles containing reduced graphene oxide (rGO) nanosheets have been prepared by aqueous miniemulsion radical polymerization of methyl methacrylate (MMA) utilizing poly(ionic liquid) (PIL) as stabilizer to effectively disperse the rGO nanosheets in the monomer phase. The PIL that gave the best results in terms of rGO dispersibility was a block copolymer of the ionic liquid monomer 1-(2-methacryloyloxyethyl)-3-butylimidazolium bis(trifluoromethanesulfonyl)amide ([Mbim][TFSA]) and MMA, the concept being that the MMA units impart solubility in the MMA monomer droplets whereas the IL units act as adsorption sites for rGO. The rGO dispersibility in vinyl monomer was demonstrated to be superior using the above PIL block copolymer compared to the corresponding statistical copolymer or PIL homopolymer. Overall, the approach developed demonstrates how PILs can be employed to conveniently switch (turn ON/OFF) the dispersibility of PIL/rGO via anion exchange reactions, which can be an efficient strategy for synthesis of polymer/rGO nanocomposite materials.

Polymer-inorganic hybrid nanoparticles of various morphologies via polymerization-induced self assembly and sol–gel chemistry

The preparation of polymer-silica hybrid nanoparticles of various morphologies is reported.

Latex routes to graphene-based nanocomposites

This review article describes recent advances in the elaboration of graphene-based colloidal nanocomposites by the use of graphene or graphene oxide in heterophase polymerization systems.

Nanocomposites of graphene/polymers: a review

Graphene-based nanofillers and their applications. Fabrication methods of graphene-based nanocomposites. Interaction and dispersion of graphene-based fillers in polymer matrices. Current trends and prospects of graphene-based nanocomposites.

Hypercrosslinked porous polymer nanosheets: 2D RAFT agent directed emulsion polymerization for multifunctional applications

2D hyper-cross-linked microporous polymers (2D HCPs) were synthesized by emulsion polymerization using trithiocarbonate functionalized graphene oxide as 2D macromolecular CTA.

Recent advances in the preparation of hybrid nanoparticles in miniemulsions

In this review, we summarize recent advances in the synthesis of hybrid nanoparticles in miniemulsions since 2009. These hybrid nanoparticles include organic-inorganic, polymeric, and natural macromolecule/synthetic polymer hybrid nanoparticles. They may be prepared through encapsulation of inorganic components or natural macromolecules by miniemulsion (co)polymerization, simultaneous polymerization of vinyl monomers and vinyl-containing inorganic precursors, precipitation of preformed polymers in the presence of inorganic constituents through solvent displacement techniques, and grafting polymerization onto, from or through natural macromolecules. Characterization, properties, and applications of hybrid nanoparticles are also discussed.

Electrochemical sensor based on magnetic graphene oxide@gold nanoparticles-molecular imprinted polymers for determination of dibutyl phthalate

A novel composite of magnetic graphene oxide @ gold nanoparticles-molecular imprinted polymers (MGO@AuNPs-MIPs) was synthesized and applied as a molecular recognition element to construct dibutyl phthalate (DBP) electrochemical sensor. The composite of MGO@AuNPs was first synthesized using coprecipitation and self-assembly technique. Then the template molecules (DBP) were absorbed at the MGO@AuNPs surface due to their excellent affinity, and subsequently, selective copolymerization of methacrylic acid and ethylene glycol dimethacrylate was further achieved at the MGO@AuNPs surface. Potential scanning was presented to extract DBP molecules from the imprinted polymers film rapidly and completely. As a consequence, an electrochemical sensor for highly sensitive and selective detection of DBP was successfully constructed as demonstration based on the synthesized MGO@AuNPs-MIPs composite. Under optimal experimental conditions, selective detection of DBP in a linear concentration range of 2.5 × 10(-9)-5.0 × 10(-6)mol/L was obtained. The new DBP electrochemical sensor also exhibited excellent repeatability, which expressed as relative standard deviation (RSD) was about 2.50% for 30 repeated analyses of 2.0 × 10(-6)mol/L DBP.

Preparation of Composite Materials by Using Graphene Oxide as a Surfactant in Ab Initio Emulsion Polymerization Systems

In this letter, we report a simple and unexpected method of producing polymer-graphene oxide (GO) composite materials via ab initio emulsion polymerization in water. On the basis of the recent reports concerning the surfactant-like behavior of GO for stabilizing oil-in-water emulsions, we prepared exfoliated GO sheets with lateral dimension approximately 200 nm for use as surfactant in the emulsion polymerization of styrene. We observed an expected "classic" surfactant behavior to produce stable nanoparticles at extremely low GO loadings (<0.1% w/w); however, at higher concentrations a highly aggregated, fibrous morphology was formed. This morphology is predominantly due to the electrolyte concentration (ionic strength) of the aqueous phase resulting in heterocoagulation of growing oligomers with dispersed GO sheets, which offers a convenient route toward preparing hybrid materials.