Growing poly(N -vinylcarbazole) from the surface of graphene oxide via RAFT polymerization

A Facile Fabrication of CdSe/ZnS QDs—Block Copolymer Brushes-Modified Graphene Oxide Nanohybrid with Temperature-Responsive Behavior

In this paper, we described a straightforward one-step chemical method for the synthesis of semiconductor quantum dots(QDs)—block copolymer brushes functionalized graphene oxide(GO) fluorescence nanohybrids. The azobenzene-terminated block copolymer poly(N-isopropylacrylamid)-b-poly(styrene-co-5-(2-methacryoylethyloxymethyl)-8-quinolinol)(PNIPAM-b-P(St-co-MQ)) was modified on the surface of GO sheets via host–guest interactions between β-cyclodextrin-modified GO and azobenzene moieties, and simultaneously CdSe/ZnS QDs were integrated on the block copolymer brushes through the coordination between 8-hydroxyquinoline units in the polymer brushes and CdSe/ZnS QDs. The resulting fluorescence nanohybrid exhibited dual photoluminescence at 620 nm and 526 nm, respectively, upon excitation at 380 nm and LCST-type thermo-responsive behavior which originated from the change in the PNIPAM conformation in the block copolymer brushes of GO sheets.

Hydrophobic and antifouling modification of graphene oxide with functionalized polynorbornene by surface-initiated ring-opening metathesis polymerization

Surface-initiated ring-opening metathesis polymerization (SI-ROMP), based on the design of hydrophobic and antifouling monomers, was employed for the synthesis of grafting-modified graphene oxide (GO).

Nanoengineering with RAFT polymers: from nanocomposite design to applications

Reversible addition–fragmentation chain-transfer (RAFT) polymerization is a powerful tool for the precise formation of macromolecular building blocks that can be used for the construction of well-defined nanocomposites.

Nitrated Graphene Oxide Derived from Graphite Oxide: A Promising Energetic Two-Dimensional Material

In order to synthesize a novel two-dimensional energetic material, nitrated graphene oxide (NGO) was prepared by the nitrification of graphite oxide to make a functional modification. Based on the morphological characterization, the NGO has a greater degree of curl and more wrinkles on the surface. The structure characterization and density functional theory calculation prove that epoxy and hydroxyl groups on the edge of graphite oxide have reacted with nitronium cation (NO2+) to produce nitro and nitrate groups. Hydrophobicity of NGO implied higher stability in storage than graphene oxide. Synchronous simultaneous analysis was used to explore the decomposition mechanism of NGO preliminarily. The decomposition enthalpy of NGO is 662.0 J·g-1 and the activation energy is 166.5 kJ·mol-1. The thermal stability is similar to that of general nitrate energetic materials. The hygroscopicity, thermal stability and flammability of NGO prove that it is a novel two-dimensional material with potential applications as energetic additives in the catalyst, electrode materials and energetic devices.

Photoregulated reversible addition–fragmentation chain transfer (RAFT) polymerization

Different strategies on photoregulated RAFT polymerization are developed. This minireview summarizes recent advances in photoregulated RAFT polymerization and its applications.

Polymer grafting on graphene layers by controlled radical polymerization

In situ controlled radical polymerization (CRP) is considered as an important approach to graft polymer brushes with controlled grafting density, functionality, and thickness on graphene layers. Polymers are tethered with chain end or through its backbone to the surface or edge of graphene layers with two in situ polymerization methods of "grafting from" and "grafting through" and also a method based on coupling reactions known as "grafting to". The "grafting from" method relies on the propagation of polymer chains from the surface- or edge-attached initiators. The "grafting through" method is based on incorporation of double bond-modified graphene layers into polymer chains through the propagation reaction. The "grafting to" technique involves attachment of pre-fabricated polymer chains to the graphene substrate. Here, physical and chemical attachment approaches are also considered in polymer-modification of graphene layers. Combination of CRP mechanisms of reversible activation, degenerative (exchange) chain transfer, atom transfer, and reversible chain transfer with various kinds of grafting reactions makes it possible to selectively functionalize graphene layers. The main aim of this review is assessment of the recent advances in the field of preparation of polymer-grafted graphene substrates with well-defined polymers of controlled molecular weight, thickness, and polydispersity index. Study of the opportunities and challenges for the future works in controlling of grafting density, site-selectivity in grafting, and various topologies of the brushes with potential applications in stimuli-responsive surfaces, polymer composites, Pickering emulsions, coating technologies, and sensors is also considered.

Graphene and graphene oxide: Functionalization and nano-bio-catalytic system for enzyme immobilization and biotechnological perspective

Graphene-based nanomaterials have gained high research interest in different fields related to proteins and thus are rapidly becoming the most widely investigated carbon-based materials. Their exceptional physiochemical properties such as electrical, optical, thermal and mechanical strength enable graphene to render graphene-based nanostructured materials suitable for applications in different fields such as electroanalytical chemistry, electrochemical sensors and immobilization of biomolecules and enzymes. The structural feature of oxygenated graphene, i.e., graphene oxide (GO) covered with different functionalities such as epoxy, hydroxyl, and carboxylic group, open a new direction of chemical modification of GO with desired properties. This review describes the recent progress related to the structural geometry, physiochemical characteristics, and functionalization of GO, and the development of graphene-based novel carriers as host for enzyme immobilization. Graphene derivatives-based applications are progressively increasing, in recent years. Therefore, from the bio-catalysis and biotransformation viewpoint, the biotechnological perspective of graphene-immobilized nano-bio-catalysts is of supreme interest. The structural geometry, unique properties, and functionalization of graphene derivatives and graphene-based nanomaterials as host for enzyme immobilization are highlighted in this review. Also, the role of GO-based catalytic systems such as microfluidic bio-catalysis, enzyme-based biofuel cells, and biosensors are also discussed with potential future perspectives of these multifaceted materials.

Recent Advances in RAFT Polymerization: Novel Initiation Mechanisms and Optoelectronic Applications

Reversible addition-fragmentation chain transfer (RAFT) is considered to be one of most famous reversible deactivation radical polymerization protocols. Benefiting from its living or controlled polymerization process, complex polymeric architectures with controlled molecular weight, low dispersity, as well as various functionality have been constructed, which could be applied in wide fields, including materials, biology, and electrology. Under the continuous research improvement, main achievements have focused on the development of new RAFT techniques, containing fancy initiation methods (e.g., photo, metal, enzyme, redox and acid), sulfur-free RAFT system and their applications in many fields. This review summarizes the current advances in major bright spot of novel RAFT techniques as well as their potential applications in the optoelectronic field, especially in the past a few years.

A facile construction of Au nanoparticles on a copolymer ligand brushes modified graphene oxide nanoplatform with excellent catalytic properties

Au NPs were generated via in situ reduction on copolymer brush P(OEGMA-co-MQ) functionalized GO. MQ units in the brushes as capping agents could stabilize the Au NPs. The Au NPs–GO hybrid exhibited high catalytic activity for the reduction of 4-NP.

Hybridization of graphene sheets with polyethylene terephthalate through the process of in situ polymerization aided by ultrasound

A new methodology to prepare hybrid graphene–polyethylenterephthalate nanocomposites by ultrasonication is reported.

Organic Electronic Memory Devices

With the rapid development of the electronics industry in recent years, information technology devices, such as personal computers, mobile phones, digital cameras and media players, have become an essential part of our daily life. From both the technological and economic points of view, the development of novel information storage materials and devices has become an emergent issue facing the electronics industry. Due to the advantages of good scalability, flexibility, low cost, ease of processing, 3D-stacking capability and high capacity for data storage, organic-based electrical memory devices have been promising alternatives or supplementary devices to conventional inorganic semiconductor-based memory technology. The basic concepts and historical development of electronic memory devices are first presented. The following section introduces the structures and switching mechanisms of organic electronic memory devices classified as transistors, capacitors and resistors. Subsequently, the progress in the field of organic-based memory materials and devices is systematically summarized and discussed. Finally, the challenges posed to the development of novel organic electronic memory devices are summarized.

Nanocomposites of graphene/polymers: a review

Graphene-based nanofillers and their applications. Fabrication methods of graphene-based nanocomposites. Interaction and dispersion of graphene-based fillers in polymer matrices. Current trends and prospects of graphene-based nanocomposites.

Preparation of graphene/poly(2-hydroxyethyl acrylate) nanohybrid materials via an ambient temperature “grafting-from” strategy

PHEA polymer brushes were grownin situfrom the surface of graphene sheetsviaSET-LRP through a “grafting-from” strategy at ambient temperature to afford the PHEA/graphene hybrid material with excellent dispersibility in organic solvents.

Hypercrosslinked porous polymer nanosheets: 2D RAFT agent directed emulsion polymerization for multifunctional applications

2D hyper-cross-linked microporous polymers (2D HCPs) were synthesized by emulsion polymerization using trithiocarbonate functionalized graphene oxide as 2D macromolecular CTA.

Towards development of a versatile and efficient strategy for fabrication of GO based polymer nanocomposites

Graphene oxide was facilely functionalized with synthetic polymers in aqueous solution using dopamine as the adhesion component.

Polymer-based resistive memory materials and devices

Due to the advantages of good scalability, flexibility, low cost, ease of processing, 3D-stacking capability, and large capacity for data storage, polymer-based resistive memories have been a promising alternative or supplementary devices to conventional inorganic semiconductor-based memory technology, and attracted significant scientific interest as a new and promising research field. In this review, we first introduced the general characteristics of the device structures and fabrication, memory effects, switching mechanisms, and effects of electrodes on memory properties associated with polymer-based resistive memory devices. Subsequently, the research progress concerning the use of single polymers or polymer composites as active materials for resistive memory devices has been summarized and discussed. In particular, we consider a rational approach to their design and discuss how to realize the excellent memory devices and understand the memory mechanisms. Finally, the current challenges and several possible future research directions in this field have also been discussed.

Preparation of polymer decorated graphene oxide by γ-ray induced graft polymerization

Herein, we report a facile approach to decorate graphene oxide (GO) sheets with poly(vinyl acetate) (PVAc) by γ-ray irradiation-induced graft polymerization. The content of PVAc in the obtained sample, i.e., PVAc grafted GO (GO-g-PVAc) is calculated by the loss weight in thermogravimetric analysis (TGA) curves. A GO-g-PVAc sample with a degree of grafting (DG) of 28.5% was well dispersed in common organic solvents and the dispersions obtained were extremely stable at room temperature without any aggregation, even after standing for 2 months. The excellent dispersibility and stability of GO-g-PVAc in common organic solvents are readily rationalized in terms of the full coverage of PVAc chains and solvated layer formation on graphene oxide sheets surface, which weakens the interlaminar attraction of GO sheets. This approach presents a facile route for the preparation of dispersible GO and shows great potential in the preparation of graphene-based composites by solution-processes.

Novel Complex Polymers with Carbazole Functionality by Controlled Radical Polymerization

This review summarizes recent advances in the design and synthesis of novel complex polymers with carbazole moieties using controlled radical polymerization techniques. We focus on the polymeric architectures of block copolymers, star polymers, including star block copolymers and miktoarm star copolymers, comb-shaped copolymers, and hybrids. Controlled radical polymerization ofN-vinylcarbazole (NVC) and styrene and (meth)acrylate derivatives having carbazole moieties is well advanced, leading to the well-controlled synthesis of complex macromolecules. Characteristic optoelectronic properties, assembled structures, and three-dimensional architectures are briefly introduced.

Living Radical Polymerization by the RAFT Process – A Third Update

This paper provides a third update to the review of reversible deactivation radical polymerization (RDRP) achieved with thiocarbonylthio compounds (ZC(=S)SR) by a mechanism of reversible addition-fragmentation chain transfer (RAFT) that was published in June 2005 (Aust. J. Chem. 2005, 58, 379). The first update was published in November 2006 (Aust. J. Chem. 2006, 59, 669) and the second in December 2009 (Aust. J. Chem. 2009, 62, 1402). This review cites over 700 publications that appeared during the period mid 2009 to early 2012 covering various aspects of RAFT polymerization which include reagent synthesis and properties, kinetics and mechanism of polymerization, novel polymer syntheses, and a diverse range of applications. This period has witnessed further significant developments, particularly in the areas of novel RAFT agents, techniques for end-group transformation, the production of micro/nanoparticles and modified surfaces, and biopolymer conjugates both for therapeutic and diagnostic applications.